Machine Vision Systems

$0.00

Sold Out

Specifications

Model				SV2-BE10G
Type				Encoder cable, Hi-flex robotic cable with battery
Length				10 m 32.8'
Note				for 50 to 750 W motor

Keyence OP-87605 Keyence

$0.00

Sold Out

Specifications

Model		OP-87605
Type		Display panel cable
Length		20 m 65.6'
Cable min. bending R		24 mm 0.94"
Environmental resistance	Enclosure rating	None
Material		PVC
Weight		Approx. 1,400 g

Keyence KV-N1AW Keyence

$444.17

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-SS02A Keyence

$1,331.10

Only 9 units left

Buy the Keyence FD-SS02A - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FD-SS02A is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence SI-F80U Keyence

$0.00

Sold Out

Specifications

Model		SI-F80U
Type		Thickness measurement type Spectrum unit
Measurement range		0.05 to 1.1 mm 0.002" to 0.04" ^*1 (Possible detection distance : 80 to 81.1 mm 3.15" to 3.19")
Light source		Infrared SLD Central wavelength 820 nm Output 0.6 mW Class 1 Laser product (IEC60825-1/FDA (CDRH) Part 1040.10^*2)
Spot diameter		ø20 µm ø0.000787"^*3
Linearity		±0.2 µm ±0.000008" ^*4
Resolution		0.001 µm ^*5
Sampling cycle		200 µs
Light source for guide		Red semiconductor laser Wavelength 655 nm Output 0.1 mW Class 1 Laser product (IEC60825-1/FDA (CDRH) Part 1040.10^*2)
LED display		Target near center of measurement range: green lights. Target within measurement range: orange lights. Target outside measurement range: Flashes orange.
Temperature fluctuation		0.01% of F.S./°C
Environmental resistance	Enclosure rating	-
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +35 °C 32 to 95 °F
	Relative humidity	35 to 80 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 0.5 mm 0.02", 2 hours in each of the X, Y, and Z directions
Material		Polycarbonate
Weight		Approx. 1 kg
^1 The thickness measurement type sensor head displays the measurement range for the distance between plates of glass. Ensure that the measurement target is within the possible detection distance range. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 Indicates the minimum beam spot diameter within the measurement range. ^4 This value is obtained by measuring the gap between two glass plates with the number of averaging measurements set to 256. ^*5 This value is obtained by measuring a 0.3 mm 0.01" thick glass target within the possible detection distance with the number of averaging measurements set to 4,096.

Keyence SJ-U3 Keyence

$477.23

Only 2 units left

Specifications

Model		SJ-U3
Rating	Rating input	100 to 240 VAC (50/60Hz)
	Rated output	24VDC 2.7A
Environmental resistance	Ambient temperature	0 to +35°C 32 to +95°F
	Relative humidity	20 to 80% (no condensation)
Weight		Approx. 260g

Keyence CB-A5E Keyence

$356.93

Only 1 unit left

Specifications

Model				CB-A5E
Length				5 m 16.40'
Weight				Approx. 400 g

Keyence EV-118USO(2066) Keyence

$0.00

Sold Out

Specifications

Model		EV-118USO(2066)^*1
Type		Non-shielded
Shape		M18
Detecting distance		15 mm 0.59" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		50 x 50 mm 1.97"
Hysteresis		20% max. of detecting distance, within -10 to +70°C 14 to 158°F
Response frequency		350 Hz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance, within -10 to +70°C 14 to 158°F
Control output (switching capacity)		5 to 200 mA
Protection circuit		Reversed polarity, short-circuit, surge voltage
Cable length		500 mm19.685"
Rating	Power voltage	12 to 24 VDC
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Case material		Nickel-plated brass
Weight		Approx. 140 g
^*1 This product does not comply with EMC directive.

Keyence OP-84411 Keyence

$0.00

Sold Out

Specifications

Model				OP-84411
Type				I/O connector terminal block
Applicable product				SV, KV-HC3
Cable end				26-pin
Note				Can be used with the MECHATROLINK-II type.

Keyence ER-M18FN Keyence

$0.00

Sold Out

Specifications

Model		ER-M18FN
Type		Compact all-metal shielded type Thin type t = 8 mm Cable NPN output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode		N.O.
Button		None
Button	Function	―
Detecting distance		10 mm 0.39" ±10% ^*2
Response frequency		50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less, Max. 50 mA
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1010 mW or less (43 mA or less at 24 V, 64 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing)
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material	Head	SUS316L, PBT Epoxy resin
	Amplifier	Header-to-amplifier cable: TPU, Case: PBT/TPU [Connector] Indicator: LCP, Connector metal: SUS303, Connector: LCP [Cable] Indicator: TPU, Power cable: PVC
	Accessories	―
Accessories
Weight		Approx. 125 g 4.41 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used.

Keyence ER-GL18N03C Keyence

$0.00

Sold Out

Specifications

Model		ER-GL18N03C
Type		General-purpose all-metal shielded type Screw type M18 Connector with pigtail (M12 4-pin) NPN output Long-Range
Power supply cable length		0.3 m 1.0' ^*1
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		None
Button	Function	―
Detecting distance		10 mm 0.39" ±10% ^*2
Response frequency		50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 100 mA or less for 1 output; 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 85 g 3.00 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence CA-00010AB Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence EH-910 Keyence

$487.34

Only 4 units left

Specifications

Model		EH-910
Type		Solvent resistant , Shielded , Cylindrical
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		10 x 10 mm 0.39" x 0.39"
Stable detecting range		0 to 2 mm0.08"
Maximum detecting distance		4.5 mm0.18"
Hysteresis		0.06 mm0.002"
Repeatability		0.005 mm0.0002"
Temperature characteristics		-10 to +15% max. of detecting distance at 23°C (73.4°F), within 0 to +60°C (32 to 140°F)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 53 g (including nuts and 3-m 9.8' cable)

Keyence GL-VM60HP Keyence

$1,142.64

Only 4 units left

Specifications

Model			GL-VM60HP
Beam axis spacing/Lens diameter			20 mm 0.79": ø5 ø0.197"
Number of beam axes			60
Total length			1200 mm 47.24"
Detection height			1180 mm 46.46"
Protection height			1225 mm 48.23"
Minimum detectable object size			ø25 mm ø0.98" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	6.3
		OFF→ON	50.2 ^*3
		All blocked→ON	59.0 ^*4
	With channel A or B	ON→OFF	19.1
		OFF→ON	70.2 ^*3
		All blocked→ON	97.0 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	134 ^*5
		Receiver	146 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	58 ^*5
		Receiver	63 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		780 g 27.53 oz
	Receiver		790 g 27.88 oz
	Total		1570 g 55.42 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence GL-VM28LP Keyence

$0.00

Sold Out

Specifications

Model			GL-VM28LP
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			28
Total length			1120 mm 44.09"
Detection height			1080 mm 42.52"
Protection height			1165 mm 45.87"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.0
		OFF→ON	48.6 ^*3
		All blocked→ON	55.4 ^*4
	With channel A or B	ON→OFF	13.7
		OFF→ON	60.8 ^*3
		All blocked→ON	79.6 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	123 ^*5
		Receiver	136 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	53 ^*5
		Receiver	59 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		730 g 25.76 oz
	Receiver		740 g 26.12 oz
	Total		1470 g 51.89 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence CA-DRR9 Keyence

$495.98

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DRM5DA Keyence

$0.00

Sold Out

Specifications

Model		CA-DRM5DA
Type		50 mm 1.97" type
Environmental resistance	Relative humidity	65%RH or less (No condensation)

Keyence OP-87280 Keyence

$492.57

Only 3 units left

Specifications

Model				OP-87280
Overview				Adapter converting G3/4 male connection aperture to R3/8 male of GP-M Series.
Applicable product				GP-M Series sensor main unit
Number included				1 pcs.
Connection port				G3/4 female and R3/8 male on respective side
Material				SUSXM7

Keyence CA-CM20 Keyence

$1,702.98

Only 3 units left

Buy the Keyence CA-CM20 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence CA-CM20 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence FD-R80 Keyence

$3,647.98

Only 5 units left

Specifications

Model		FD-R80
Supported pipe diameter		2 1/2" (65 A), ø64 to ø83 2.52" to 3.27" 3" (80 A), ø83 to ø100 3.27" to 3.94"
Supported pipe materials		Metal / resin^*1
Supported fluids		Various liquids (i.e. water, oils, chemicals)^*1
Supported fluid temperature		- 20 to + 120°C - 4.0 to + 248 °F (no freezing on the pipe surface)^*2
Maximum rated flow		Rated flow velocity range: 5.0 m/s Flow rate range (Typical): 2 1/2" (65 A): 1000 L/min 260 gal/min 60 m³/ h) 3" (80 A): 1500 L/min 390 gal/min 90 m³ / h
Zero cut flow rate		Zero cut: 0.3 m/s (default)^*3 Flow rate (Typical): 90 L / min 24 gal / min 5.4 m³/h
Display method		Dual row, 5-digit display with white, 14-segment LED; Large status indicator; Output indicators; Stability indicator; Unit indicator
Display update cycle		Approx. 3 Hz
Display resolution		1 (L / min)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s (variable)
Measurement accuracy		Between 20 and 100% of F.S. : ±2.0% of RD^4^5 Between 6 and 20% of F.S. : ±0.4% of F.S. ^4^5
Protection circuit		Power supply reverse connection protection, Power supply surge protection, Short-circuit protection for each output, Surge protection for each output
Zero point error		±0.5% of F.S.^4^6
Hysteresis		Variable
Flow units		L / min, m³ / h, gal / min
Integrated flow unit display		1 / 10 / 100 / 1000 / 10000 (L)
Pipe temperature measurement accuracy		±3°C ±5.4°F (liquid temperature of - 20 to + 50°C, - 4 to + 122°F) ±5°C ±9°F (liquid temperature of 50 to + 120°C, 122 to 248°F) (ambient operating temperature of 25°C 77°F)^*4
Wiring specifications	Power supply	DC power supply: M12 4-pin connector / AC power supply: M4 screw terminal block (selectable)
	I/O	When using a DC power supply: M12 4-pin connector / when using an AC power supply: M3 screw terminal block
Input/Output (Selectable)	Output (ch.1/ch.2)	Control output / Integrated pulse output / Error output / Temperature alarm, NPN / PNP setting switchable,open collector output 30 VDC or less, max. 100 mA / ch., residual voltage: 2.5 V or less^*7
	Analog output (ch.1/ch.2)	Flow rate analog output / Temperature analog output and 4 - 20 mA / 0 - 20 mA (selectable), load resistance: 500 Ω or less^*7
	External input (ch.2)	Integrated flow reset input / Flow rate zero input / Origin adjustment input (selectable), short-circuit current: 1.5 mA or less, input time: 20 ms or more^*7
Rating	Power voltage	20 to 30 VDC including 10% ripple (P-P), Class 2 / 100 to 240 VAC - 15% or + 10% (50 / 60 Hz)
	Current consumption	When using a DC power supply: 200 mA or less (load current excluded), 400 mA or less (load current included) When using an AC power supply: 15 VA or less
Environmental resistance	Enclosure rating	IP65 / 67 (IEC60259), IP69K (ISO20653), Enclosure Type 4X (NEMA250)
	Ambient temperature	- 20 to + 60°C - 4.0 to 140 °F (no freezing)^*2
	Relative humidity	5 to 90%RH (no condensation)
	Vibration resistance	10 to 55 Hz, compound amplitude 1.5 mm 0.06", XYZ axes 2 hours for each axis
	Shock resistance	100 m/s² , 16 ms pulse, XYZ axes, 1000 times for each axis
Dimensions		Main unit size: 218.5 mm × 66.9 mm × 70.7 mm 8.60" × 2.63" × 2.78"
Material	Main unit	Body: aluminum die-casting + coating / PPS, display: reinforced glass, connectors: SUS304-equivalent
	Unit rear	Rubber
	Upper/lower bracket	SUS304
Weight		Main unit: Approx. 1.0 kg Upper/lower bracket: Approx.2.0 kg (including sub unit)
^1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Detection may be unstable due to the type and status of the pipes. ^2 Perform derating depending on the ambient temperature and liquid temperature when using an AC power supply. ^3 The zero cut flow rate can be changed in the settings. ^4 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by the type and status of the pipes, the type and temperature of the fluid, and the zero cut flow rate. ^5 This is the value when considering linearity + span error + repeatability in a stable environment of 25°C 77°F. ^6 It is possible to enhance the precision of zero point error by performing an origin adjustment. ^*7 IO-Link: Compatible with Specification v1.1 / COM2 (38.4 kbps) The setting file can be downloaded from the KEYENCE website. If using the unit in an environment where downloading the file is not accessible via Internet, contact your nearest KEYENCE office. IO-Link is either registered trademarks or trademarks of PROFIBUS Nutzerorganisation e.V. (PNO)

Keyence PJ-S12 Keyence

$424.29

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-51459 Keyence

$0.00

Sold Out

Specifications

Model				OP-51459
Overview				Front protective cover protecting detection side of light curtain.
Applicable product				SL-V55F, SL-V28H, SL-V14L, SL-C28H, SL-C14L
Number included				1 pcs.
Length				550.3 mm 21.67"
Material				Translucent plastic: Polycarbonate (t=Approx. 1.10mm), Black plastic: ABS
Note				To install this product on both the transmitter and receiver, 2 sets are required. Use the dimming filters (sold separately) by attaching them to the front protection cover. When the front protection cover is attached, the L-shaped mounting bracket (OP-42

Keyence N-410 Keyence

$740.63

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LS-9030M Keyence

$0.00

Sold Out

Specifications

Model		LS-9030M^*1
Type		Head: Standard model
Measurement range		0.3 mm (0.08 mm) to 30 mm 0.01" (0.003") to 1.18"
Smallest detectable object		0.3 mm (0.08 mm) 0.01" (0.003")
Transmitter/receiver distance		160 ±40 mm 6.3" ±1.57"
Repeatability		±0.1 µm 0.000004"^*2
Measurement accuracy		±2 µm 0.000079"^*3
Sampling cycle		16,000 samples/sec.^*4
Transmitter/receiver direction and position detection	Detection area	20 x 24 mm 0.79" x 0.94"
	Smallest detectable object	0.3 mm 0.01"
	Repeatability	±0.2 mm 0.01"^*5
	Sampling cycle	4,000 samples/sec.
Light source		InGaN green LED
Monitor camera		Provided
Environmental resistance	Enclosure rating	IP67 (including connector)
	Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	15 G/6 ms
Material		Aluminum
Weight		Transmitter: Approx. 440 g Receiver: Approx. 500 g Base: Approx. 430 g
^1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office. ^2 A ±2σ margin of error when measuring a ø10 mm ø0.39" rod in the center of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. ^3 Margin of error when a moving ø10 mm ø0.39" rod is measured in the 10 mm x 20 mm 0.39" x 0.79" measurement area using outer diameter mode. ^4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function. ^*5 A ±2σ margin of error when measuring the position of a ø10 mm ø0.39" rod in the center of the measurement area with the average measurement number set as 512 times.