Machine Vision Systems

$936.00

Only 1 unit left

Specifications

Model				GL-SA28F
Type				Protection cover Flat type for 28 beam axes
Overview				This protective case protects the main unit from impacts.
Applicable product				GL-S28FH
Number included				1
Length				582.6 mm 22.94"
Material				aluminum
Note				2 each of the following are included: hexagon socket head cap screw (width across flats: 3 mm), washer, and special hexagon socket head cap screw (M4, length: 13 mm, width across flats: 3 mm).
Weight				190 g

Keyence GL-S40SH Keyence

$1,806.06

Only 5 units left

Specifications

Model				GL-S40SH
Type				Slim type
Detection capability				ø25 mm ø0.98"
Total length				819.5 mm 32.26"
No. of beam				40
Detection height				780mm 30.71"
Protection height				826mm 32.52"
Beam axis spacing				20 mm 0.79"
Operating distance				0.1 to 2 m 0.3' to 6.6'
Effective aperture angle				Max. ±3.75° (when the operating distance is 2 m 6.6')
Light source				Infrared LED (870 nm)
Response time(ms)	Wire synchronization, one-line, or optical synchronization system (channel 0)	ON→OFF		8.7 ^*1
		OFF→ON		51.9 ^1 ^2
		All blocked→ON		71.8 ^1 ^3
	Optical synchronization system (channel A or B)	ON→OFF		12.3 ^*1
		OFF→ON		57.2 ^1 ^2
		All blocked→ON		85.8 ^1 ^3
OSSD operation				Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver				Optical synchronization or wire synchronization (determined by the wiring)
Light interference prevention function				Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output type			2 transistor outputs (PNP or NPN output is determined by the cable type.)
	Max. load current			Max. 300 mA
	Residual voltage (when ON)			Max. 2.5 V (with a cable length of 5 m 16.4')
	OFF state voltage			Max. 2.0 V (with a cable length of 5 m 16.4')
	Leakage current			Max. 200 µA
	Max. load capacitance			2.2 µF
	Load wiring resistance			Max. 2.5 Ω
Inputs 1 and 2				Short-circuit current: approx. 1 mA
Power supply	Current consumption(mA)	When the center indicator is ON	Transmitter	50^*4
			Receiver	76^*4
		When the center indicator is OFF	Transmitter	30^*4
			Receiver	55^*4
	Power voltage			24 VDC ±20%, ripple (P-P) 10% or less, Class 2
Protection circuit				Reverse current protection, short-circuit protection and surge protection for each output
Approved standards	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety			IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1: 2015 (Category 4, PLe) UL508, UL1998 GB/T4584
Environmental resistance	Enclosure rating			IP65/IP67 (IEC60529)
	Overvoltage category			II
	Ambient light			Incandescent lamp: 3,000 lux or less, Sunlight: 20,000 lux or less
	Operating ambient temperature			-10 to +50 °C 14 to 122 °F (No freezing)
	Operating relative humidity			15 to 85 % RH (no condensation)
	Storage temperature			-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity			15 to 95 % RH
	Vibration resistance			10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance			100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case			Polyarylate
Weight	Transmitter			305 g
	Receiver			310 g
^1 If the response time (ON to OFF) exceeds 18 ms, this unit cannot be used as a certified product based on the Chinese standard GB/T4584 “压力机用光电保护装置技术条件”. In the case of series connection, if the total number of beam axes exceeds 100, the response time must be limited to 30 ms or less. When the GL-S units are connected in series, the response time is calculated according to the following steps; 1. Sum up the response time of all unit. 2. Subtract the following time from the result of previous step. (ON → OFF) One sub unit connected: 2 ms Two sub units connected: 4.2 ms (When using Optical synchronization system and Channel A or B) One sub unit connected: 2.7 ms Two sub units connected: 5.7 ms (OFF → ON) One sub unit connected: 42 ms Two sub units connected: 84 ms ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-S operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-S synchronizes the transmitter and receiver first and then determines the clear or blocked. ^4 The control output (OSSD) current is not included. When inputs are turned ON, the current consumption increases by 1 mA per input.

Keyence SJ-M070 Keyence

$3,231.59

Only 9 units left

Specifications

Model		SJ-M070
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Supply pressure range		0.2 MPa or less
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Effective length		324 mm12.756"
Total length		380 mm14.961"
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 65 % RH (No condensation)
Weight		Approx. 720 g
^*1 Please make an inquiry as to the measurement condition.

Keyence CA-E200L Keyence

$1,639.96

In stock, 12 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MV-M75 Keyence

$3,010.77

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-H132A Keyence

$1,738.55

Only 2 units left

Specifications

Model		SJ-H132A
Type		HA
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method/applied voltage		Pulse AC method, ±7000 V
Ion balance control method		Dual I.C.C. method
Ion balance		±30 V ^*1
Operating distance		50 to 2000 mm 1.97" to 78.74"
Control input		NPN open collector or contact point signal without voltage
Control output		NPN photo relay, Maximum 100 mA max. (40 V or less)
Major functions		Condition alarm, ion level alarm, alarm output
Air purge connection port		Rc 1/8
Air purge supplied pressure		0.5 MPa or less ^*2
Effective length		1320 mm 51.97" ^*3
No. ofelectrodes		20
Static elimination bar length		1280 mm 50.39"
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	500 mA (at 24 V), 350 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	35 to 85% RH (no condensation)
Material	Electrode probe	Tungsten
	Main unit	ABS/PC
Weight	Static elimination bar	1400 g 49.38 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" (22 Hz), 600 mm 23.62" (10 Hz), 1500 mm 59.06" (1 Hz) Operating ambient temperature: 0 to +40°C 32 to 104°F Operating ambient humidity: 35 to 65% RH 0.3 m/s 1.3'/s downflow ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence EH-308 Keyence

$172.61

In stock, 54 units

Specifications

Model		EH-308
Type		Standard , Shielded , Cylindrical
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		10 x 10 mm 0.39" x 0.39"
Stable detecting range		0 to 2 mm0.08"
Maximum detecting distance		5 mm0.20"
Hysteresis		0.04 mm0.002"
Repeatability		0.005 mm 0.0002"
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -10 to +60°C 14 to 140°F
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 47 g (including 3-m 9.8' cable)

Keyence FD-MA5A Keyence

$990.96

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LX2-V10W Keyence

$469.50

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV3-M200AS Keyence

$0.00

Sold Out

Specifications

Model				SV3-M200AS
General specifications	Applicable servo amplifier			SV3-200L2
	Rated output			1.8k W
	Rated torque			11.5 N·m ^*1
	Instant maximum torque			28.7 N·m
	Rated current			16.7 Arms
	Instant maximum current			42 Arms
	Rated rotation speed			1,500 min^-1
	High rotation speed			4,000 min^-1
	Torque constant			0.748 N·m/Arms
	Rotor moment of inertia			26.0 ×10^-4 kg·m²
	Rated power rating			50.9 kW/s
	Rated angle acceleration			4,420 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		26 bit
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or higher)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20% to 80% RH (No condensation)
		Operating atmosphere		Indoors (No corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2,000 m 6,561.7' or less (reduced ratings at 1,000 m 3,280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8 ft/s² with servo motor flange surface as reference (up/down, left/right) 24.5 m/s² 80.4 ft/s² (forward/backward)
		Impact resistance		490 m/s² 1,607.6 ft/s² with servo motor flange surface as reference, 2 times
	Isolation rank			Class F
	Min. insulation resistance			500 VDC 10 MΩ or more with insulation resistance meter
	Isolation voltage tolerance			1,500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part 15 B, ICES-003. Class A
	Allowable load inertia moment			5×
	Approx. weight			8.6 kg 18.96 lb
^*1 50 W to 750 W rated torque is continuously allowable with an ambient temperature of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W/100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with an ambient temperature of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink.

Keyence CV-X272FP Keyence

$5,776.00

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SZ-P20NS Keyence

$0.00

Sold Out

Specifications

Model				SZ-P20NS
Type				Output Cable, NPN
Applicable product				SZ-01S
Length				20 m 65.62'
Weight				Approx. 1,040 g

Keyence GL-SS5 Keyence

$0.00

Sold Out

Specifications

Model				GL-SS5
Type				Standard cable
Applicable product				GL-S Series main unit
Number included				1
Cable end				Main unit connection connector - Main unit connection connector
Length				5 m 16.40'
Note				Use this with one-line systems and series connections.
Weight				150 g

Keyence OP-88038 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-M040AK Keyence

$0.00

Sold Out

Specifications

Model				SV2-M040AK
General specifications	Applicable servo amplifier			SV2-040L2
	Rated output			400 W
	Rated torque			1.27 N·m ^*1
	Instant maximum torque			4.46 N·m
	Rated current			2.5 Arms
	Instant maximum current			9.3 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.544 N·m/Arms
	Rotor moment of inertia			0.486 ×10^-4kg·m²
	Rated power rating			33.1 kW/s
	Rated angle acceleration			26100 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			10 ×
	Approx. weight			1.1 kg
^*1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink.

Keyence MD-F3100C Keyence

$25,375.00

Only 2 units left

Specifications

Model		MD-F3100C
Type		30 W type standard area type main unit (controller + head)
Console (sold separately)		MC-P1
Marking method		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	Yb: fiber laser, Class 4 laser product (IEC 60825-1, JIS C6802, FDA [CDRH] Part 1040.10^*1)
	Wavelength	1090 nm
	Output	30 W
Pulse frequency		60 to 120 kHz
Guide laser/Working distance pointer		Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 laser product (IEC 60825-1, JIS C6802, FDA [CDRH] Part 1040.10^*1)
Marking area		120 x 120 x 42 mm 4.72" x 4.72" x 1.65"
Standard working distance (±variable width)		168 mm (± 21 mm) 6.614"(± 0.827")
Marking resolution		2 µm 0.08 Mil
Scan speed		12000 mm 472.44"/s max.
Character type	Font	KEYENCE original font (numerical value, alphabet, katakana, hiragana, and kanji)/user font/true type font
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/EAN/UPC/CODE128
	2D code	QR code/micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar Truncated/GS1 DataBar Truncated CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBarLimited/GS1 DataBar Limited CC-A
	Logo image	Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Machinery operation	Fixed point/straight line/dashed line/oval
Marking conditions	Workpiece style	Stationary marking/movement marking (constant speed/encoder)
	Character size (marking height/width)	0.1 to 120 mm 0.003" to 4.72"
	No. of registered programs	2000 settings max.
	No. of program blocks	256 blocks
I/O (Input/output)		Terminal block I/O, MIL connector I/O, contactor control I/O
Interface		RS-232C, RS-422A, USB 2.0,^*2 Ethernet (100BASE-TX/10BASE-T)
CF memory card slot		Compact flash memory card^*3
Head installation direction		All directions
Head cable length		4m
Cooling method		Controller: forced air cooling, head: natural air cooling
Rated voltage and power consumption		Single-phase 100 to 120/200 to 240 VAC ±10 %, 50/60 Hz, Max. 550 VA
Environmental resistance	Enclosure rating	IP64 (Head)
	Pollution degree	2
	Overvoltage category	II
	Ambient temperature for storage	-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature	0 to +40 °C 32 to 104 °F
	Ambient humidity for storage	30 to 85 % RH (No condensation)
	Relative humidity
Weight		Controller: 27.0 kg Head: 6.7 kg Console: 1.4 kg
^1 The laser classification is implemented based on IEC 60825-1 in accordance with the requirements of FDA [CDRH] Laser Notice. ^2 The USB port is dedicated for use with the PC software. ^*3 SanDisk cards are recommended.

Keyence KV-R8X Keyence

$940.59

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X302F Keyence

$9,146.16

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence HR-UC1 Keyence

$398.34

In stock, 12 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-XL202 Keyence

$1,114.63

Only 7 units left

Specifications

Model		KV-XL202
Type		Serial communication unit
Communication standard		RS-232C
Connection interface		European terminal block with 7 poles (detachable) × 2 ports
Transmission specifications	Electrical termination (terminator)	-
	Transmission rate	1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bps
	Transmission method	Full duplex
	Data format	Start bit: 1 bit Data bit: 7 bits, 8 bits Stop bit: 1 bit, 2 bits
	Error detection	Parity: Even, odd, none
	RS/CS flow control	ON or OFF
	Transmission distance	15 m 49.2'
	Number of transmission units	1
Connectable CPU unit		KV-X Series/KV-8000A
Refresh		Automatic refresh, direct refresh, inter-unit synchronization refresh
Serial communication functions		Non-procedure, PROTOCOL STUDIO, Modbus slave, etc.
Serial communication function execution methods		Ladder program, unit program (flow)
Unit program capacity		3 MB (Max. number of blocks: Approx. 20000)
flow	Max. number of flows	256
	Number of simultaneous activities	Unlimited
Flow	Internal data Memory	524288 words
PROTOCOL STUDIO	Transmission method	Cyclic communication: Tx + Rx, Tx only, Rx only Event communication: Tx + Rx, Tx only, Rx only, Tx + Continuous Rx, Break Tx
	Max. number of connected devices	2
	Max. number of communication commands	48/96^*1
	Maximum number of total frames	Rx: 48/96^1 × 16; Tx: 48/96^1 × 1
	Max. number of compared received frames	16 per command
	Maximum number of block elements	96 per frame
	Transmission data length	1 to 2048 bytes per frame
	Reception data length
PLC link	Communication patterns	Write, read, transfer
	Number of link settings	512 settings max.^*2
	Link data size	1440 words max. per setting (bit: 720 words, word: 720 words) 737280 words max. (total) (1440 words × 512 settings)
	Data unit	1 word
	Number of connected models	2 models max. (1 model × 2 ports)
	Number of connected units	2 max. (1 unit × 2 ports)
	Trigger types	Cyclic/event (64 settings max. for event^*2)
	Update interval	10 to 65535 ms
Internal current consumption		140 mA or less
Weight		Approx. 200 g
^1 The max. is 48 when “Standard” is set for the number of communication commands in Unit Editor and 96 when “Extended” is set. ^2 Total for one KV-XL202/XL402 unit.

Keyence CA-DC60E Keyence

$740.03

In stock, 20 units

Specifications

Model		CA-DC60E
Type		Lighting power supply
Output	Light control method	Constant current control mode
	Intensity range	1,024-step digital gradation (switchable settings using controller)
	Connection points	2ch (Dedicated 12-pole connector)
	Synchronization	Camera trigger and shutter synchronization^*1
	Response speed	1 ms or less
Display	LED display	Power / Lighting status (2ch each)
Rating	Power voltage	24 VDC +25%, -20%
	Current consumption	5.7A (at 19.2VDC)/4.6A (at 24VDC) ^*2
Environmental resistance	Ambient temperature	0 to 45°C 32 to 113°F (DIN rail-mounted) / 0 to 40°C 32 to 104°F (bottom-mounted) ^*3
	Relative humidity	85%RH or less (No condensation) ^*3
Weight		Approx. 500 g
^1 Continuous lighting (single-color lighting in all directions) can only be set when the brightness value control is set to ON. ^2 Including the current supplied to the light-emitting unit. ^*3 Environmental resistance for lights includes an operating ambient temperature of 0 to 40°C 32 to 104°F and an operating ambient humidity of 65%RH or less (with no condensation).

Keyence ED-118U Keyence

$394.82

Only 4 units left

Specifications

Model		ED-118U
Type		Non-shielded
Shape		M18Threaded type
Detecting distance		11 mm 0.43" ±15%
Detectable object		All metals ^*1
Standard target (aluminum, t=1 mm 0.04")		50 x 50 mm 1.97"
Hysteresis		15% max. of detecting distance
Response frequency		200 Hz
Operation mode		N.O.
Indicator lamp		Operation indicator: Red LED, Stable operation indicator: Green LED
Temperature characteristics		±20% max. of detecting distance at 23°C 73.4°F, within 0 to 50°C 32 to 122°F
Control output		NPN open collector 100 mA max. (40 V max.), Residual voltage: 1 V max.
Protection circuit		Reversed polarity, surge absorber
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	35 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 3 times in each of the X, Y, and Z directions
Case material		Nickel-plated brass
Accessories		Screw nut x 2, toothed washer x 1
Weight		Approx. 140 g (including 2-m 6.6' cable and nuts)
^*1 When detecting ferrous metals, the detecting distance may decrease.

Keyence OP-84456 Keyence

$0.00

Sold Out

Specifications

Model				OP-84456
Type				30-pin MIL connector
Applicable product				GT2-100 Series
Note				Expansion board version sold separately, connector and contact

Keyence AP-V42AW Keyence

$0.00

Sold Out

Specifications

Model		AP-V42AW
Type		Amplifier Unit, NPN
Applicable sensor head		AP-41M, AP-41, AP-43, AP-44
Set and display range		-15 to +110 % of F.S.^*1
Display		4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18"), AI indicator (green), Display cycle: 10 times/s
Operation indicator		Red LED x 2 (corresponding to control output 1 and 2)
Repeatability		±0.2 % of F.S.
Display resolution		AP-41M/41/44: Standard mode 0.1 inchHg, High-resolution/Focus mode 0.01 inchHg AP-43: Standard mode 0.01 kgf/cm², High-resolution/Focus mode 0.02 Psi
Power consumption	Normal	12 V: 720 mW (60 mA) max., 24 V: 960 mW (40 mA) max.
	Eco mode	12 V: 480 mW (40 mA) max., 24 V: 720 mW (30 mA) max.
Display temperature characteristic		±1 % of F.S. max.
Hysteresis		Variable (Standard: 0.5 % of FS; high-resolution/focus mode: 0.1 % of F.S.)
Response time (Chattering prevention function)		1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable)
I/O	Analog output	-
	Zero-shift input	Input time: 2 ms or more. (or analog output selectable)
	Control output	NPN open collector 20 mA max. (at 40 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Polycarbonate
Accessories		End Unit，Head Connector, and Expansion seal
Weight		Approx. 80 g (with 2-m 6.6' cable)
^*1 The focus range applies while in focus mode only.