Linear Position Sensors

$344.69

Only 2 units left

Specifications

Model				GT2-CHL2M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 L-shaped type - e-con
Length				2 m 6.56'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit). Only the 12 mm type of the L-shape types can be used.
Weight				Approx. 80 g

Keyence GT2-71N Keyence

$354.02

In stock, 12 units

Specifications

Model		GT2-71N
Mounting method		DIN-rail mount
Output		NPN output
Main unit/expansion unit		Main unit
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		-
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 140 g (including power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-75P Keyence

$426.39

In stock, 15 units

Specifications

Model		GT2-75P
Mounting method		Panel mount
Output		PNP output
Main unit/expansion unit		Main unit
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Power supply/I/O cable		12-core connector connection (Connecting cable included)
Weight		Approx. 140 g (including panel mounting bracket, protective front cover and power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-72CP Keyence

$402.26

In stock, 13 units

Specifications

Model		GT2-72CP
Mounting method		DIN-rail mount
Output		PNP output
Main unit/expansion unit		Expansion unit^*1
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		-
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 70 g
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-71P Keyence

$390.20

In stock, 11 units

Specifications

Model		GT2-71P
Mounting method		DIN-rail mount
Output		PNP output
Main unit/expansion unit		Main unit
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		-
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 140 g (including power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT-A10L Keyence

$912.34

Only 2 units left

Specifications

Model		GT-A10L
Type		Sensor head: Low-stress Air push models
Measuring range		10 mm 0.39"
Measuring force	Downward mounting	0.3 N^*1
	Side mounting	0.25N^*1
	Upward mounting	0.2 N^*1
Repeatability		3 µm 0.00012" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	-
	Pressure resistance	1.0 MPa
	Applied pressure range	0.35 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 stainless steel, Cylinder: Aluminum alloy, Plastic section of air joint: Polyacetal, Metal section of air joint: Nickel-plated brass, Indicator: Polyarylate, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 150 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range at ambient temperature of 23 °C 73 °F with the response time set to 100 ms.

Keyence GT2-H12L Keyence

$547.02

Only 7 units left

Specifications

Model		GT2-H12L
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*1
Measuring force	Downward mounting	0.4 N^*2
	Side mounting	0.3 N^*2
	Upward mounting	0.2 N^*2
Sampling cycle		1 ms
Mechanical response		4 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body cast: Zinc die-casting, Indicator: Polyarylate
	Dust boot	-
	Contact	TYPE304, 440C Stainless steel^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 95 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT2-A12KL Keyence

$495.53

In stock, 12 units

Specifications

Model		GT2-A12KL
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*1
Measuring force	Downward mounting	0.4 N^*2
	Side mounting	0.3 N^*2
	Upward mounting	0.2 N^*2
Sampling cycle		1 ms
Fluid used		Dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Pressure resistance	1 MPa
	Applied pressure range	0.25 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: Zinc die-casting; Cylinder part: Aluminium alloy; Air joint resin part: Polyacetal; Air joint metal part: Brass nickel plating; Indicator: Polyarylate
	Dust boot	-
	Contact	TYPE304 Stainless steel, super-tough tungsten alloy^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 145 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Balluff BTL7-S561B-M0252-Z-MB357-KA002-ZA11 Balluff

$0.00

Sold Out

Balluff BTL7 Micropulse Magnetostrictive Linear Position Sensor Rod Style (P/N: BTL7-S561B-M0252-Z-MB357-KA00,2-ZA11). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL7-E570-M0457-K-SR32 Balluff

$998.55

Only 2 units left

Balluff BTL7 Micropulse Magnetostrictive Linear Position Sensor (P/N: BTL7-E570-M0457-K-SR32). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL5-M1-M3450-R-S32 Balluff

$0.00

Sold Out

Balluff BTL5 Micropulse Magnetostrictive Linear Position Sensor (P/N: BTL5-M1-M3450-R-S32). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL5-A11-M0152-Z-S32 Balluff

$766.80

Only 6 units left

Balluff BTL5 Micropulse Magnetostrictive Linear Position Sensor Rod Style (P/N: BTL5-A11-M0152-Z-S32). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL5-A11-M1651-R-S32 Balluff

$0.00

Sold Out

Balluff BTL5 Micropulse Magnetostrictive Linear Position Sensor Rod Style (P/N: BTL5-A11-M1651-R-S32). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL7-E570-M0457-Z-SA418-S32 Balluff

$0.00

Sold Out

Balluff BTL7 Micropulse Magnetostrictive Linear Position Sensor (P/N: BTL7-E570-M0457-Z-SA418-S32). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL5-H112-M2000-P-S94 Balluff

$0.00

Sold Out

Balluff BTL5 Micropulse Magnetostrictive Linear Position Sensor (P/N: BTL5-H112-M2000-P-S94). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL7-E500-M0675-W-KA05-S32 Balluff

$0.00

Sold Out

Balluff BTL7 Micropulse Magnetostrictive Linear Position Sensor Linear Inductive Encoder (P/N: BTL7-E500-M0675-W-KA05-S32). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL7-S561B-M0329-Z-MA357-KA002-ZA11 Balluff

$0.00

Sold Out

Balluff BTL7 Micropulse Magnetostrictive Linear Position Sensor Rod Style (P/N: BTL7-S561B-M0329-Z-MA357-KA00,2-ZA11). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL7-P511-M0102-P-SA442-S32 Balluff

$0.00

Sold Out

Balluff BTL7 Micropulse Magnetostrictive Linear Position Sensor (P/N: BTL7-P511-M0102-P-SA442-S32). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL7-S561B-M0113-Z-MB357-KA002-ZA11 Balluff

$0.00

Sold Out

Balluff BTL7 Micropulse Magnetostrictive Linear Position Sensor Rod Style (P/N: BTL7-S561B-M0113-Z-MB357-KA00,2-ZA11). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL5-A10-M0203-R-SA398-ZA1LPK51 Balluff

$0.00

Sold Out

Balluff BTL5 Micropulse Magnetostrictive Linear Position Sensor (P/N: BTL5-A10-M0203-R-SA398-ZA1L/PK51). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL5-A11-M0051-P-S32US Balluff

$0.00

Sold Out

Balluff BTL5 Micropulse Magnetostrictive Linear Position Sensor Rod Style (P/N: BTL5-A11-M0051-P-S32/US). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL7-E501-M0250-B-SA316-KA05 Balluff

$0.00

Sold Out

Balluff BTL7 Micropulse Magnetostrictive Linear Position Sensor Linear Inductive Encoder (P/N: BTL7-E501-M0250-B-SA316-KA05). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL6-A110-M1220-A1-S115 Balluff

$960.00

Only 2 units left

Balluff BTL6 Micropulse Magnetostrictive Linear Position Sensor Rod Style (P/N: BTL6-A110-M1220-A1-S115). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.

Balluff BTL7-E500-M0675-W-K002-S32 Balluff

$0.00

Sold Out

Balluff BTL7 Micropulse Magnetostrictive Linear Position Sensor Linear Inductive Encoder (P/N: BTL7-E500-M0675-W-K00,2-S32). Non-contact absolute position measurement using magnetostrictive technology with contactless magnets. Provides highly accurate, wear-free linear position feedback for hydraulic cylinders, injection molding, presses, and CNC machines. Analog, SSI, IO-Link, or Profinet output with up to 2µm resolution.