Contact Displacement Sensors

$380.67

Only 5 units left

Specifications

Model		GT-75A
Type		Amplifier unit
Mounting method		Panel mount
Output		NPN output
Main unit/expansion unit		Main unit^*1
Power consumption	Normal	At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less
	Power saving (Eco)	At 12 V: 600 mW (50 mA) or less, At 24 V: 840 mW (35 mA) or less
Display power	Measured value display	6-digit 7-segment LED (red)
	Other displays	2-color 13-level bar LED display (red, green), indicators (red, green)
Display range		-99.999 to 999.999
Display resolution		1 µm 0.000039"
Sampling rate		2,000 times/second
Control input	Timing/preset/bank input	Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more Preset/Bank input: Non-voltage input (relay contact, solid state), input time: 20 ms or more
Response time		hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s
HIGH, GO, LOW output		NPN open collector, 50 mA max. (40 V or less), residual voltage: 1 V or less, N.O./N.C. switchable
Major functions		Preset, Hold, Variable hysteresis, Variable response time, Multiplier setting, Bank function (4 banks), Self-timing, Power save (eco) mode, Application mode, Calibration function, Core alarm
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less^*2
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: Polycarbonate, Cable: PVC
Accessories		Panel mounting bracket, protective front cover, power cable, instruction manual
Weight		Approx. 110 g (: including panel mounting bracket, protective front cover, power cable)
^1 One main unit and nine expansion units (ten in total) can be additionally installed. For additional amplifier unit installation, each output current must be 20 mA or less. ^2 If additional amplifier units are installed, the power supply voltage is 24 VDC.

Keyence GT2-CH5M Keyence

$176.52

Only 8 units left

Specifications

Model				GT2-CH5M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 straight - e-con
Length				5 m 16.40'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 190 g

Keyence GT2-H50 Keyence

$957.15

In stock, 18 units

Specifications

Model		GT2-H50
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		50 mm 1.97"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		3.5 µm 0.14 Mil (p-p)^*1
Measuring force	Downward mounting	3.2 N^*2
	Side mounting	2.8 N^*2
	Upward mounting	2.4 N^*2
Sampling cycle		1 ms
Mechanical response		7 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Materials	Main body	Main body cast: Zinc die-casting, Indicator: Polyarylate, Dust boot: NBR
	Dust boot	NBR
	Contact	TYPE304, 440C Stainless steel^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 320 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT-A10 Keyence

$836.54

In stock, 12 units

Specifications

Model		GT-A10
Type		Sensor head: Air push models
Measuring range		10 mm 0.39"
Measuring force	Downward mounting	1.0 N^*1
	Side mounting	0.9 N^*1
	Upward mounting	0.8 N^*1
Repeatability		3 µm 0.00012" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	IP67^*3
	Pressure resistance	1.0 MPa
	Applied pressure range	0.35 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 stainless steel, Cylinder: Aluminum alloy, Plastic section of air joint: Polyacetal, Metal section of air joint: Nickel-plated brass, Indicator: Polyarylate, Dust boot: NBR, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 150 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range at ambient temperature of 23 °C 73 °F with the response time set to 100 ms. ^*3 To ensure you achieve the rating, connect the air tube to the air outlet joint and prevent foreign matter from entering it through the joint.

Keyence GT2-CH10M Keyence

$216.12

Only 9 units left

Specifications

Model				GT2-CH10M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 straight - e-con
Length				10 m 32.81'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 360 g

Keyence GT2-P12KL Keyence

$788.28

In stock, 12 units

Specifications

Model		GT2-P12KL^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*2
Measuring force	Downward mounting	0.2 N^*3
	Side mounting	0.15 N^*3
	Upward mounting	0.1 N^*3
Sampling cycle		4 ms
Mechanical response		4 Hz^*2
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot	-
	Contact	SUS304, cemented tungsten carbide^*4
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*5
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C 68 °F. ^3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^4 The contact is included with the sensor. ^*5 Including the relay connector.

Keyence GT2-71D Keyence

$3,098.67

In stock, 14 units

Specifications

Model		GT2-71D
Mounting method		DIN rail mount
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2
Rating	Power consumption	1,600 mW or less (at 30 V: 53.3 mA or less)
Number of expandable units		Cannot be extended
Indicator lamp		Power (green), alarm (red), pulse output (green), input (green)
Pulse resolution		0.1 μm 0.004 Mil, 0.5 μm 0.02 Mil, 1 μm 0.04 Mil, 10 μm 0.039 Mil (selectable)
Minimum phase difference		0.5 μs, 2.5 μs, 5 μs, 25 μs (selectable)
Control input	origin return	No-voltage input (with contacts, without contacts), input time: 20 ms or more
Output signal		90 ° phase difference from the A, B, and Z phases; differential square wave (conforms to EIA-422)
Output signal level		+5 V
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Polycarbonate (PC)
Weight		Approx. 110 g (including the power supply cable)

Keyence GT2-A12L Keyence

$495.53

Only 9 units left

Specifications

Model		GT2-A12L
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*1
Measuring force	Downward mounting	0.4 N^*2
	Side mounting	0.3 N^*2
	Upward mounting	0.2 N^*2
Sampling cycle		1 ms
Fluid used		Dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Pressure resistance	1 MPa
	Applied pressure range	0.25 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: Zinc die-casting; Cylinder part: Aluminium alloy; Air joint resin part: Polyacetal; Air joint metal part: Brass nickel plating; Indicator: Polyarylate
	Dust boot	-
	Contact	TYPE304, 440C Stainless steel^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 145 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT2CHL5M Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GT-71A Keyence

$305.76

Only 5 units left

Specifications

Model		GT-71A
Type		Amplifier unit
Mounting method		DIN rail mount^*1
Output		NPN output
Main unit/expansion unit		Main unit^*2
Power consumption	Normal	At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less
	Power saving (Eco)	At 12 V: 600 mW (50 mA) or less, At 24 V: 840 mW (35 mA) or less
Display power	Measured value display	6-digit 7-segment LED (red)
	Other displays	2-color 13-level bar LED display (red, green), indicators (red, green)
Display range		-99.999 to 999.999
Display resolution		1 µm 0.000039"
Sampling rate		2,000 times/second
Control input	Timing/preset/bank input	Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more Preset/Bank input: Non-voltage input (relay contact, solid state), input time: 20 ms or more
Response time		hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s
HIGH, GO, LOW output		NPN open collector, 50 mA max. (40 V or less), residual voltage: 1 V or less, N.O./N.C. switchable
Major functions		Preset, Hold, Variable hysteresis, Variable response time, Multiplier setting, Bank function (4 banks), Self-timing, Power save (eco) mode, Application mode, Calibration function, Core alarm
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less^*3
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: Polycarbonate, Cable: PVC
Accessories		Instruction manual
Weight		Approx. 110 g (including the power cable)
^1 Be sure to mount the DIN rail mounting amplifier on a DIN rail (i.e. the unit should be mounted on the metal DIN plate itself). For additional amplifier unit installation, be sure to use the end unit (OP-26751). ^2 One main unit and nine expansion units (ten in total) can be additionally installed. For additional amplifier unit installation, each output current must be 20 mA or less. ^*3 If additional amplifier units are installed, the power supply voltage is 24 VDC.

Keyence GT2-H12LF Keyence

$1,666.24

Only 3 units left

Specifications

Model		GT2-H12LF
Detection system		Scale Shot System, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*1
Measuring force	Downward mounting	0.4 N^*2
	Side mounting	0.3 N^*2
	Upward mounting	0.2 N^*2
Sampling cycle		1 ms
Mechanical response		4 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: die-cast zinc, Indicator: polyarylate (PAR)
	Dust boot	-
	Contact	SUS304, SUS440C^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 100 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT-A22 Keyence

$691.77

In stock, 13 units

Specifications

Model		GT-A22
Type		Sensor head: Air push models
Measuring range		22 mm 0.87"
Measuring force	Downward mounting	1.5 N^*1
	Side mounting	1.4 N^*1
	Upward mounting	1.3 N^*1
Repeatability		8 µm 0.00031" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	IP67^*3
	Pressure resistance	1.0 MPa
	Applied pressure range	0.35 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 stainless steel, Cylinder: Aluminum alloy, Plastic section of air joint: Polyacetal, Metal section of air joint: Nickel-plated brass, Indicator: Polyarylate, Dust boot: NBR, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 180 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range at ambient temperature of 23 °C 73 °F with the response time set to 100 ms. ^*3 To ensure you achieve the rating, connect the air tube to the air outlet joint and prevent foreign matter from entering it through the joint.

Keyence GT2-72N Keyence

$426.39

In stock, 15 units

Specifications

Model		GT2-72N
Mounting method		DIN-rail mount
Output		NPN output
Main unit/expansion unit		Expansion unit^*1
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		-
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 140 g (including power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-CHL10M Keyence

$494.96

Only 5 units left

Specifications

Model				GT2-CHL10M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 L-shaped type - e-con
Length				10 m 32.81'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit). Only the 12 mm type of the L-shape types can be used.
Weight				Approx. 360 g

Keyence GT2-71MCP Keyence

$402.26

In stock, 11 units

Specifications

Model		GT2-71MCP
Mounting method		DIN-rail mount
Output		PNP output
Main unit/expansion unit		Main unit
Power supply voltage		20 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,700 mW max. (30 V, 90 mA max.)
	Power saving (Eco)	2,200 mW max. (30 V, 73.3 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		4 to 20 mA, maximum load resistance: 350 Ω Analog output range can be changed as desired.
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 70 g
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT-H22L Keyence

$498.77

Only 10 units left

Specifications

Model		GT-H22L
Type		Sensor head: Low-stress
Measuring range		22 mm 0.87"
Measuring force	Downward mounting	0.35N^*1
	Side mounting	0.3 N^*1
	Upward mounting	0.25N^*1
Mechanical response		5 Hz (at ambient temperature of 23 °C 73 °F)
Repeatability		8 µm 0.00031" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 Stainless steel, Indicator: Polyarylate, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 135 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range with the response time set to 100 ms.

Keyence GT2-CHP10M Keyence

$313.31

In stock, 11 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GT2-H12KF Keyence

$945.00

Only 6 units left

Specifications

Model		GT2-H12KF
Detection system		Scale Shot System, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*1
Measuring force	Downward mounting	1.0 N^*2
	Side mounting	0.9 N^*2
	Upward mounting	0.8 N^*2
Sampling cycle		1 ms
Mechanical response		10 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67 (IEC)
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: die-cast zinc, Indicator: polyarylate (PAR)
	Dust boot	NBR
	Contact	SUS304, cemented tungsten carbide^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 100 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT-A22L Keyence

$691.77

Only 5 units left

Specifications

Model		GT-A22L
Type		Sensor head: Low-stress Air push models
Measuring range		22 mm 0.87"
Measuring force	Downward mounting	0.35N^*1
	Side mounting	0.3 N^*1
	Upward mounting	0.25N^*1
Repeatability		8 µm 0.00031" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	-
	Pressure resistance	1.0 MPa
	Applied pressure range	0.35 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 stainless steel, Cylinder: Aluminum alloy, Plastic section of air joint: Polyacetal, Metal section of air joint: Nickel-plated brass, Indicator: Polyarylate, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 180 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range at ambient temperature of 23 °C 73 °F with the response time set to 100 ms.

Keyence GT2-CH2M Keyence

$159.62

Only 9 units left

Specifications

Model				GT2-CH2M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 straight - e-con
Length				2 m 6.56'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 80 g

Keyence GT2-H32 Keyence

$764.15

In stock, 20 units

Specifications

Model		GT2-H32
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		32 mm 1.26"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		3 µm 0.12 Mil (p-p)^*1
Measuring force	Downward mounting	2.1 N^*2
	Side mounting	1.8 N^*2
	Upward mounting	1.5 N^*2
Sampling cycle		1 ms
Mechanical response		6 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Materials	Main body	Main body cast: Zinc die-casting, Indicator: Polyarylate, Dust boot: NBR
	Dust boot	NBR
	Contact	TYPE304, 440C Stainless steel^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 270 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT2-PA12KL Keyence

$860.66

In stock, 12 units

Specifications

Model		GT2-PA12KL
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 µm 0.004 Mil
Indicated accuracy		1 µm0.04 Mil(P-P)^*1
Measuring force	Downward mounting	0.4 N^*2
	Side mounting	0.35 N^*2
	Upward mounting	0.3 N^*2
Sampling cycle		4 ms
Fluid used		Clean dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Pressure resistance	0.5 MPa
	Applied pressure range	0.05 MPa to 0.07 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Contact	SUS304, cemented tungsten carbide^*3
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (not including cable)^*4
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12KL/PA12L with a pressure of 0.06 MPa. The measuring force varies depending on the air pressure used. For details, see table 1.No dust boots are used with the GT2-PA12KL/PA12L. ^3 Contacts are available as options sold separately. ^4 Including the relay connector.

Keyence GT2-H12KL Keyence

$595.28

Only 6 units left

Specifications

Model		GT2-H12KL
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*1
Measuring force	Downward mounting	0.4 N^*2
	Side mounting	0.3 N^*2
	Upward mounting	0.2 N^*2
Sampling cycle		1 ms
Mechanical response		4 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body cast: Zinc die-casting, Indicator: Polyarylate
	Dust boot	-
	Contact	TYPE304 Stainless steel, super-tough tungsten alloy^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 95 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT2-500 Keyence

$1,228.44

In stock, 12 units

Specifications

Model		GT2-500
Mounting method		DIN-rail mount^*1
Main unit/expansion unit		Main unit
Power supply voltage		20 to 30 VDC, including 10 % ripple (P-P) (GT2-550 power supplied from the main unit), Class 2
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Number of expandable units		Maximum of 3 units including the main unit (Maximum of 15 sensor heads)^*2
Rating	Power consumption	4,800 mW, 160.0 mA or less at 30 V
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Materials	Main body	Main body case: polycarbonate, Cable: PVC
Weight		Approx. 140 g
^1 When connecting the DL Series and expansion units, always connect them when the amplifier units is connected to the DIN-rail and use the end unit (OP-26751 included with the DL Series). ^2 When using the DL-RB1A (for communication), ensure that the output cuurents is 10 mA or less.