Communication Gateways

$3,301.46

Only 5 units left

Buy the ProSoft Technology MVI94-MCM Communication Module - an industrial network interface providing controller-to-device connectivity. Supports standard industrial protocols for seamless automation integration. The ProSoft Technology MVI94-MCM is a direct replacement for existing communication installations.

Prosoft MVI56-MBP Prosoft

$4,970.00

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft MVI46-GSC Prosoft

$1,747.25

Only 6 units left

The Generic Serial ASCII Network Interface Module is a fast and easy way to add two fully configurable ASCII communication ports to the SLC platform without consuming the front port of the processor. This allows the SLC processor to interface with any generic ASCII device such as bar code scanners, weigh scale interfaces, legacy ASCII protocol connections, terminal port emulation and printer drivers. Each port supports the sending and receiving of large ASCII character strings and is individually configurable.

Prosoft C19M10-30-005 Prosoft

$0.00

Sold Out

ProSoft Technology supplies cables that provide the lowest attenuation and are pre-cut and assembled with connectors at the factory to ensure ultimate reliability and customer satisfaction. LMR 195 Cables are ideal for jumper assemblies in wireless communication systems and short antenna feed runs.

Prosoft MVI56E-MNETR Prosoft

$6,510.00

Only 3 units left

The Modbus TCP/IP Client/Server Enhanced Communication Module with Reduced Data Block allows Rockwell Automation ControlLogix processors to interface easily with Modbus TCP/IP-compatible devices, such as Modicon Programmable Automation Controllers (PACs) and a wide variety of Modbus TCP/IP-compatible instruments and devices. The MVI56E-MNETR uses a reduced Input/Output (I/O) data image block size for transferring data between itself and a ControlLogix processor. This makes it ideal for remote rack applications using ControlNet or EtherNet/IP process networks. The module also works well for applications that require redundant ControlLogix processors. MVI56E-MNETR enhancements include local and remote configuration and diagnostics through the module's Ethernet port, CIPconnect technology for bridging though Rockwell Automation ControlNet and EtherNetIP networks, and an on-board web server for access to module documentation and sample program files.

Red Lion NTPS-24-1 Red Lion

$0.00

Sold Out

Buy the Red Lion Controls NTPS-24-1 Power Supply - an industrial-grade power supply module providing regulated DC output for Red Lion Controls automation systems. Features overcurrent protection, high efficiency, wide input voltage range, and DIN-rail mounting. The Red Lion Controls NTPS-24-1 is a direct replacement for existing installations.

Red Lion C48TS013 Red Lion

$448.50

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Red Lion CR3000-10000-00420 Red Lion

$5,988.71

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Red Lion C48CD100 Red Lion

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Red Lion CR30000700000420 Red Lion

$5,660.12

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Red Lion C48CD107 Red Lion

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft 5204-MNET-PDPMV1 Prosoft

$0.00

Sold Out

The ProLinx Modbus TCP/IP to PROFIBUS DP Master Gateway creates a powerful connection between devices on a Modbus TCP/IP network and a PROFIBUS slave device. This stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and PROFIBUS DP Master configurable DB-9F port. The Modbus TCP/IP protocol driver can interface many different protocols into Schneider Electric Quantum processors as well other solutions supporting the protocol. The MNET driver supports Client and Server connections, and when coupled with the Web option provides a web/ftp interface as well. The PROFIBUS DP Master protocol driver supports complete Master specifications according to IEC 61158 on either a Mono-Master or Multi-Master network. The module supports the DPV1 specification.

Prosoft 3170-MBS Prosoft

$1,537.00

Only 2 units left

The MVI94 Modbus Slave Network Interface Adapter can interface up to 8 Rockwell Automation FLEX and/or Integra I/O modules directly with any Modbus Master.

Prosoft C19M10-80-005 Prosoft

$0.00

Sold Out

ProSoft Technology supplies cables that provide the lowest attenuation and are pre-cut and assembled with connectors at the factory to ensure ultimate reliability and customer satisfaction. LMR 195 Cables are ideal for jumper assemblies in wireless communication systems and short antenna feed runs.

Prosoft ILX34-MBS232 Prosoft

$0.00

Sold Out

ProSoft Technology’s ILX34-MBS232 module is ideal for point to point applications with a maximum distance of 50 feet away (15.2 meters) your processor. These include SCADA and field device interface applications. The module can be used in CompactLogix L1 processors or Distributed 1734 Point I/O systems. In addition, the module can be configured as a Master or Slave.

Prosoft MVI56-DNPSNET Prosoft

$3,878.09

Only 6 units left

The DNP 3.0 Ethernet Server Network Interface Module allows ControlLogix processors to interface with the many field devices that support the DNP protocol over Ethernet. DNP (Distributed Network Protocol) is an open communication protocol developed to achieve interoperability among systems specifically in the electric utility, oil & gas and water/wastewater industries. This non-proprietary protocol, available worldwide, was designed to optimize the transmission of data acquisition information and control commands. It is a highly efficient and reliable communications protocol between substation computers, RTUs, IEDs and master stations. DNP is also a layered protocol, featuring time stamping and True Report by Exception (TRBE). These features allow the MVI56-DNPSNET module to send a report to the processor without being polled, providing real time data transmission in critical situations.

Prosoft MVI69-N2 Prosoft

$559.98

Only 4 units left

Buy the ProSoft Technology MVI69-N2 - a genuine ProSoft Technology industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The ProSoft Technology MVI69-N2 is a direct drop-in replacement for existing installations and ships ready for integration.

Prosoft RLX2-IHNF-E Prosoft

$0.00

Sold Out

The ProSoft Technology Fast Industrial Hotspot (RLX2-IHNF) provides secure wireless solutions for plant-floor, SCADA automation, process control systems and mobile worker Wi-Fi infrastructure. It operates in the 2.4 or 5 GHz bands, including DFS channels, and is good for applications up to 2 mi. / 3.2 km.The Hotspot supports Access Point, Repeater, and Client modes. 802.11n technology delivers fast data rates up to 300 Mbps. This provides excellent packet-per-second performance and robust communications in rugged industrial environments. The 802.11n MIMO & Channel bonding supports demanding wireless applications such as Ethernet I/O and high-resolution video.The included IH Browser configuration and monitoring software allows the user to view network topology, assign IP addresses, monitor network diagnostics, and update radio firmware. The optional OPC Diagnostic Server is ideal for managing long-range wireless SCADA networks.

Prosoft 3100-LTQ Prosoft

$4,133.17

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft PLX32-EIP-MBTCP-UA Prosoft

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft MVI71-DNP Prosoft

$0.00

Sold Out

The MVI71 DNP 3.0 Master/Slave Communication Module is a single slot, backplane compatible DNP 3.0 interface solution for the PLC platform. This module provides highly configurable support of both DNP 3.0 Master and Slave implementations (level 2 minimum), allowing the many SCADA and field devices supporting the DNP protocol to be integrated into the powerful PLC platform.

Prosoft MVI71-GSC Prosoft

$10,924.74

Only 4 units left

The Generic Serial ASCII Network Interface Module is a fast and easy way to add two fully configurable ASCII communication ports to the PLC platform without consuming the front port of the processor. This allows the PLC processor to interface with any generic ASCII device such as bar code scanners, weigh scale interfaces, legacy ASCII protocol connections, terminal port emulation and printer drivers. Each port supports the sending and receiving of large ASCII character strings and is individually configurable.

Prosoft MVI71-HART Prosoft

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft MVI46-GEC Prosoft

$2,463.74

Only 3 units left

The Generic ASCII Ethernet Network Interface Module (MVI46-GEC) allows SLC processors to connect to any generic ASCII device such as bar code scanners, weigh scale interfaces, legacy ASCII protocol connections, terminal port emulation and printer drivers. The use of the TCP/IP protocol at the device level on the plant floor has become widespread. The MVI46-GEC takes advantage of Ethernet’s speed while also allowing greater distances between networked devices.