Circuit Breakers

iQuick PRD40r modular surge arrester - 1 pole + N - 350V - with remote transfer

DIN rail mounting base - 22 mm units - for control and signalling unit

Acti9 iC40N - miniature circuit-breaker - 3P+N - 32A - B Curve - 6000A/10kA

add-on residual current devices, Acti9 Vigi iCG40, 1P+N, 40 A, 300 mA, AC type

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

This Acti9 C60H-DC is a low voltage direct current miniature circuit breaker (MCB). It has 1P, rated current 32A and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 220VDC conforming to EN 60947-2 standard and 10kA at 220VDC conforming to EN 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. This miniature circuit breaker protects circuit against short circuit and overload current. It offers VisiTrip for safety during maintenance and VisiSafe to reduce intervention time. The Acti9 C60H-DC is used in direct current circuit (industrial control and automation, transport, renewable energy). This device is dedicated to industrial control, automations, transport and renewable energy applications. It has an electrical endurance going up to 3000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 250VDC. The Ui rated insulation voltage is 500VDC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Its width is 2 pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The product colour is white (RAL9003). The weight is 0.128kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is -25°C to 70°C. The storage temperature is -40°C to 85°C.

Main

Complementary

Acti9 iC60 RCBO - 2P - 10 A - C Curve - 10000A/15kA - 300 mA - AC type

Vigi C120 - earth leakage add-on block - 4P - 30 mA - class AC

Acti9 iC40N - miniature circuit-breaker - 1P+N - 25A - C Curve - 6000A/10kA

Acti9 iC60 RCBO - 4P - 16 A - B Curve - 6000A/6kA - 30 mA - SI type

Acti 9 iID - RCCB - 4P - 40A - 300mA s - type A-SI

Acti 9 iID - RCCB - 2P - 40A - 100mA - type AC

Reflex iC60N Ti24 16 A 3P curve C integrated control MCB

Acti9 iC60 RCBO - 4P - 32 A - C Curve - 6000A/6kA - 30 mA - SI type

extension iETL iTL 16 - 2P - 1C/O + 1NO - 16A - coil 12VDC - 24VAC 50/60Hz

MX Shunt Trip MX plus 1 OF 48-130Vac dc

Acti9 iC60 RCBO - 4P - 32 A - B Curve - 6000A/6kA - 30 mA - SI type

This Acti9 Reflex iC60N is a low voltage integrated control circuit breaker. It is a 3P circuit breaker with 3 protected poles, 25A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. Its width is 11 modules of 9mm. As circuit breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 220VAC to 240VAC, and 10kA at 380VAC to 415VAC. As circui-breaker, it protects circuits against short circuit and overload currents, disconnection in the industrial sector. It can control a device remotely by latched and/or impulse-type order according to the 3 operating modes to be chosen by the user. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. Resetting after a fault is performed manually by the resetting handle. The Ti24 interface allows direct interfacing of the Reflex iC60 with a PLC. It allows to execute remote control, to indicate the state of the control circuit and circuit breaker state information, to connect it to the Acti9 Smartlink thanks to the prefabricated cables.

Main

Complementary

Acti9 iC60 RCBO - 4P - 10 A - C Curve - 6000A/6kA - 30 mA - A type