1 year warranty
This XPSMP safety contoller can handle 2 independent safety functions. This safety controller with pre-defined functions meets the requirements of PL e/Category 4 conforming EN ISO 13849-1 and SILCL 3 conforming to EN/IEC 61508 and EN/IEC 62061. It enables two independent safety functions (selected from a choice of 15 pre-defined configurations) to be performed using the same product. It complies with the most stringent functional safety requirements thanks to multiple configurable safety functions. It has additional solid-state output for communication with PLCs about safety status of your process.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Preventa Safety automation |
| Product or Component Type | Safety controller with pre-defined function |
| Safety module name | XPSMP |
| Safety module application | 2 independent functions |
| Safety use category | Category 4 maximum EN/IEC 60954-1 |
| Type of start | Automatic or unmonitored 1) Automatic or unmonitored 10) Automatic or unmonitored 11) Automatic or unmonitored 14) Automatic or unmonitored 3) Automatic or unmonitored 5) Automatic or unmonitored 7) Monitored 12) Monitored 13) Monitored 15) Monitored 2) Monitored 4) Monitored 6) Monitored 8) Monitored 9) |
| Checks | Configuration 10) Configuration 13) Configuration 3) Configuration 4) Configuration 5) Configuration 6) Configuration 9) |
| Standards | EN/IEC 60947-1 + A11 EN/IEC 60947-5-1 EN/IEC 60204-1 DIN V VDE 801 + A1 |
| Product Certifications | UL CSA BIA |
| [Us] Rated Supply Voltage | 24 V DC - 20...20 % |
| Connections - terminals | Captive screw clamp terminals flexible 0.14...0.75 mm² without cable end, 2 wires Captive screw clamp terminals solid 0.14...0.75 mm² without cable end, 2 wires Captive screw clamp terminals flexible 0.14...2.5 mm² without cable end, 1 wire Captive screw clamp terminals solid 0.14...2.5 mm² without cable end, 1 wire Captive screw clamp terminals flexible 0.25...1 mm² with cable end, without bezel, 2 wires Captive screw clamp terminals flexible 0.25...1.5 mm² with cable end, with bezel, 1 wire Captive screw clamp terminals flexible 0.25...2.5 mm² with cable end, without bezel, 1 wire Captive screw clamp terminals flexible 0.5...1.5 mm² with cable end, with double bezel, 2 wires |
| Safety level | Can reach PL e/category 4 EN/ISO 13849-1 Can reach SIL 3 EN/IEC 62061 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Function of module | 0 functions disabled (factory setting) 1 emergency stop monitoring 1-channel wiring, category 2 10 enabling grip switch monitoring (3-position switch), category 4 11 sensing mat and edges monitoring, category 3 12 sensing mat and edges monitoring, category 3 13 relay output safety light curtain monitoring, category 4 14 coded magnetic switch monitoring, category 4 15 coded magnetic switch monitoring, category 4 2 emergency stop monitoring 1-channel wiring, category 2 3 emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 4 emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 5 emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 6 emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 7 emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 8 emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 9 guard monitoring for injection presses and blowing machines, category 4 |
| Synchronisation time between inputs | 0.5 s 13) 1.5 s 14) 1.5 s 15) 1.5 s 5) 1.5 s 6) 1.5 s 9) Unlimited 3) Unlimited 4) Unlimited 7) Unlimited 8) |
| Power Consumption in W | 5 W |
| Input protection type | Internal, electronic |
| [Uc] control circuit voltage | 24 V |
| Maximum line resistance | 100 Ohm <6561.7 ft (2000 m) |
| Number of safety circuits | 3 NO relays per function (6 NO total), volt-free |
| Number of additional circuits | 3 solid state outputs |
| Breaking capacity | 180 VA holding AC-15 C300 relay output 1800 VA inrush AC-15 C300 relay output |
| Breaking capacity | 20 mA 24 V static output circuit 1.5 A 24 V DC-13)50 ms relay output |
| Output thermal current | 2 A for 1 output and 4 A for the other 2 outputs relay 3.3 A for all 3 outputs relay simultaneously 6 A for 1 output and 2 A for the other 2 outputs relay |
| [Ith] conventional free air thermal current | 20 A |
| Associated fuse rating | 4 A gG relay output EN/IEC 60947-5-1, DIN VDE 0660 part 200 6 A fast blow relay output EN/IEC 60947-5-1, DIN VDE 0660 part 200 |
| Minimum output current | 10 mA relay output |
| Minimum output voltage | 17 V relay output |
| Maximum response time on input open | 30 ms |
| [Ui] rated insulation voltage | 300 V 2)EN/IEC 60947-5-1, DIN VDE 0110 parts 1 & 2 |
| [Uimp] rated impulse withstand voltage | 4 kV III EN/IEC 60947-5-1, DIN VDE 0110 parts 1 & 2 |
| Local signalling | 12 LEDs |
| Mounting Support | 35 mm symmetrical DIN rail |
| Depth | 4.5 in (114 mm) |
| Height | 3.9 in (99 mm) |
| Width | 1.8 in (45 mm) |
| Product Weight | 0.71 lb(US) (0.32 kg) |
three-phase 230V frequency inverter. PLd 11 kW, ILd 46,2 A, PHd 7,5 kW, IHd 30,8 A. Frame size R3
Inline, Block IO, INTERBUS, Inline shield connector, Digital inputs: 16, 24 V DC, connection method: 3-wire, Digital outputs: 16, 24 V DC, 500 mA, connection method: 3-wire, degree of protection: IP20, including Inline connector
| Product | |
| Article Number (Market Facing Number) | 3TK28271AB20 | 3TK28271AB20 |
| Product Description | SIRIUS safety relay with relay enabling circuits (EC) 24 V AC, 45 mm overall width Screw terminal EC instantaneous: 2 NO EC delayed: 2NO, 0.5...30 s SC: 1NC monitored start Basic device Maximum achieved SIL: 3/2, PL: e/d |
| Product family | Not available |
| Product Lifecycle (PLM) | PM490:Start of final year of support |
| Additional Product Information | |
| EAN | 4011209385719 |
| UPC | 754554511313 |
| Commodity Code | 85364900 |
| LKZ_FDB/ CatalogID | CC-IC10 |
| Product Group | 5837 |
| Group Code | R711 |
| Country of origin | Germany |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 1.052 lb |
| Package size unit of measure | Inch |
| Packaging Quantity | 1 |
| Product | |
| Article Number (Market Facing Number) | 3TC48170AG4 | 3TC48170AG4 |
| Product Description | contactor, frame size 4, 2-pole, DC-3 and 5, 75 A auxiliary switch 22 (2 NO + 2 NC) 125 V DC DC operation |
| Product family | 3TC contactors for switching DC voltage, 1-pole and 2-pole |
| Product Lifecycle (PLM) | PM300:Active Product |
| Additional Product Information | |
| EAN | 4011209086579 |
| UPC | 754554185149 |
| Commodity Code | 85364900 |
| LKZ_FDB/ CatalogID | CC-IC10 |
| Product Group | 5807 |
| Group Code | R711 |
| Country of origin | Germany |
| SCIP number | bec96e0f-1e22-422f-884d-9931f408db9f |
| Delivery information | |
| Net Weight (lb) | 9.744 lb |
| Package size unit of measure | in |
| Packaging Quantity | 1 |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Discrete output module |
| Discrete output number | 16 |
| Discrete output type | Relay |
| I/O connection | Removable screw terminal block |
| Number of common point | 2 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Discrete output function | 16 NO |
| Current per channel | 2 A |
| Maximum current per output common | 8 A |
| Contact resistance | 40000 µOhm |
| Response time | <= 7 ms |
| Insulation between channel and internal logic | 1500 Vrms for 1 minute |
| Current consumption | 45 mA at 5 V DC at state 1 for all inputs/outputs 5 mA at 5 V DC at state 0 for all inputs/outputs 75 mA at 24 V DC at state 1 for all inputs/outputs |
| Marking | CE |
| Terminals description PLC n°1 | (8)OUT_DIS#8 (3)OUT_DIS#3 (12)OUT_DIS#12 (13)OUT_DIS#13 COM0_POS COM0_POS#0-7 (11)OUT_DIS#11 (4)OUT_DIS#4 (14)OUT_DIS#14 (10)OUT_DIS#10 (0)OUT_DIS#0 (9)OUT_DIS#9 (2)OUT_DIS#2 (15)OUT_DIS#15 (5)OUT_DIS#5 (1)OUT_DIS#1 ALT COM1 TB (6)OUT_DIS#6 (7)OUT_DIS#7 COM1_POS#8-15 |
| Terminals description PLC n°2 | (4)OUT_DIS#4 (10)OUT_DIS#10 (12)OUT_DIS#12 (1)OUT_DIS#1 ALT_1 (15)OUT_DIS#15 COM1_NEG#8-15 (11)OUT_DIS#11 (7)OUT_DIS#7 COM0 COM1 (3)OUT_DIS#3 (14)OUT_DIS#14 TB (8)OUT_DIS#8 (13)OUT_DIS#13 COM0_NEG#0-7 (2)OUT_DIS#2 (5)OUT_DIS#5 (0)OUT_DIS#0 (6)OUT_DIS#6 (9)OUT_DIS#9 |
| Product weight | 0.145 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Harmony XBTGT |
| Product or Component Type | Advanced touchscreen panel |
| Display Type | Backlit monochrome STN LCD |
| Display colour | 8 levels of grey Amber or red |
| Display Resolution | 320 x 240 pixels QVGA |
| Display size | 3.8 inch |
| Software Type | Configuration software |
| Software Designation | Vijeo Designer |
| Operating System | Harmony |
| Processor name | CPU RISC |
| Processor frequency | 200 MHz |
| Memory description | 512 KB SRAM back up of data lithium battery 32 MB flash EPROM application memory |
| Integrated connection type | removable screw terminal block power supply RJ45 Ethernet TCP/IP RJ45 COM1 serial link RS232C/RS485 <= 115.2 kbits/s USB type A master port (V1.1) Modicon M340 terminal port communication |
| Resistance to electrostatic discharge | 6 kV IEC 61000-4-2 level 3 |
| Cut-out dimensions | 118 (+ 1/- 0) x 92.5 (+ 1/- 0) mm |
Complementary
| Characteristic | Value(s) |
|---|---|
| Touch panel | Analogue |
| Backlight lifespan | 10000 hours red 50000 hours amber |
| Brightness | 16 levels |
| Contrast | 8 levels via touch panel |
| Character font | Chinese (simplified Chinese) Korean Taiwanese (traditional Chinese) Japanese (ANK, Kanji) ASCII |
| [Us] rated supply voltage | 24 V DC |
| Supply | External source |
| Supply voltage limits | 19.2â¦28.8 V |
| Inrush current | 60 A |
| Power Consumption in W | 13 W |
| Local signalling | 1 LED (green) for normal operation |
| Number of pages | Limited by internal memory capacity |
| Downloadable protocols | Telemecanique Modicon Modbus TCP Telemecanique Modicon Modbus Mitsubishi Melsec third party protocols Omron Sysmac third party protocols Rockwell Automation Allen-Bradley third party protocols Siemens Simatic third party protocols Telemecanique Modicon Uni-TE |
| Realtime clock | Built-in |
| Port Ethernet | 100BASE-TX |
| Product mounting | Flush mounting |
| Fixing Mode | By 4 screw clamps By 2 spring clips |
| Front material | PPT |
| Enclosure Material | PPT |
| Marking | CE |
| Width | 5.1 in (130 mm) |
| Height | 4.09 in (104 mm) |
| Depth | 1.6 in (40 mm) |
| Product Weight | 0.9 lb(US) (0.4 kg) |
ACS355, 2HP, 1-Phase, 200-240V (Input), IP20 Enclosure, Variable Frequency Drives
Schneider
ATV71HD15M3X Schneider Electric Altivar 71 Variable speed drive
Sale price
$3,151.63
Only 1 unit leftMain
| Characteristic | Value(s) |
|---|---|
| Range of Product | Altivar 71 |
| Product or Component Type | Variable speed drive |
| Product Specific Application | Complex, high-power machines |
| Component name | ATV71 |
| Motor power kW | 15 kW, 3 phase 200...240 V |
| Maximum Horse Power Rating | 20 hp, 3 phase 200...240 V |
| Maximum motor cable length | 164.04 ft (50 m) shielded cable 328.08 ft (100 m) unshielded cable |
| power supply voltage | 200...240 V - 15...10 % |
| Phase | 3 phase |
| Line current | 61.6 A 240 V 3 phase 15 kW / 20 hp 71.7 A 200 V 3 phase 15 kW / 20 hp |
| EMC filter | Without EMC filter |
| Assembly style | With heat sink |
| Apparent power | 25.6 kVA 240 V 3 phase 15 kW / 20 hp |
| Prospective line Isc | 22 kA 3 phase |
| Nominal output current | 66 A 4 kHz 230 V 3 phase 15 kW / 20 hp |
| Maximum transient current | 109 A 2 s 3 phase 15 kW / 20 hp 99 A 60 s 3 phase 15 kW / 20 hp |
| Output frequency | 0.1â¦599 Hz |
| Nominal switching frequency | 4 kHz |
| Switching frequency | 1...16 kHz adjustable 4...16 kHz with derating factor |
| Asynchronous motor control profile | Sensorless flux vector control (SFVC) (voltage or current vector) Flux vector control (FVC) with sensor (current vector) ENA (Energy adaptation) system for unbalanced loads Voltage/frequency ratio (2 or 5 points) |
| Type of polarization | No impedance Modbus |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product destination | Synchronous motors Asynchronous motors |
| power supply voltage limits | 170â¦264 V |
| power supply frequency | 50...60 Hz - 5...5 % |
| power supply frequency limits | 47.5...63 Hz |
| Speed range | 1â¦100 asynchronous motor in open-loop mode, without speed feedback 1â¦1000 asynchronous motor in closed-loop mode with encoder feedback 1â¦50 synchronous motor in open-loop mode, without speed feedback |
| Speed accuracy | +/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn +/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn |
| Torque accuracy | +/- 15 % in open-loop mode, without speed feedback +/- 5 % in closed-loop mode with encoder feedback |
| Transient overtorque | 170 % +/- 10 % 60 s every 10 minutes 220 % +/- 10 % 2 s |
| Braking torque | <= 150 % with braking or hoist resistor 30 % without braking resistor |
| Synchronous motor control profile | Vector control without speed feedback |
| Regulation loop | Adjustable PI regulator |
| Motor slip compensation | Suppressable Adjustable Not available in voltage/frequency ratio (2 or 5 points) Automatic whatever the load |
| diagnostic | 1 LED (red) for drive voltage |
| Output voltage | <= power supply voltage |
| Insulation | Electrical between power and control |
| type of cable for mounting in an enclosure | With a NEMA Type1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC With an IP21 or an IP31 kit 3 IEC cable 104 °F (40 °C), copper 70 °C / PVC Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR |
| Electrical connection | Terminal 2.5 mm², AWG 14 AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR) Terminal 35 mm², AWG 2 L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB) |
| Tightening torque | 5.3 lbf.in (0.6 N.m) AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR) 47.8 lbf.in (5.4 N.m), 47.7 lb.in L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB) |
| Supply | Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection Internal supply 24 V DC 21â¦27 V), <200 mA overload and short-circuit protection |
| Analogue input number | 2 |
| Analogue input type | AI1-/Al1+ bipolar differential voltage +/- 10 V DC 24 V max 11 bits + sign AI2 software-configurable current 0...20 mA 242 Ohm 11 bits AI2 software-configurable voltage 0...10 V DC 24 V max 30000 Ohm 11 bits |
| input sampling time | 2 ms +/- 0.5 ms AI1-/Al1+) - analog 2 ms +/- 0.5 ms Al2) - analog 2 ms +/- 0.5 ms LI1...LI5) - discrete 2 ms +/- 0.5 ms LI6)if configured as logic input - discrete |
| Response time | <= 100 ms in STO (Safe Torque Off) AO1 2 ms +/- 0.5 ms analog R1A, R1B, R1C 7 ms +/- 0.5 ms discrete R2A, R2B 7 ms +/- 0.5 ms discrete |
| absolute accuracy precision | +/- 0.6 % AI1-/Al1+) for a temperature variation 60 °C +/- 0.6 % AI2) for a temperature variation 60 °C +/- 1 % AO1) for a temperature variation 60 °C |
| Linearity error | +/- 0.15 % of maximum value AI1-/Al1+, AI2) +/- 0.2 % AO1) |
| Analogue output number | 1 |
| Analogue output type | AO1 software-configurable logic output 10 V 20 mA AO1 software-configurable current 0...20 mA 500 Ohm 10 bits AO1 software-configurable voltage 0...10 V DC 470 Ohm 10 bits |
| Discrete output number | 2 |
| Discrete output type | Configurable relay logic R1A, R1B, R1C) NO/NC - 100000 cycles Configurable relay logic R2A, R2B) NO - 100000 cycles |
| Minimum switching current | 3 mA 24 V DC configurable relay logic |
| Maximum switching current | R1, R2 2 A 250 V AC inductive, cos phi = 0.4 R1, R2 2 A 30 V DC inductive, cos phi = 0.4 R1, R2 5 A 250 V AC resistive, cos phi = 1 R1, R2 5 A 30 V DC resistive, cos phi = 1 |
| Discrete input number | 7 |
| Discrete input type | LI1...LI5 programmable 24 V DC level 1 PLC 3500 Ohm LI6 switch-configurable 24 V DC level 1 PLC 3500 Ohm LI6 switch-configurable PTC probe 0â¦6 1500 Ohm PWR safety input 24 V DC 1500 Ohm ISO 13849-1 level d |
| Discrete input logic | Negative logic (sink) LI1...LI5), > 16 V, < 10 V Positive logic (source) LI1...LI5), < 5 V, > 11 V Negative logic (sink) LI6)if configured as logic input, > 16 V, < 10 V Positive logic (source) LI6)if configured as logic input, < 5 V, > 11 V |
| Acceleration and deceleration ramps | S, U or customized Linear adjustable separately from 0.01 to 9000 s Automatic adaptation of ramp if braking capacity exceeded, by using resistor |
| Braking to standstill | By DC injection |
| Protection type | Against exceeding limit speed drive Against input phase loss drive Break on the control circuit drive Input phase breaks drive Line supply overvoltage drive Line supply undervoltage drive Overcurrent between output phases and earth drive Overheating protection drive Overvoltages on the DC bus drive Short-circuit between motor phases drive Thermal protection drive Motor phase break motor Power removal motor Thermal protection motor |
| Insulation resistance | > 1 mOhm 500 V DC for 1 minute to earth |
| Frequency resolution | Analog input 0.024/50 Hz Display unit 0.1 Hz |
| Communication Port Protocol | Modbus CANopen |
| Connector type | 1 RJ45 on front face)Modbus 1 RJ45 on terminal)Modbus Male SUB-D 9 on RJ45CANopen |
| Physical interface | 2-wire RS 485 Modbus |
| Transmission frame | RTU Modbus |
| Transmission rate | 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps Modbus on terminal 9600 bps, 19200 bps Modbus on front face 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps CANopen |
| Data format | 8 bits, 1 stop, even parity Modbus on front face 8 bits, odd even or no configurable parity Modbus on terminal |
| Number of addresses | 1â¦127 CANopen 1â¦247 Modbus |
| Method of access | Slave CANopen |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 15.7 in (400 mm) |
| Depth | 8.4 in (213 mm) |
| Width | 9.06 in (230 mm) |
| Product Weight | 48.5 lb(US) (22 kg) |
| Option card | Communication card CC-Link Controller inside programmable card Communication card DeviceNet Communication card EtherNet/IP Communication card Fipio I/O extension card Communication card Interbus-S Interface card for encoder Communication card Modbus Plus Communication card Modbus TCP Communication card Modbus/Uni-Telway Overhead crane card Communication card Profibus DP Communication card Profibus DP V1 |
Soft Starter for Asynchronous Motor - Altistart ATS48 - 40 A - 208..690 V - 11..37kW
Controllers BOARD COMMS CPU 2 PORT RS232C
ETHERNET UNIT, 10BASE-T, 100M MAX DISTANCE, UTP CABLE
Main
| Characteristic | Value(s) |
|---|---|
| Range compatibility | Lexium 23 Plus |
| Device short name | BCH |
| Product or component type | Servo motor |
Complementary
| Characteristic | Value(s) |
|---|---|
| Maximum mechanical speed | 5000 rpm |
| [Us] rated supply voltage | 220 V |
| Network number of phases | Single phase |
| Continuous stall current | 7.3 A |
| Continuous power | 1 kW |
| Shaft end | Keyed |
| Second shaft | Without second shaft end |
| Shaft diameter | 22 mm |
| Shaft length | 37 mm |
| key width | 8 mm |
| Feedback type | 20 bits incremental encoder |
| Holding brake | Without |
| Mounting support | Asian standard flange |
| Motor flange size | 100 mm |
| Torque constant | 0.43 N.m/A |
| Back emf constant | 16.8 V/krpm at 20 °C |
| Rotor inertia | 2.65 kg.cm² |
| Stator resistance | 0.4 Ohm at 20 °C |
| Stator inductance | 3.62 mH at 20 °C |
| Stator electrical time constant | 9.3 ms at 20 °C |
| Maximum radial force Fr | 490 N |
| Maximum axial force Fa | 98 N |
| Brake pull-in power | 19.4 W |
| type of cooling | Natural convection |
| Length | 153.5 mm |
| Number of motor stacks | 1 |
| Centring collar diameter | 95 mm |
| centring collar depth | 5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 9 mm |
| Circle diameter of the mounting holes | 115 mm |
| Distance shaft shoulder-flange | 37 mm |
| Product weight | 4.3 kg |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Harmony iPC |
| Device short name | Modular BOX PC Optimized |
| Product or Component Type | Modular box PC |
| Range Compatibility | IDisplay Modular Display HMIDM |
| Accessory / separate part destination | PC panel HMIDM modular display |
| Software package | Node-RED and system nodes restore IIoT Wiring Operating System Restore McAfee white listing installer cyber security license not included EcoStruxture secure connect advisor annual subscription cyber security license not included EcoStruxure Operator Terminal Expert run time HMI license not included EcoStruxure machine SCADA expert run time HMI/SCADA on configured offer only EcoStruxure augmented operator advisor server augmented operator license not included |
Complementary
| Characteristic | Value(s) |
|---|---|
| Mounting Location | Book mounting Flat mounting Wall mounting |
| Memory description | 4 GB RAM DDR3 internal not expandable) |
| Free slots | 1 M.2 SSD |
| Number of slots available for expansion | 1.0 mini PCIe |
| Display resolution | 3200 x 2000 pixels at 60 Hz |
| Watchdog timer | 1â¦255 ms |
| Electrical connection | Screw connector, connector type: pin, 1 way, circuit application: ground - location: bottom Connector, connector type: SMA, 3 ways - location: top |
| Cyber secured boot | Secure password boot UEFI |
| [Us] rated supply voltage | 24 V DC power supply 100...240 V AC power supply |
| Supply voltage limits | 9.6â¦28.8 V |
| Control type | ON/OFF button |
| Main type | Optimised |
| Number of slots | 1 slot(s) for mini PCI Express full-size without optional interface plate, |
| Type of cooling | Fanless |
| Inrush current | 2.03 A |
| Width | 7.4 in (187 mm) |
| Height | 5.9 in (150 mm) |
| Product Weight | 2.76 lb(US) (1.25 kg) |
| Product | |
| Article Number (Market Facing Number) | 6FX80022DC201AE0 | 6FX80022DC201AE0 |
| Product Description | Signal cable pre-assembled type: 6FX8002-2DC20 DRIVE-CLiQ with 24 V plug RJ45 IP67 on both sides released only up to 75 m length Dmax=7.1 mm length (m)= +0 +0 +4 +0 |
| Product family | Ordering Data Overview |
| Product Lifecycle (PLM) | PM300:Active Product |
| Additional Product Information | |
| EAN | Not available |
| UPC | 662643414363 |
| Commodity Code | 85444290 |
| LKZ_FDB/ CatalogID | NCZ-M |
| Product Group | 9300 |
| Group Code | R220 |
| Country of origin | Slovakia |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 0.692 lb |
| Package size unit of measure | Not available |
| Packaging Quantity | 1 |
Phoenix Contact
2903806 Phoenix Contact - SMS relay - TC MOBILE I/O X200 AC
Sale price
$449.93
Only 1 unit leftSuccessor to the SMS relay: monitor digital values via the mobile communication network and switch relay outputs remotely. Communication is via SMS or GPRS (e-mail). Supply voltage range of 93�V ... 250�V�AC.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.