Buy Best selling products Industrial Automation Parts

$2,253.37

Only 5 units left

Specifications

Model		LK-G5001V^1^2
Separate type		LK-G5001/LK-HD500
Type		Main controller
Sensor head compatibility		Compatible
No. of connectable sensor heads		2
Display	Minimum display unit	LK-HD500: 0.001 µm
	Display range	LK-HD500: ±999.999 µm to ±9,999.99 mm (7 settings selectable)
	Display cycle	LK-HD500: Approx. 10 times/sec.
Display interface	Display port	Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected
	LED indicator	LASER ON
Terminal block	Analog output voltage	±10 V output, Output impedance: 100 Ω
	Analog current output	4 to 20 mA, Maximum load resistance: 350 Ω
	No. of analog outputs	2
	TIMING 1 input	Non-voltage input^*3
	RESET 1 input
	Auto-zero 1 input
	Laser control input	Non-voltage input^*4
	Laser remote input	Non-voltage input
	Alarm output	NPN open-collector output
	General comparator output
Expansion connector	TIMING input	Non-voltage input
	RESET input
	Auto-zero input
	Program switching input
	Binary selection input
	Alarm output	NPN open-collector output
	Comparator output
	Binary output
RS-232C interface		Baud rate: 9,600 to 115,200 bps Data length: 8 bits, Stop bit length: 1 bit, Parity: None/even/odd
USB interface		USB 2.0 Hi-Speed compliant^*5
Ethernet interface		100Base-TX/10Base-T^*6
EtherNet/IP™interface		Cyclic communication (implicit messaging) Message communication (explicit messaging) : UCMM and Class3 Number of connections: 32 Complies with conformance test version CT14^*7
PLC-Link		The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series EtherNet/IP™, CC-Link, and DeviceNet® cannot be used in conjunction with PLC-Link
Head expansion unit connector		Up to 10 head expansion units can be connected to one main controller
Expansion unit connector		Either of the CC-Link unit (LK-CC100) or DeviceNet® unit (LK-DN100) can be connected
Power supply	Power supply voltage	24 VDC ±10 %
	Maximum current consumption	0.6 A or less with 1 head/3.5 A or less with 12 heads
Environmental resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to +50 °C 32 to 122 °F. When two or more head expansion units are connected: 0 to +40 °C 32 to 104 °F.
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 600 g
^1 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. ^2 Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring" in the User's Manual. ^3 This input is applied to all of the synchronized OUT. ^4 When the laser class 3B sensor head is connected, a key-operated switch must be used for the input to this terminal. The laser is emitted only when the key-operated switch is set to the ON position. (Select a key which can be removed only when it is set to the OFF position.) When the laser class 2/3R sensor head is connected, the laser turns on when this terminal is opened and turns off when it is short-circuited. ^5 When a PC supporting USB 1.1 or USB 2.0 full speed is connected, the data refresh cycle and other operations may slow down. ^6 Use the Ethernet interface only for direct connections with a PC or for local network connections with a PC or LK-G5000 Series units. ^*7 The EtherNet/IP™ interface cannot be used when a CC-Link unit or a DeviceNet® unit is installed. EtherNet/IP™ is supported by the latest controllers. For details on which controllers support EtherNet/IP™ , contact your nearest KEYENCE office.

Keyence LK-G5001 Keyence

$1,872.36

Only 8 units left

Specifications

Model		LK-G5001
Type		Separate type Main controller
Sensor head compatibility		Compatible
No. of connectable sensor heads		2
Display	Minimum display unit	0.001 µm
	Display range	±999.999 µm to ±9999.99 mm (7 settings selectable)
	Display cycle	Approx 10 times/sec.
Display interface	Display port	Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected
	LED indicator	LASER ON
Terminal block	Analog output voltage	±10 V output, Output impedance: 100 Ω^*1
	Analog current output	4 to 20 mA, Maximum load resistance: 350 Ω^*1
	No. of analog outputs	2^*1
	TIMING 1 input	Non-voltage input^*2
	RESET 1 input
	Auto-zero 1 input
	Laser remote input	Non-voltage input^*1
	Alarm output	NPN open-collector output^*1
	General comparator output
Expansion connector	TIMING input	Non-voltage input^*1
	RESET input
	Auto-zero input
	Program switching input
	Binary selection input
	Alarm output	NPN open-collector output^*1
	Comparator output
	Binary output
RS-232C interface		Baud rate: 9600 to 115200 bps Data length: 8 bits Stop bit length: 1 bit Parity: None/even/odd
USB interface		USB 2.0 Hi-Speed compliant^*3
Ethernet interface		100Base-TX/10Base-T^*4
EtherNet/IP™interface		Cyclic communication (implicit messaging) Message communication (explicit messaging) : UCMM and Class3 Number of connections: 32 Complies with conformance test version CT14^*5
PLC-Link		The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series EtherNet/IP™, CC-Link, and DeviceNet® cannot be used in conjunction with PLC-Link
Head expansion unit connector		Up to 10 head expansion units can be connected to one main controller
Expansion unit connector		Either of the CC-Link unit (LK-CC100) or DeviceNet® unit (LK-DN100) can be connected
Power supply	Power supply voltage	24 VDC ±10%
	Maximum current consumption	0.6 A or less with 1 head/3.5 A or less with 12 heads
Environmental resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to +50 °C 32 to 122 °F. When two or more head expansion units are connected: 0 to +40 °C 32 to 104 °F.
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 600 g
^1 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring" in the User's Manual. ^2 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring" in the User's Manual. This input is applied to all of the synchronized OUT. ^3 When a PC supporting USB 1.1 or USB 2.0 full speed is connected, the data refresh cycle and other operations may slow down. ^4 Use the Ethernet interface only for direct connections with a PC or for local network connections with a PC or LK-G5000 Series units. ^*5 The EtherNet/IP™ interface cannot be used when a CC-Link unit or a DeviceNet® unit is installed. EtherNet/IP™ is supported by the latest controllers. For details on which controllers support EtherNet/IP™ , contact your nearest KEYENCE office.

Schneider ATV610D90N4 Schneider

$3,253.87

In stock, 42 units

variable speed drive, Easy Altivar 610, 90kW, 125hp, 380...460V, IP20

Siemens 3RW4036-1BB04 Siemens

$752.67

In stock, 17 units

Product
Article Number (Market Facing Number)	3RW40361BB04 \| 3RW40361BB04
Product Description	SIRIUS soft starter S2 45 A, 22 kW/400 V, 40 °C 200-480 V AC, 24 V AC/DC Screw terminals
Product family	3RW40 soft starters
Product Lifecycle (PLM)	PM300:Active Product
Additional Product Information
EAN	4011209691827
UPC	754554958606
Commodity Code	85371098
LKZ_FDB/ CatalogID	CC-IC10
Product Group	3727
Group Code	R711
Country of origin	Czech Republic
SCIP number	Not available
Delivery information
Net Weight (lb)	2.853 lb
Package size unit of measure	in
Packaging Quantity	1

Siemens 3RW4027-1TB04 Siemens

$676.28

In stock, 18 units

Product
Article Number (Market Facing Number)	3RW40271TB04 \| 3RW40271TB04
Product Description	SIRIUS soft starter S0 32 A, 15 kW/400 V, 40 °C 200-480 V AC, 24 V AC/DC Screw terminals Thermistor motor protection
Product family	3RW40 soft starters
Product Lifecycle (PLM)	PM300:Active Product
Additional Product Information
EAN	4011209691711
UPC	040892655377
Commodity Code	85371098
LKZ_FDB/ CatalogID	CC-IC10
Product Group	3727
Group Code	R711
Country of origin	Czech Republic
SCIP number	Not available
Delivery information
Net Weight (lb)	1.565 lb
Package size unit of measure	Inch
Packaging Quantity	1

Keyence FS-V31CP Keyence

$246.18

In stock, 64 units

Specifications

Model		FS-V31CP
Type		1-output + 1-input with M8 connector
Output		PNP
Main unit/Expansion unit		Main unit
Control output		1 output
Monitor output (1 to 5 V)		N/A
External input		1 input
Connector		M8
Light source LED		Red, 4-element LED (Wavelength: 640 nm)
Response time		33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)
Output selection		LIGHT-ON/DARK-ON (switch-selectable)
Display indicator		Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P, Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Size		30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)
Detection mode		Light intensity (area detection possible, automatic sensitivity-tracking function provided)
Timer function		OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control output		PNP open-collector 24 V, 100 mA max.^*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
External inputy		Input time: 2 ms (ON)/20 ms (OFF) min.^*2
Unit expansion		Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.
Number of interference prevention units	Normal operation	HIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Power consumption	Normal: 750 mW max. (Using 24 V, 31 mA max., using 12 V, 40 mA max.)/ Power saving 580 mW max. (Using 24 V, 24 mA max., using 12 V, 28 mA max.)^*3
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Polycarbonate
Accessories		N/A
Weight		Approx. 80 g
^1 Total current of two outputs should be less than 100 mA. ^2 Only available on certain models. ^3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA). ^4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Keyence FS-N18N Keyence

$130.56

In stock, 43 units

Keyence FS-N18N Digital Fiber Optic Sensor, Fiber Amplifier

Omron E3Z-T86 Omron

$97.23

Only 6 units left

Through-beam type, PNP output, Sensing distance 15 m, M8 connector models

Yaskawa CIMR-JUBA0002BAA Yaskawa

$257.64

Only 5 units left

Yaskawa CIMR-JUBA0002BAA Variable Frequency Drive 240 Volt Single Phase Input 1/4 HP 1.9 Amp

Yaskawa CIMR-JU4A0007BAA Yaskawa

$379.23

Only 6 units left

Yaskawa CIMR-JU4A0007BAA Variable Frequency Drive 480 Volt Three Phase Input 4 HP 6.9 Amp

Yaskawa CIMR-JC4A0009BAA Yaskawa

$404.58

In stock, 15 units

Inverter Drive, 7.2A, Three Phase, 3kW

Yaskawa CIMR-JC4A0005BAA Yaskawa

$336.12

In stock, 21 units

Inverter Drive, 4.8A, Three Phase, 1.5kW

Yaskawa CIMR-AU4A0139AAA Yaskawa

$3,554.00

In stock, 26 units

A1000 series - AC Drive - 380Vac-480Vac - 139A/112A - 100HP - 3-phase input (3P)

Yaskawa CIMR-AU4A0088AAA Yaskawa

$2,857.11

Only 7 units left

A1000 series - AC Drive - 380Vac-480Vac - 88A/75A - 60HP - 3-phase input (3P)

Yaskawa CIMR-AU4A0058AAA Yaskawa

$1,790.45

Only 6 units left

A1000 series - AC Drive - 380Vac-480Vac - 44A/39A - 30HP - 3-phase input (3P)

Yaskawa CIMR-AU4A0044AAA Yaskawa

$1,520.86

Only 6 units left

A1000 series - AC Drive - 380Vac-480Vac - 44A/39A - 30HP - 3-phase input (3P)

Yaskawa CIMR-AU4A0038AAA Yaskawa

$1,179.30

Only 5 units left

A1000 series - AC Drive - 380Vac-480Vac - 38A/31A - 25HP - 3-phase input (3P)

Yaskawa CIMR-AU4A0018AAA Yaskawa

$791.94

Only 4 units left

A1000 series - AC Drive - 380Vac-480Vac - 17.5A/14.8A - 10HP - 3-phase input (3P)

Siemens 6SL3244-0BB12-1PA1 Siemens

$333.42

Only 10 units left

Product
Article Number (Market Facing Number)	6SL32440BB121PA1 \| 6SL32440BB121PA1
Product Description	SINAMICS G120 CONTROL UNIT CU240E-2 DP E-TYPE SAFETY INTEGRATED STO PROFIBUS DP 6DI, 3DO, 2AI, 2AO, MAX 1F-DI PTC/KTY INTERFACE USB- AND SD/MMC-INTERFACE PROTECTION IP20 AMBIENT TEMP 0 TO +50 DEG C WITHOUT POWER MODULE AND PANEL
Product family	Ordering Data Overview
Product Lifecycle (PLM)	PM300:Active Product
Additional Product Information
EAN	4042948661727
UPC	Not available
Commodity Code	85049090
LKZ_FDB/ CatalogID	D11.1SD
Product Group	9779
Group Code	R220
Country of origin	Great Britain
SCIP number	Not available
Delivery information
Net Weight (lb)	1.080 lb
Package size unit of measure	Inch
Packaging Quantity	1

Siemens 6SL3210-1PE18-0AL1 Siemens

$421.76

Only 9 units left

Product
Article Number (Market Facing Number)	6SL32101PE180AL1 \| 6SL32101PE180AL1
Product Description	SINAMICS g120 power module pm24 built in cl. a filter with buil braking chopper 3AC380-480v +10 47-63HZ output high overload 2, 200% 3s,150% 57s,100% 240s ambi -10 to +50 deg c output low ove for 150% 3s,110% 57s,100% 240s temp -10 to +40 deg c 196 x 73 (hxwxd), fsa protection IP20 wi control unit and panel approved firmware- version v4.6
Product family	Ordering Data Overview
Product Lifecycle (PLM)	PM300:Active Product
Additional Product Information
EAN	4042948666012
UPC	887621779993
Commodity Code	85044095
LKZ_FDB/ CatalogID	D11.1SD
Product Group	9772
Group Code	R220
Country of origin	Great Britain
SCIP number	Not available
Delivery information
Net Weight (lb)	3.307 lb
Package size unit of measure	Inch
Packaging Quantity	1

Siemens 6SL3210-1PE12-3AL1 Siemens

$296.67

Only 6 units left

Product
Article Number (Market Facing Number)	6SL32101PE123AL1 \| 6SL32101PE123AL1
Product Description	SINAMICS g120 power module pm24 built in cl. a filter with buil braking chopper 3AC380-480v +10 47-63HZ output high overload 0, 200% 3s,150% 57s,100% 240s ambi -10 to +50 deg c output low ove 0,75KW at 150% 3s,110% 57s,100% ambient temp. -10 to +40 deg c x 165 (hxwxd), fsa protection I without control unit and panel for firmware-version v4.6
Product family	Ordering Data Overview
Product Lifecycle (PLM)	PM300:Active Product
Additional Product Information
EAN	4042948665923
UPC	887621775452
Commodity Code	85044095
LKZ_FDB/ CatalogID	D11.1SD
Product Group	9772
Group Code	R220
Country of origin	Great Britain
SCIP number	Not available
Delivery information
Net Weight (lb)	3.417 lb
Package size unit of measure	Inch
Packaging Quantity	1

Siemens 6SL3210-1PB13-8AL0 Siemens

$328.76

In stock, 11 units

Product
Article Number (Market Facing Number)	6SL32101PB138AL0 \| 6SL32101PB138AL0
Product Description	SINAMICS Power Module PM240-2 with integrated Class A filter with integrated braking chopper 200-240 V 1/3AC+10/-10% 47-63Hz Power high overload: 0.55kW at 200% 3s, 150% 57s 100% 240 s; Ambient temperature -10 to +50 °C, power low overload: 0.75kW at 150% 3s, 110% 57s, 100% 240S Ambient temperature -10 to +40 °C 196x 73x 165 (HxWxD), FSA Degree of protection IP20 without Control Unit and operating unit Released as of CU firmware version V4.6
Product family	Ordering Data Overview
Product Lifecycle (PLM)	PM300:Active Product
Additional Product Information
EAN	4042948666319
UPC	887621829797
Commodity Code	85044095
LKZ_FDB/ CatalogID	D11.1SD
Product Group	9772
Group Code	R220
Country of origin	Great Britain
SCIP number	Not available
Delivery information
Net Weight (lb)	3.307 lb
Package size unit of measure	Inch
Packaging Quantity	1

Siemens 6SL3210-1PB13-0UL0 Siemens

$271.46

Only 9 units left

Product
Article Number (Market Facing Number)	6SL32101PB130UL0 \| 6SL32101PB130UL0
Product Description	SINAMICS Power Module PM240-2 unfiltered with integrated braking chopper 200-240 V 1/3AC+10/-10% 47-63Hz Power high overload: 0.37kW at 200% 3s, 150% 57s, 100% 240 s; Ambient temperature -10 to +50 °C, power low overload: 0.55kW at 150% 3s, 110% 57s, 100% 240S Ambient temperature -10 to +40 °C 196x 73x 165 (HxWxD), FSA Degree of protection IP20 without Control Unit and operating unit Released as of CU firmware version V4.6
Product family	Ordering Data Overview
Product Lifecycle (PLM)	PM300:Active Product
Additional Product Information
EAN	4042948666210
UPC	887621830731
Commodity Code	85044095
LKZ_FDB/ CatalogID	D11.1SD
Product Group	9772
Group Code	R220
Country of origin	Great Britain
SCIP number	Not available
Delivery information
Net Weight (lb)	3.086 lb
Package size unit of measure	Inch
Packaging Quantity	1

Siemens 6SL3210-1KE27-0AF1 Siemens

$2,279.40

Only 10 units left

Product
Article Number (Market Facing Number)	6SL32101KE270AF1 \| 6SL32101KE270AF1
Product Description	SINAMICS G120C rated power: 37.0 kW with 150% overload for 3 s. 380-480 V 3AC +10/-20% 47-63 Hz integrated filter class A I/O interface: 6 DI, 2 DO, 1 AI, 1 AO Safe Torque Off integrated fieldbus integrated: PROFINET-PN degree of protection IP20/UL open type size: FSD 472x 200x 237 (HxWxD) external 24 V
Product family	Ordering Data Overview
Product Lifecycle (PLM)	PM300:Active Product
Additional Product Information
EAN	4042948673225
UPC	804766375521
Commodity Code	85044095
LKZ_FDB/ CatalogID	D11.1SD
Product Group	5820
Group Code	R220
Country of origin	Germany
SCIP number	Not available
Delivery information
Net Weight (lb)	44.092 lb
Package size unit of measure	Inch
Packaging Quantity	1