1 year warranty
Digital Compact Servo Drive, 2-axis module, 100…480 V AC, rated output current 2 x 3 A, EtherCAT interface, OCT, hardware version 2.0, firmware version 2.06 (1)
EtherCAT P Box, 2-port EtherCAT P junction, with refresh
Potential supply terminal, any voltage up to 230 V AC
Bus Terminal, 4-channel analog output, current, 4…20 mA, 12 bit, single-ended
Bus Terminal, 8-channel analog input, current, 4…20 mA, 12 bit, single-ended
Bus Terminal, 2-channel triac output, 12...230 V AC, 1 A
Bus Terminal, 2-channel triac output, 12...230 V AC, 0.5 A
Bus Terminal, 2-channel relay output, 125 V AC, 30 V DC, 0.5 A AC, 2 A DC
EtherCAT Terminal, license key for TwinCAT 3.1
EtherCAT Terminal, 4-channel analog output, current, 4…20 mA, 12 bit
Bus Terminal, 2-channel analog input, temperature, thermocouple, 16 bit
EtherCAT Terminal, 1-channel analog input, measuring bridge, full bridge, 24 bit, high-precision
EtherCAT Terminal, 4-channel analog input, current, 0…20 mA, 12 bit, differential
EtherCAT Terminal, 2-channel analog input, voltage, ±10 V, 16 bit, differential
EtherCAT Terminal, 8-channel digital input, 24 V DC, TwinSAFE
EtherCAT Coupler
EtherCAT Box, 16-channel digital input, 24 V DC, 10 µs, D-sub
EtherCAT Box, 16-channel digital input, 24 V DC, 3 ms, M8
EtherCAT Box, 8-channel digital combi, 24 V DC, 3 ms, 0.5 A, M8
Infrastructure, 16-port switch, Ethernet, 100 Mbit/s, 24 V DC, RJ45
EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A
EtherCAT Terminal, 8-channel analog input, current, 0…20 mA, 12 bit, single-ended
EtherCAT Terminal, 2-channel analog output, current, 0…20 mA, 16 bit
EtherCAT Terminal, 2-channel analog input, current, 0…20 mA, 16 bit, single-ended
Beckhoff Automation develops PC-based control technology built around Industrial PCs, real-time Ethernet communication, and modular I/O terminals. Beckhoff PLC systems are used to implement controller architectures where logic execution, fieldbus communication, and I/O processing are handled within a PC-based runtime environment. PLC Direct supplies Beckhoff PLC hardware used for replacement and lifecycle support within Beckhoff automation systems.
Why Choose Beckhoff: Reliable and Innovative Automation Solutions
Beckhoff is defined by its PC-based control concept, where PLC functionality runs on Industrial PCs rather than dedicated controller hardware. Beckhoff PLCs are designed around modular I/O terminals and high-speed fieldbus communication, enabling control architectures to be assembled at the I/O and IPC level instead of through fixed PLC families.
This approach allows Beckhoff PLC systems to be built around:
- Industrial PC–based controllers executing automation logic
- Terminal-based I/O systems assembled per signal requirement
- High-speed EtherCAT communication architectures
- Controller configurations defined by software runtime and hardware selection
This design model reflects Beckhoff’s emphasis on software-defined control executed on standardized PC hardware.
Beckhoff Products and Solutions
Beckhoff structures its automation portfolio around Industrial PCs, embedded controllers, and modular I/O terminals used to construct distributed PC-based control systems. The Beckhoff collection at PLC Direct focuses on hardware used in installed Beckhoff automation environments, supporting maintenance and lifecycle continuity.
Beckhoff Product Families
Beckhoff product families commonly supported include:
- Industrial PCs (IPC) used as automation and motion control platforms
- Embedded controllers (CX2000, CX5000, CX7000, CX9000 series) used for compact PC-based control
- Beckhoff PLC modules including EtherCAT Terminals (ELxxxx series) used for high-speed I/O signal processing
- Bus Terminals (KLxxxx series) used for fieldbus-neutral I/O signal processing
- EtherCAT Box modules (EPxxxx series) used for IP67-rated distributed I/O
- EtherCAT Couplers (EKxxxx series) used for real-time communication
- TwinSAFE-enabled I/O terminals used for safety-rated applications
- AX5000 and AX8000 servo drives for motion control
Beckhoff Products Available on PLC Direct
Products available through PLC Direct’s Beckhoff collection include:
- PLC Beckhoff Industrial PC controllers
- Embedded Beckhoff PLC controllers (CX series)
- EtherCAT Terminals (ELxxxx series)
- Bus Terminals (KLxxxx series)
- EtherCAT Box modules (EPxxxx series)
- EtherCAT Couplers (EKxxxx series)
- TwinSAFE I/O modules and safety components
- Support accessories and system components
These products are typically sourced for repair, replacement, or lifecycle support of Beckhoff PLC systems.
Lifecycle Support for Beckhoff Systems
PLC Direct supports Beckhoff PLCs by supplying inventory-backed Beckhoff hardware used across multiple stages of the system lifecycle. Our focus is on supporting operational continuity within Beckhoff automation environments.
Support coverage includes:
- Beckhoff PLC controllers used in active systems
- Beckhoff PLC modules including EtherCAT Terminals and Bus Terminals used in configured architectures
- Select Beckhoff EtherCAT components and couplers, subject to availability
Additional support may include:
- Inventory-backed availability
- Assistance with product identification and order verification
- Sourcing support for compatible Beckhoff PLC hardware
- 1-year PLC Direct warranty
PLC Direct supplies Beckhoff industrial automation hardware for replacement and maintenance purposes and does not provide system design, programming, or integration services.