Machine Vision Systems

Keyence KV-DA40 Keyence

6,222.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-84220 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-84220
Type				Stopper for one touch mounting (Mounting bracket: PZ-B81, B83) (Without L-shaped bracket)
Applicable product				PZ-G Standard (Rectangular) model
Number included				1 pcs.
Material				SUS303, Polyacetal
Weight				Approx. 10 g

Keyence DL-RB1A Keyence

6,846.00 kr

Only 5 units left

Specifications

Model		DL-RB1A^*1
Indicator		Alarm indicator lamp (red), Power indicator lamp (green)
Sensor connection specifications	Number of connectable sensor units	Up to 15 units (including main unit)
BCD output specifications	I/O terminal	34-pin connector (MIL standard)
	Control output	BCD output: 4 outputs (1 digit) x 6 digits, signed output, strobe output, alarm output, NPN open-collector output: 40 V, 20 mA or less, residual voltage: 1 V or less, positive logic/negative logic (switchable)
	Control input	ID selection input: 4 inputs, data request input, no-voltage input (with contacts, without contacts); input time: 2 ms or more; short-circuit current: 1 mA
Power voltage		20 to 30 VDC, including ripple, Ripple (P-P): 10 % max. Class 2 (Supplied via connected sensor amplifier)
Power consumption		27 mA max.
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Case/Polycarbonate
Weight		Approx. 46 g
^*1 For connecting with sensor, please refer to the user's Manual

Keyence OP-88075 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88075
Overview				This is a relay connector cable with M12 on both ends. This connector cable is made of polyurethane (PUR), which has excellent oil resistance.
Applicable product				M12 connector sensor
Cable end				M12 straight connector - M12 straight connector
Length				2 m 6.56'
Material				Cable: Polyurethane (PUR)
Weight				Approx. 80 g 2.82 oz

Keyence GL-VM24LN Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM24LN
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			24
Total length			960 mm 37.80"
Detection height			920 mm 36.22"
Protection height			1005 mm 39.57"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.8
		OFF→ON	46.7 ^*3
		All blocked→ON	53.2 ^*4
	With channel A or B	ON→OFF	13.0
		OFF→ON	63.2 ^*3
		All blocked→ON	80.9 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	111 ^*5
		Receiver	125 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	52 ^*5
		Receiver	58 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		630 g 22.23 oz
	Receiver		640 g 22.59 oz
	Total		1270 g 44.83 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence AP-32K Keyence

3,780.00 kr

Only 2 units left

Specifications

Model		AP-32K
Type		Positive pressure, NPN
Rated pressure		0 to 14.50 PSI
Fluid type		Air or non-corrosive gases
Type of pressure		Gauge pressure
Display		3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm 0.43")
Display resolution		0.02 Psi, 0.1 kPa, 0.001 kgf/cm², 0.001 bar
Detectable pressure range		-15 to +110 % of F.S.
Display temperature characteristic		±1 % max. (of F.S.) of detecting pressure at 25 °C 77 °F (0 to 50 °C 32 to 122 °F)
Response time (Chattering prevention function)		2.5/5/100/500 ms (selectable)
I/O	Analog output	1 to 5 V (Load impedance: 47 kΩ min.)
	Control output	NPN open collector 100 mA max. (40 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable)
Rating	Power voltage	12 to 24 VDC ±10 %
	Current consumption	50 mA (at 24 V) or less, 90 mA (at 12 V) or less
Environmental resistance	Pressure resistance	72.5 PSI
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable
Weight		Approx. 120 g

Keyence FD-EPA0 Keyence

5,948.00 kr

Only 5 units left

Specifications

Model		FD-EPA0
Type		Zero line type^*1
Number of control outputs		─^*2
Number of analog outputs		─
Number of external inputs		─^*2
Power supply cable		No cable
Response time (90% response)	Flow rate	50 ms/100 ms/250 ms/1 s/5 s (selectable, initial value: 250 ms) ^*3
	Pressure	2.5 ms/10 ms/50 ms/100 ms/250 ms/1 s/5 s (selectable, initial value: 2.5 ms) ^*3
I/O	Control outputs 1, 2, and 3	Instantaneous flow/Accumulated flow/Pressure/Alarm output/Predictive maintenance output/Seating Confirmation (output 1 only)/Pulse output NPN/PNP setting switchable, 100 mA or less total for three outputs, residual voltage: 2.5 V or less
	Analog output	Instantaneous flow/Pressure 4-20 mA/0-20 mA (switchable), load resistance: 260 Ω or less
	External inputs 1 and 2	Zero flow/Origin adjust./Atmospheric pressure correction/Pressure zero shift/Reset total/App. learning/App. reset Short-circuit current: 1.5 mA or less
Network compatibility		NU Series compatibility
Number of connectible units		Eight units per one NU1 main unit; four units per one FS-MC8N/P main unit^*1
Protection circuit		Protection against incorrect head cable wiring
Power supply	Power voltage	24 VDC ± 10% (including ripple), Class2/LPS
	Power consumption	1400 mW excluding load current ^*4
Environmental resistance	Ambient temperature	−10°C to +55°C 14 to 131°F (no freezing)^*4
	Relative humidity	35%RH to 85%RH (no condensation)
	Vibration resistance	10 to 500 Hz, power spectral concentration: 0.816 G²/Hz, XYZ axes
	Shock resistance	100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material		Main unit: polycarbonate, FG terminal: copper/iron
Weight		Approx. 26 g 0.92 oz
^1 To use the zero line type, connect it to the FS-MC8N/P, NU Series. ^2 This counts as 2 outputs/2 inputs when connecting multiple units to the FS-MC8N/P, NU Series. ^3 5 ms is added to the analog output response time and the response is set to 63%. ^4 The ambient temperature to use varies depending on the number of adjacent cable type/M12 connector type units or depending on the number of expansion zero line type units added to the system. For 1 or 2 units, the temperature is 55°C 131°F. For 3 to 5 units, the temperature is 50°C 122°F. For 6 to 8 units, the temperature is 45°C 113°F. The prescribed values for the ambient temperature assume that the amplifier unit has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

Keyence OP-84219 Keyence

1,217.00 kr

In stock, 11 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV-010L2 Keyence

19,595.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CZ-K1 Keyence

4,393.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AP-31ZP Keyence

4,734.00 kr

Only 4 units left

Specifications

Model		AP-31ZP
Type		Negative-pressure Type, PNP
Rated pressure		0 to -101.3 kPa
Fluid type		Air or non-corrosive gases
Type of pressure		Gauge pressure, air or non-corrosive gases
Display		3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm 0.43"), Display cycle: 5 times/s
Display resolution		0.1 kPa (0.001 bar)
Detectable pressure range		-15 to +110 % of F.S.
Hysteresis		Variable (when hysteresis mode is selected), 0.5 % of F.S. in standard mode
Response time (Chattering prevention function)		2.5/5/100/500 ms (selectable)
I/O	Zero-shift input	Input time: 20 ms or more
	Control output	PNP open-collector 100 mA max. (30 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable)
Rating	Power voltage	12 to 24 VDC ±10 %
	Current consumption	50 mA (at 24 V) or less, 90 mA (at 12 V) or less
Environmental resistance	Pressure resistance	5.0 bar (500 kPa)
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone,Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable
Accessories		Mounting bracket A, mounting bracket B, hexagon socket head cap plug
Weight		Approx. 120 g

Keyence GL-VM28LN Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM28LN
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			28
Total length			1120 mm 44.09"
Detection height			1080 mm 42.52"
Protection height			1165 mm 45.87"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.0
		OFF→ON	48.6 ^*3
		All blocked→ON	55.4 ^*4
	With channel A or B	ON→OFF	13.7
		OFF→ON	60.8 ^*3
		All blocked→ON	79.6 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	123 ^*5
		Receiver	136 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	53 ^*5
		Receiver	59 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		730 g 25.76 oz
	Receiver		740 g 26.12 oz
	Total		1470 g 51.89 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence FD-83 Keyence

15,565.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VT-P10 Keyence

0.00 kr

Sold Out

Specifications

Model				VT-P10
Type				10" protective sheet
Applicable product				for VT5-X10
Number included				Set of 5 sheets
Note				black, without logo

Keyence OP-88472 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GS-M93P Keyence

0.00 kr

Sold Out

Specifications

Model		GS-M93P
Type		For hinged door High-holding force M12 Connector Advanced function
Holding force when locked		900N
Holding force when unlocked		Approx. 50N ^*1
Cascading		Max. 16 units
Operating distance	Sao(OFF→ON)	0.1 mm 0.004" ^*2
	Sar(ON → OFF)	15 mm 0.59" ^*2
Response time (ms)	Lock→Unlock	250 ms ^*3
	Unlock→Lock
	Detect→ Not detect	20 ms + 2 ms × (number of cascaded unit -1) ^*3
	Not detect→ Detect	300 ms + 25 ms × (number of cascaded unit -1) ^*3
Control output (OSSD output)	Output	Transistor outputs × 2
	Max. load current	150 mA
	Residual voltage (during ON)	Max. 2.5 V (with a cable length of 5 m 16.4') Max. 3.5 V (with a cable length of 31 m 101.7')
	OFF state voltage	Max. 2.0 V (with a cable length of 5 m 16.4') Max. 3.0 V (with a cable length of 31 m 101.7')
	Leakage current	Max. 0.5 mA
	Max. capacitive load	0.8 μF
	Load wiring resistance	Max. 2.5Ω
AUX (Non-safety related output)	Output	Transistor output (Only advanced function type has two outputs.)
	Max. load current	50 mA
	Residual voltage (during ON)	Max. 2.5 V(with a cable of 5 m 16.4') Max. 3.5 V(with a cable of 31 m 101.7')
External input (Short-circuit current)	Safety input	Approx. 1.5 mA × 2
	Reset/EDM input	Approx. 5 mA (For advanced function type only)
	Lock control input	Approx. 2.5 mA
	OSSD operation switching input	Approx. 2.5 mA (For advanced function type only)
Applicable Standards (Safety)		EN61508, IEC61508(SIL3), EN ISO13849-1:2015(PL e, Category 4), EN ISO14119(Type4), IEC60947-5-3, EN60947-5-3, UL 60947-5-2
Protection circuit		Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage	24 V DC ±20 % (Ripple P-P 10% or less, Class2)
	Power consumption	6 W
Environmental resistance	Enclosure rating	IP65/67 (IEC60529)
	Operating ambient temperature	-20 to 55°C -4 to 131°F (No freezing)
	Operating relative humidity	5% to 95%RH
	Storage temperature	-25 to 70°C -13 to 158°F(No freezing) ^*4
	Storage relative humidity	5% to 95%RH
	Vibration resistance	10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance	30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Main unit	PBT, PET/PAR, TPC, PC, Nickel-plated steel
	Actuator	PBT, Painted steel, Nickel-plated steel
	Mounting bracket	Aluminum (Plate and screw: Steel)
Weight	Main unit	Approx.480 g 16.93 oz
	Actuator	Approx.250 g 8.82 oz
^1 When the actuator is pulled first after unlocked, the holding force increases. ^2 Due to the flexible structure of the actuator, the guard can open 3.8 mm 0.15" larger than the "Sar". The clearance between the actuator and the main unit may be narrowed by a maximum of 2.3 mm 0.09" due to the magnet power built into the actuator. ^3 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of cascaded units -1). ^4 When stored for a long period of time, please store it at temperature of 55°C 131°F or lower.

Keyence GL-R12HG Keyence

31,785.00 kr

Only 8 units left

Buy the Keyence GL-R12HG - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence GL-R12HG is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence NQ-P4B2 Keyence

0.00 kr

Sold Out

Specifications

Model				NQ-P4B2
Length				2 m 6.6'
Material				PVC
Weight				Approx. 80 g 2.82 oz

Keyence OP-42324 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-42324
Type				Twin Light Guide for Coaxial Micro Lens
Overview				Twin-type light guide for mounting optical fiber lighting.
Applicable product				CV-F10, CA-LMAx

Keyence NR-XW1 Keyence

0.00 kr

Sold Out

Specifications

Model		NR-XW1 ^*1
Applicable models		NR-X100W^*2
Wireless LAN	Wireless standard	IEEE 802.11b/g/n
	Radio frequency	2.4 GHz
	Security	WPA-PSK (AES)
	Network type	Access point mode (main unit)
Countries in compliance with Radio Act		USA, Japan, China, Europe^*3
Power supply		Supplied from NR-X100W
Power supply	Power consumption	1.2 W or less
Environmental resistance	Ambient temperature	0 to +40°C 32°F to 104°F
	Relative humidity	10 to 85% RH (no condensation)
Weight		Approx. 40 g 1.41 oz
^1 Do not use the NR-XW1 in countries that are not in compliance with the Radio Act. ^2 Cannot be used when using the LAN port on the NR-X100W master data collection unit. When acquiring data from a PC (using WAVE LOGGER X software), acquisition may stop depending on the wireless LAN communication environment and the acquisition rate. Use the main unit’s automatic saving function to save data to the SD card in the main unit as well when using the acquisition function. ^*3 Refer to the CE Marking section in the NR-XW1 instruction manual for more information for Europe.