Machine Vision Systems

4,422.00 kr

Only 5 units left

Specifications

Model		FD-EPA1C
Type		M12 connector type^*1
Number of control outputs		3
Number of analog outputs		1
Number of external inputs		2
Power supply cable		Pigtail, 100 mm 3.94", M12 connector, 8 pins
Response time (90% response)	Flow rate	50 ms/100 ms/250 ms/1 s/5 s (selectable, initial value: 250 ms) ^*2
	Pressure	2.5 ms/10 ms/50 ms/100 ms/250 ms/1 s/5 s (selectable, initial value: 2.5 ms) ^*2
I/O	Control outputs 1, 2, and 3	Instantaneous flow/Accumulated flow/Pressure/Alarm output/Predictive maintenance output/Seating Confirmation (output 1 only)/Pulse output NPN/PNP setting switchable, 100 mA or less total for three outputs, residual voltage: 2.5 V or less
	Analog output	Instantaneous flow/Pressure 4-20 mA/0-20 mA (switchable), load resistance: 260 Ω or less
	External inputs 1 and 2	Zero flow/Origin adjust./Atmospheric pressure correction/Pressure zero shift/Reset total/App. learning/App. reset Short-circuit current: 1.5 mA or less
Network compatibility		IO-Link^*3
Number of connectible units		─
Protection circuit		Protection against reverse power connection, output overcurrent, output surge, reverse output connection, and incorrect head cable wiring
Power supply	Power voltage	24 VDC + 20%/− 10% (including ripple), Class2/LPS
	Power consumption	1870 mW excluding load current ^4^5
Environmental resistance	Ambient temperature	−10°C to +55°C 14 to 131°F (no freezing)^*5
	Relative humidity	35%RH to 85%RH (no condensation)
	Vibration resistance	10 to 500 Hz, power spectral concentration: 0.816 G²/Hz, XYZ axes
	Shock resistance	100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material		Main unit: polycarbonate, FG terminal: copper/iron
Weight		Approx. 42 g 1.48 oz
^1 Ensure the cable length is 30 m 98.4' or less (20 m or less when using IO-Link) for the M12 connector type. ^2 5 ms is added to the analog output response time and the response is set to 63%. ^3 IO-Link: Compatible with specification v1.1/COM3 (230.4 kbps). ^4 190 mA or less with the load included. ^*5 The ambient temperature to use varies depending on the number of adjacent cable type/M12 connector type units or depending on the number of expansion zero line type units added to the system. For 1 or 2 units, the temperature is 55°C 131°F. For 3 to 5 units, the temperature is 50°C 122°F. For 6 to 8 units, the temperature is 45°C 113°F. The prescribed values for the ambient temperature assume that the amplifier unit has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

Keyence SJ-C2U Keyence

2,055.00 kr

Only 8 units left

Specifications

Model				SJ-C2U
Type				10-pin I/O cable
Length				2 m 6.6'

Keyence KV-16T2W Keyence

9,864.00 kr

Only 7 units left

Buy the Keyence KV-16T2W - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence KV-16T2W is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence FS-T1G Keyence

5,212.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-RB11 Keyence

6,645.00 kr

Only 1 unit left

Specifications

Model				GL-RB11
Type				Straight Fittings
Applicable product				GL-R Series
Number included				Assembled bracket: 2 units
Material				Main bracket unit/plate nut: SPHC, Hexagonal-socket bolt: Iron (trivalent black)
Weight				Approx. 150 g

Keyence OP-66832 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-66832
Overview				Specialised polarisation filter for the compact camera (ø17).
Applicable product				XG-S200C, XG-S200M, CV-S200C, CV-S200M

Keyence CA-DBB50H Keyence

0.00 kr

Sold Out

Specifications

Model				CA-DBB50H
Type				High-Intensity, Large Bar Lights
LED color				Blue
Power consumption				19.8 W × 2 ch^*1
Input voltage				12 VDC
Weight				Approx1490 g
^*1 Connect these models to both channels.

Keyence OP-75351 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-75351
Overview				CAB structure tungsten electrode probe.
Applicable product				SJ-M020G
Material				Tungsten

Keyence SV2-BE3G Keyence

0.00 kr

Sold Out

Specifications

Model				SV2-BE3G
Type				Encoder cable, Hi-flex robotic cable with battery
Length				3 m 9.8'
Note				for 50 to 750 W motor

Keyence EH-308S Keyence

1,592.00 kr

In stock, 23 units

Specifications

Model		EH-308S
Type		with stainless steel spiral tube, Shielded , Cylindrical
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		10 x 10 mm 0.39" x 0.39"
Stable detecting range		0 to 2 mm0.08"
Maximum detecting distance		5 mm0.20"
Hysteresis		0.04 mm0.002"
Repeatability		0.005 mm0.0002"
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -10 to +60°C 14 to 140°F
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 88 g (including 3-m 9.8' cable)

Keyence SV2-C10C Keyence

0.00 kr

Sold Out

Specifications

Model				SV2-C10C
Type				Motor power cable, Standard
Length				10 m 32.8'
Note				for 750 W motor

Keyence CA-CH10L Keyence

4,972.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-84331 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-84331
Type				Amplifier mounting bracket
Applicable product				GT2-100 Series

Keyence OP-66869 Keyence

0.00 kr

Sold Out

Specifications

Model		OP-66869^*1
Type		Compact mounting bracket for thrubeam
Applicable product		LV-S71, LV-S72
Detecting distance	MEGA	500 mm 19.69"
	ULTRA
	SUPER
	TURBO
	FINE
	HSP
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Metal part: Stainless steel
Weight		Approx. 14 g
^*1 Contains a symmetrical mounting bracket (two in total).

Keyence MP-FCBC80 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XC-H40D-05 Keyence

0.00 kr

Sold Out

Specifications

Model				XC-H40D-05
Cable length				5 m 16.4'
Cable shape				MIL - loose wires

Keyence MP-F10ADN Keyence

0.00 kr

Sold Out

Specifications

Model				MP-F10ADN
Type				Auto drain cup
Connection diameter				NPT3/8 (10A)
Material				Nylon

Keyence FT-50AWP Keyence

6,043.00 kr

Only 6 units left

Specifications

Model		FT-50AWP
Type		DIN-rail mounting type
Power voltage		12 to 24 VDC, Ripple (P-P)10% max.
Power consumption	Normal	1400 mW (For 12 V), 1600 mW (For 24 V)
	Eco mode	1150 mW (For 12 V), 1350 mW (For 24 V)
Display method		4 + 1/two-digit 7-segment LED, dual-display (red/green) display (character height in the upper display (red): 8 mm 0.31", character height in the lower display (green): 5.7 mm 0.22"), Display updating cycle: 10/s
Operation indicator		Red LED x 3 (control output1/control output2/timing input indicator)
Display resolution		0.2°F or 1.8°F (0.1°C or 1°C) (when using H10/H20/H30), 1.8°F (1°C) (when using H50/H40K/H50K)
Hysteresis		Variable
Response speed		HSP, 30, 100, 200, 500, 1000, or 5000 ms can be selected (In HSP: 15 ms max.)
Bank selection		Pink and Purple wires can be configured for Bank Inputs #1,2 respectively for up to 4 total banks.
Bank specifications		Emissivity (valid in temperature mode) and limit settings x 2 can be set for each bank.
External input	Timing input	Input time: 2 ms min.
	Bank input	Input time: 20 ms min.
Control output		PNP open collector x 2 channels (N.O./N.C. selectable), 50 mA max. 30 VDC max., residual voltage: 1 V max.
Analog output		4 to 20 mA, maximum load resistance: 260 Ω The upper- and lower-limit values of the analog output range can be set optionally.
Environmental resistance	Ambient temperature	-14 to +122°F (-10 to +50°C), No freezing ^*1
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
Material		Main unit, Cover: Polycarbonate, Keycaps: Polyester elastomer, Cable: Vinyl chloride Mounting bracket: SPCC
Accessory		DIN anchoring fixture, power cable, unit cover sticker
Weight		Approx. 85g
^*1 Ambient temperature when using the analog output is 14 to 113°F (-10 to 45°C) .

Keyence CA-SD4G Keyence

9,575.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-MA1 Keyence

5,409.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-M10AYP Keyence

9,768.00 kr

Only 8 units left

Buy the Keyence FD-M10AYP - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FD-M10AYP is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence KV-RC32BT Keyence

6,434.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GS-M51N Keyence

6,775.00 kr

Only 3 units left

Specifications

Model		GS-M51N
Type		For hinged door Small M12 Connector Standard
Holding force when locked		500N
Holding force when unlocked		Approx. 30N ^*1
Cascading		Max. 20 units
Operating distance	Sao(OFF→ON)	0.1 mm 0.004" ^*2
	Sar(ON → OFF)	15 mm 0.59" ^*2
Response time (ms)	Lock→Unlock	250 ms ^*3
	Unlock→Lock
	Detect→ Not detect	20 ms + 2 ms × (number of cascaded unit -1) ^*3
	Not detect→ Detect	300 ms + 25 ms × (number of cascaded unit -1) ^*3
Control output (OSSD output)	Output	Transistor outputs × 2
	Max. load current	150 mA
	Residual voltage (during ON)	Max. 2.5 V (with a cable length of 5 m 16.4') Max. 3.5 V (with a cable length of 31 m 101.7')
	OFF state voltage	Max. 2.0 V (with a cable length of 5 m 16.4') Max. 3.0 V (with a cable length of 31 m 101.7')
	Leakage current	Max. 0.5 mA
	Max. capacitive load	0.8 μF
	Load wiring resistance	Max. 2.5Ω
AUX (Non-safety related output)	Output	Transistor output (Only advanced function type has two outputs.)
	Max. load current	50 mA
	Residual voltage (during ON)	Max. 2.5 V(with a cable of 5 m 16.4') Max. 3.5 V(with a cable of 31 m 101.7')
External input (Short-circuit current)	Safety input	Approx. 1.5 mA × 2
	Reset/EDM input	Approx. 5 mA (For advanced function type only)
	Lock control input	Approx. 2.5 mA
	OSSD operation switching input	Approx. 2.5 mA (For advanced function type only)
Applicable Standards (Safety)		EN61508, IEC61508(SIL3), EN ISO13849-1:2015(PL e, Category 4), EN ISO14119(Type4), IEC60947-5-3, EN60947-5-3, UL 60947-5-2
Protection circuit		Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage	24 V DC ±20 % (Ripple P-P 10% or less, Class2)
	Power consumption	5 W
Environmental resistance	Enclosure rating	IP65/67 (IEC60529)
	Operating ambient temperature	-20 to 55°C -4 to 131°F (No freezing)
	Operating relative humidity	5% to 95%RH
	Storage temperature	-25 to 70°C -13 to 158°F(No freezing) ^*4
	Storage relative humidity	5% to 95%RH
	Vibration resistance	10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance	30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Main unit	PBT, PET/PAR, TPC, PC, Nickel-plated steel
	Actuator	PBT, SUS304, Nickel-plated steel
	Mounting bracket	Aluminum (Plate and screw: Steel)
Weight	Main unit	Approx.250 g 8.82 oz
	Actuator	Approx.160 g 5.64 oz
^1 When the actuator is pulled first after unlocked, the holding force increases. ^2 Due to the flexible structure of the actuator, the guard can open 3.8 mm 0.15" larger than the "Sar". The clearance between the actuator and the main unit may be narrowed by a maximum of 2.3 mm 0.09" due to the magnet power built into the actuator. ^3 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of cascaded units -1). ^4 When stored for a long period of time, please store it at temperature of 55°C 131°F or lower.

Keyence NR-CM01W Keyence

0.00 kr

Sold Out

Specifications

Model		NR-CM01W
Type		Wide field of view model
PC interface	USB communications standard	USB2.0 High Speed
	Supported OS	Windows® 11 Home/Pro/Enterprise Windows® 10 Home/Pro/Enterprise
Power supply		USB bus power
Power consumption		650 mW max.
Image sensor		Color CMOS
Image resolution		Up to 1920 × 1080
Frame rate		Up to 30 fps
Optical performance	Field of view	At 100 3.94" mm distance: 350 × 190 mm 13.78" × 7.48" At 300 mm 11.81" distance: 1040 × 590 mm 40.94" × 23.23" At 1000 mm 39.37" distance: 3490 × 1960 mm 137.40" × 77.17" ^*1
	Installation distance	100 mm 3.94" or more
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	−20 to 55°C −4°F to 131°F (no freezing)
	Relative humidity	85% RH or less (no condensation)
Material		Body: Aluminum, Window: Acrylic, Connector: Brass (nickel plated)
Weight		Approx. 120 g 4.23 oz
^*1 Fields of view are reference values.