Machine Vision Systems

Keyence DL-RB1 Keyence

8,997.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88884 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-M020AS Keyence

3,920.00 kr

Only 3 units left

Specifications

Model				SV2-M020AS
General specifications	Applicable servo amplifier			SV2-020L2
	Rated output			200 W
	Rated torque			0.637 N·m ^*1
	Instant maximum torque			2.23 N·m
	Rated current			1.6 Arms
	Instant maximum current			5.8 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.444 N·m/Arms
	Rotor moment of inertia			0.263 ×10^-4kg·m²
	Rated power rating			15.4 kW/s
	Rated angle acceleration			24200 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			15 ×
	Approx. weight			0.8 kg
^*1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink.

Keyence CA-DQW40X Keyence

33,743.00 kr

Only 5 units left

Specifications

Model		CA-DQW40X
Illumination method		Square lighting LumiTrax lighting/Normal lighting Constant current control mode (1024-step digital gradation)
Response speed		1 ms or less
LED	Color	White
	Number of LEDs	168
Dimension		490 mm × 490 mm × 81.8 mm 19.29" × 19.29" × 3.22"(not including the connector)
Dimension	Inner Diameter	400 mm × 400 mm 15.75" × 15.75"(not including the connector)
Controller Connection	I/F	12-pole circular connector (dedicated cable)
	Cable	Dedicated cable (3 m 9.8', 5 m 16.4', 10 m 32.8'), 30 m 98.4' max. (when using extension cables^*1)
	Illumination Expansion Unit	CA-DC60E
Connection with External Power Supply	I/F	3-pole circular connector (dedicated cable)
	Cable	Dedicated cable (2 m 6.6', 5 m 16.4', 10 m 32.8')^*2
	Power voltage	24 VDC +25%, -20%
Power consumption		156W(8.1A)(current consumption)
Environmental resistance	Ambient temperature	0 to +40°C 32°F to 104°F
	Relative humidity	85%RH or less (No condensation)
Weight		Approx. 3.0 kg
^1 Up to two extension cables can be connected to the dedicated cable. ^2 Connection can be extended up to 30 m 98.4' by using an AWG12 cable.

Keyence OP-42105 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DZW45 Keyence

42,161.00 kr

Only 2 units left

Specifications

Model				CA-DZW45
Type				Line Light
LED color				White
Power consumption				28.4 W^*1
Input voltage				12 VDC
Weight				Approx. 1,280 g
^*1 When using a line camera with the CA-DC21E & CA-DC40E, set light configuration to DC mode.

Keyence LT-9011M Keyence

49,287.00 kr

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-71Z Keyence

1,317.00 kr

Only 9 units left

Specifications

Model		FU-71Z^*1
Optical axis diameter (Standard target to be detected)		ø1.5 mm 0.06"
Size		M6
Fibre unit length		2 m 6.56', Free-cut
Fibre unit diameter		ø2.2 ø0.09"
Shape		Threaded
Minimum bend radius		R2 mm R0.08", ToughFlex
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F
Weight		Approx. 25 g
^*1 For details on the detecting distance, see the fiber amplifier catalog.

Keyence XG-H200M Keyence

6,502.00 kr

Only 5 units left

Buy the Keyence XG-H200M - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence XG-H200M is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence OP-87772 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV3-MSD8G Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ER-GM08P03C Keyence

0.00 kr

Sold Out

Specifications

Model		ER-GM08P03C
Type		General-purpose all-metal shielded type Screw type M8 Connector with pigtail (M12 4-pin) PNP output Mid-Range
Power supply cable length		0.3 m 1.0' ^*1
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		None
Button	Function	―
Detecting distance		2 mm 0.08" ±10% ^*2
Response frequency		120 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		8 × 8 mm 0.31" × 0.31"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303, Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 40 g 1.41 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence MB-HDX Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88615 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88615
Length				0.1 m 0.3'

Keyence OP-88969 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88969
Length				20 m 65.6'

Keyence CA-DZR15 Keyence

0.00 kr

Sold Out

Specifications

Model				CA-DZR15
LED color				red
Power consumption				7.6 W
Weight				Approx 480 g

Keyence KV-C64XA Keyence

8,275.00 kr

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PR-F51CN Keyence

0.00 kr

Sold Out

Specifications

Model		PR-F51CN
Type		Thrubeam
Output		NPN
Shape		Flat
Cable connection		M8 connector (4 pin)
Detection distance		0.6 m
Number of control outputs		2
Output operation	Output 1	Dark-ON
	Output 2	Light-ON
Response time	Output 1	0.5 ms
	Output 2	ON→OFF: 2.7 ms, OFF→ON: 0.5 ms
Sensitivity adjustment		None
Spot diameter		-
Light source		4 element, point light source, red LED (650 nm)
Mutual interference prevention function		-
Indicator lamp		Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)
Control output		30 VDC or lower, 50 mA or lower Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.
Protection circuit		Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %
	Current consumption	Transmitter: 11 mA, Receiver: 16 mA
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250)
	Insulation resistance	20 MΩ or higher (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower
	Ambient temperature	-25 to +55 °C -13 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin
Accessories		Instruction Manual
Weight		Approx. 20 g

Keyence BT-HMT2 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV4-500MA Keyence

47,240.00 kr

Only 5 units left

Specifications

Model		IV4-500MA
Type		Standard model
Installed distance		From 50 mm 1.97" ^*1
Tools	Available modes	Standard Mode, Sorting Mode, AI Through Count Mode
	Tool with standard mode	Standard/Sorting Modes: AI Differentiate, Outline, ColorArea ^2, Area ^3, EdgePixels, ColorAverage ^2, Brightness Avg ^3, Width, Diameter, Edge Presence, Pitch, Color Prohibit, Position Adjustment, Hi-Sp. Adj (1-axis/2-axis), Blob Count, AI Identify, AI Count, Total, AI OCR, AI Trigger AI Through Count Mode: Count, Total
	Number of tools	65 tools ^*4
Field of view		Installation distance 50 mm 1.97": 22 (H) × 16 (V) mm to Installation distance 3000 mm 118.11": 1184 (H) × 888 (V) mm (reference value)
Switch settings (programs)		128 programs (with SD card)/32 programs (without SD card)
Image receiving element	Type	1/2.9 inch monochrome CMOS
	Number of pixels	1280 (H) × 960 (V)
Image history	Number of storable images	100 images ^*5
	Save conditions	Logging Settings 1: NG only/OK near NG threshold ^6/All – selectable. Logging Settings 2: Manually configured number before/after NG/Fixed interval – selectable ^5
Focus adjustment		Auto ^*7
Image data transfer	Transfer destination	microSD card/FTP server/SFTP server – selectable
	Transfer format	BMP/JPEG/iv4p/txt: Selectable, file name can be changed
	Transfer conditions	OK/NG/NG and OK near threshold ^6/OK near threshold ^6/All/Judgment Complete – selectable
Exposure time		12 μs to 10 ms ^*8
Analysis information	RUN display	Tool-specific list (judgment results, match, match bar display) ^*9
	RUN information	Switchable between OFF/histogram/processing time/count/output monitor Histogram: Histogram, match (MAX, MIN, AVG), OKs, NGs Processing time: Processing time (latest value, MAX, MIN, AVG), cap. time (latest value, MAX, MIN, AVG) Count: No. of triggers, OKs, NGs, no. of trigger errors, Output monitor: Output-specific ON/OFF status ^*9
Lights	Illumination	Infrared LED
	Lighting method	Pulse lighting
Other functions	Image capture function	Digital zoom (×2, ×4), HDR, high gain, color filters ^2, white balance ^2, brightness correction, Smart Image Optimization, preliminary capture, trapezoidal shape correction, mirror inversion correction Capture range settings (with high-speed filter disabled: 1280×960, 640×480, 320×240, 160×120. With high-speed filter enabled: 640×480, 320×240, 160×120, 80×60)
	Tool functions	Additional Learning (AI Differentiate, AI Identify, AI OCR, AI Count, AI Trigger. AI Through Count Mode: Count), remove outline, masking function, color extraction/exclusion ^2, color histogram function ^2, monochrome histogram function ^*3, scaling function
	Utilities	List of NG sensor occurrences, NG hold, test run, I/O monitor, security settings (2-step password, Enhanced Security Mode), simulator ^*10, adding FTP image information, multiple position adjustment, adding multiple masters, high-speed program switching, automatic program switching, automatic settings backup/restore, mid-operation threshold changes, excessive input trigger time detection
Indicators		OUT, TRIG, STATUS, LINK/ACT, SD
Input	Type	Switchable between non-voltage input/voltage input For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current approx. 2 mA (at 24 V)
	Number of inputs	6, 3 of which are selectable between IN/OUT
	Function	IN1: External trigger. IN2, IN3, I/O1 to I/O3: Assign any desired function. Assignable functions: Program switching, error clear, ext. master image registration, SD card save stop, OCR serial no. increment, reset
Output	Type	Open collector output: Switchable between NPN/PNP and N.O./N.C. Maximum rating: 30 V, 50 mA, residual voltage 1.5 V or lower ^*11
	Number of outputs	6, 3 of which are selectable between IN/OUT
	Function	Assign any desired function. Assignable functions (Standard/Sorting Mode): Total status (OK/NG), operation, busy, trigger ready, strobe, position adjustment result, tool-specific judgment results, tool-specific logic calculation results, error, SD card error, parts judgment results, master judgment results, insufficient SD capacity, file transfer in progress, AI Trigger output Assignable functions (AI Through Count Mode): Operation, busy, error, tool-specific count up, tool-specific judgment result, tool-specific logic calculation result
Power/I/O	Connector	M12 12-pin A-code male connector
	PoE	PoE Power Class 4/6 ^*12
Ethernet	Standard	1000BASE-T/100BASE-TX
	Connector	M12 8-pin X-code female connector
Network function		FTP client, SFTP client, SNTP client, OPC UA server, MQTT client
Interface compatibility	Built-in Ethernet	EtherNet/IP, PROFINET CC-B ^*13, TCP/IP Nonprocedural Comm (×2 connections)
	Communication unit (IV4-CU1)	PROFINET CC-C ^*14, EtherCAT®
Expanded memory		microSD card (microSD/microSDHC) ^*15
Power supply	Power voltage	24 V +25%, -20% (including ripple) ^*16
	Power consumption	3.4 A or less (at 19.2 V), 2.7 A or less (at 24.0 V)(no AI imaging illumination unit; with communication unit; includes 120 mA output load) 3.3 A or less (at 19.2 V), 2.6 A or less (at 24.0 V)(no AI imaging illumination unit; no communication unit; includes 120 mA output load) 2.1 A or less (at 19.2 V), 1.8 A or less (at 24.0 V)(with AI imaging illumination unit; with communication unit; includes 120 mA output load) ^*17
	Average power consumption	9.3 W (without AI imaging illumination unit) 12.8 W (with AI imaging illumination unit)
Environmental resistance	Enclosure rating	IP67 ^*18
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing) ^*19
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	Frequency: 10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions ^*20
	Shock resistance	500 m/s² 1640.4 ft/s² 3 times in each of 6 directions ^*20
Material		Main unit case: Aluminum die-casting. Front cover: Acrylic (hard coating). Back plastic cover and plastic lid: PBT. Operation indicator cover: TPU. Power supply connector: PA/POM. Ethernet connector: Copper alloy + nickel plating. Label: PC. Power supply connector waterproof cap: PC + ABS alloy. Ethernet connector waterproof cap: PC ^*21
Weight		Approx. 370 g 13.06 oz (no AI imaging illumination unit) Approx. 560 g 19.77 oz (with AI imaging illumination unit)
^1 If using at 3 m 9.8' or more, it is recommended that the polarizing filter be removed before use. ^2 Color type only. ^3 Monochrome type only. ^4 Can be placed on a program-specific basis. This is the total combined number of differentiation tools and position adjustment tools. Up to 64 differentiation tools can be placed. Up to 16 AI Count/AI OCR tools can be placed. In Sorting Mode, 8 differentiation tools can be placed. In AI Through Count Mode and High Speed/Standard Mode, the number of tools that can be placed is two AI Count tools and one Total tool. For high accuracy, six AI Count tools and two Total tools can be placed. ^5 Saved to the sensor’s internal memory. Images saved to the sensor’s internal memory can be backed up to a PC using the PC software (IV-H1SN) or to a USB memory stick or microSD card plugged into the control panel (IV4-CP70) or Display Expansion Unit (IV4-DU10). ^6 AI Differentiate, AI Identify, AI OCR(Show Matching Rate) only. ^7 Focus position can be automatically adjusted during installation. It cannot be adjusted while running. Focus position can be registered separately for each program. ^8 Maximum exposure time is 500 ms only when lighting is set to OFF. ^9 Can be displayed on the control panel (IV4-CP70) or Display Expansion Unit (IV4-DU10), or via PC software (IV-H1SN). ^10 Can be used with PC software (IV-H1SN). ^11 Set total output to 120 mA or less. Residual voltage specifications apply to an output current of 20 mA or less. For an output current of 50 mA, the value is 2.0 V. ^12 For PoE-powered devices, IEEE802.3at Power Class 4 or higher is recommended when using AI imaging illumination units; IEEE802.3bt Power Class 6 or higher is recommended when an AI imaging illumination unit is not in use. When using PoE, device operation may be restricted due to power limitations. ^13 Conformance Class B, applicable protocols: LLDP, SNMP ^14 Conformance Class C, applicable protocols: LLDP, SNMP, MRP ^15 Use KEYENCE-recommended products. ^16 24 VDC +25%/−10% (including ripple) when using OP-88656 (10 m 32.8'). ^17 The system is designed to lower its peak current when equipped with an AI imaging illumination unit. Without it, the peak current will be higher. ^18 Except when polarizing filters (OP-88640/OP-88641/OP-88644/OP-88645) are installed. ^19 When the operating ambient temperature exceeds 40°C 104°F, install in accordance with KEYENCE instructions, taking appropriate measures for heat dissipation to ensure that the case temperature does not exceed the rated 75°C 167°F. Refer to the instruction manual for more information. ^20 Except when dome attachment (IV3-D10) is installed. ^*21 ESD safe and IEC61340-5-1 compliant.

Keyence OP-88456 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88456
Length				2 m 6.6'
Material				PVC
Weight				Approx. 60 g 2.11 oz

Keyence CA-DSB15 Keyence

12,551.00 kr

Only 3 units left

Specifications

Model				CA-DSB15
Type				Back Light
LED color				Blue
Power consumption				27.4 W
Input voltage				12 VDC
Weight				Approx. 320 g

Keyence OP-89048 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-83200 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-83200
Overview				Front protective cover protecting detection side of light curtain.
Applicable product				SL-V80H, SL-V40L
Number included				1 pcs.
Length				1,590.2 mm 62.61"
Material				Translucent plastic: Polycarbonate Black plastic: ABS
Note				To install this product on both the transmitter and receiver, 2 sets are required. Use the dimming filters (sold separately) by attaching them to the front protection cover. When the front protection cover is attached, the L-shaped mounting bracket (OP-42