Schneider_New_Products

5001 products

Showing 4201 - 4224 of 5001 products

Showing 4201 - 4224 of 5001 products
View
Schneider New Stock Image
Schneider LXM62DU60A21000 Schneider
€3.154,95
Only 1 unit left
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM62DD45C21011 Schneider
€7.243,95
Only 3 units left
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM62DD27F21000 Schneider
€4.868,95
Only 5 units left
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM62DD27C21020 Schneider
€4.377,95
Only 1 unit left
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM62DD27A21000 Schneider
€4.484,95
Only 2 units left

Main

Characteristic Value(s)
Range of product PacDrive 3
Device short name LXM 62
Product or component type Single drive
Component name LXM62

Complementary

Characteristic Value(s)
Network number of phases Three phase
[Us] rated supply voltage 400 V (- 10...10 %) for three phase
230 V (- 10...10 %) for three phase
230 V (- 10...10 %) for single phase
Supply frequency 50/60 Hz - 5...5 %
Continuous output current 9 A at 4 kHz
Output current 3s peak 27 A
Switching frequency 8 kHz
Overvoltage category III
Electrical connection Terminal, clamping capacity: 0.2...15 mm², AWG 24...AWG 16 (CN4)
Terminal, clamping capacity: 0.5...16 mm², AWG 20...AWG 6 (CN5)
Terminal, clamping capacity: 0.75...16 mm², AWG 18...AWG 6 (CN6)
Terminal, clamping capacity: 0.2...6 mm², AWG 24...AWG 10 (CN7)
Tightening torque CN1: 2.5 N.m
Number of inputs 2 digital
2 touch probe
Discrete input voltage 24 V DC for - 20...25 %
Number of outputs 2 digital
Discrete output voltage 24 V DC
Safety function STO (safe torque off)
Communication interface SERCOS III, integrated
Product weight 3 kg
Schneider New Stock Image
Schneider LXM62D27D21000 Schneider
€0,00
Sold Out
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM62DD27B21000 Schneider
€4.027,95
Only 1 unit left

Main

Characteristic Value(s)
Range of product PacDrive 3
Device short name LXM 62
Product or component type Double drive
Component name LXM62

Complementary

Characteristic Value(s)
Network number of phases Three phase
[Us] rated supply voltage 400 V (- 10...10 %) for three phase
230 V (- 10...10 %) for three phase
230 V (- 10...10 %) for single phase
Supply frequency 50/60 Hz - 5...5 %
Continuous output current 9 A at 4 kHz
Output current 3s peak 27 A
Switching frequency 8 kHz
Overvoltage category III
Electrical connection Terminal, clamping capacity: 0.2...15 mm², AWG 24...AWG 16 (CN4)
Terminal, clamping capacity: 0.5...16 mm², AWG 20...AWG 6 (CN5)
Terminal, clamping capacity: 0.75...16 mm², AWG 18...AWG 6 (CN6)
Terminal, clamping capacity: 0.2...6 mm², AWG 24...AWG 10 (CN7)
Tightening torque CN1: 2.5 N.m
Number of inputs 2 digital
2 touch probe
Discrete input voltage 24 V DC for - 20...25 %
Number of outputs 2 digital
Discrete output voltage 24 V DC
Safety function STO (safe torque off)
Communication interface SERCOS III, integrated
Product weight 3 kg
Schneider New Stock Image
Schneider LXM62DD15D Schneider
€3.557,95
Only 1 unit left
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM62DD15C21 Schneider
€0,00
Sold Out
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM52DU60C41000 Schneider
€3.565,95
Only 4 units left

This product is part of the Lexium 52 & Motors range, an offer of standalone servo drives for PacDrive 3. The single drive features SERCOS III physical interface. It offers 4 digital/4 touch probe inputs and 2 digital outputs. It is a single drive with a rated supply voltage of 208V to 480V, a continuous output current of 1.5A and a continuous power of 0.4kW. It is furnished with connector terminals for electrical connection. It is an IP20 rated product. It weighs 1.8kg. It is suitable for general machine control, packaging machine automation and material handling applications. This product is certified by CE and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motor SH3 (55mm, 1 motor stack), servo motor SH3 (55mm, 2 motor stacks) and servo motor SH3 (70mm, 2 motor stacks). Lexium 52 provides an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Lexium Stand alone servo drives from 0.4kW and 7kW for PacDrive based automation solutions.

Main

Characteristic Value(s)
Range of Product PacDrive 3
Device short name LXM 52
Product or Component Type Single drive
Product compatibility Servo motor SH3 2.2 in (55 mm), 1 optimized in terms of torque and speed
Servo motor SH3 2.2 in (55 mm), 2 optimized in terms of torque and speed
Servo motor SH3 2.8 in (70 mm), 2 optimized in terms of high torque
Servo motor MH3 2.8 in (70 mm), 1 optimized in terms of torque and speed
Component name LXM52

Complementary

Characteristic Value(s)
Phase Three phase
[Us] rated supply voltage 208...480 V - 15...10 %
Supply frequency 50...60 Hz - 5...5 %
Continuous output current 1.5 A 8 kHz
Output current 3s peak 6 A
Continuous power 0.8 kW
Nominal power 0.4 kW
Switching frequency 8 kHz
Overvoltage category III
Electrical connection Terminal 0.75...5.3 mm², AWG 18...AWG 10 CN1)
Terminal 0.75...5.3 mm², AWG 18...AWG 10 CN10)
Tightening torque CN1 6.02 lbf.in (0.68 N.m)
CN10 6.02 lbf.in (0.68 N.m)
Number of inputs 4 digital
4 touch probe
Discrete input voltage 24 V DC
Number of outputs 2 digital
Discrete output voltage 24 V DC
Contact bounce time > 1 ms compliment of STO_A, compliment of STO_B
Communication interface SERCOS III, Integrated
Width 1.9 in (48 mm)
Height 10.6 in (270 mm)
Depth 8.5 in (217 mm)
Product Weight 4.0 lb(US) (1.8 kg)
Schneider New Stock Image
Schneider LXM62D15D21000 Schneider
€0,00
Sold Out
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM52DD18C41010 Schneider
€3.002,95
Only 1 unit left
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM32MU45M2 Schneider
€875,95
Only 4 units left

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture, 2 safety, 4 logic discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V (single phase), a continuous output current of 1.5A at 8kHz and a continuous power of 500W at 230V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. CANopen, CANmotion, Ethernet/IP, EtherCAT, Profibus, DeviceNet possible with option card. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.7kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motor BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

Main

Characteristic Value(s)
Range of Product Lexium 32
Device short name LXM32M
Product or Component Type Motion servo drive
Format of the drive Book
Phase Single phase
[Us] rated supply voltage 100...120 V - 15...10 %
200...240 V - 15...10 %
Supply voltage limits 85…132 V
170…264 V
Supply frequency 50/60 Hz - 5...5 %
Network Frequency 47.5...63 Hz
EMC filter Integrated
Continuous output current 1.5 A 8 kHz
Output current 3s peak 3 A 115 V 5 s
4.5 A 230 V 5 s
Continuous power 200 W 115 V
500 W 230 V
Nominal power 0.15 kW 115 V 8 kHz
0.3 kW 230 V 8 kHz
Line current 2.6 A 85 % 115 V, with external line choke 5 mH
3.4 A 100 % 230 V, with external line choke 5 mH
2.9 A 173 % 115 V, without line choke
2.9 A 181 % 230 V, without line choke

Complementary

Characteristic Value(s)
Switching frequency 8 kHz
Overvoltage category III
Maximum leakage current 30 mA
Output voltage <= power supply voltage
Electrical isolation Between power and control
Type of cable Single-strand IEC cable 122 °F (50 °C)) copper 90 °C XLPE/EPR
Electrical connection Terminal 3 mm², AWG 12 CN8)
Terminal 5 mm², AWG 10 CN1)
Terminal 5 mm², AWG 10 CN10)
Tightening torque CN8 4.4 lbf.in (0.5 N.m)
CN1 6.2 lbf.in (0.7 N.m)
CN10 6.2 lbf.in (0.7 N.m)
Discrete input number 2 capture
2 safety
4 logic
Discrete input type Capture CAP
Logic DI
Safety compliment of STO_A, compliment of STO_B
Sampling duration DI 0.25 ms discrete
0.25 ms
Discrete input voltage 24 V DC capture
24 V DC logic
24 V DC safety
Discrete input logic Positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
Positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1
Positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Response time <= 5 ms compliment of STO_A, compliment of STO_B
Discrete output number 3
Discrete output type Logic DO)24 V DC
Discrete output voltage <= 30 V DC
Discrete output logic Positive or negative DO)EN/IEC 61131-2
Contact bounce time <= 1 ms compliment of STO_A, compliment of STO_B
2 µs CAP
0.25 µs...1.5 ms DI
Braking current 50 mA
Response time on output 250 µs DO)discrete
Control signal type Servo motor encoder feedback
Pulse train output (PTO) RS422 <500 kHz <328.08 ft (100 m)
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <10 kHz <3.3 ft (1 m)
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <200 kHz <32.8 ft (10 m)
Pulse/direction (P/D), A/B, CW/CCW RS422 <1000 kHz <328.08 ft (100 m)
Protection type Against reverse polarity inputs signal
Against short-circuits outputs signal
Safety function STO (safe torque off), Integrated
SS1 (safe stop 1), with separated eSM safety card
SS2 (safe stop 2), with separated eSM safety card
SLS (safe limited speed), with separated eSM safety card
SOS (safe operating stop), with separated eSM safety card
Safety level SIL 3 EN/IEC 61508
PL = e ISO 13849-1
Communication interface Modbus TCP, with separated communication card
CANopen, with separated communication card
CANmotion, with separated communication card
Ethernet/IP, with separated communication card
EtherCAT, with separated communication card
Profibus, with separated communication card
Profinet, with separated communication card
Analog I/O, with separated communication card
Digital I/O, Integrated
Status LED 1 LED (Red) servo drive voltage
Signalling function Display of faults 7 segments
Marking CE
Operating position Vertical +/- 10 degree
Product compatibility Servo motor BSH 2.2 in (55 mm), 1
Width 2.7 in (68 mm)
Height 10.6 in (270 mm)
Depth 9.3 in (237 mm)
Product Weight 3.7 lb(US) (1.7 kg)
Schneider New Stock Image
Schneider LXM32MC10N4 Schneider
€0,00
Sold Out
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM32CD30N4 Schneider
€958,95
Only 7 units left

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 safety, 6 logic discrete inputs and 5 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 10A at 8kHz and a continuous power of 5600W at 400V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 2.6kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

Main

Characteristic Value(s)
Range of Product Lexium 32
Device short name LXM32C
Product or Component Type Motion servo drive
Format of the drive Book
Phase Three phase
[Us] rated supply voltage 200...240 V - 15...10 %
380...480 V - 15...10 %
Supply voltage limits 170…264 V
323…528 V
Supply frequency 50/60 Hz - 5...5 %
Network Frequency 47.5...63 Hz
EMC filter Integrated
Continuous output current 10 A 8 kHz
Output current 3s peak 30 A 208 V 5 s
30 A 480 V 5 s
Continuous power 2800 W 208 V
5600 W 400 V
5600 W 480 V
Nominal power 2 kW 208 V 8 kHz
3 kW 400 V 8 kHz
3 kW 480 V 8 kHz
Line current 9.2 A 59 % 208 V, with external line choke 1 mH
11.1 A 77 % 400 V, with external line choke 1 mH
9.6 A 85 % 480 V, with external line choke 1 mH
9.8 A 128 % 208 V, without line choke
8.3 A 148 % 400 V, without line choke
7 A 152 % 480 V, without line choke

Complementary

Characteristic Value(s)
Switching frequency 8 kHz
Overvoltage category III
Maximum leakage current 30 mA
Output voltage <= power supply voltage
Electrical isolation Between power and control
Type of cable Single-strand IEC cable 122 °F (50 °C)) copper 90 °C XLPE/EPR
Electrical connection Terminal 3 mm², AWG 12 CN8)
Terminal 5 mm², AWG 10 CN1)
Terminal 5 mm², AWG 10 CN10)
Tightening torque CN8 4.4 lbf.in (0.5 N.m)
CN1 6.2 lbf.in (0.7 N.m)
CN10 6.2 lbf.in (0.7 N.m)
Discrete input number 2 safety
6 logic
Discrete input type Logic DI
Safety compliment of STO_A, compliment of STO_B
Sampling duration ANA1+/ANA1-, ANA2+/ANA2- 0.25 ms analog
DI 0.25 ms discrete
Discrete input voltage 24 V DC logic
24 V DC safety
Discrete input logic Positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
Positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1
Positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Response time <= 5 ms compliment of STO_A, compliment of STO_B
Discrete output number 5
Discrete output type Logic DO)24 V DC
Discrete output voltage <= 30 V DC
Discrete output logic Positive or negative DO)EN/IEC 61131-2
Contact bounce time <= 1 ms compliment of STO_A, compliment of STO_B
0.25 µs...1.5 ms DI
Braking current 50 mA
Analogue input number 2
Response time on output 250 µs DO)discrete
Absolute accuracy error < +/- 0.5 %
Linearity error < +/- 0.1 %
Analogue input type ANA1+/ANA1-, ANA2+/ANA2- analog input differential +/- 10 V >= 20 Ohm 14 bits
Control signal type Servo motor encoder feedback
Pulse train output (PTO) RS422 <500 kHz <328.08 ft (100 m)
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <10 kHz <3.3 ft (1 m)
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <200 kHz <32.8 ft (10 m)
Pulse/direction (P/D), A/B, CW/CCW RS422 <1000 kHz <328.08 ft (100 m)
Protection type Against reverse polarity inputs signal
Against short-circuits outputs signal
Safety function STO (safe torque off), Integrated
Safety level SIL 3 EN/IEC 61508
PL = e ISO 13849-1
Communication interface Digital I/O, Integrated
Analog I/O, Integrated
Status LED 1 LED (Red) servo drive voltage
Signalling function Display of faults 7 segments
Marking CE
Operating position Vertical +/- 10 degree
Product compatibility Servo motor BMH 3.9 in (100 mm), 3
Servo motor BMH 5.5 in (140 mm), 1
Servo motor BSH 3.9 in (100 mm), 3
Servo motor BSH 3.9 in (100 mm), 4
Servo motor BSH 5.5 in (140 mm), 1
Width 2.7 in (68 mm)
Height 10.6 in (270 mm)
Depth 9.3 in (237 mm)
Product Weight 5.7 lb(US) (2.6 kg)
Schneider New Stock Image
Schneider LXM32CD12N4 Schneider
€926,95
Only 5 units left

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 safety, 6 logic discrete inputs and 5 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 3A at 8kHz and a continuous power of 1600W at 400V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. It is an IP20 rated product. Its dimensions are 48mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.8kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

Main

Characteristic Value(s)
Range of Product Lexium 32
Device short name LXM32C
Product or Component Type Motion servo drive
Format of the drive Book
Phase Three phase
[Us] rated supply voltage 200...240 V - 15...10 %
380...480 V - 15...10 %
Supply voltage limits 170…264 V
323…528 V
Supply frequency 50/60 Hz - 5...5 %
Network Frequency 47.5...63 Hz
EMC filter Integrated
Continuous output current 3 A 8 kHz
Output current 3s peak 12 A 208 V 5 s
12 A 480 V 5 s
Continuous power 800 W 208 V
1600 W 400 V
1600 W 480 V
Nominal power 0.7 kW 208 V 8 kHz
0.9 kW 400 V 8 kHz
0.9 kW 480 V 8 kHz
Line current 3.1 A 79 % 208 V, with external line choke 2 mH
3.4 A 90 % 400 V, with external line choke 2 mH
2.9 A 98 % 480 V, with external line choke 2 mH
3.6 A 136 % 208 V, without line choke
2.9 A 177 % 400 V, without line choke
2.4 A 182 % 480 V, without line choke

Complementary

Characteristic Value(s)
Switching frequency 8 kHz
Overvoltage category III
Maximum leakage current 30 mA
Output voltage <= power supply voltage
Electrical isolation Between power and control
Type of cable Single-strand IEC cable 122 °F (50 °C)) copper 90 °C XLPE/EPR
Electrical connection Terminal 3 mm², AWG 12 CN8)
Terminal 5 mm², AWG 10 CN1)
Terminal 5 mm², AWG 10 CN10)
Tightening torque CN8 4.4 lbf.in (0.5 N.m)
CN1 6.2 lbf.in (0.7 N.m)
CN10 6.2 lbf.in (0.7 N.m)
Discrete input number 2 safety
6 logic
Discrete input type Logic DI
Safety compliment of STO_A, compliment of STO_B
Sampling duration ANA1+/ANA1-, ANA2+/ANA2- 0.25 ms analog
DI 0.25 ms discrete
Discrete input voltage 24 V DC logic
24 V DC safety
Discrete input logic Positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
Positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1
Positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Response time <= 5 ms compliment of STO_A, compliment of STO_B
Discrete output number 5
Discrete output type Logic DO)24 V DC
Discrete output voltage <= 30 V DC
Discrete output logic Positive or negative DO)EN/IEC 61131-2
Contact bounce time <= 1 ms compliment of STO_A, compliment of STO_B
0.25 µs...1.5 ms DI
Braking current 50 mA
Analogue input number 2
Response time on output 250 µs DO)discrete
Absolute accuracy error < +/- 0.5 %
Linearity error < +/- 0.1 %
Analogue input type ANA1+/ANA1-, ANA2+/ANA2- analog input differential +/- 10 V >= 20 Ohm 14 bits
Control signal type Servo motor encoder feedback
Pulse train output (PTO) RS422 <500 kHz <328.08 ft (100 m)
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <10 kHz <3.3 ft (1 m)
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <200 kHz <32.8 ft (10 m)
Pulse/direction (P/D), A/B, CW/CCW RS422 <1000 kHz <328.08 ft (100 m)
Protection type Against reverse polarity inputs signal
Against short-circuits outputs signal
Safety function STO (safe torque off), Integrated
Safety level SIL 3 EN/IEC 61508
PL = e ISO 13849-1
Communication interface Digital I/O, Integrated
Analog I/O, Integrated
Status LED 1 LED (Red) servo drive voltage
Signalling function Display of faults 7 segments
Marking CE
Operating position Vertical +/- 10 degree
Product compatibility Servo motor BMH 2.8 in (70 mm), 1
Servo motor BMH 2.8 in (70 mm), 2
Servo motor BMH 3.9 in (100 mm), 1
Servo motor BSH 2.8 in (70 mm), 1
Servo motor BSH 2.8 in (70 mm), 2
Width 1.9 in (48 mm)
Height 10.6 in (270 mm)
Depth 9.3 in (237 mm)
Product Weight 4.0 lb(US) (1.8 kg)
Schneider New Stock Image
Schneider LXM32AU45M2 Schneider
€1.290,95
Only 3 units left

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 1 capture, 2 safety, 4 logic discrete inputs and 2 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V (single phase), a continuous output current of 1.5A at 8kHz and a continuous power of 500W at 230V. It is furnished with terminal for electrical connection and three RJ45 connectors for CANmotion, CANopen, and Modbus, integrated communication interfaces. It is an IP20 rated product. Its dimensions are 48mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.6kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motor BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

Main

Characteristic Value(s)
Range of Product Lexium 32
Device short name LXM32A
Product or Component Type Motion servo drive
Format of the drive Book
Phase Single phase
[Us] rated supply voltage 100...120 V - 15...10 %
200...240 V - 15...10 %
Supply voltage limits 85…132 V
170…264 V
Supply frequency 50/60 Hz - 5...5 %
Network Frequency 47.5...63 Hz
EMC filter Integrated
Continuous output current 1.5 A 8 kHz
Output current 3s peak 3 A 115 V 5 s
4.5 A 230 V 5 s
Continuous power 200 W 115 V
500 W 230 V
Nominal power 0.15 kW 115 V 8 kHz
0.3 kW 230 V 8 kHz
Line current 2.6 A 85 % 115 V, with external line choke 5 mH
3.4 A 100 % 230 V, with external line choke 5 mH
2.9 A 173 % 115 V, without line choke
2.9 A 181 % 230 V, without line choke

Complementary

Characteristic Value(s)
Switching frequency 8 kHz
Overvoltage category III
Maximum leakage current 30 mA
Output voltage <= power supply voltage
Electrical isolation Between power and control
Type of cable Single-strand IEC cable 122 °F (50 °C)) copper 90 °C XLPE/EPR
Electrical connection Terminal 3 mm², AWG 12 CN8)
Terminal 5 mm², AWG 10 CN1)
Terminal 5 mm², AWG 10 CN10)
Tightening torque CN8 4.4 lbf.in (0.5 N.m)
CN1 6.2 lbf.in (0.7 N.m)
CN10 6.2 lbf.in (0.7 N.m)
Discrete input number 1 capture
2 safety
4 logic
Discrete input type Capture CAP
Logic DI
Safety compliment of STO_A, compliment of STO_B
Sampling duration DI 0.25 ms discrete
Discrete input voltage 24 V DC capture
24 V DC logic
24 V DC safety
Discrete input logic Positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
Positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1
Positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Response time <= 5 ms compliment of STO_A, compliment of STO_B
Discrete output number 2
Discrete output type Logic DO)24 V DC
Discrete output voltage <= 30 V DC
Discrete output logic Positive or negative DO)EN/IEC 61131-2
Contact bounce time <= 1 ms compliment of STO_A, compliment of STO_B
2 µs CAP
0.25 µs...1.5 ms DI
Braking current 50 mA
Response time on output 250 µs DO)discrete
Control signal type Servo motor encoder feedback
Protection type Against reverse polarity inputs signal
Against short-circuits outputs signal
Safety function STO (safe torque off), Integrated
Safety level SIL 3 EN/IEC 61508
PL = e ISO 13849-1
Communication interface CANmotion, Integrated
CANopen, Integrated
Connector type RJ45 (labelled CN4 or CN5) CANmotion
RJ45 (labelled CN4 or CN5) CANopen
Method of access Slave
Transmission rate 1 Mbps 13.1 ft (4 m) CANopen, CANmotion
125 kbps 1640.4 ft (500 m) CANopen, CANmotion
250 kbps 820.2 ft (250 m) CANopen, CANmotion
50 kbps 3280.8 ft (1000 m) CANopen, CANmotion
500 kbps 328.08 ft (100 m) CANopen, CANmotion
Number of addresses 1…127 CANopen, CANmotion
Communication service 1 receive SDO CANmotion
1 transmit SDO CANmotion
2 PDOs conforming to DSP 402 CANmotion
2 SDOs receive CANopen
2 SDOs send CANopen
4 configurable mapping PDOs CANopen
CANopen device profile drives and motion control CANopen, CANmotion
Emergency CANopen, CANmotion
Event-triggered, time-triggered, remotely requested,sync (cyclic), sync(acyclic) CANopen
Node guarding, heartbeat CANopen
Position control mode CANmotion
Position control, speed profile, torque profile and homing mode CANopen
Sync CANmotion
Status LED 1 LED (Red) servo drive voltage
1 LED error
1 LED RUN
Signalling function Display of faults 7 segments
Marking CE
Operating position Vertical +/- 10 degree
Product compatibility Servo motor BSH 2.2 in (55 mm), 1
Width 1.9 in (48 mm)
Height 10.6 in (270 mm)
Depth 9.3 in (237 mm)
Product Weight 3.5 lb(US) (1.6 kg)
Schneider New Stock Image
Schneider LXM32AD30M2 Schneider
€986,95
Only 6 units left
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM32AD18M2 Schneider
€501,95
Only 9 units left
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM28SU02M3X Schneider
€0,00
Sold Out
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM28SU07M3X Schneider
€771,95
Only 6 units left

This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features an HMI interface 7-segment display with 5 buttons. Thanks to its open communication concept, Lexium 28 servo drive can be easily integrated into numerous different control system architectures. The motion servo drives embed one pulse-train-input PTI and one pulse train-output PTO interfaces. It is a motion servo drive with a rated supply voltage of 220V (single phase and three phase), an output current of 4.5A at 220V, a power of 750W/1.00HP and a continuous power of 750W at 220V. It is furnished with spring terminal for electrical connection and RJ45 connectors for Sercos integrated communication interface. It is an IP20 rated product. Its dimensions are 55mm (Width) x 146mm (Depth) x 150mm (Height). It weighs 1kg. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with motor BCH2 (130mm, 1 motor stacks) at 500W, BCH2 (80mm, 2 motor stacks) at 750W, BCH2 (130mm, 1 motor stacks) at 600W. Mount this servo drive in a vertical position (more or less 10°). This is required for cooling the device. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 motors, optimized servo bundles for compact machines.

Main

Characteristic Value(s)
Range of Product Lexium 28
Device short name LXM28S
Product or Component Type Motion servo drive
Format of the drive Compact housing
Line current 6 A 181.8 % 220 V, single phase
6 A 160.6 % 220 V, three phase

Complementary

Characteristic Value(s)
Phase Single phase
Three phase
[Us] rated supply voltage 200...240 V - 10...15 %)three phase
200...240 V - 20...15 %)single phase
Supply voltage limits 200…255 V three phase
170…255 V single phase
Supply frequency 50/60 Hz - 5...5 %
Network Frequency 47.5...63 Hz
EMC filter Without EMC filter
Continuous output current 4.5 A 16 kHz
Output current 3s peak 13.5 A 220 V
Continuous power 750 W 220 V
Nominal power 0.75 kW 220 V 16 kHz
Switching frequency 16 kHz
Overvoltage category III
Maximum leakage current 1.3 mA
Output voltage <= power supply voltage
Electrical isolation Between power and control
Type of cable Shielded motor cable 32…131 °F (0…55 °C)) copper
Electrical connection Spring terminal 0.82...1 mm², AWG 18 L1-L2)
Spring terminal 0.82...1 mm², AWG 18 R, S, T)
Spring terminal 0.82...1 mm², AWG 18 U, V, W, PE)
Spring terminal 0.82...1 mm², AWG 18 PA/+, PBe)
Discrete input number 8 programmable CN1)
2 fast capture CN1)
1 safety function STO CN9)
Discrete input voltage 24 V DC logic
Discrete input logic Positive or negative CN1)
Discrete output number 4 logic output CN1)12...24 V DC
1 pulse train output (PTO) CN1)
Discrete output voltage 12...24 V DC
Discrete output logic Positive or negative CN1)
Control signal type Servo motor encoder feedback CN2
Protection type Against reverse polarity inputs signal
Against short-circuits outputs signal
Overcurrent motor
Overvoltage motor
Undervoltage motor
Overheating motor
Overload motor
Overspeed motor
Safety function STO (safe torque off), Integrated
Safety level SIL 2 IEC 61800-5-2 2007
SIL 2 IEC 61508-1 2010
PL d/category 3 ISO 13849-1 2008
SIL 2 ISO 13849-1 2009/AC
SIL 2 IEC 60204-1 2006
SIL 2 IEC 60204-1 2009/A1
SIL 2 IEC 60204-1 2010/AC
SIL 2 IEC 62061 2012
Communication interface Modbus, Integrated
SERCOS III, Integrated
Connector type RJ45 CN3)
RJ45 CN4)
Method of access Slave
Transmission rate 9600 bauds...115200 bauds (automatic detection) 328.08 ft (100 m)
Status LED 1 LED (Red) charge
1 LED (Green) RUN
1 LED (Red) error
Signalling function Servo status and fault codes five 7-segment display units
Marking CSA
CULus
CE
type of cooling Integrated fan
Operating position Vertical
Product compatibility Servo motor BCH2 5.1 in (130 mm), 1 500 W
Servo motor BCH2 3.1 in (80 mm), 2 750 W
Servo motor BCH2 5.1 in (130 mm), 1 600 W
Width 2.2 in (55 mm)
Height 5.9 in (150 mm)
Depth 5.7 in (146 mm)
Product Weight 2.2 lb(US) (1 kg)
Supply voltage description Three phase 220 V AC 50...60 Hz
Single phase 220 V AC 50...60 Hz
Network number of phases 3
1
Drive voltage drop coefficient 1
Field weakening False
Continuous output current 2 4.5 A
Output current 3s peak 2 13.5 A 220 V
Switching frequency 2 16 kHz
Continuous output current 3 4.5 A
Output current 3s peak 3 13.5 A 220 V
Switching frequency 3 16 kHz
communication interface Pulse train output
SERCOS III
Emc filter compatibility Type 022
Type 020
Schneider New Stock Image
Schneider LXM28EUA5M3X Schneider
€0,00
Sold Out

Main

Characteristic Value(s)
Range of Product Lexium 28
Device short name LXM28E
Product or Component Type Motion servo drive
Format of the drive Compact housing
Line current 0.8 A 262.8 % 220 V, single phase
0.8 A 227 % 220 V, three phase

Complementary

Characteristic Value(s)
Phase Three phase
Single phase
[Us] rated supply voltage 200...240 V - 10...15 %)three phase
200...240 V - 20...15 %)single phase
Supply voltage limits 200…255 V three phase
170…255 V single phase
Supply frequency 50/60 Hz - 5...5 %
Network Frequency 47.5...63 Hz
EMC filter Without EMC filter
Continuous output current 0.64 A 16 kHz
Output current 3s peak 2 A 220 V
Continuous power 50 W 220 V
Nominal power 0.05 kW 220 V 16 kHz
Switching frequency 16 kHz
Overvoltage category III
Maximum leakage current 1.3 mA
Output voltage <= power supply voltage
Electrical isolation Between power and control
Type of cable Shielded motor cable 32…131 °F (0…55 °C)) copper
Electrical connection Spring terminal 0.82...1 mm², AWG 18 L1-L2)
Spring terminal 0.82...1 mm², AWG 18 R, S, T)
Spring terminal 0.82...1 mm², AWG 18 U, V, W, PE)
Spring terminal 0.82...1 mm², AWG 18 PA/+, PBe)
Discrete input number 8 programmable CN1)
2 fast capture CN1)
1 safety function STO CN9)
Discrete input voltage 24 V DC logic
Discrete input logic Positive or negative CN1)
Discrete output number 5 logic output CN1)12...24 V DC
1 pulse train output (PTO) CN1)
Discrete output voltage 12...24 V DC
Discrete output logic Positive or negative CN1)
Control signal type Servo motor encoder feedback CN2
Protection type Against reverse polarity inputs signal
Against short-circuits outputs signal
Overcurrent motor
Overvoltage motor
Undervoltage motor
Overheating motor
Overload motor
Overspeed motor
Safety function STO (safe torque off), Integrated
Safety level SIL 2 IEC 61800-5-2 2007
SIL 2 IEC 61508-1 2010
PL d/category 3 ISO 13849-1 2008
SIL 2 ISO 13849-1 2009/AC
SIL 2 IEC 60204-1 2006
SIL 2 IEC 60204-1 2009/A1
SIL 2 IEC 60204-1 2010/AC
SIL 2 IEC 62061 2012
Communication interface EtherCAT, Integrated
Connector type RJ45 CN4)EtherCAT
Method of access Slave
Transmission rate 100 Mbit/s EtherCAT
Physical interface RS485 Modbus Serial line slave
Status LED 1 LED (Red) DC bus energized
1 LED (multi-colour) N.RUN
1 LED (multi-colour) N.ERR
2 LEDs (Yellow) Link (Link Status)
2 LEDs (Yellow) activity
Signalling function Servo status and fault codes five 7-segment display units
Marking CULus
CE
CSA
type of cooling Natural convection
Operating position Vertical
Product compatibility Servo motor BCH2 1.6 in (40 mm), 1 50 W
Width 2.2 in (55 mm)
Height 5.9 in (150 mm)
Depth 5.7 in (146 mm)
Product Weight 2.2 lb(US) (1 kg)
Supply voltage description Single phase 220 V AC 50...60 Hz
Three phase 220 V AC 50...60 Hz
Network number of phases 1
3
Drive voltage drop coefficient 1
Field weakening False
Continuous output current 2 0.64 A
Output current 3s peak 2 2 A 220 V
Switching frequency 2 16 kHz
Continuous output current 3 0.64 A
Output current 3s peak 3 2 A 220 V
Switching frequency 3 16 kHz
Communication interface Pulse train output
EtherCAT
Emc filter compatibility Type 020
Type 022
Schneider New Stock Image
Schneider LXM28EU07M1X Schneider
€528,95
Only 1 unit left
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Schneider New Stock Image
Schneider LXM28AUA5M1X Schneider
€541,95
Only 1 unit left
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Recently viewed