Omron

Specialty Controllers NX I/O EtherCAT Coupler - 10A

Controllers NX I/O ECat Cpler 10A

I/O Modules NX 16Pt 12-24VDC PNP Trans Out

Sysmac NX1P CPU with 24 Digital Transistor I/O (PNP) 1.5 MB memory EtherCAT (0 servo axes 4 PTP axes 16 EtherCAT nodes) EtherNet/IP and 1 serial option port

Analog I/O unit, 4 x inputs -10 to 10 V, 0 to 5 V, 0 to 10 V, 1 to 5 V, 4 to 20 mA, 2 x outputs -10 to 10 V, 0 to 5 V, 0 to 10 V, 1 to 5 V, 4 to 20 mA, resolution 1:4000 scalable to ±32000 or 1:8000, screw terminal

EtherNet I/P module, STP (shielded twisted-pair) cable of category 5, 5e, or higher, tag data link message service communications, 1 unit numbers word, 410 mA 5/DC

Industrial Relays NX Safety 4out 0.5A

Digital output unit 16 x relay outputs 250 VAC/24 VDC 2 A max screw terminal

CPU with built-in EtherNet/IP port, 10K steps program, 32K words data memory, 32K words x 1 bank EM, 2560 I/O max, option port for RS-232C/485, USB programming port, 3 expansion racks max

Analog input unit, 8 x inputs 1 to 5 V, 0 to 5 V, 0 to 10 V, -10 to 10 V, 4 to 20 mA, resolution 1:4000 / 8000, screw terminal

Touch screen HMI, 8.4 inch, TFT, 256 colors (32,768 colors for .BMP/.JPG), 640x480 pixels, 2 x RS-232C ports, 60MByte memory, 24 VDC, black case

Industrial Relays NX Safety 8IN Standard

Sysmac NJ3 CPU 5MB memory built-in EtherCAT (4 servo axes in total 192 EtherCAT nodes) and EtherNet/IP

Power supply unit, 100-240 VAC, output capacity: 14 W

CP2E series compact PLC - Network type; 24 DI, 16 DO; Relay output; Power supply 24 VDC; 10 kStep Program memory

CPU with built-in EtherNet/IP port, 60K steps program, 32K words data memory, 32K words x 4 banks EM, 2560 I/O max, option port for RS-232C/485, USB programming port, 3 expansion racks max.

CPU with built-in EtherNet/IP port, 20K steps program, 32K words data memory, 32K words x 1 bank EM, 2560 I/O max, option port for RS-232C/485, USB programming port, 3 expansion racks max.

Digital input unit, 16 x 24 VDC inputs, screw terminal

Power supply unit, 100-240 VAC, output capacity: 25 W, with RUN output

NS Series, NS10-V2 Programmable Terminal, 10.4 inch high definition TFT color LCD, 256 display colors, 640 x 480 dots, built-in Ethernet, Black case, 24 VDC, 20.4 – 27.6 VDC voltage range, 25 W max

Controllers NX 16Pt, 24 VDC PNP Input

I/O Unit, digital input module, 64-point, Fujitsu connection, 4.1 mA at 24/DC

Expansion I/O interface unit connects to left hand side of expansion I/O rack up to 3 expansion racks

Relay Sockets & Fixings Ethernet Adapter Enhanced