1 year warranty
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
set of 12 spring connectors 5 pins Ti24
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Acti 9 Smartlink |
| Range | Acti9 |
| Product or component type | Single-end prefabricated cable |
| Accessory / separate part category | Connection accessory |
| Range compatibility | Acti 9 Acti9 Smartlink circuit breaker |
| Device short name | prefabricated cables XL |
| Quantity per set | 1 |
| Type of cable | Ribbon cable 4 m, black |
Complementary
| Characteristic | Value(s) |
|---|---|
| Market segment | Residential Small commercial |
| Compatibility code | Prefabricated cables XL |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Acti 9 Smartlink |
| Range | Acti9 |
| Product or component type | Both-end prefabricated cable |
| Accessory / separate part category | Connection accessory |
| Range compatibility | Acti 9 Acti9 Smartlink circuit breaker |
| Device short name | prefabricated cables H |
| Quantity per set | 6 |
| Type of cable | Ribbon cable 0.45 m, black |
Complementary
| Characteristic | Value(s) |
|---|---|
| Market segment | Small commercial Residential |
| Compatibility code | Prefabricated cables H |
both-end prefabricated cables 870 mm size 5 wires
both-end prefabricated cables 160 mm 5 wires
both-end prefabricated cables 100 mm 5 wires
This is a cable used for management and Modbus firmware update. dedicated to connection for Acti 9 Smartlink.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Acti 9 Smartlink |
| Range | Acti9 |
| Product or component type | Testing cable |
| Accessory / separate part category | Connection accessory |
| Range compatibility | Acti 9 Acti9 Smartlink circuit breaker |
| Device short name | cable test Acti 9 Smartlink |
| Quantity per set | 1 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Market segment | Residential Small commercial |
| Compatibility code | Cable test Acti 9 Smartlink |
This is a set of 6 long prefabricated cables 870mm with 1 connector. dedicated to connection for Acti 9 Smartlink.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Acti 9 Smartlink |
| Range | Acti9 |
| Product or component type | Single-end prefabricated cable |
| Accessory / separate part category | Connection accessory |
| Range compatibility | Acti 9 Acti9 Smartlink circuit breaker |
| Device short name | prefabricated cables U |
| Quantity per set | 6 |
| Type of cable | Ribbon cable 0.85 m, black |
Complementary
| Characteristic | Value(s) |
|---|---|
| Market segment | Residential Small commercial |
| Compatibility code | Prefabricated cables U |
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| Product or component type | Mounting kit |
| Device short name | mounting kit for multiclip 200 |
| Accessory / separate part category | Mounting accessory |
| Quantity per set | 1 kit |
| Market segment | Small commercial Residential |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range compatibility | Acti 9 Acti9 Smartlink |
| Kit composition | 4 x adaptor |
| Compatibility code | Mounting kit for multiclip 200 |
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| Product or component type | Mounting kit |
| Device short name | mounting kit for back panel |
| Accessory / separate part category | Mounting accessory |
| Colour | Black (RAL 7016) |
| Quantity per set | 1 kit |
Complementary
| Characteristic | Value(s) |
|---|---|
| Localisation on device | Back |
| Mounting location | Back to back |
| Range compatibility | Acti 9 Acti9 Smartlink |
| Kit composition | 2 x PA6 bracket 2 x steel screws and bolts for mounting |
| Compatibility code | Mounting kit for back panel |
This PowerTag Control IO 230V is a wireless-communication input and output module. It is designed specifically for Control and monitoring applications. It is designed to monitor a circuit, notifying wireless to the concentrator the information status of a contract It has to be associated with a concentrator PowerTag Link or a Wiser IP module. This product can be installed in new or existing panels with simple commissioning operation. It has a status LED who provides information about PowerTag Control status. It is mounted on DIN rail and is compatible with horizontal comb busbars 9 mm modules. The Un Rated voltage is Phase-to-neutral 230VAC +/- 20%. The maximum consumption is below or equal to 2VA. The degree of protection is IP20 for casing and IP40 for front face. The operating temperature is between -25°C to +60°C. The storage temperature is between 40°C to +85°C. The dimensions are (W) 18mm x (H) 85mm x (D) 62mm. This product complies with IEC 60529 standard
Main
| Characteristic | Value(s) |
|---|---|
| Range | PowerTag |
| Product or component type | Input and ouput module |
| Device short name | PowerTag C IO 230V |
| product name | PowerTag Control |
| Concentrator compatibility | Acti9 PowerTag Link C Wiser IP module Acti9 PowerTag Link Acti9 PowerTag Link HD |
| Range compatibility | Acti9 impulse relay Acti9 contactor Acti9 iACTs remote indication auxiliary Acti9 iATLs remote indication auxiliary |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Us] rated supply voltage | 230 V AC (+/- 20 %) |
| Network frequency | 50/60 Hz |
| Power consumption in VA | 2 VA |
| digital input number | 1 |
| Input type | Dry contact 230 V AC 2 mA |
| Voltage state 1 guaranteed | >= 164 V for digital input |
| Voltage state 0 guaranteed | <= 40 V for digital input |
| Current state 1 guaranteed | >= 2 mA (digital input) |
| Current state 0 guaranteed | <= 0.5 mA (digital input) |
| Digital output number | 1 |
| Output type | Dry contact 230 V 0.01...2 A AC |
| Discrete output type | Configurable relay logic |
| Output function | NO/NC programmable |
| Mechanical durability | 100000 cycles for output |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Local signalling | Green, orange and red LED for product status |
| Impulse duration | 300 ms by default - 0 ms, + 300 ms |
| Time between 2 impulse | 100 ms minimum - tolerance: - 0 ms, + 300 ms |
| Colour | White (RAL 9003) |
| 9 mm pitches | 2 |
| Height | 85 mm |
| Material | PA6 GF30 |
| Width | 18 mm |
| Depth | 62 mm |
| Product weight | 80 g |
| Connections - terminals | Tunnel type terminals (top) - 1 cable(s) 1â¦16 mm² (AWG 18...AWG 16) - rigid Tunnel type terminals (top) - 1 cable(s) 0.5â¦10 mm² (AWG 21...AWG 8) - flexible Tunnel type terminals (bottom) - 1 cable(s) 1â¦6 mm² (AWG 18...AWG 10) - rigid Tunnel type terminals (bottom) - 1 cable(s) 0.5â¦4 mm² (AWG 21...AWG 12) - flexible Tunnel type terminals (bottom) - 1 cable(s) 0.5â¦4 mm² (AWG 21...AWG 12) - flexible with ferrule Tunnel type terminals (bottom) - 2 cable(s) 1.5â¦2.5 mm² (AWG 16...AWG 14) - rigid Tunnel type terminals (bottom) - 2 cable(s) 1.5â¦2.5 mm² (AWG 16...AWG 14) - flexible |
| Wire stripping length | 14 mm for top connection 9 mm for bottom connection |
| Tightening torque | Power supply: 2 N.m top Digital input/output: 1 N.m bottom |
| Standards | EN/IEC 61010-1 ETSI EN 300 328 EN/IEC 62479 ETSI EN 301 489-17 ETSI EN 301 489-1 EN/IEC 61010-2-201 EN/IEC 61326-1 |
This PowerTag Control 2DI 230V is a wireless-communication input module. It is designed specifically for monitoring applications. It is designed to monitor a circuit, notifying wireless to the concentrator the information status of a contract It has to be associated with a concentrator PowerTag Link. This product can be installed in new or existing panels with simple commissioning operation. It has a status LED who provides information about PowerTag Control status. It is mounted on DIN rail and is compatible with horizontal comb busbars 9 mm modules. The Un Rated voltage is Phase-to-neutral 230VAC +/- 20%. The maximum consumption is below or equal to 3VA. The degree of protection is IP20 for casing and IP40 for front face. The operating temperature is between -25°C to +60°C. The storage temperature is between 40°C to +85°C. The dimensions are (W) 18mm x (H) 85mm x (D) 62mm. This product complies with IEC 60529 standard
Main
| Characteristic | Value(s) |
|---|---|
| Range | PowerTag |
| Product or component type | Input module |
| Device short name | PowerTag C 2DI 230V |
| product name | PowerTag Control |
| Concentrator compatibility | Acti9 PowerTag Link Acti9 PowerTag Link HD |
| Range compatibility | Acti9 OF and SD double OC or fault contact |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Us] rated supply voltage | 230 V AC (+/- 20 %) |
| Network frequency | 50/60 Hz |
| Power consumption in VA | 3 VA |
| digital input number | 2 |
| Input type | Dry contact 230 V AC 2 mA |
| Voltage state 1 guaranteed | >= 164 V for digital input |
| Voltage state 0 guaranteed | <= 40 V for digital input |
| Current state 1 guaranteed | >= 2 mA (digital input) |
| Current state 0 guaranteed | <= 0.5 mA (digital input) |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Local signalling | Green, orange and red LED for product status |
| Switching frequency | 10 Hz maximum |
| Colour | White (RAL 9003) |
| 9 mm pitches | 2 |
| Height | 85 mm |
| Material | PA6 GF30 |
| Width | 18 mm |
| Depth | 62 mm |
| Product weight | 75 g |
| Connections - terminals | Tunnel type terminals (top) - 1 cable(s) 1â¦16 mm² (AWG 18...AWG 16) - rigid Tunnel type terminals (top) - 1 cable(s) 0.5â¦10 mm² (AWG 21...AWG 8) - flexible Tunnel type terminals (bottom) - 1 cable(s) 1â¦6 mm² (AWG 18...AWG 10) - rigid Tunnel type terminals (bottom) - 1 cable(s) 0.5â¦4 mm² (AWG 21...AWG 12) - flexible Tunnel type terminals (bottom) - 1 cable(s) 0.5â¦4 mm² (AWG 21...AWG 12) - flexible with ferrule Tunnel type terminals (bottom) - 2 cable(s) 1.5â¦2.5 mm² (AWG 16...AWG 14) - rigid Tunnel type terminals (bottom) - 2 cable(s) 1.5â¦2.5 mm² (AWG 16...AWG 14) - flexible |
| Wire stripping length | 14 mm for top connection 9 mm for bottom connection |
| Tightening torque | Power supply: 2 N.m top Digital input: 1 N.m bottom |
| Standards | ETSI EN 300 328 ETSI EN 301 489-1 EN/IEC 61326-1 ETSI EN 301 489-17 EN/IEC 61010-1 EN/IEC 62479 EN/IEC 61010-2-201 |
Acti 9 - mounting kit for Smartlink on DIN rail
This Acti 9 SmartLink Modbus Slave is a smart communication module with 11 channels. It communicates with the auxiliaries iACT24 for iCT contactors, iATL24 for iTL impulse relays, iOF+SD24 for iC60, iID, ARA, RCA & iSW-NA. It needs to be associated to a Master SmartLink SI B thanks to the Modbus RS485 connector. It is used to transfer data from Acti 9 devices to a PLC or network monitoring system thanks to the Ethernet connector. It communicates also with OF+SD24 for C60, C120, DPN, ID & C60H-DC, Ti24 for RCA iC60 & Reflex iC60. It is supplied with 1 power supply connector 24VDC, 2 bolts for mounting on Linergy FM80. The link is Modbus, RTU, RS485 serial connection. The transfer rate is self-adaptable from 9600 to 19200 baud. The Modbus addresing range is 1 to 99. It is a 4-pin connector type of bus. It is a plug-in connection. The maximum length of the bus is 1000m. The maximum cable length is 500m. The voltage power supply is 24VDC +/- 10%. The Maximum input current is 1,5A. The Maximum inrush current is 3A. The degree of protection is IP20. The pollution degree is 3. It complies with RoHS directive. The duration of saving memory is 10 years. The dimensions are (W) 359mm x (H) 23mm x (D) 42mm. The weigth is 195g. The operating temperature is -25°C to + 60°C and only +50°C if vertical mouting. The storage temperature is -40°C to + 80°C. This product complies with IEC/EN 61131-2 standard.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Acti9 |
| range of product | EcoStruxure |
| Product or component type | Smart communication module |
| product name | EcoStruxure I/O Smart Link |
| Device short name | I/O Smart Link |
| Application type | Load control Breaker status monitoring Basic energy metering E |
| Number max of connected devices | Up to 11 wired devices |
| Group of channels | 1 group of 11 digital channels |
| Maximum supply current | 1.5 A |
| [Us] rated supply voltage | 24 V DC +/- 20 % |
| connectivity to devices | Digital input and output Pulse output meter |
| Communication service | Modbus server for RS485 |
| Web server | BMS controller compatible |
Complementary
| Characteristic | Value(s) |
|---|---|
| Application specific I/O | Pulse totalising counter Pulse converter |
| Protection type | Against reverse polarity for auxiliary supply Against reverse polarity for input Overvoltage at 33 V DC for digital output |
| Immunity to microbreaks | 10 ms |
| Reset | Factory reset on front face By booted push-button By address encoder By plug in, plug out the power supply |
| Input/output type | 2 inputs + 1 output per digital channel |
| Input type | Current sink for digital input, 24 V DC +/- 20 % at 2.5 mA |
| Maximum permanent current | 5 mA for digital input |
| Electronic filtering time | 2 ms for digital input from state 0 to state 1 |
| Output type | Logic current source: 24 V - DC - 100 mA |
| Maximum voltage drop | <1 V at state 1 digital output |
| Inrush current | 0.5 A for digital output 7 A for power supply |
| Local signalling | Communication: 1 LED (yellow) Status: 1 LED (green, orange and red) |
| Type of setting | Modbus address 01...99 for address encoders Reset for address encoders Reset for plug in, plug out the auxiliary supply |
| Mounting position | Horizontal and vertical on DIN rail |
| Colour | White (RAL 9003) |
| Location of connection | Front |
| Connections - terminals | Spring-loaded terminal Ti24 qty: 11 for digital input/output, ordered separately Plug-in connector qty: 1 for supply circuit Plug-in connector qty: 1 for communication bus |
| Clamping connection capacity | 2 x 0.2...2 x 1.5 mm² for twisted shielded pairs cable, flexible with cable end for communication bus 2 x 0.2...2 x 1.5 mm² for twisted shielded pairs cable, flexible without cable end for communication bus 2 x 0.2...2 x 1.5 mm² for twisted shielded pairs cable, rigid with cable end for communication bus 2 x 0.2...2 x 1.5 mm² for twisted shielded pairs cable, rigid without cable end for communication bus 1 x 0.2...1 x 1.5 mm², flexible with cable end for control 1 x 0.2...1 x 1.5 mm², flexible without cable end for control 1 x 0.2...1 x 1.5 mm², rigid with cable end for control 1 x 0.2...1 x 1.5 mm², rigid without cable end for control 2 x 0.2...2 x 1.5 mm², flexible with cable end for supply circuit 2 x 0.2...2 x 1.5 mm², flexible without cable end for supply circuit 2 x 0.2...2 x 1.5 mm², rigid with cable end for supply circuit 2 x 0.2...2 x 1.5 mm², rigid without cable end for supply circuit |
| Wire stripping length | Control: 10 mm Supply circuit: 7 mm Communication bus: 7 mm |
| Communication network type | RS485 Modbus RTU client/server SUB-D 9 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps |
| 9 mm pitches | 0 useful |
| Height | 22.5 mm |
| Width | 359 mm |
| Depth | 42 mm |
| Product weight | 188 g |
| Provided equipment | Set of 1 bus connector Set of 1 power supply connector Set of 2 locking clips |
| Range compatibility | Acti 9 iTL auxiliary Linergy Linergy FM Acti 9 iOF+SD 24 Acti 9 iACT24 Acti 9 iATL24 PowerLogic pulse output meter Acti 9 RCA iC60 Acti 9 Acti9 iCT auxiliary Acti 9 Acti9 iC60 Acti 9 Acti9 iID Acti 9 Acti9 iSW-NA Acti 9 Acti9 iDPN Vigi Acti 9 Acti9 C40 Multi9 Multi9 C60 Acti 9 Acti9 DT40 Acti 9 Acti9 DT60 Acti 9 Acti9 I-NA Acti 9 Acti9 ITG40 Acti 9 Acti9 iDPN Acti 9 Acti9 Reflex iC60 Ti24 connector |
| Commissioning interface | EcoStruxure Power Commission |
| Market segment | Buildings Small commercial |
| Compatibility code | Acti 9 Smartlink |
This Acti 9 PowerTag Link HD is a Wireless to Modbus TCP/IP Concentrator smart communication module. It has to be associated with a PowerTag wireless-communication energy sensor to provide circuit monitoring and diagnosis down to load level. The number of HW-interfaces industrial Ethernet is 1. Number of HW-interfaces Wireless is 1. The voltage power supply is 110VAC to 230VAC. The operating frequency is 50Hz or 60Hz. It is a screw connection. The degree of protection is IP20 or IP40 for modular enclosure. The pollution degree is 2. It complies with RoHS directive. The dimensions are (W) 54mm x (H) 85mm x (D) 67.5mm. The operating temperature is -25°C to + 60°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 61131-2 standard.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| Product or component type | Smart communication module |
| product name | Acti9 PowerTag Link HD |
| Device short name | PowerTag Link HD |
| Application type | Basic energy metering E Improved load monitoring E, U, I, P, Pf Load alarming |
| Number max of connected devices | Up to 100 wireless devices |
| Maximum supply current | 2 A |
| [Us] rated supply voltage | 110...230 V AC +/- 15 % |
| connectivity to devices | Wireless energy sensor |
| Communication service | Ethernet Modbus TCP/IP server Web server |
| Web server | Embedded web page BMS controller compatible |
| Transmission support medium | Radio frequency 2.4â¦2.4835 GHz PowerTag 100 |
| Web services | Web page |
Complementary
| Characteristic | Value(s) |
|---|---|
| Application specific I/O | Pulse totalising counter |
| Power consumption in VA | 5 VA |
| Immunity to microbreaks | 10 ms |
| Reset | Factory reset on front face |
| Local signalling | Product status: 1 LED (green, orange and red) Ethernet status (LAN ST): 1 LED (green, orange and red) |
| Mounting position | Horizontal/vertical on DIN rail |
| Colour | White (RAL 9003) |
| Location of connection | Upstream |
| Overvoltage category | III |
| 9 mm pitches | 6 useful |
| Height | 85 mm |
| Width | 54 mm |
| Depth | 67.5 mm |
| Product weight | 133 g |
| Range compatibility | Acti 9 PowerTag wireless energy sensor |
| Commissioning interface | Web page ECOREACH |
| Compatibility code | Acti9 PowerTag Link HD |
Acti9 PowerTag Link - Wireless to Modbus TCP/IP Concentrator