1 year warranty
switch disconnector iSW - 3P - 100 A - 415 V
This Acti9 iSW is a modular and reliable switch disconnector. it is a 3P, rated current is 125A, and operating voltage is 415VAC. Electrical endurance goes up to 2500 cycles, and Mechanical endurance goes up to 20000 cycles. The operating temperature is -25°C to +60°C. The storage temperature is -40°C to +85°C. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. The width in 9mm pitches is 6. The dimensions are (W) 54mm x (H) 85mm x (D) 73mm. This switch disconnector is used for control and isolation. This product is compliant with EN/IEC 60947-3.
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iSW |
| Product or component type | Switch disconnector |
| Device short name | iSW |
| Device application | Control Isolation |
| Poles description | 3P |
| Utilisation category | AC-22A |
| Suitability for isolation | Yes |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 125 A at 415 V AC 50/60 Hz |
| [Ue] rated operational voltage | 415 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 1500 A |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz |
| [Uimp] rated impulse withstand voltage | 6 kV |
| control type | Toggle |
| Local signalling | ON/OFF indication |
| Contact position indicator | Yes |
| Mounting mode | Fixed |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 6 |
| Height | 85 mm |
| Width | 54 mm |
| Depth | 73 mm |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 2500 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) - <= 1 x 50 mm² - rigid Tunnel type terminals (top or bottom) - <= 1 x 35 mm² - flexible Tunnel type terminals (top or bottom) - <= 1 x 35 mm² - flexible with ferrule |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
This Acti9 iSW is a modular and reliable switch disconnector. it is a 4P, rated current is 40A, and operating voltage is 415VAC. Electrical endurance goes up to 15000 cycles, and Mechanical endurance goes up to 20000 cycles. The operating temperature is -25°C to +60°C. The storage temperature is -40°C to +85°C. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. The width in 9mm pitches is 8. The dimensions are (W) 72mm x (H) 85mm x (D) 73mm. This switch disconnector is used for control and isolation. This product is compliant with EN/IEC 60947-3.
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iSW |
| Product or component type | Switch disconnector |
| Device short name | iSW |
| Device application | Isolation Control |
| Poles description | 4P |
| Utilisation category | AC-22A |
| Suitability for isolation | Yes |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 40 A at 415 V AC 50/60 Hz |
| [Ue] rated operational voltage | 415 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 1260 A |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz |
| [Uimp] rated impulse withstand voltage | 6 kV |
| control type | Toggle |
| Local signalling | ON/OFF indication |
| Contact position indicator | Yes |
| Mounting mode | Fixed |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 8 |
| Height | 85 mm |
| Width | 72 mm |
| Depth | 73 mm |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 15000 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) - <= 1 x 50 mm² - rigid Tunnel type terminals (top or bottom) - <= 1 x 35 mm² - flexible Tunnel type terminals (top or bottom) - <= 1 x 35 mm² - flexible with ferrule |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
switch disconnector iSW - 4P - 63 A - 415 V
switch disconnector iSW - 4P - 100 A - 415 V
This Acti9 iSW is a modular and reliable switch disconnector. it is a 4P, rated current is 125A, and operating voltage is 415VAC. Electrical endurance goes up to 2500 cycles, and Mechanical endurance goes up to 20000 cycles. The operating temperature is -25°C to +60°C. The storage temperature is -40°C to +85°C. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. The width in 9mm pitches is 8. The dimensions are (W) 72mm x (H) 85mm x (D) 73mm. This switch disconnector is used for control and isolation. This product is compliant with EN/IEC 60947-3.
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iSW |
| Product or component type | Switch disconnector |
| Device short name | iSW |
| Device application | Isolation Control |
| Poles description | 4P |
| Utilisation category | AC-22A |
| Suitability for isolation | Yes |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 125 A at 415 V AC 50/60 Hz |
| [Ue] rated operational voltage | 415 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 1500 A |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz |
| [Uimp] rated impulse withstand voltage | 6 kV |
| control type | Toggle |
| Local signalling | ON/OFF indication |
| Contact position indicator | Yes |
| Mounting mode | Fixed |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 8 |
| Height | 85 mm |
| Width | 72 mm |
| Depth | 73 mm |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 2500 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) - <= 1 x 50 mm² - rigid Tunnel type terminals (top or bottom) - <= 1 x 35 mm² - flexible Tunnel type terminals (top or bottom) - <= 1 x 35 mm² - flexible with ferrule |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iSW-NA |
| Product or component type | Switch disconnector |
| Device short name | iSW-NA |
| Device application | Isolation Control |
| Poles description | 1P + N |
| Neutral position | Left |
| Utilisation category | AC-22A conforming to EN/IEC 60947-3 |
| Suitability for isolation | Yes conforming to EN/IEC 60947-3 |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 40 A at 230/240 V AC 50/60 Hz |
| [Ue] rated operational voltage | 230/240 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 800 A during 1 s |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz conforming to EN/IEC 60947-3 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-3 |
| control type | Toggle Remote tripping |
| Local signalling | ON/OFF indication |
| Contact position indicator | Yes |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 4 |
| Height | 85 mm |
| Width | 36 mm |
| Depth | 74 mm |
| Product weight | 0.17 kg |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 15000 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible with cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible without cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦35 mm² rigid without cable end |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
| Product compatibility | Tripping release |
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iSW-NA |
| Product or component type | Switch disconnector |
| Device short name | iSW-NA |
| Device application | Control Isolation |
| Poles description | 1P + N |
| Neutral position | Left |
| Utilisation category | AC-22A conforming to EN/IEC 60947-3 |
| Suitability for isolation | Yes conforming to EN/IEC 60947-3 |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 63 A at 230/240 V AC 50/60 Hz |
| [Ue] rated operational voltage | 230/240 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 1.26 kA during 1 s |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz conforming to EN/IEC 60947-3 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-3 |
| control type | Remote tripping Toggle |
| Local signalling | ON/OFF indication |
| Contact position indicator | Yes |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 4 |
| Height | 85 mm |
| Width | 36 mm |
| Depth | 74 mm |
| Product weight | 0.17 kg |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 15000 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible with cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible without cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦35 mm² rigid without cable end |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
| Product compatibility | Tripping release |
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iSW-NA |
| Product or component type | Switch disconnector |
| Device short name | iSW-NA |
| Device application | Isolation Control |
| Poles description | 1P + N |
| Neutral position | Left |
| Utilisation category | AC-22A conforming to EN/IEC 60947-3 |
| Suitability for isolation | Yes conforming to EN/IEC 60947-3 |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 80 A at 230/240 V AC 50/60 Hz |
| [Ue] rated operational voltage | 230/240 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 1.2 kA during 1 s |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz conforming to EN/IEC 60947-3 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-3 |
| control type | Toggle Remote tripping |
| Local signalling | ON/OFF indication |
| Contact position indicator | Yes |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 4 |
| Height | 85 mm |
| Width | 36 mm |
| Depth | 74 mm |
| Product weight | 0.17 kg |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 15000 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible with cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible without cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦35 mm² rigid without cable end |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
| Product compatibility | Tripping release |
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iSW-NA |
| Product or component type | Switch disconnector |
| Device short name | iSW-NA |
| Device application | Isolation Control |
| Poles description | 1P + N |
| Neutral position | Left |
| Utilisation category | AC-22A conforming to EN/IEC 60947-3 |
| Suitability for isolation | Yes conforming to EN/IEC 60947-3 |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 100 A at 230/240 V AC 50/60 Hz |
| [Ue] rated operational voltage | 230/240 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 1.5 kA during 1 s |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz conforming to EN/IEC 60947-3 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-3 |
| control type | Remote tripping Toggle |
| Local signalling | ON/OFF indication |
| Contact position indicator | Yes |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 4 |
| Height | 85 mm |
| Width | 36 mm |
| Depth | 74 mm |
| Product weight | 0.17 kg |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 15000 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible with cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible without cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦35 mm² rigid without cable end |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
| Product compatibility | Tripping release |
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iSW-NA |
| Product or component type | Switch disconnector |
| Device short name | iSW-NA |
| Device application | Isolation Control |
| Poles description | 3P + N |
| Neutral position | Left |
| Utilisation category | AC-22A conforming to EN/IEC 60947-3 |
| Suitability for isolation | Yes conforming to EN/IEC 60947-3 |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 40 A at 400/415 V AC 50/60 Hz |
| [Ue] rated operational voltage | 400/415 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 20 kA during 1 s |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz conforming to EN/IEC 60947-3 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-3 |
| control type | Toggle Remote tripping |
| Local signalling | ON/OFF indication |
| Contact position indicator | Yes |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 8 |
| Height | 85 mm |
| Width | 72 mm |
| Depth | 74 mm |
| Product weight | 0.3 kg |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 10000 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible without cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦35 mm² rigid without cable end |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
| Product compatibility | Tripping release |
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iSW-NA |
| Product or component type | Switch disconnector |
| Device short name | iSW-NA |
| Device application | Control Isolation |
| Poles description | 3P + N |
| Neutral position | Left |
| Utilisation category | AC-22A conforming to EN/IEC 60947-3 |
| Suitability for isolation | Yes conforming to EN/IEC 60947-3 |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 63 A at 400/415 V AC 50/60 Hz |
| [Ue] rated operational voltage | 400/415 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 800 A during 1 s |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz conforming to EN/IEC 60947-3 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-3 |
| control type | Toggle Remote tripping |
| Local signalling | ON/OFF indication |
| Contact position indicator | Yes |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 8 |
| Height | 85 mm |
| Width | 72 mm |
| Depth | 74 mm |
| Product weight | 0.3 kg |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 10000 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible with cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible without cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦35 mm² rigid without cable end |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
| Product compatibility | Tripping release |
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iSW-NA |
| Product or component type | Switch disconnector |
| Device short name | iSW-NA |
| Device application | Isolation Control |
| Poles description | 3P + N |
| Neutral position | Left |
| Utilisation category | AC-22A conforming to EN/IEC 60947-3 |
| Suitability for isolation | Yes conforming to EN/IEC 60947-3 |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 80 A at 400/415 V AC 50/60 Hz |
| [Ue] rated operational voltage | 400/415 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 1.2 kA during 1 s |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz conforming to EN/IEC 60947-3 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-3 |
| control type | Remote tripping Toggle |
| Local signalling | ON/OFF indication |
| Contact position indicator | Yes |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 8 |
| Height | 85 mm |
| Width | 72 mm |
| Depth | 74 mm |
| Product weight | 0.3 kg |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 10000 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible with cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible without cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦35 mm² rigid without cable end |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
| Product compatibility | Tripping release |
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iSW-NA |
| Product or component type | Switch disconnector |
| Device short name | iSW-NA |
| Device application | Control Isolation |
| Poles description | 3P + N |
| Neutral position | Left |
| Utilisation category | AC-22A conforming to EN/IEC 60947-3 |
| Suitability for isolation | Yes conforming to EN/IEC 60947-3 |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 100 A at 400/415 V AC 50/60 Hz |
| [Ue] rated operational voltage | 400/415 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 1.5 kA during 1 s |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz conforming to EN/IEC 60947-3 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-3 |
| control type | Toggle Remote tripping |
| Local signalling | ON/OFF indication |
| Contact position indicator | Yes |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 8 |
| Height | 85 mm |
| Width | 72 mm |
| Depth | 74 mm |
| Product weight | 0.3 kg |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 10000 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible with cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦25 mm² flexible without cable end Tunnel type terminals (top or bottom) 1 cable(s) 1â¦35 mm² rigid without cable end |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
| Product compatibility | Tripping release |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.