1 year warranty
Ask for quote
| Characteristic | Value(s) |
|---|---|
| Application specific I/O | Pulse totalising counter Pulse converter |
| Protection type | Against reverse polarity for auxiliary supply Against reverse polarity for input Overvoltage at 33 V DC for digital output |
| Immunity to microbreaks | 10 ms |
| Reset | Factory reset on front face By booted push-button By address encoder By plug in, plug out the power supply |
| Input/output type | 2 inputs + 1 output per digital channel |
| Input type | Current sink for digital input, 24 V DC +/- 20 % at 2.5 mA |
| Maximum permanent current | 5 mA for digital input |
| Electronic filtering time | 2 ms for digital input from state 0 to state 1 |
| Output type | Logic current source: 24 V - DC - 100 mA |
| Maximum voltage drop | <1 V at state 1 digital output |
| Inrush current | 0.5 A for digital output 7 A for power supply |
| Local signalling | Communication: 1 LED (yellow) Status: 1 LED (green, orange and red) |
| Type of setting | Modbus address 01...99 for address encoders Reset for address encoders Reset for plug in, plug out the auxiliary supply |
| Mounting position | Horizontal and vertical on DIN rail |
| Colour | White (RAL 9003) |
| Location of connection | Front |
| Connections - terminals | Spring-loaded terminal Ti24 qty: 11 for digital input/output, ordered separately Plug-in connector qty: 1 for supply circuit Plug-in connector qty: 1 for communication bus |
| Clamping connection capacity | 2 x 0.2...2 x 1.5 mm² for twisted shielded pairs cable, flexible with cable end for communication bus 2 x 0.2...2 x 1.5 mm² for twisted shielded pairs cable, flexible without cable end for communication bus 2 x 0.2...2 x 1.5 mm² for twisted shielded pairs cable, rigid with cable end for communication bus 2 x 0.2...2 x 1.5 mm² for twisted shielded pairs cable, rigid without cable end for communication bus 1 x 0.2...1 x 1.5 mm², flexible with cable end for control 1 x 0.2...1 x 1.5 mm², flexible without cable end for control 1 x 0.2...1 x 1.5 mm², rigid with cable end for control 1 x 0.2...1 x 1.5 mm², rigid without cable end for control 2 x 0.2...2 x 1.5 mm², flexible with cable end for supply circuit 2 x 0.2...2 x 1.5 mm², flexible without cable end for supply circuit 2 x 0.2...2 x 1.5 mm², rigid with cable end for supply circuit 2 x 0.2...2 x 1.5 mm², rigid without cable end for supply circuit |
| Wire stripping length | Control: 10 mm Supply circuit: 7 mm Communication bus: 7 mm |
| Communication network type | RS485 Modbus RTU client/server SUB-D 9 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps |
| 9 mm pitches | 0 useful |
| Height | 22.5 mm |
| Width | 359 mm |
| Depth | 42 mm |
| Product weight | 188 g |
| Provided equipment | Set of 1 bus connector Set of 1 power supply connector Set of 2 locking clips |
| Range compatibility | Acti 9 iTL auxiliary Linergy Linergy FM Acti 9 iOF+SD 24 Acti 9 iACT24 Acti 9 iATL24 PowerLogic pulse output meter Acti 9 RCA iC60 Acti 9 Acti9 iCT auxiliary Acti 9 Acti9 iC60 Acti 9 Acti9 iID Acti 9 Acti9 iSW-NA Acti 9 Acti9 iDPN Vigi Acti 9 Acti9 C40 Multi9 Multi9 C60 Acti 9 Acti9 DT40 Acti 9 Acti9 DT60 Acti 9 Acti9 I-NA Acti 9 Acti9 ITG40 Acti 9 Acti9 iDPN Acti 9 Acti9 Reflex iC60 Ti24 connector |
| Commissioning interface | EcoStruxure Power Commission |
| Market segment | Buildings Small commercial |
| Compatibility code | Acti 9 Smartlink |
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Ask for quote
Trusted By
Need More?
Contact Us
we're here to support your business.
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator