Machine Vision Systems

€347,95

Only 6 units left

Specifications

Model			GP-M010T
Rated pressure			–14.5 to +145.0 PSI (–0.1 to +1 MPa)
Possible display range			–30.5 to +161.0 PSI (–0.210 to +1.110 MPa)
Allowable pressure			580 PSI (4 MPa)
Zero-cut pressure value			±0.5% of F.S.
Burst pressure			2176 PSI (15 MPa)
Display resolution			0.15 PSI (0.001 MPa)
Fluid type			Gas or liquid that will not corrode the fluid contact part
Type of pressure			Gauge pressure
Precision			±1.0% of F.S. or less^*1
Repeatability			±0.3% of F.S. or less^*2
Temperature characteristics			±0.6% of F.S. / 10°C 50°F
Connection port			G3/4 (Changes to R1/8 male, R1/4 male, R3/8 male, G1/4 female, NPT1/8 male, and NPT1/4 male with available adapters.)
Box rotation angle			Maximum 330°
Medium temperature			–20 to +100°C –4 to +212°F (no freezing/condensation)^3^4
Power voltage			10 to 30 VDC, Ripple (P-P): 10% max., Class 2 or LPS
Current consumption			60 mA or less (when 24 V: 30 mA or less; when 12 V: 50 mA or less. Excluding output)^*5
Possible display range (temperature)			–32 to +112°C –25.6 to +233.6°F
Display method			4 column digital LED white/Vertical inversion of display is possible
Display resolution (temperature)			0.1°C 32.18°F
Liquid contact temperature measurement accuracy			±3.5°C ±6.3°F (at an ambient temperature of 25°C 77°F)^*6
Display method			Status indicator (orange, green, red, blue), output indicator 1 (orange), output indicator 2 (orange), temperature indicator (white), communication indicator (green)
Pressure hysteresis			During hysteresis mode: variable (Hysteresis is the difference between the upper setting value and the lower setting value) During window mode: fixed (0.5% of F.S.)
Pressure responsiveness	Control output		Selectable from 3 to 5000 ms
	Analog output		As above +2 ms (90% response)
Output	Output 1 control output		NPN/PNP open collector (Selectable) 30 V or less, Output 2 Max. 100 mA Residual voltage for the Main Unit is 1 V or less, N.O./N.C. selectable
	Output 2 replacement type	Control output
		Analog output	Pressure analog output/temperature analog output (selectable), 4–20 mA; maximum load resistance 260 Ω
Network compatibility			IO-Link^*7
Environmental resistance	Enclosure rating		IP67
	Ambient temperature		–20 to +80°C –4 to +176°F (no freezing or condensation)^*8
	Relative humidity		35 to 85% RH (no condensation)^*8
	Vibration resistance		IEC60068-2-6 20 G (10 to 2000 Hz In each direction of X, Y, Z for 2 hours)
	Shock resistance		IEC60068-2-27 50 G (11 ms In each direction X, Y, Z 3 times)
Material properties	Wetted part		Pressure port: SUSXM7/Diaphragm pressure port: Al₂O₃/O-Ring: FKM
	Other parts		Housing metal portion: SUS304, SUS303; Housing plastic portion: PPSU; Air hole^*9: PTFE, nickel-plated brass.
Applicable cable			M12 connector 4 pin
Weight			Approx. 150 g 5.29 oz
^1 This is the value when considering linearity + hysteresis + repeatability in a stable environment of 23°C 73.4°F. ^2 The repeatability, based on consistent conditions, is the difference in the detection points at the time of fluctuations in the repetition. ^3 When the temperature of the piping exceeds 80°C 176°F, do not connect the cable. ^4 Condensation may cause measurement failure or breakage. To prevent condensation, take the following measures: • Make sure the ambient temperature is the same or lower than the fluid temperature. • Use A/C for dehumidification. • Keep the sensor 30 cm 11.81" or more from the cooling pipe using connective piping. ^5 Consumption current including output is 0.3 A and under. ^6 This is the value when the measured fluid is water and a KEYENCE adapter is used. ^7 IO-Link specification v1.1/COM2 (38.4 kbps) is supported. ^8 See "7" in "Other precautions" on P.13 for measures on preventing condensation. ^*9 Only GP-M001T/M010T/M025T

Keyence XG-HL08M Keyence

€4.142,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-M201 Keyence

€959,95

Only 9 units left

Specifications

Model		SJ-M201
Type		Controller Unit
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Static elimination time		0.5 sec max. ^*1
Ion balance		±15 V or less ^*2
Supply pressure range		0.001 to 0.5 MPa ^*3
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open c ollector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 65 % RH
Weight		Approx. 300 g
^1 At installation distance 50 mm 1.97", air flow 60 Nl/min (ambient temperature 20 to 30°C 68 to 86°F, relative humidity 40 to 60%) ^2 Values obtained at an installation distance of 50 mm 1.97" and air flow rate of 20 Nl/min ［ambient operating temperature +20 to +30°C +68 to +86°F, ambient operating humidity 40 to 60% RH］ (without nozzle) ^*3 Inquire for derating of humidity/pressure in environments exceeding +35°C 95°F. Use clean or dry air at a temperature of -20°C -4°F or less. Min. air pressure varies by nozzle used.

Keyence OP-89034 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-MS1 Keyence

€0,00

Sold Out

Specifications

Model				SJ-MS1
Applicable product				SJ-M Series

Keyence VG-C7R Keyence

€400,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MD-U2010 Keyence

€0,00

Sold Out

Specifications

Model		MD-U2010
Type		2.5 W type Standard area type Head
Marking laser	Output	3 W/40 kHz (output at contact point: 2.5 W)
	Q-switch frequency	CW (continuous oscillation), 40 to 400 kHz
Laser class	Marking laser	YVO₄ laser wavelength: 355 nm class 4 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Distance measurement laser	Semiconductor laser wavelength: 683 nm output: 5.0 mW class 3R laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Guide laser	Semiconductor laser wavelength: 655 nm output: 1.0 mW class 2 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
Marking area		125 × 125 × 42 mm 4.92"×4.92"×1.65"
Standard working distance (±variation width)		189 mm 7.44" (± 21 mm ± 0.83")
Marking method		XYZ 3-axis simultaneous scanning method
Marking method	XY scanner	Digital galvo scanner
	Z scanner	Linear motor
Optional models	3D marking	MD-AD-3D
	Built-in camera alignment	MD-AD-XYT
	Autofocus	MD-AD-ZT
	Built-in 2D code reader	MD-AD-2DR/MD-AD-2DRA (corresponding standard ISO/IEC TR 29158 (AIM DPM-1-2006))
	Handheld console	MC-P1
	Laser safety module	MD-C2BU
	PC software	MB-PH1 (Marking Builder Plus/Marking Diagnostic Tool)^*2
Built-In Camera	Image sensor	CMOS image sensor (2.3 megapixels)
	No. equipped	2 (full-view camera/coaxial camera)
	Built-in light source	High-intensity green LED
Built-in power meter		Thermopile
Logging function		Internal operation/terminal block/communication/error/operating information/built-in camera image
Character type	Font	Original Font/User Font/TrueType Font/OpenType Font^*3
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93/GS1 DataBar
	2D code	QR Code/Micro QR Code/DataMatrix (ECC200/GS1 DataMatrix/DMRE)
	Logo image	DXF/BMP/JPEG/PNG/TIFF
	Appearance	Plane, 3D shapes (slope, cylinder, cone, sphere, 3DCAD (STL))^*4
	Work state	Stationary/moving (constant velocity, encoder/rotary marking)
Input / Output		Terminal block input and output/MIL connector input and output/Laser safety module control input and output^*5
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX)^*6
Marking unit cable length		4.6 ± 0.1 m 15.1' ± 0.3'
Enclosure rating		IP64 (head part)
Environmental resistance	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Ambient temperature	0 to 40°C 32 to 104°F
	Ambient temperature for transport/storage	Max. 85% RH (no condensation)
	Relative humidity
Weight		Controller: 9.7 kg 21.38 lb Head: 21.7 kg 47.84 lb Control cable: 2.5 kg 5.51 lb Console: 2.0 kg 4.41 lb
Compatible regulations		EU Directives (EMC Directive, Low Voltage Directive, RoHS Directive) / EN Standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN63000) / CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1, UL61010-1) / North American Standards (FCC Part 15B, ICES-001 Class A) / China RoHS/UKCA
^1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice ^2 Download from the KEYENCE website. Software supported languages: English, Japanese, Chinese (Simplified), Chinese (Traditional), German, Korean, French, Spanish, Thai, Italian ^3 Only TrueType fonts and OpenType fonts with “Installable” or “Editable” font attributes are supported. This attribute can be found in properties at Control Panel - Font. ^4 When using MD-AD-3D ^5 When a laser safety module (MD-C2BU) is installed ^6 The USB ports are USB memory, USB mouse port, barcode reader (A connector) and a dedicated Marking Builder Plus (ActiveX) port (B connector). Supported Ethernet ports include Marking Builder Plus (ActiveX), Operation Monitor, Communication with diagnostic tools and TCP/IP communication, PROFINET, EtherNet/IP^TM, EtherCAT®, and FTP client.

Keyence IV-150M Keyence

€964,95

In stock, 13 units

Specifications

Model		IV-150M
Type		Short range
Installed distance		50 to 150 mm 1.97" to 5.91"
View		Installed distance 50 mm 1.97": 12 (H) × 9 (V) mm 0.47" (H) × 0.35" (V) to installed distance 150 mm 5.91": 36 (H) × 27 (V) mm 1.42" (H) × 1.06" (V)
Image sensor	Type	1/3 inch monochrome CMOS
	Pixel	752 (H) x 480 (V) 29.61" (H) x 18.90" (V)
Focus adjustment		Manual
Exposure time		1/20 to 1/25,000
Lights	Illumination	Red LED
	Lighting method	Pulse lighting/DC lighting is switchable
Tools	Type	Shape Detection, Color Area^1, Area^2, position adjustment
	Number	Detection tools: 16 tools, position adjustment tool: 1 tool^*3
Switch settings (programs)		32 programs
Image history	Numbers	300 images^4^5
	Condition	NG only/All is selectable^*5
Analysis information		OFF/Statistics/Histograms is switchable Statistics: Processing time (latest value, MAX, MIN, AVE), number of OKs, number of NGs, trigger numbers, trigger errors, judgment results list by tools Histograms: Histogram, matching degree (latest value, MAX, MIN, AVE), numbers of OKs, numbers of NGs^*6
Other functions		HDR, HighGain, Color filters^1, Digital zoom^7, Brightness correction, Tilt correction, White balance^1, Mask outline, Mask area, Test run, ToolAutoTune, Input monitor, Output test, Security settings, Simulator^8
Indicators		PWR/ERR, OUT, TRIG, STATUS, LINK/ACT
Input	Type	Non-voltage input/voltage input is switchable For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
	Inputs	6 inputs (IN1 to IN6)
	Function	IN1: External trigger, IN2 to IN6: Enable by assigning the optional functions Assignable functions: Program switching, Clear error, External master image registration
Output	Type	Open collector output NPN/PNP is switchable, N.O./N.C. is switchable For open collector NPN output: Maximum rating 26.4 V 50 mA, remaining voltage 1.5 V or lower For open collector PNP output: Maximum rating 26.4 V 50 mA, remaining voltage 2 V or lower
	Outputs	4 outputs (OUT1 to OUT4)
	Function	Enable by assigning the optional functions Assignable functions: Total judge result, RUN, BUSY, Error, Position adjustment result, Judge result of each tool, Result of the logical operation of each tool
Ethernet	Standard	100BASE-TX/10BASE-T^*9
	Connector	M12 4pin connector^*9
Network function		FTP client, EtherNet/IP™, PROFINET
Rating	Power voltage	24 VDC ±10 % (including ripple)
	Current consumption	0.6 A or less
Environmental resistance	Enclosure rating	IP67^*10
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions^*11
	Shock resistance	500 m/s², 3 times in each of 6 directions^*11
Material		Main unit case: Aluminium die-casting, Packing: NBR, Front cover: Acrylic, Mounting adapter: POM
Weight		Approx. 270 g
^1 Color type only ^2 Possible with both the Color type and monochrome type ^3 Tools can be installed by programs. ^4 When using the FTP client function: 210 pictures ^5 Saves to the memory in the sensor. The images saved in the sensor can be backed up to the USB memory installed to the intelligent monitor (IV-M30) or to the PC by the software for IV (IV-H1). ^6 This can be displayed on the intelligent monitor (IV-M30) or by software for the IV/IV-G Series (IV-H1). ^7 Possible with both the color type and monochrome type ^8 Simulator can be used with the IV software (IV-H1). ^9 This is for connection with the intelligent monitor (IV-M30) or software for IV (IV-H1). ^10 Except when polarized filter attachment (OP-87436/OP-87437) is mounted ^*11 Except when IV-G dome attachment (IV-D10) is mounted

Keyence ER-C18 Keyence

€0,00

Sold Out

Specifications

Model				ER-C18
Type				M18 Through-Metal cap (×2)
Material				SUS303
Weight				Approx. 35 g 1.24 oz

Keyence CA-DRR13M Keyence

€3.543,95

Only 5 units left

Specifications

Model				CA-DRR13M
Type				Multi-angle Light (Ring)
LED color				Red
Power consumption				12.5 W
Input voltage				12 VDC
Weight				Approx. 260 g

Keyence GL-SA16S Keyence

€0,00

Sold Out

Specifications

Model				GL-SA16S
Type				Protection cover Slim type for 16 beam axes
Overview				This protective case protects the main unit from impacts.
Applicable product				GL-S16SH
Number included				1
Length				342.6 mm 13.49"
Material				aluminum
Note				2 each of the following are included: hexagon socket head cap screw (width across flats: 3 mm), washer, and special hexagon socket head cap screw (M4, length: 13 mm, width across flats: 3 mm).
Weight				110 g

Keyence SJ-M030G Keyence

€2.057,95

Only 5 units left

Specifications

Model		SJ-M030G
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Supply pressure range		0.2 MPa max.
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open-collector, 100 mA max. (40 V max.)
	Ion level alarm output
	Condition alarm output
Effective length		164 mm 6.46"^*2
Total length		220 mm 8.66"^*3
Rating	Power voltage	24 VDC ±10%
	Current consumption	450 mA max.
Environmental resistance	Ambient temperature	0 to +40°C 32 to +104°F
	Relative humidity	35 to 65%RH (no condensation)
Weight		Approx. 600 g
^1 Measured under the following conditions: [SJ-M030G/M070G] Air purge: 3 NL/min per electrode Down flow: 0.3 m/s 0.98 ft/s Operating distance: 50 mm 1.97"(50 Hz), 600 mm 23.62" (8 Hz), 1500 mm 59.06"(1 Hz) [SJ-M030C/M070C] Air purge: None Down flow: 0.3 m/s 0.98 ft/s Operating distance: 50 mm 1.97"(50 Hz), 600 mm 23.62" (8 Hz), 1500 mm 59.06"(1 Hz) ^2 Effective length indicates static elimination range at 50 mm 1.97" operating distance. ^*3 Overall length includes mounting brackets.

Keyence CA-CH5RX Keyence

€1.380,95

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AP-C30KP Keyence

€423,95

Only 4 units left

Specifications

Model		AP-C30KP
Type		Multi range, PNP
Rated pressure		Negative pressure mode: 0 to -29.9 inchHg Positive pressure mode: 0 to 29.5 inchHg Compound pressure mode: 29.9 to -29.9 inchHg
Fluid type		Air or non-corrosive gases
Type of pressure		Gauge pressure
Display		3 1/2-digit, 2-color, 7-segment LED (Character height: 0.43" (11 mm)) Display cycle: 10 times/s
Operation indicator		Red LED x 2 (corresponding to control output 1 and 2)
Display resolution		Multi range: Negative/Positive 0.1 inchHg, Compound 0.1 inchHg
Power consumption	Normal	12 V: 900 mW (75 mA) or less, 24 V: 1,320 mW (55 mA) or less
	Eco mode	12 V: 600 mW (50 mA) or less, 24 V: 960 mW (40 mA) or less
Display temperature characteristic		±1 % of F.S. max.
Hysteresis		Variable (Standard: 0.5 % of F.S.)^*1
Response time (Chattering prevention function)		2.5, 5, 100, or 500 ms (selectable)
I/O	Analog output	1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)
	Zero-shift input	Input time: 2 ms or more. (or analog output selectable)
	Control output	PNP open collector 100 mA max. (at 30 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable)
Pressure port		NPT 1/8 180 ° rotation
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Pressure resistance	500 kPa
	Ambient temperature	0 to 50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting
Accessories		Power supply cord (6.6' 2-m with connector)
Weight		Approx. 30 g (without cable) /Approx. 85 g (with 6.6' 2-m cable)
^*1 A standard of 0.2 % of FS applies while in focus mode.

Keyence FD-MA2A Keyence

€422,95

Only 5 units left

Buy the Keyence FD-MA2A - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FD-MA2A is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence MD-X2520A Keyence

€82.718,95

Only 1 unit left

Specifications

Model		MD-X2520A
Type		Marking unit (controller + head) 25 W Wide area
Software		MB-PH1 ^*1 (Marking Builder Plus, Marking Diagnostic Tool)
HMI console		MC-P1
3D function add-in (sold separately)		MD-AD-3D
XY tracking add-in (sold separately)		MD-AD-XYT
Z tracking add-in (sold separately)		MD-AD-ZT
2D code reader add-in (sold separately)		MD-AD-2DR/MD-AD-2DRA
Marking method		XYZ 3-Axis simultaneous scanning method
Marking laser		YVO₄ laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA(CDRH) Part 1040.10) ^*2
Marking laser	Wavelength	1064 nm
	Output	25 W
Q-switch frequency		CW (continuous wave), 1 to 400 kHz
Distance laser		Semiconductor laser Wavelength: 683 nm Output: 5.0 mW Class 3R laser product (IEC60825-1, JIS6802, FDA (CDRH) Part1040.10) ^*2
Guide laser/working distance pointer		Semiconductor laser, wavelength: 655 nm output: 1.0 mW Class 2 Laser Product (IEC60825-1, JIS6802, FDA(CDRH) Part 1040.10) ^*2
Marking area		330 × 330 × 42 mm 12.99" × 12.99" × 1.65"
Standard working distance (±variable width)		300 mm (±21 mm) 11.81" (±0.83")
Marking resolution		5 μm
Scan speed		Max. 8000 mm/s 314.96"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font ^*3
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/ GS1 DataBar Limited/GS1 DataBar Limited CC-A/GS1 DataBar Truncated/GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary marking, Moving marking (constant, encoder)
	Character size (height/width)	0.1 to 330 mm 0.004" to 12.99"
	No. of registered jobs	2000 max.
	No. of setting blocks	256
Input/output		Terminal block I/O, MIL connector I/O, laser safety module control I/O ^*4
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX/10BASE-T) ^*5
Marking head installation direction		All directions
Marking head cable length		4.3 ±0.1 m 14.1' ±0.3'
Cooling method		Forced air cooling
Applicable regulations		EU directives (EMC Directive, Low Voltage Directive, RoHS Directive)/EN standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN50581)/ CSA standards and UL standards (CAN/CSA C22.2 No.61010-1, UL61010-1)/North American regulations (FCC Part 15B, ICES-001 Class A)/China RoHS/UKCA
Rated voltage and power consumption		100 to 240 VAC ±10% 50/60 Hz, 850 VA max.
Environmental resistance	Enclosure rating	IP64 (marking head)
	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Ambient humidity for transport/storage	30 to 85% (no condensation)
	Ambient temperature	0 to 40°C 32 to 104°F
	Relative humidity	30 to 85% (no condensation)
	Overvoltage category	II
	Pollution degree	2
Weight		Controller: 23.0 kg 50.71 lb Marking head: 13.8 kg 30.42 lb Console: 2.0 kg 4.41 lb
^1 Download from the KEYENCE website. Supported operating systems: Windows 11/Windows 10 Languages:English/Japanese/Simplified Chinese/Traditional Chinese/German/Korean/French/Spanish/Thai/Italian. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel]. ^4 Only when the laser safety module (MD-C2A/MD-C2B) is installed. ^*5 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder Plus (ActiveX). The Ethernet port supports communication with Marking Builder Plus (ActiveX), TCP/IP communication, EtherNet/IP™ and PROFINET.

Keyence OP-88655 Keyence

€178,95

Only 10 units left

Specifications

Model				OP-88655
Type				12-pin power supply cable
Length				5 m 16.4'
Weight				Approx. 300 g

Keyence SJ-Q084 Keyence

€0,00

Sold Out

Specifications

Model		SJ-Q084
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 Vmax
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±3 V ^*1
Clean rating		ISO14644-1 Class 3 ^*2
Installation distance		10 mm 0.39" or more
Control input	Static elimination stop input	NPN open collector or non-voltage contact signal
Control output	Ion level warning, condition warning, alarm output	NPN open collector Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Communication functions		Remote control
Average power consumption		Normal operation: 8.4 W, LPC mode: 4.1 W ^*3
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc1/8
Air supply pressure		0.1 to 0.5 MPa 14.50 to 72.52 PSI (recommended air pressure: 0.2 MPa 29.01 PSI)^*4
Effective length		920 mm 36.22" ^*5
Total length		800 mm 31.50"
No. ofelectrodes		13
Rating	Power voltage	24 to 36 VDC±10%
	Current consumption	Normal operation: 700 mA or less, LPC mode: 170 mA (typical) ^*3
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	85% RH or less (no condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		1120 g 39.53 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81", Air supply pressure: 0.2 MPa 29.01 PSI, Frequency: Highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH, Measurement position: Bar Center ^2 Contact us for detailed conditions. ^3 24 VDC ^4 If you wish to use the air purge function with intermittent air supply, contact us. ^*5 Effective length is for static elimination range when installation distance is 100 mm 3.94".

Keyence GL-R95F-R Keyence

€1.371,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ER-GW18N Keyence

€0,00

Sold Out

Specifications

Model		ER-GW18N
Type		Weld-resistant all-metal shielded type Screw type M18 Cable NPN output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	10 mm 0.39" ±10% ^*2
	With distance switching (Mode 2)	5 mm 0.20" ±10% ^*2
Response frequency		2 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±20% or less of detecting distance at +25°C +77°F (+55 to +85°C 131°F to 185°F)
Control output		Open-collector, 30 VDC or less; 100 mA or less for 1 output; 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +85°C -13°F to +185°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G² /Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface and case: SUS303 with ceramic coating, Button: PBT, Nut: SUS303 with ceramic coating, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP) [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 110 g 3.88 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +70°C +158°F or higher is 33% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence FD-MH10A Keyence

€920,95

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MP-FCAS10 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-E300LJ Keyence

€0,00

Sold Out

Specifications

Model		CA-E300LJ
Controller		XG-X2902LJ
Head input		2 points ^*1
Supported heads		LJ-S015/LJ-S025/LJ-S040/LJ-S080/LJ-S160/LJ-S320/LJ-S640
Power supply		Supplied from controller
Environmental resistance	Ambient temperature	0 to +45°C 32 to 113°F (DIN rail mount) / 0 to +40°C 32 to 104°F (base surface mount)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 560 g 19.77 oz
^*1 When two input units are connected, one head can be connected to each unit. In such configurations, the heads can be different models.

Keyence CL-V020 Keyence

€0,00

Sold Out

Specifications

Model				CL-V020 ^*1
Type				Sensor head (20 mm vacuum and heatresistant model)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.