Machine Vision Systems

€219,95

In stock, 52 units

Specifications

Model		FS-V31
Type		1-output with cable
Output		NPN
Main unit/Expansion unit		Main unit
Control output		1 output
Monitor output (1 to 5 V)		N/A
External input
Connector		―
Light source LED		Red, 4-element LED (Wavelength: 640 nm)
Response time		33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)
Output selection		LIGHT-ON/DARK-ON (switch-selectable)
Display indicator		Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P, Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Size		30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)
Detection mode		Light intensity (area detection possible, automatic sensitivity-tracking function provided)
Timer function		OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control output		NPN open-collector 24 V, 100 mA max.^*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
External inputy		Input time: 2 ms (ON)/20 ms (OFF) min.^*2
Unit expansion		Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.
Number of interference prevention units	Normal operation	HIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Power consumption	Normal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)^*3
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Polycarbonate
Accessories		N/A
Weight		Approx. 80 g
^1 Total current of two outputs should be less than 100 mA. ^2 Only available on certain models. ^3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA). ^4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Keyence VS-C500CX Keyence

€0,00

Sold Out

Specifications

Model		VS-C500CX
Storage	Internal storage	7 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Image size	2/3"
	Pixel size	3.45 μm 0.14 Mil
	Frame rate	55 fps
Lens	Mount	C-mount
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1
Functions	Output image pixels	2448 × 2048
	Exposure time	0.015 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*2
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		93.2 mm × 52.6 mm × 66 mm 3.67" × 2.07" × 2.60"
Case temperature		0°C to 65°C 32 to 149°F ^*3
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*4
Weight		Approx. 420 g 14.83 oz
^1 Using the configuration software, format the media before use. ^2 Maximum instantaneous current. Average current is below current consumption (including lighting). ^3 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^4 ESD-Safe, IEC61340-5-1 compliant.

Keyence SI-H1 Keyence

€0,00

Sold Out

Specifications

Model				SI-H1^*1
Type				Configuration Software for the SI Series
Operating System				Windows 11 Pro Windows 10^2 Windows 7 (SP1 or later)^3 Windows Vista (SP2 or later)^4 Windows XP (SP3 or later)^5
CPU				Pentium III 1 GHz or higher (1.7 GHz or higher recommended)
Memory capacity				256 MB or more (1 GB or more recommended)
Available hard disk space				1 GB or more
Display				1024 x 768 pixels, 24-bit full color or better
PC interface				The PC must be equipped with one of these interfaces: USB: Revision 2.0 HighSpeed (USB1.1 compatible full speed)^6 LAN: 100BASE-TX, 10BASE-T^7 RS-232C (serial port)
^1 Use under an environment that exceeds the recommended environment of the your OS. ^2 Editions supported: Home, Pro, Enterprise. ^3 Editions supported: Home Premium, Professional, Ultimate. ^4 Editions supported: Ultimate, Business, Home Premium, Home Basic. ^5 Supports Professional and Home Edition. ^6 Does not support connection via a USB hub. ^*7 Does not support connection via private LANs or routers. Use in a 1:1 or local connection.

Keyence VL-C45 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DD-860 Keyence

€1.170,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MS2-H300 Keyence

€392,95

Only 5 units left

Specifications

Model		MS2-H300
Input conditions	Input voltage	85 to 264 VAC, 110 to 370 VDC^*1
	Frequency	47 to 63 Hz, DC^*1
Inputconditions	Input current (100/200 VAC)	3.9/1.8A or less
	Efficiency (100/200 VAC)	82, 85% typ. (at 100% load)
	Leakage current (100/200 VAC)	0.4, 0.75 mA or less (at 100% load)
	Rush current (100/200 VAC)	18/36A or less
Output characteristics	Rated voltage	24V
	Variable voltage range	±5% (with V.ADJ)
	Rated current	12.5A
	Ripple/noise voltage	180mV (p-p) or less
	Input fluctuation	0.4% or less
	Load fluctuation	1.5% or less
	Temperature fluctuation	0.02%/°C or less
	Startup time	500 ms or less (when the ambient usage temperature is between 0 and +55°C 32 and 131°F with rated I/O conditions)
	Output holding time	20 ms or more (when the ambient usage temperature is +25°C 77°F and with rated I/O conditions)
Protection	Overcurrent protection	Constant current drop method, automatic recovery, 15.6 A or more
	Overvoltage protection	Activates at 26.4 V or more, voltage interruption method, recovers when input is applied again^*2
Display	Display power	3-digit 7-segment LED (character height: 10 mm 0.39")
	Power off memory time	Approx. 10 years (at +20°C 68°F)
	Display resolution	0.1A/0.4V /1%
Applicable standards	Safety standards	UL: UL508, UL60950-1; C-UL: CSA C22.2 number 14-M95, CSA C22.2 number 60950-1-03; EN: EN60950-1, EN50178; IEC: IEC60950-1
	EMC standard	FCC Part 15 B Class A, EN55011 Class A, EN61000-6-2
	Limits for harmonic current emissions	EN61000-3-2^*3
Other	Parallel operation	Possible (requires OP-42207)^*4
	Series operation	Possible (requires external diode)^*4
	Cooling method	Natural air cooling
Environmental resistance	Insulation resistance	100 MΩ or more at 500 VDC (between input and output, between input and FG, and between output and FG)
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing) (see the derating characteristics)
	Relative humidity	25 to 85 % RH (No condensation)
	Storage temperature	-20 to +70 °C -4 to 158 °F (No freezing)
	Withstand voltage	3.0 kVAC, 50/60 Hz, 1 min (across input and output terminals) 2.0 kVAC, 50/60 Hz, 1min (across input terminals and PE terminal) 500 VAC, 50/60 Hz, 1min (across output terminals and PE terminal)
	Vibration resistance	10 to 57 Hz, Double amplitude 0.3 mm 0.01", 57 to 500 Hz, 19.6 m/s² (2 G), cycle: 5.5 minutes, 2 hours in each of the X, Y, and Z directions
	Shock resistance	Peak acceleration: 300 m/s², 2 times in each of the X, Y, and Z directions
Weight		Approx. 1,540 g
^1 The rated input voltage and rated frequency when applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^2 To return, turn OFF the input power supply and after leaving it off for 1 minute or more, plug in the input power supply again. The E/F Series is a Zener diode clamp type. It will not restart after the protection circuit operation. ^3 For the MS2-H100, this is applicable only when the load ratio is 70% or less. ^4 The applicable standards do not apply for parallel and serial operations.

Keyence SV2-C10A Keyence

€0,00

Sold Out

Specifications

Model				SV2-C10A
Type				Motor power cable, Standard
Length				10 m 32.8'
Note				for 50 W / 100 W motor

Keyence VT-B12 Keyence

€0,00

Sold Out

Specifications

Model				VT-B12
Type				12" weatherproof cover
Applicable product				VT5-WX12/X12

Keyence CA-DQB7M Keyence

€0,00

Sold Out

Specifications

Model				CA-DQB7M
Type				Square Lights (Multi-Angle)
LED color				blue
Power consumption				11.3 W
Weight				Approx 160 g

Keyence BZ-H5CM Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV3-D10 Keyence

€0,00

Sold Out

Specifications

Model				IV3-D10
Supported sensor				IV3-500CA / IV3-500MA / IV3-600CA / IV3-600MA^*1
Installed distance				0 to 50 mm^*2
Material				Outer: PBT Inner: PC
Weight				Approx. 230 g
^1 When used with the IV3-600CA / 600MA, there will be areas that are not visible in the corners of the field of view. ^2 Distance from the front of the IV3-D10 to the target.

Keyence BL-1371 Keyence

€1.803,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-VM10LN Keyence

€0,00

Sold Out

Specifications

Model			GL-VM10LN
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			10
Total length			400 mm 15.75"
Detection height			360 mm 14.17"
Protection height			445 mm 17.52"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.3
		OFF→ON	46.2 ^*3
		All blocked→ON	51.9 ^*4
	With channel A or B	ON→OFF	10.7
		OFF→ON	54.8 ^*3
		All blocked→ON	69.0 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	71 ^*5
		Receiver	85 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	49 ^*5
		Receiver	56 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		270 g 9.53 oz
	Receiver
	Total		540 g 19.06 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence GL-VM111FN Keyence

€0,00

Sold Out

Specifications

Model			GL-VM111FN
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			111
Total length			1120 mm 44.09"
Detection height			1100 mm 43.31"
Protection height			1124 mm 44.25"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	8.5
		OFF→ON	54.4 ^*3
		All blocked→ON	66.5 ^*4
	With channel A or B	ON→OFF	27.6
		OFF→ON	91.5 ^*3
		All blocked→ON	131.2 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	135 ^*5
		Receiver	149 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	63 ^*5
		Receiver	70 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		730 g 25.76 oz
	Receiver		740 g 26.12 oz
	Total		1470 g 51.89 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence KZ-40T Keyence

€448,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence NQ-P4C10 Keyence

€0,00

Sold Out

Specifications

Model				NQ-P4C10
Length				10 m 32.8'
Material				PVC
Weight				Approx. 350 g 12.34 oz

Keyence FR-LEX20L Keyence

€0,00

Sold Out

Specifications

Model		FR-LEX20L
Type		2-wire explosion-proof model
Measuring range		Up to 15 m 49.2'^*1
Display range		Up to 25 m 82.0'^*1
Measurable dielectric constant of medium		2 or more ^*2
Resolution		1 mm 0.04"
Precision		Up to 0.1 m 0.3': ±10 mm 0.39"; 0.1 to 10 m 0.3' to 32.8' : ±1 mm 0.04"; 10 to 20 m 32.8' to 65.6': ±2 mm 0.08" ^*3
Response time		1 s, 4 s (default value), 10 s, 25 s
Tank pressure		-0.1 to +1 MPa (-0.1 to +0.1 MPa below -20°C -4°F)
Material	Tank interior	Lens: PTFE; Internal seal: FFKM; Fastener: SUS304
	Housing	PPS PC PA Internal potting agent: Epoxy resin (when using an Isolated barrier) Barrier: PC (when using a Zener barrier) Barrier: PC (when using a Zener barrier with a flameproof enclosure) Explosion-proof enclosure: Aluminium die casting, NBR Cable glands: Nickel-plated brass, chloroprene
Connection diameter		G1-1/2 (40A)
Output	No. of control outputs	─
	Control output/auxiliary output
	Analog output	4 to 20 mA (Response time: 3 s after internal value is confirmed [90% response])
Network compatibility		HART
Analog output accuracy	Resolution	1 mm 0.04"^*4
	Zero accuracy	±0.1 mA (zero point = 4 mA) ^*4
	F.S. accuracy	±0.2 mA (full scale = 20 mA) ^*4
Power supply	Power voltage	18.3 to 35 VDC. (when using an Isolated barrier) 24 VDC +25%/-10% (when using a Zener barrier) 20.1 to 28 VDC (when using a Zener barrier with a flameproof enclosure) 20.1 to 28 VDC
	Power consumption	752.5 mW or less (including analog output; excluding load current) (when using an Isolated barrier) 3 W or less (when using a Zener barrier) 602 mW or less (when using a Zener barrier with a flameproof enclosure) 602 mW or less
Environmental resistance	Ambient temperature	-30 to +60°C -22 to 140°F (no freezing) (when using an Isolated barrier) Barrier: -30 to +60°C -22 to 140°F (no freezing) (when using a Zener barrier) Barrier: -30 to +60°C -22 to 140°F (no freezing) (when using a Zener barrier with a flameproof enclosure) Barrier: -30 to +60°C -22 to 140°F(no freezing)
	Relative humidity	Up to 85% RH (no condensation)
	Temperature of coupling used	-30 to +85°C -22 to 185°F (no freezing)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G² X, Y and Z directions
	Shock resistance	100 m/s² (10 G), 16 ms pulses, 1000 times each in X, Y and Z directions
IECEx	Explosion-proof performance	Ex ia IIC T4 Ga or Ex ia IIB T4 Ga Ex ia IIIC T135°C Da (when using an Isolated barrier) [Ex ia Ga] IIC or [Ex ia Ga] IIB [Ex ia Da] IIIC (when using a Zener barrier) [Ex ia Ga] IIB [Ex ia Da] IIIC (when using a Zener barrier with a flameproof enclosure) Ex db [ia Ga] IIB T4 Gb Ex tb [ia Da] IIIC T135°C Db
	Zone	Zone 0/20 (when using an Isolated barrier) Do not install in a hazardous location (associated apparatus^5) (when using a Zener barrier) Do not install in a hazardous location (associated apparatus^5) (when using a Zener barrier with a flameproof enclosure) Zone 1/21
	Electrical ratings	U_i: 35 VDC / I_i: 142.4 mA / P_i: 1000 mW / L_i: 26.2 nH / C_i: 79 nF (when using an Isolated barrier) U_m: 250 VRMS / U_o: 26.78 VDC / I_o: 115.307 mA / P_o: 772 mW / L_o (IIC): 0.2 mH / C_o (IIC): 0.092 μF / L_o (IIB): 0.2 mH / C_o (IIB): 0.72 μF (when using a Zener barrier) U_m: 250 VRMS / U_o: 34.33 VDC / I_o: 112.007 mA / P_o: 961.3 mW / L_o: 1.0 mH / Co: 0.37 μF (when using a Zener barrier with a flameproof enclosure) U_m: 250 VRMS / U_o: 34.33 VDC / I_o: 112.007 mA / P_o: 961.3 mW / L_o: 1.0 mH / Co: 0.37 μF
	Temperature	-30°C -22°F ≤ Ta ≤ 60°C 140°F / -30°C -22°F ≤ Tp ≤ 85°C 185°F (when using an Isolated barrier) ─ (when using a Zener barrier) ─ (when using a Zener barrier with a flameproof enclosure) Explosion-proof enclosure: -30°C -22°F ≤ Ta ≤ 60°C 140°F
ATEX and UKEX	Explosion-proof performance	II 1 G Ex ia IIC T4 Ga or II 1 G Ex ia IIB T4 Ga II 1 D Ex ia IIIC T135°C Da (when using an Isolated barrier) II (1) G [Ex ia Ga] IIC or II (1) G [Ex ia Ga] IIB II (1) D [Ex ia Da] IIIC (when using a Zener barrier) II (1) G [Ex ia Ga] IIB II (1) D [Ex ia Da] IIIC (when using a Zener barrier with a flameproof enclosure) II 2 (1) G Ex db [ia Ga] IIB T4 Gb II 2 (1) D Ex tb [ia Da] IIIC T135°C Db
	Zone	Zone 0/20 (when using an Isolated barrier) Do not install in a hazardous location (associated apparatus^5) (when using a Zener barrier) Do not install in a hazardous location (associated apparatus^5) (when using a Zener barrier with a flameproof enclosure) Zone 1/21
	Electrical ratings	U_i: 35 VDC / I_i: 142.4 mA / P_i: 1000 mW / L_i: 26.2 nH / C_i: 79 nF (when using an Isolated barrier) U_m: 250 VRMS / U_o: 26.78 VDC / I_o: 115.307 mA / P_o: 772 mW / L_o (IIC): 0.2 mH / C_o (IIC): 0.092 μF / L_o (IIB): 0.2 mH / C_o (IIB): 0.72 μF (when using a Zener barrier) U_m: 250 VRMS / U_o: 34.33 VDC / I_o: 112.007 mA / P_o: 961.3 mW / L_o: 1.0 mH / Co: 0.37 μF (when using a Zener barrier with a flameproof enclosure) U_m: 250 VRMS / U_o: 34.33 VDC / I_o: 112.007 mA / P_o: 961.3 mW / L_o: 1.0 mH / Co: 0.37 μF
	Temperature	-30°C -22°F ≤ Ta ≤ 60°C 140°F / -30°C -22°F ≤ Tp ≤ 85°C 185°F (when using an Isolated barrier) ─ (when using a Zener barrier) ─ (when using a Zener barrier with a flameproof enclosure) Explosion-proof enclosure: -30°C -22°F ≤ Ta ≤ 60°C 140°F
Type Approval of Electrical Equipment for Use in Explosive Atmospheres	Explosion-proof performance	Ex ia IIC T4 Ga or Ex ia IIB T4 Ga Ex ia IIIC T135°C Da (when using an Isolated barrier) [Ex ia Ga] IIC or [Ex ia Ga] IIB [Ex ia Da] IIIC (when using a Zener barrier) [Ex ia Ga] IIB [Ex ia Da] IIIC (when using a Zener barrier with a flameproof enclosure) Ex db [ia Ga] IIB T4 Gb Ex tb [ia Da] IIIC T135°C Db
	Zone	Zone 0/20 (when using an Isolated barrier) Do not install in a hazardous location (associated apparatus^5) (when using a Zener barrier) Do not install in a hazardous location (associated apparatus^5) (when using a Zener barrier with a flameproof enclosure) Zone 1/21
	Electrical ratings	U_i: 35 VDC / I_i: 142.4 mA / P_i: 1000 mW / L_i: 26.2 nH / C_i: 79 nF (when using an Isolated barrier) U_m: 250 VRMS / U_o: 26.78 VDC / I_o: 115.307 mA / P_o: 772 mW / L_o (IIC): 0.2 mH / C_o (IIC): 0.092 μF / L_o (IIB): 0.2 mH / C_o (IIB): 0.72 μF (when using a Zener barrier) U_m: 250 VRMS / U_o: 34.33 VDC / I_o: 112.007 mA / P_o: 961.3 mW / L_o: 1.0 mH / Co: 0.37 μF (when using a Zener barrier with a flameproof enclosure) U_m: 250 VRMS / U_o: 34.33 VDC / I_o: 112.007 mA / P_o: 961.3 mW / L_o: 1.0 mH / Co: 0.37 μF
	Temperature	-30°C -22°F ≤ Ta ≤ 60°C 140°F / -30°C -22°F ≤ Tp ≤ 85°C 185°F (when using an Isolated barrier) ─ (when using a Zener barrier) ─ (when using a Zener barrier with a flameproof enclosure) Explosion-proof enclosure: -30°C -22°F ≤ Ta ≤ 60°C 140°F
NRTL/ACO	Explosion-proof performance	Class I, Zone 0, AEx ia IIC T4 Ga/Zone 20, AEx ia IIIC T135°C Da/Class I, Division 1, Groups A, B, C, D, T4/Class II, Division 1, Groups E, F, G, T135°C/Class III, Division 1 or Class I, Zone 0, AEx ia IIB T4 Ga/Zone 20, AEx ia IIIC T135°C Da/Class I, Division 1, Groups C, D, T4/Class II, Division 1, Groups E, F, G, T135°C /Class III, Division 1 (when using an Isolated barrier) [AEx ia Ga] IIC or [AEx ia Ga] IIB/[AEx ia Da] IIIC Intrinsically safe circuit for Class I, Division 1, Groups A, B, C, D or Class I, Division 1, Groups C, D/Class II, Division 1, Groups E, F, G/Class III, Division 1 (when using a Zener barrier) [AEx ia Ga] IIB/[AEx ia Da] IIIC Intrinsically safe circuit for Class I, Division 1, Groups C, D/Class II, Division 1, Groups E, F, G/Class III, Division 1 (when using a Zener barrier with a flameproof enclosure) Class I, Zone 1, AEx db [ia Ga] IIB T4 Gb/Zone 21, AEx tb [ia Da] IIIC T135°C Db/Class I, Division 1, Groups C, D, T4/Class II, Division 1, Groups E, F, G, T135°C /Class III, Division 1
	Zone/Division	Zone 0/20 Division 1 (when using an Isolated barrier) Do not install in a hazardous location (associated apparatus^5) (when using a Zener barrier) Do not install in a hazardous location (associated apparatus^5) (when using a Zener barrier with a flameproof enclosure) Zone 1/21 Division 1
	Electrical ratings	U_i: 35 VDC / I_i: 142.4 mA / P_i: 1000 mW / L_i: 26.2 nH / C_i: 79 nF (when using an Isolated barrier) U_m: 250 VRMS / U_o: 26.78 VDC / I_o: 115.307 mA / P_o: 772 mW / L_o (IIC): 0.2 mH / C_o (IIC): 0.092 μF / L_o (IIB): 0.2 mH / C_o (IIB): 0.72 μF (when using a Zener barrier) U_m: 250 VRMS / U_o: 34.33 VDC / I_o: 112.007 mA / P_o: 961.3 mW / L_o: 1.0 mH / Co: 0.37 μF (when using a Zener barrier with a flameproof enclosure) U_m: 250 VRMS / U_o: 34.33 VDC / I_o: 112.007 mA / P_o: 961.3 mW / L_o: 1.0 mH / Co: 0.37 μF
	Temperature	-30°C -22°F ≤ Ta ≤ 60°C 140°F / -30°C -22°F ≤ Tp ≤ 85°C 185°F (when using an Isolated barrier) ─ (when using a Zener barrier) ─ (when using a Zener barrier with a flameproof enclosure) Explosion-proof enclosure: -30°C -22°F ≤ Ta ≤ 60°C 140°F
Enclosure rating		IP67 (IEC60529), Enclosure Type 4X (NEMA250) (when using an Isolated barrier) Barrier: Not specified (when using a Zener barrier) Barrier: Not specified (when using a Zener barrier with a flameproof enclosure) Explosion-proof enclosure : IP67 (IEC60529) Enclosure Type 4X (NEMA250)
Protection circuit		Reverse power connection protection, power supply surge protection
Weight		Approx. 920 g 32.45 oz (when using an Isolated barrier) Barrier: Approx. 320 g 11.28 oz (when using a Zener barrier) Barrier: Approx. 100 g 3.52 oz (when using a Zener barrier with a flameproof enclosure) Flameproof enclosure + barrier (without cable glands): Approx. 1300 g 45.85 oz
^1 Guaranteed value in water with the recommended installation. In still water, measurement is possible with water up to the edge of the lens. An undetectable area is present at short range due to the environment and measurement medium. The maximum measuring range is also reduced. ^2 Measurement may not be possible depending on the environment and shape of the target. ^3 Guaranteed value from verification performed at KEYENCE inspection facilities. Measurement errors may occur depending on the customer’s environment. ^4 Guaranteed value from verification performed at KEYENCE inspection facilities with a load resistance of 250 Ω. Measurement errors may occur depending on the customer’s environment. ^*5 Associated apparatus are devices that comprise both intrinsically safe and non-intrinsically safe circuits. The FR-LEX20L meets the requirements for intrinsically safe construction when used in conjunction with associated apparatus.

Keyence OP-42168 Keyence

€0,00

Sold Out

Specifications

Model				OP-42168
Type				Front-mounting bracket
Applicable product				MS-H50
Note				Includes 2 screws (M3) for mounting the main unit
Weight				Approx. 75 g

Keyence OP-87729 Keyence

€0,00

Sold Out

Specifications

Model				OP-87729
Type				Protection sheet for a display panel

Keyence LV-H52 Keyence

€347,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X482F Keyence

€4.346,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FS-V11 Keyence

€139,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-84266 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89247 Keyence

€0,00

Sold Out

Specifications

Model				OP-89247
Length				1.5 m 4.9'