Machine Vision Systems

€0,00

Sold Out

Specifications

Model		ER-12N
Type		Ultra-long distance shielded type Screw type M12 Cable NPN output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	10 mm 0.39" ±10% ^*2
	With distance switching (Mode 2)	6 mm 0.24" ±10% ^*2
Response frequency	With default settings (Mode 1)	30 Hz ^3 ^4
	With distance switching (Mode 2)	100 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 50 mA or less for 1 output, or 50 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Button: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 75 g 2.65 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence IV4-G600CA Keyence

€1.989,95

Only 5 units left

Specifications

Model		IV4-G600CA
Type		Wide field of view model
Installed distance		From 50 mm 1.97"
Field of view		Installation distance 50 mm 1.97": 51 (H) × 38 (V) mm to Installation distance 3000 mm 118.11": 2730 (H) × 2044 (V) mm (reference value)
Image receiving element	Type	1/2.9 inch color CMOS
	Number of pixels	1280 (H) × 960 (V)
Focus adjustment		Auto ^*1
Exposure time		12 μs to 9 ms ^*2
Lights	Illumination	White LED
	Lighting method	Switchable between pulse and continuous lighting
Indicators		2 indicators (both displaying same content)
Power supply	Average power consumption	2.5 W (without AI imaging illumination unit installed) 6.6 W (with AI imaging illumination unit installed)
Environmental resistance	Enclosure rating	IP67 ^*3
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing) ^*4
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	Frequency: 10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² 3 times in each of 6 directions
Material		Main unit case: Zinc die-casting. Front cover: Acrylic. Operation indicator cover: TPU ^*5
Weight		Approx. 75 g 2.65 oz (no AI imaging illumination unit) Approx. 225 g 7.94 oz (with AI imaging illumination unit)
^1 Focus position can be automatically adjusted during installation. It cannot be adjusted while running. Focus position can be registered separately for each program. ^2 Maximum exposure time is 500 ms only when lighting is set to OFF. ^3 Except when polarizing filters (OP-88642/OP-88643/OP-88646/OP-88647) are installed. ^4 When the operating ambient temperature exceeds 40°C 104°F, install in accordance with KEYENCE instructions, taking appropriate measures for heat dissipation to ensure that the case temperature does not exceed the rated 65°C 149°F. For the case temperature, measure the side with the “IV4 series” label. ^*5 ESD safe and IEC61340-5-1 compliant.

Keyence SJ-E132H Keyence

€0,00

Sold Out

Specifications

Model		SJ-E132H
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 V
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±30 V^*1
Installation distance		50 to 2000 mm 1.97" to 78.74"
Control input	Static elimination stop input	NPN open collector or contact point signal without voltage
Control output	Ion level warning, condition warning, alarm output	NPN open collector, Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Communication function		Remote control communication
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc 1/8
Air supply pressure		0.1 MPa to 0.5 MPa^*2 (recommended air pressure of 0.2 MPa)
Effective length		1380 mm 54.33"^*3
Total length		1280 mm 50.39"
No. ofelectrodes		41
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	700 mA (at 24 V), 500 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		1550 g 54.67oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" or more, Air supply pressure: 0.2 Mpa, Frequency: The highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^*3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence OP-89140 Keyence

€0,00

Sold Out

Specifications

Model		OP-89140
Type		Standard ^1 ^2
Sensor side	Connector size	M12 4-pin
	Appearance	Straight
Cable connector	Connector size	M12 4-pin
	Appearance	Straight
Length		2 m 6.6'
Material		Cable: PVC, Connector: Nickel-plated brass
Weight		Approx. 95 g 3.35 oz
^1 Use a heat/cleaning-resistant cable for the weld-resistant all-metal type in environments of 80°C 176°F or higher and for the environment-resistant all-metal type in environments of -25°C -13°F or lower or at 80°C 176°F or higher. ^2 When used with the general-purpose all-metal type or the environment-resistant all-metal type, the enclosure rating is IP67.

Keyence CA-H035C Keyence

€1.850,95

Only 7 units left

Specifications

Model		CA-H035C
Image element		Color CMOS, 7×/16× high-speed reading using square-pixel
Unit cell size		6.9 µm × 6.9 µm 0.27 Mil × 0.27 Mil
Valid pixel count		0.31 megapixel mode: 640 (H) × 480 (V), 0.24 megapixel mode: 512 (H) × 480 (V)
Image size		Equivalent to 1/3"
Scanning system		Progressive At 7× transfer speed: 4.8 ms^1, At 16× transfer speed: 2.9 ms^2
Pixel transfer frequency		At 7× transfer speed: 86 MHz (43 MHz × 2)^1, At 16× transfer speed: 198 MHz^2
Transfer system		Digital serial transfer
Electronic shutter		Can be set to 0.05 to 9000 msec by specifying the following numerical inputs: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000
Lens mount		C-mount
Enclosure rating		IP64^*3
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F
	Relative humidity	85% RH or less
Weight		Approx. 75 g (not including lens)
^1 Transfer speed setting: Standard ^2 Transfer speed setting: Fast ^*3 A KEYENCE-specified IP64-rated lens and environment-resistant cable must be used on the product.

Keyence NR-TH08 Keyence

€1.085,95

Only 9 units left

Specifications

Model		NR-TH08 ^*1
Type		High-accuracy temperature/voltage measurement unit
Input method		Floating unbalanced input, channels insulated from each other, CH inputs insulated from other units (PC), channels not insulated from each other for resistance thermometers
Number of channels		Input: 8 ^*2
Measurement cycle		Fastest sampling cycle: 100 ms (A/D integration time: 2 ms) to 1 h
A/D converting system		Delta-sigma method
A/D resolution		24 bit
A/D integration time		2 ms, 16.7 ms, 20 ms
Input type		Voltage: ±50 V, ±10 V, ±5 V, ±1 V, ±0.5 V, ±0.1 V; Thermocouple; K, J, E, T, R, S, B, N, C; Resistance thermometer: Pt100, JPt100 3-line type; Specified current: 1 mA
Measurement range	±50 V	Measurable range: −55.00 to +55.00 V Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±2 digits Display resolution: 10 mV
	±10 V	Measurable range: −11.000 to +11.000 V Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±2 digits Display resolution: 1 mV
	±5 V	Measurable range: −5.500 to +5.500 V Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±2 digits Display resolution: 1 mV
	±1 V	Measurable range: −1.1000 to +1.1000 V Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±2 digits Display resolution: 0.1 mV
	±500 mV	Measurable range: −550.0 to +550.0 mV Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±2 digits Display resolution: 0.1 mV
	±100 mV	Measurable range: −110.00 to +110.00 mV Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±2 digits Display resolution: 0.01 mV
	K	Measurable range: −100 to +1372°C -148°F to +2501.6°F, −200 to −100°C -328°F to -148°F Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±0.6°C ±1.1°F, ±0.05% of rdg ±0.9°C ±1.6°F Display resolution: 0.05°C 0.09°F ^*3
	J	Measurable range: −100 to +1200°C -148°F to +2192°F, −200 to −100°C -328°F to -148°F Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±0.6°C ±1.1°F, ±0.05% of rdg ±0.8°C ±1.4°F Display resolution: 0.05°C 0.09°F ^*3
	E	Measurable range: −100 to +1000°C -148°F to +1832°F, −200 to −100°C -328°F to -148°F Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±0.6°C ±1.1°F, ±0.05% of rdg ±0.8°C ±1.4°F Display resolution: 0.05°C 0.09°F ^*3
	T	Measurable range: −100 to +400°C -148°F to +752°F, −200 to −100°C -328°F to -148°F Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±0.5°C ±0.9°F, ±0.05% of rdg ±0.8°C ±1.4°F Display resolution: 0.01°C 0.02°F ^*3
	N	Measurable range: 0 to 1300°C 32°F to 2372°F Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±0.6°C ±1.1°F Display resolution: 0.05°C 0.09°F ^*3
	C	Measurable range: 1500 to 2315°C 2732°F to 4199°F, 0 to 1500°C 32°F to 2732°F Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±1.1°C ±2.0°F, ±0.05% of rdg ±0.8°C ±1.4°F Display resolution: 0.05°C 0.09°F ^*3
	R	Measurable range: 300 to 1768°C 572°F to 3214.4°F, 0 to 300°C 32°F to 572°F Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±0.8°C ±1.4°F, ±0.05% of rdg ±1.6°C ±2.9°F Display resolution: 0.05°C 0.09°F ^*3
	S	Measurable range: 300 to 1768°C 572°F to 3214.4°F, 0 to 300°C 32°F to 572°F Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±0.9°C ±1.6°F, ±0.05% of rdg ±1.6°C ±2.9°F Display resolution: 0.05°C 0.09°F ^*3
	B	Measurable range: 400 to 600°C 752°F to 1112°F, 600 to 1820°C 1112°F to 3308°F Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.05% of rdg ±1.7°C ±3.1°F, ±0.05% of rdg ±1.0°C ±1.8°F Display resolution: 0.05°C 0.09°F ^*3
	Pt100	Measurable range: −200 to +660°C -328°F to +1220°F Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.1% of rdg ±0.3°C ±0.5°F Display resolution: 0.02°C 0.04°F ^*4
	JPt100	Measurable range: −200 to +510°C -328°F to +950°F Measurement accuracy (A/D integration time: 16.7 ms, 20 ms): ±0.1% of rdg ±0.3°C ±0.5°F Display resolution: 0.02°C 0.04°F ^*4
Reference contact compensation		Switchable between internal and external (individual unit setting, 0°C 32°F for external)
Reference contact compensation accuracy		±0.7°C ±1.3°F (23°C ±2°C 73.4°F ±3.6°F, at input terminal temperature equilibrium)
Maximum input voltage		±60 V (rated)
Input impedance	Thermocouple, Voltage: 5 V range or lower	10 MΩ or more
	Voltage: 50 V, 10 V range	Approx. 1 MΩ
Withstand voltage	Measurement input terminal - System bus	1500 VAC (50/60 Hz) for 1 minute
	Mutually between measurement input terminals	120 Vp-p AC/DC
Input signal source resistance	Voltage/thermocouple	2 kΩ or less
	Resistance thermometer	10 Ω or less per line (three lines must be equal)
Thermocouple burnout		Wire breakage detected in the thermocouple range by applying 1 μA of current
Burnout detection frequency		Detected in the measurement cycle
Buffer memory		200k data
Warm up time		30 minutes or more^*5
Rating	Power consumption	1.2 W or less
Environmental resistance	Ambient temperature	0 to +40°C 32°F to 104°F
	Relative humidity	10 to 85% RH (no condensation)
Weight		Approx. 230 g 8.12 oz (including approx. 100 g 3.53 oz for the OP-51582 (NR-TH08 terminal block))
^1 The above specifications are the values when zero point adjustment is performed after the warm-up period in an environment with a temperature of 23°C ±3°C 73.4°F ±5.4°F. ^2 Max. expansion: 576 ch (with 72 units connected, using NR-X100W), 64 ch (with 8 units connected, using NR-500) ^3 Does not include reference junction compensation accuracy. ^4 Specified current: 1 mA ^*5 45 minutes or more when 5 or more units are added.

Keyence PJ-V21T Keyence

€925,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-7F Keyence

€111,95

In stock, 11 units

Specifications

Model		FU-7F^*1
Optical axis diameter (Standard target to be detected)		ø1 mm 0.04"
Size		M4
Fibre unit length		2 m 6.56', Free-cut
Fibre unit diameter		ø2.2 ø0.09"
Shape		Threaded
Minimum bend radius		R25 mm R0.98"
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 21 g
^*1 For details on the detecting distance, see the fiber amplifier catalog.

Keyence OP-87931 Keyence

€157,95

In stock, 12 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FI-CDB1 Keyence

€0,00

Sold Out

Specifications

Model				FI-CDB1
Material				SUS304/SUSXM7
Weight				Approx. 440 g

Keyence VS-C2500MX Keyence

€0,00

Sold Out

Specifications

Model		VS-C2500MX
Storage	Internal storage	7 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Image size	1.1"
	Pixel size	2.5 μm 0.10 Mil
	Frame rate	28 fps
Lens	Mount	C-mount
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1
Functions	Output image pixels	5120 × 5120
	Exposure time	0.008 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*2
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		93.2 mm × 52.6 mm × 66 mm 3.67" × 2.07" × 2.60"
Case temperature		0°C to 65°C 32 to 149°F ^*3
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*4
Weight		Approx. 420 g 14.83 oz
^1 Using the configuration software, format the media before use. ^2 Maximum instantaneous current. Average current is below current consumption (including lighting). ^3 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^4 ESD-Safe, IEC61340-5-1 compliant.

Keyence FT-55AWP Keyence

€454,95

Only 4 units left

Specifications

Model		FT-55AWP
Type		Panel mounting type
Power voltage		12 to 24 VDC, Ripple (P-P)10% max.
Power consumption	Normal	1400 mW (For 12 V), 1600 mW (For 24 V)
	Eco mode	1150 mW (For 12 V), 1350 mW (For 24 V)
Display method		4 + 1/two-digit 7-segment LED, dual-display (red/green) display (character height in the upper display (red): 8 mm 0.31", character height in the lower display (green): 5.7 mm 0.22"), Display updating cycle: 10/s
Operation indicator		Red LED x 3 (control output1/control output2/timing input indicator)
Display resolution		0.2°F or 1.8°F (0.1°C or 1°C) (when using H10/H20/H30), 1.8°F (1°C) (when using H50/H40K/H50K)
Hysteresis		Variable
Response speed		HSP, 30, 100, 200, 500, 1000, or 5000 ms can be selected (In HSP: 15 ms max.)
Bank selection		Pink and Purple wires can be configured for Bank Inputs #1,2 respectively for up to 4 total banks.
Bank specifications		Emissivity (valid in temperature mode) and limit settings x 2 can be set for each bank.
External input	Timing input	Input time: 2 ms min.
	Bank input	Input time: 20 ms min.
Control output		PNP open collector x 2 channels (N.O./N.C. selectable), 50 mA max. 30 VDC max., residual voltage: 1 V max.
Analog output		4 to 20 mA, maximum load resistance: 260 Ω The upper- and lower-limit values of the analog output range can be set optionally.
Environmental resistance	Ambient temperature	-14 to +122°F (-10 to +50°C), No freezing ^*1
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
Material		Main unit, Cover: Polycarbonate, Keycaps: Polyester elastomer, Cable: Vinyl chloride Panel mounting bracket: Polyacetal, front protection cover: Polycarbonate
Accessory		Panel mounting bracket, protection cover, power cable, unit cover sticker
Weight		Approx. 85g
^*1 Ambient temperature when using the analog output is 14 to 113°F (-10 to 45°C) .

Keyence FU-22 Keyence

€0,00

Sold Out

Specifications

Model		FU-22
Detecting method		Focused-beam
Fibre unit length		50 cm19.685" cannot be cut
Minimum bend radius		R25 mm0.984"
Detection distance		7 mm0.276"^*1
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 4 g
^*1 The detecting distance is a value for white mat paper (the standard detection object) detections.

Keyence MP-F10ADM Keyence

€0,00

Sold Out

Specifications

Model				MP-F10ADM
Type				Auto drain cup
Connection diameter				NPT3/8 (10A)
Material				Metal

Keyence OP-5011 Keyence

€309,95

Only 3 units left

Buy the Keyence OP-5011 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence OP-5011 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence FD-G25 Keyence

€1.140,95

Only 9 units left

Specifications

Model			FD-G25
Pipe size	DN (Diameter Nominal)		20 A, 25 A
	NPS (Nominal Pipe Size)		3/4", 1"
	Outer diameter of pipe		ø25 to 29 mm 0.98" to 1.14", ø32 to 36 mm 1.26" to 1.42"
	Pipe thickness		2.0 to 4.5 mm 0.08" to 0.18"
Supported pipe materials			Iron, steel, stainless steel
Supported fluids			Air, Nitrogen, other gases^*1
Fluid temperature			0 to 60ºC 32 to 140 °F
Recommended pressure			0.4 MPa or greater (58 PSI or greater)
Rated velocity of flow range			Up to 15 m/s
Actual flow rate range (typical)	m³/h		Pipe size 20 A: 20.00 Pipe size 25 A: 32.00
	L/min		Pipe size 20 A: 330.0 Pipe size 25 A: 540.0
	CFM		Pipe size 20 A: 12.00 Pipe size 25 A: 19.00
Standard flow rate range (typical) [CFM]	20°C 68°F 60 psi 0.41 MPa		Pipe size 20 A: 56.84 Pipe size 25 A: 90.00
	20°C 68°F 80 psi 0.55 MPa		Pipe size 20 A: 72.06 Pipe size 25 A: 114.10
	20°C 68°F 100 psi 0.69 MPa		Pipe size 20 A: 87.28 Pipe size 25 A: 138.20
	20°C 68°F 120 psi 0.83 MPa		Pipe size 20 A: 102.50 Pipe size 25 A: 162.30
Display			QVGA 2.2" LCD color monitor
Display update cycle			Approx. 3 Hz
Display resolution	Instantaneous flow rate		0.01 m³/h, 0.1 L/min, 0.001 CFM
	Consumption/leakage amount		0.001 m³, 1 L, 0.1 CF
Response time			1.0 s/2.5 s/5.0 s/10.0 s/30.0 s/60.0 s/120.0 s/200.0 s (variable)
Measurement accuracy	Between 10 and 100% of F.S.		±2.0% of RD^2^3^4^5
	Between 1 and 10% of F.S.		±1.0% of F.S.^2^3^4^5
Zero point error			±0.15% of F.S.^2^6
Static leakage repeatability			±1.0% of RD^4^7
Hysteresis			Variable
Flow units			CFM(S), CFM, m³/h (N), m³/h (S), m³/h, L/min (N), L/min (S), L/min
I/O wiring connection port			M12 4-pin connector (male)
Detection mode (switchable)	ch.1		Instantaneous flow mode/area mode/pulse (+) mode/integrated flow mode/warning mode (consump)^*8
	ch.2		Instantaneous flow mode/area mode/pulse (−) mode/warning mode (leak)/error output mode/analog output/integrated flow reset/flow rate zero input/origin adjustment input^*8
Standard I/O (switchable)	Control output (ch.1/ch.2)		NPN/PNP setting switchable, open collector output 30 VDC or less, max. 100 mA/ch, residual voltage: 2.5 V or less
	Analog output (ch.2)		4 to 20 mA/0 to 20 mA, load resistance: 500 Ω or less
	External input (ch.2)		Short-circuit current: 1.5 mA or less, input time: 20 ms or more
Protection circuit			Power supply reverse connection protection, power supply surge protection, short-circuit protection for each output, surge protection for each output
Analog input (for volume conversion)			M8 4-pin connector (female), analog current input (4 to 20 mA), input resistance: 100Ω or less
Power supplied to pressure sensor			Supply voltage: Equivalent to voltage applied to the FD-G, Supply current:70 mA or less (analog output of the pressure sensor included)
Communication interface	USB		USB 2.0
	Ethernet	Standard	IEEE 802.3u (100BASE-TX)
		Transmission rate	100 Mbps
		Cable	Category 5 or higher STP (shielded twisted pair) or UTP (unshielded twisted pair) cable
		Connector	M12 connector (female, D-code)
Network function			Modbus TCP, EtherNet/IP™, IO-Link^*9
Recording capacity	Consumption amount/ leakage amount		Approx. 5 years
	Events		100
Power supply	Power voltage		20 to 30 VDC including 10% ripple (P-P), Class 2
	Power consumption		350 mA or less at 20 V, 290 mA or less at 24 V, 230 mA or less at 30 V (load current excluded) (analog output of the pressure sensor excluded), 550 mA or less at 20 V, 490 mA or less at 24 V, 430 mA or less at 30 V (Maximum load current excluded) (analog output of the pressure sensor excluded)
Environmental resistance	Enclosure rating		IP65/67 (IEC 60529)^*10
	Ambient temperature		Detection head: −10 to +60°C 14 to 140°F (no freezing), display unit: −10 to +55°C 14 to 131°F (no freezing)
	Relative humidity		5 to 85%RH (no condensation)
	Vibration resistance		10 to 500 Hz, power spectral density: 0.816 G²/Hz, XYZ axes
	Shock resistance		100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material	Display unit		Body: PBT + coating, display: PMMA, Power supply port: SUS304-equivalent, Ethernet port: zinc nickel plating
	Detection head		Body: PPS/SUS304, rear surface: rubber
	Mounting/damping bracket		SUS304
Weight			Approx. 2.2 kg
^1 The gas must be uniform and capable of transmitting ultrasonic waves. Measurement may be unstable due to the pressure inside of the pipe and the type of gas. ^2 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by factors such as the type and status of the pipe and the type and temperature of the gas. ^3 This is the value when considering linearity + span error in a stable environment with a temperature of 25°C 77°F. ^4 Defined with stable velocity of flow distribution. Does not include pulsations and fluctuations in the velocity of flow distribution primarily attributable to the equipment. ^5 The linearity error characteristic due to the pipe is not included in this value. ^6 It is possible to reduce zero point errors by performing an origin adjustment. ^7 This is the value within the range where measurement accuracy is guaranteed. ^8 When Bi-directional is specified, the following functions cannot be used. The selection of the comparison view/leak ratio view/static leakage, the measurement/display of the leakage amount/integrated flow, the setting of the target value/warning set value, and money conversions. Also, the I/O settings are limited as shown below. • ch.1: Pulse(+) mode • ch.2: Pulse(-) mode, Error output mode, Integrated flow reset, Flow zero input, Origin adjustment input ^9 IO-Link: Compatible with specification v1.1/COM1 (4.8 kbps). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^10 The IP65/67 enclosure rating is lost when a USB connection is established.

Keyence EV-118MSO(2063) Keyence

€0,00

Sold Out

Specifications

Model		EV-118MSO (2063)
Type		Shielded
Shape		M18
Detecting distance		5 mm 0.20" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		18 x 18 mm 0.71" x 0.71"
Hysteresis		10% max. of detecting distance
Response frequency		350 Hz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -25 to +70°C -13 to +158°F
Control output (switching capacity)		5 to 200 mA
Protection circuit		Reversed polarity, short-circuit, surge voltage
Cable length		500 mm19.685"
Rating	Power voltage	12 to 24 VDC
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Case material		Nickel-plated brass
Weight		Approx. 95 g

Keyence CC-N1 Keyence

€0,00

Sold Out

Specifications

Model		CC-N1
Ethernet	Number of ports	4
	Connector	M12 X-coded 8-pin female connector
	Standard	100BASE-TX
	Supported protocols	EtherNet/IP™ ^1, PROFINET CC-B ^2, and OPC UA server
Power supply	Connector	M12 L-coded 5-pin male connector
	Voltage	24 VDC ±10%
	Current consumption ratings	Max: 4.5 W, Typ.: 3.6 W
Others	Weight	Approx. 600 g
	Size (H × W × D)	6.94” × 3.17” × 1.71” 176.4 mm × 80.4 mm × 43.4 mm (excluding connector protrusions)
	Enclosure rating	IP67
	Material	Main unit case: Aluminum die-casting
	Storage temperature	14 to 131°F -10℃ to +55℃ (no freezing)
	Ambient temperature	32 to 104°F 0℃ to +40℃
	Operating ambient humidity	85% RH or less (no condensation)
	Standard certifications	EU Directives (EMC Directive, Low Voltage Directive, RoHS Directive) / EN61010-1, EN55011, EN61000-6-2, EN63000, EN61326-1, EN62471, Risk Group 1 / CAN / CSA C22.2 No.61010-1, UL61010-1 / FCC Part 15B, ICES-001 Class A / China RoHS / UKCA
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC 60068-2-64)
	Shock resistance	50 G 6 different directions in 3 times (IEC 60068-2-27)
^1 Supports DLR. ^2 Supports MRP.

Keyence KV-DA4 Keyence

€595,95

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X270A Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88218 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence BL-500H Keyence

€1.306,95

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XM-P2000 Keyence

€0,00

Sold Out

Specifications

Model		XM-P2000 ^*1
Type		Probe
Marker	No. of markers	12
Housing material	Marker body	Quartz glass
	Probe housing	PBT plastic
Light source		Near-infrared LED (870 nm)
Applicable stylus		M5 (Commercially available styluses can be used)
Camera		Compact CMOS image sensor
Status LED		Green: Measurement possible Red: Measurement impossible Off: Not selected
Weight		Approx. 500 g (including cable)
^*1 Included with XM-2000, XM-T2000, XM-2200, and XM-T2200 models.

Keyence OP-25431 Keyence

€0,00

Sold Out

Specifications

Model				OP-25431
Type				Fittings
Overview				Mounting bracket for FSｰT1/M1 and PS-T1.
Applicable product				FSｰT1/M1/V11/V21, PS-T1, AP-V41, LV-11S, ES-M1/M2
Material				Polyacetal