Keyence

MD-X2520A Keyence

Specifications

Model		MD-X2520A
Type		Marking unit (controller + head) 25 W Wide area
Software		MB-PH1 ^*1 (Marking Builder Plus, Marking Diagnostic Tool)
HMI console		MC-P1
3D function add-in (sold separately)		MD-AD-3D
XY tracking add-in (sold separately)		MD-AD-XYT
Z tracking add-in (sold separately)		MD-AD-ZT
2D code reader add-in (sold separately)		MD-AD-2DR/MD-AD-2DRA
Marking method		XYZ 3-Axis simultaneous scanning method
Marking laser		YVO₄ laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA(CDRH) Part 1040.10) ^*2
Marking laser	Wavelength	1064 nm
	Output	25 W
Q-switch frequency		CW (continuous wave), 1 to 400 kHz
Distance laser		Semiconductor laser Wavelength: 683 nm Output: 5.0 mW Class 3R laser product (IEC60825-1, JIS6802, FDA (CDRH) Part1040.10) ^*2
Guide laser/working distance pointer		Semiconductor laser, wavelength: 655 nm output: 1.0 mW Class 2 Laser Product (IEC60825-1, JIS6802, FDA(CDRH) Part 1040.10) ^*2
Marking area		330 × 330 × 42 mm 12.99" × 12.99" × 1.65"
Standard working distance (±variable width)		300 mm (±21 mm) 11.81" (±0.83")
Marking resolution		5 μm
Scan speed		Max. 8000 mm/s 314.96"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font ^*3
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/ GS1 DataBar Limited/GS1 DataBar Limited CC-A/GS1 DataBar Truncated/GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary marking, Moving marking (constant, encoder)
	Character size (height/width)	0.1 to 330 mm 0.004" to 12.99"
	No. of registered jobs	2000 max.
	No. of setting blocks	256
Input/output		Terminal block I/O, MIL connector I/O, laser safety module control I/O ^*4
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX/10BASE-T) ^*5
Marking head installation direction		All directions
Marking head cable length		4.3 ±0.1 m 14.1' ±0.3'
Cooling method		Forced air cooling
Applicable regulations		EU directives (EMC Directive, Low Voltage Directive, RoHS Directive)/EN standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN50581)/ CSA standards and UL standards (CAN/CSA C22.2 No.61010-1, UL61010-1)/North American regulations (FCC Part 15B, ICES-001 Class A)/China RoHS/UKCA
Rated voltage and power consumption		100 to 240 VAC ±10% 50/60 Hz, 850 VA max.
Environmental resistance	Enclosure rating	IP64 (marking head)
	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Ambient humidity for transport/storage	30 to 85% (no condensation)
	Ambient temperature	0 to 40°C 32 to 104°F
	Relative humidity	30 to 85% (no condensation)
	Overvoltage category	II
	Pollution degree	2
Weight		Controller: 23.0 kg 50.71 lb Marking head: 13.8 kg 30.42 lb Console: 2.0 kg 4.41 lb
^1 Download from the KEYENCE website. Supported operating systems: Windows 11/Windows 10 Languages:English/Japanese/Simplified Chinese/Traditional Chinese/German/Korean/French/Spanish/Thai/Italian. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel]. ^4 Only when the laser safety module (MD-C2A/MD-C2B) is installed. ^*5 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder Plus (ActiveX). The Ethernet port supports communication with Marking Builder Plus (ActiveX), TCP/IP communication, EtherNet/IP™ and PROFINET.

€83.380,95

1-year warranty

FREE WORDWIDE SHIPPING

Est. delivery between and

Condition:

Sealed Surplus

SKU: MD-X2520A-Sealed

Sold out

€0,00

Never Used Surplus

SKU: MD-X2520A

1 verified stock

€83.380,95

Used

SKU: MD-X2520A-Used

Sold out

€0,00

Variant

Quantity:

Need More?

Specifications

Model		MD-X2520A
Type		Marking unit (controller + head) 25 W Wide area
Software		MB-PH1 ^*1 (Marking Builder Plus, Marking Diagnostic Tool)
HMI console		MC-P1
3D function add-in (sold separately)		MD-AD-3D
XY tracking add-in (sold separately)		MD-AD-XYT
Z tracking add-in (sold separately)		MD-AD-ZT
2D code reader add-in (sold separately)		MD-AD-2DR/MD-AD-2DRA
Marking method		XYZ 3-Axis simultaneous scanning method
Marking laser		YVO₄ laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA(CDRH) Part 1040.10) ^*2
Marking laser	Wavelength	1064 nm
	Output	25 W
Q-switch frequency		CW (continuous wave), 1 to 400 kHz
Distance laser		Semiconductor laser Wavelength: 683 nm Output: 5.0 mW Class 3R laser product (IEC60825-1, JIS6802, FDA (CDRH) Part1040.10) ^*2
Guide laser/working distance pointer		Semiconductor laser, wavelength: 655 nm output: 1.0 mW Class 2 Laser Product (IEC60825-1, JIS6802, FDA(CDRH) Part 1040.10) ^*2
Marking area		330 × 330 × 42 mm 12.99" × 12.99" × 1.65"
Standard working distance (±variable width)		300 mm (±21 mm) 11.81" (±0.83")
Marking resolution		5 μm
Scan speed		Max. 8000 mm/s 314.96"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font ^*3
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/ GS1 DataBar Limited/GS1 DataBar Limited CC-A/GS1 DataBar Truncated/GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary marking, Moving marking (constant, encoder)
	Character size (height/width)	0.1 to 330 mm 0.004" to 12.99"
	No. of registered jobs	2000 max.
	No. of setting blocks	256
Input/output		Terminal block I/O, MIL connector I/O, laser safety module control I/O ^*4
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX/10BASE-T) ^*5
Marking head installation direction		All directions
Marking head cable length		4.3 ±0.1 m 14.1' ±0.3'
Cooling method		Forced air cooling
Applicable regulations		EU directives (EMC Directive, Low Voltage Directive, RoHS Directive)/EN standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN50581)/ CSA standards and UL standards (CAN/CSA C22.2 No.61010-1, UL61010-1)/North American regulations (FCC Part 15B, ICES-001 Class A)/China RoHS/UKCA
Rated voltage and power consumption		100 to 240 VAC ±10% 50/60 Hz, 850 VA max.
Environmental resistance	Enclosure rating	IP64 (marking head)
	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Ambient humidity for transport/storage	30 to 85% (no condensation)
	Ambient temperature	0 to 40°C 32 to 104°F
	Relative humidity	30 to 85% (no condensation)
	Overvoltage category	II
	Pollution degree	2
Weight		Controller: 23.0 kg 50.71 lb Marking head: 13.8 kg 30.42 lb Console: 2.0 kg 4.41 lb
^1 Download from the KEYENCE website. Supported operating systems: Windows 11/Windows 10 Languages:English/Japanese/Simplified Chinese/Traditional Chinese/German/Korean/French/Spanish/Thai/Italian. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel]. ^4 Only when the laser safety module (MD-C2A/MD-C2B) is installed. ^*5 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder Plus (ActiveX). The Ethernet port supports communication with Marking Builder Plus (ActiveX), TCP/IP communication, EtherNet/IP™ and PROFINET.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Specifications

Model		MD-X2520A
Type		Marking unit (controller + head) 25 W Wide area
Software		MB-PH1 ^*1 (Marking Builder Plus, Marking Diagnostic Tool)
HMI console		MC-P1
3D function add-in (sold separately)		MD-AD-3D
XY tracking add-in (sold separately)		MD-AD-XYT
Z tracking add-in (sold separately)		MD-AD-ZT
2D code reader add-in (sold separately)		MD-AD-2DR/MD-AD-2DRA
Marking method		XYZ 3-Axis simultaneous scanning method
Marking laser		YVO₄ laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA(CDRH) Part 1040.10) ^*2
Marking laser	Wavelength	1064 nm
	Output	25 W
Q-switch frequency		CW (continuous wave), 1 to 400 kHz
Distance laser		Semiconductor laser Wavelength: 683 nm Output: 5.0 mW Class 3R laser product (IEC60825-1, JIS6802, FDA (CDRH) Part1040.10) ^*2
Guide laser/working distance pointer		Semiconductor laser, wavelength: 655 nm output: 1.0 mW Class 2 Laser Product (IEC60825-1, JIS6802, FDA(CDRH) Part 1040.10) ^*2
Marking area		330 × 330 × 42 mm 12.99" × 12.99" × 1.65"
Standard working distance (±variable width)		300 mm (±21 mm) 11.81" (±0.83")
Marking resolution		5 μm
Scan speed		Max. 8000 mm/s 314.96"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font ^*3
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/ GS1 DataBar Limited/GS1 DataBar Limited CC-A/GS1 DataBar Truncated/GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary marking, Moving marking (constant, encoder)
	Character size (height/width)	0.1 to 330 mm 0.004" to 12.99"
	No. of registered jobs	2000 max.
	No. of setting blocks	256
Input/output		Terminal block I/O, MIL connector I/O, laser safety module control I/O ^*4
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX/10BASE-T) ^*5
Marking head installation direction		All directions
Marking head cable length		4.3 ±0.1 m 14.1' ±0.3'
Cooling method		Forced air cooling
Applicable regulations		EU directives (EMC Directive, Low Voltage Directive, RoHS Directive)/EN standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN50581)/ CSA standards and UL standards (CAN/CSA C22.2 No.61010-1, UL61010-1)/North American regulations (FCC Part 15B, ICES-001 Class A)/China RoHS/UKCA
Rated voltage and power consumption		100 to 240 VAC ±10% 50/60 Hz, 850 VA max.
Environmental resistance	Enclosure rating	IP64 (marking head)
	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Ambient humidity for transport/storage	30 to 85% (no condensation)
	Ambient temperature	0 to 40°C 32 to 104°F
	Relative humidity	30 to 85% (no condensation)
	Overvoltage category	II
	Pollution degree	2
Weight		Controller: 23.0 kg 50.71 lb Marking head: 13.8 kg 30.42 lb Console: 2.0 kg 4.41 lb
^1 Download from the KEYENCE website. Supported operating systems: Windows 11/Windows 10 Languages:English/Japanese/Simplified Chinese/Traditional Chinese/German/Korean/French/Spanish/Thai/Italian. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel]. ^4 Only when the laser safety module (MD-C2A/MD-C2B) is installed. ^*5 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder Plus (ActiveX). The Ethernet port supports communication with Marking Builder Plus (ActiveX), TCP/IP communication, EtherNet/IP™ and PROFINET.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator

MD-X2520A Keyence

Specifications

Specifications

Specifications