Machine Vision Systems

€1.242,95

Only 1 unit left

Specifications

Model			AH-809
Type			Sensor head for high temperatures
Amplifier unit			AS-425K
Shape			Cylindrical, diameter: 9.4
Measuring range			0.5 to 1.0 mm0.02" to 0.039"
Analog output voltage	Output voltage		0.5 to 1.0V
	Straight line range		―
	Impedance		100 Ω
	Resolution		0.4% of F.S.^*1
	Linearity		±4% of F.S.
	Response		3.3kHz (-3dB)
Temperature fluctuation	Sensor head		0.14% of F.S./°C^*2
Temperature characteristics	Amplifier unit		0.1% of F.S./°C^*2
Rating	Power voltage		115/230 VAC ±15 %, 50/60 Hz
	Power consumption		6VA
Environmentalresistance	Enclosure rating	Sensor head	Heat-resistant type^*3
	Operating ambient temperature		-10 to 200°C 14 to 392°F, No condensation
		Amplifier unit	0 to +50°C 32 to 122°F
Environmental resistance	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight	Sensor head		Approx 55g
Weight (including cord)	Amplifier unit		Approx 180 g (including the cable)
^1 The AS-425K full scale is 0.5 to 1.0 mm (0.5 mm) 0.0197" to 0.0394"(0.0197"). The temperature characteristics refer to data when the temperature is in the range of +23 to +200°C +73.4 to +392°F. ^2 When the distance between the sensor head and the target is within 50% of the measurement range. ^*3 The AH-809 is not constructed to be waterproof, so avoid using this product in an environment in which the product will be directly subjected to liquids or steam.

Keyence OP-88088 Keyence

€385,95

Only 3 units left

Specifications

Model				OP-88088
Type				Ethernet extension cable (RJ45)
Length				10 m 32.81'
Weight				Approx. 660 g 23.28 oz

Keyence OP-87158 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LS-3100 Keyence

€5.879,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-R8R Keyence

€577,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-51429 Keyence

€0,00

Sold Out

Specifications

Model				OP-51429
Overview				Reflective tape used with polarized retro-reflective laser sensor (200x20mm).
Applicable product				LV-H62, LV-H64, LV-H65
Material				Polycarbonate, Acrylic adhesive

Keyence EX-416V Keyence

€327,95

Only 6 units left

Specifications

Model		EX-416V^*1
Type		Sensor head
Amplifier unit		NPN: EX-V05 PNP: EX-V05P
Shape		ø14.5 x 20 mm ø0.57" x 0.79" Cylindrical, threaded
Measuring range		0 to 5 mm 0 to 0.20"
Display range		-19,999 to +19,999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		1 μm
Sampling rate		40,000 samplings max./sec. ^*2
Display speed		20 times/sec.
Display power		7-segment 2-color LED
Over-range alarm		±FFFF is displayed.
Control input		NPN open-collector or non-voltage contact (Timing input, Reset input, Auto-zero input, Comparator output disable input, Synchronous input, External setting input)/PNP: Applied voltage; 10 to 30 V
Control output	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
	Signal	NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.) PNP open-collector (HIGH, GO and LOW): 100 mA max. (30 V max.)
	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms
Strobe output		NPN: 100 mA max. (40 V max.)/PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		NPN: 100 mA max. (40 V max.)/PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.C.)
Analog output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*3
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10%, Ripple (P-P): 10% max.
	Current consumption	240 mA max.
Environmental resistance	Ambient temperature	-10 to +60 °C 14 to 140 °F, No freezing
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 75 g (including 3 m 9.8' cable)
^1 The above data was obtained using an iron target (S45C, SS400, t=1 mm 0.04"). When measuring aluminum, copper, or stainless steel targets, refer to the linear characteristics for these materials. ^2 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^*3 When the distance between the sensor head and the target is within 50% of the measuring range.

Keyence FL-CP20 Keyence

€0,00

Sold Out

Specifications

Model				FL-CP20
Total length (at 25 °C)				203
Measurement range (dead zone excluded)				157 (137)^*1
Weight				Approx. 160 g
^*1 Values for water. For oil

Keyence EM-030B Keyence

€670,95

Only 2 units left

Specifications

Model		EM-030B^*1
Type		Shielded
Shape		3 mm 0.12" dia Cylindrical.
Detecting distance		0.6 mm 0.02" ±15%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		5 x 5 mm 0.20"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Control output		NPN: 200 mA (40 V) max., Residual voltage: 1 V max.
Housing		Stainless steel
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*2
	Current consumption	12 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 36 g (including nuts and 2-m 6.6' cable)
^1 The alternative-frequency type of EM-030 ^2 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.

Keyence KV-N14AT Keyence

€373,95

Only 5 units left

Specifications

Model				KV-N14AT
General specifications	Power voltage			100 to 240 VAC (+10%/-15%)
	Operating ambient temperature			0 to 55°C 32 to 131°F (no freezing)^1^2
	Operating ambient humidity			5 to 95%RH (no condensation)^*1
	Operating environment			As little dust and corrosive gas as possible
	Noise immunity			1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case
	Insulation resistance			50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case)
	Output power supply voltage			24 VDC (±10%; output capacity : 0.6 A)
	Storage temperature			−25 to +75°C −13 to +167°F
	Vibration resistance	Intermittent vibration	Frequency: 5 to 9 Hz	Amplitude: 3.5 mm 0.14"^3^4
			Frequency: 9 to 150 Hz	Acceleration: 9.8 m/s² 32.2'/s²^3^4
		Continuous vibration	Frequency: 5 to 9 Hz	Amplitude: 1.75 mm 0.07"^3^4
			Frequency: 9 to 150 Hz	Acceleration: 4.9 m/s² 16.1'/s²^3^4
	Shock resistance			Acceleration: 150 m/s² 492.1'/s², application time: 11 ms, three times in each of the X, Y, and Z directions
	Operating altitude			2000 m 6561.7' or less
	Overvoltage category			AC: II, DC: I
	Pollution degree			2
Performance specifications	Calculation control method			Program storage method
	I/O control method			Refresh method
	Program language			Expanded ladder, KV Script, mnemonic
	Number of instructions			Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions, Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions
	Instruction execution speed			Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum
	Program capacity			8k steps
	Maximum number of attachable I/O units			3
	Maximum number of I/O points			128 (excluding the base unit I/O)
	Input relay/Output relay/Internal auxiliary relay	R		Total of 9600 points 1 bit (R000 to R59915)
	Link relay	B		8192 points 1 bit (B0 to B1FFF)
	Internal auxiliary relay	MR		9600 points 1 bit (MR000 to MR59915)
	Latch relay	LR		3200 points 1 bit (LR000 to LR19915)
	Control relay	CR		1440 points 1 bit (CR000 to CR8915)
	Timer	T		512 points 32 bit (T0 to T511)
	Counter	C		256 points 32 bit (C0 to C255)
	Data memory	DM		32768 points 16 bit (DM0 to DM32767)
	Link register	W		16384 points 16 bit (W0 to W3FFF)
	Temporary memory	TM		512 points 16 bit (TM0 to TM511)
	High-speed counter	CTH		2 points (CTH0 to CTH1), 32-bit automatic reset counter^5 (Input response: 100 kHz per single phase, 50 kHz per phase difference)^6
	High-speed counter comparator	CTC		4 points (CTC0 to CTC3), 32 bits, two points per high-speed counter
	Index register	Z		12 points 32 bit (Z01 to Z12)
	Control memory	CM		9000 points 16 bit (CM0 to CM8999)
	Positioning pulse output			2 axes, Maximum output frequency: 100 kHz
	Base unit I/O			Input: 8 points, output: 6 points, Input common: 1 point, Output common: 1 point
	Number of comments and labels that can be stored in the main unit	Device comment		10000 When a maximum-length ladder program is written with no labels.
		Label		14000 When a maximum-length ladder program is written with no device comments.
	Power off hold function	Program memory		Flash ROM can be rewritten 10000 times
		Device		Nonvolatile RAM^*7
	Self-diagnosis function			CPU error, RAM error, and other problems
Input specifications	Relay number			General input: R000 to R003 (4 points), High-speed A-phase and B-phase input: R004 to R007 (2 channels, 4 points in total)
	Input mode			24 VDC input (open collector)
	Maximum input voltage			26.4 VDC
	Rated input voltage			24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA^*8)
	Minimum ON voltage			19 VDC
	Maximum OFF current			1.5 mA
	Common method			General input: All points/1 common (1 terminal), High-speed A-phase and B-phase input: Shared common for all points (shared with general input)
	Circuit delay time			General input: OFF to ON: Max. 30 μs (Typ. 3.5 μs), ON to OFF: Max. 50 μs (Typ. 15 μs) High-speed A-phase and B-phase input: OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs) ^*9
	Input time constant			Normal: 10 ms, When the HSP instruction is used: 10 μs When CR2305 is turned ON: 10 μs to 10 ms, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.^*9
				Input time constant setting 10 μs: Digital filter 1.6 to 2 μs Input time constant setting 20 μs: Digital filter 9 to 12 μs Input time constant setting 110 μs: Digital filter 90 to 93 μs Input time constant setting 500 μs: Digital filter 300 to 400 μs Input time constant setting 1 ms: Digital filter 800 to 900 μs Input time constant setting 2.5 ms: Digital filter 2.3 to 2.4 ms Input time constant setting 5 ms: Digital filter 4.0 to 4.5 ms Input time constant setting 10 ms: Digital filter 9 to 9.5 ms
	Response frequency			(High-speed A-phase and B-phase input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10%, Duty 50%
Output specifications	Relay number			General output: R504 to R505 (2 points), High-speed output: R500 to R503 (4 points)
	Output mode			MOSFET ^*10
	Rated load			30 VDC, 0.5 A
	Maximum OFF voltage			30 VDC
	Leakage current at OFF			100 μA or less
	Residual voltage at ON			0.8 VDC or less (with 0.5 A output), 0.6 VDC or less (with 0.3 A output)
	Common method			8 to 10 points/1 common
	ON/OFF response time			General output: OFF to ON: 100 μs (load of 1 mA or more), ON to OFF: 200 μs (load of 1 mA or more) High-speed output: OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load)
	Overcurrent protection			Protection provided for each common^*11
	Output frequency			High-speed output: 100 kHz (7 to 100 mA load)
Built-in serial port	Interface	Communication standard		RS-232C
		Connection		Modular connector
	Transmission specifications RS-232C	Baud rate		1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
		Transmission method		Full duplex
		Data format	Start bit	1 bit
			Data bits	7 bits, 8 bits
			Stop bits	1 bit, 2 bits
		Error detection	Parity	Even, odd, none
		Transmission distance		15 m 49.2'
		Number of transmission units		1
	Indication			SD (green), RD (red)
Internal current consumption				75 VA (* The VA values are calculated with a power factor of 30%.)
Weight				Approx. 420 g
^1 The range guaranteed as a system (excluding items specially noted for the units and cassettes). ^2 The temperature below the unit center (30 mm 1.18") inside a control panel. ^3 These specifications correspond to situations in which the unit is mounted on a DIN rail and in which the unit is mounted on the panel directly. ^4 Conforms to JIS B 3502 and IEC61131-2, Scan times: 10 times (100 minutes) in each of the X, Y, and Z directions ^5 You can also configure the settings so that automatic reset is not used. ^6 Only open collectors are supported. Line drivers are not supported. ^7 You can set the target device by clicking “CPU system setting” and then “Power off holding” in KV STUDIO. ^8 Reference value of input current. ^9 The input response time corresponding to the input time constant can be calculated as shown below. (Response time) = (Circuit delay of the input circuit) + (Delay by the digital filter) Example: Maximum response time when the input time constant is set to 500 μs OFF to ON: 30 μs (circuit delay) + 400 μs (digital filter) = 430 μs ON to OFF: 50 μs (circuit delay) + 400 μs (digital filter) = 450 μs ^10 MOSFET (N-ch) output for the sink output type. ^*11 If an overcurrent occurs, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common until the cause of the problem is removed.

Keyence CZ-12 Keyence

€338,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence EX-505W Keyence

€600,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-F2500 Keyence

€2.540,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ER-GL08P Keyence

€0,00

Sold Out

Specifications

Model		ER-GL08P
Type		General-purpose all-metal shielded type Screw type M8 Cable PNP output Long-Range
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*2
Response frequency		80 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence GL-R40H-T Keyence

€3.901,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-L3 Keyence

€952,95

Only 5 units left

Specifications

Model				CV-L3
Focal point				3.5 mm 0.14"
F-stop range (aperture)				F1.6 to CLOSE
Minimum WD				0.1 m 0.3'
Mount				C-mount
Filter size				43.0 mm 1.69" P0.75
Compatible image sensor size				1/2"
TV distortion				-10.0 % (-5.0 %)^*1
Resolving power				100 cycles/mm at center, 40 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Polarizing filter				OP-87894
Protective filter				CA-LF43
Weight				Approx. 90 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence GS-P12L3 Keyence

€301,95

Only 2 units left

Specifications

Model				GS-P12L3
Type				Standard (L-shaped)
Length				3 m 9.8'
Weight				Approx. 170 g 6.00 oz

Keyence SV3-500L2 Keyence

€0,00

Sold Out

Specifications

Model				SV3-500L2
General specifications	Capacity			5.0 kW
	Input power supply	Voltage/frequency	Main circuit	3-phase (or single-phase^1) 200 to 240 VAC (-15%/+10%), 50/60 Hz, 270 to 324 VDC^2
			Control circuit	Single-phase 200 to 240 VAC (-15%/+10%), 50/60 Hz, 270 to 324 VDC^*2
		Allowable frequency fluctuation	Main circuit/control circuit	±5% max.
		Overvoltage category		III
	Control mode			Three-phase full-wave rectification, IGBT, PWM control, Sine wave current drive system
	Feedback			Serial encoder (absolute) communication, Fully closed control serial communication, Analog feedback
	Operating environment	Operating atmosphere	Enclosure rating	IP20:SV3-005L2/010L2/020L2/040L2/075L2/100L2/150L2 IP10:SV3-200L2/300L2/500L2
			Pollution degree	2 (in an IP54 or higher control panel) However, the product must be used in the following environments: • No corrosive or flammable gases • No exposure to water, oil, or chemicals • No dust
		Operating ambient temperature		-5 to +60°C 23 to 140°F (No freezing) (reduced ratings at +55°C 131°F or higher)
		Storage ambient temperature		-20 to +85°C -4 to +185°F (No freezing)
		Operating/storage ambient temperature		95% RH or less (No condensation)
		Altitude		No more than 2,000 m 6,561.7' above sea level (reduced ratings at 1,000 m 3,280.8' or higher)
		Vibration resistance		4.9 m/s² 16.1 ft/s² (Compliant with JIS C60068-2-6)
		Impact resistance		19.6 m/s² 64.3 ft/s² (Compliant with JIS C60068-2-27)
		Other		No static noise, strong electric or magnetic fields, or radiation
	Applied standard	UL/CSA standards		UL 61800-5-1, CSA 22.2 No. 274
		CE marking	Machinery Directive	EN 61800-5-1, EN 61800-5-2, EN ISO 13849-1:2015 Cat. 3 PLe, EN IEC 62061 Maximum SIL3
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part 15 B, ICES-003. Class A
	Structure	Type		Base mount installation
	Safety function			STO function (STO/EN 61800-5-2)
	Safety function	Safety parameters		SIL 3 / EN 61508, Maximum SIL 3 / EN IEC 62061, PLe (Category 3) / EN ISO 13849-1:2015
		Response time		4 ms(max)
		Input		STO1, STO2: Power module base block signals Internal impedance: 5.1 kΩ Operable voltage range: +24 V, ±20% Max. delay time: 4 ms (Time from when STO1 and STO2 are turned off until motor current is interrupted)
		Output		EDM: Built-in safety circuit status monitoring (fixed output) Max. allowable voltage: 30 VDC Max. allowable current: 50 mA DC Max. voltage drop at ON: 1.5 V Max. delay time: 4 ms (Time from STO1 and STO2 change to EDM change)
	Protection function			Overcurrent, overvoltage, undervoltage, overload, regenerative error, etc.
	Min. insulation resistance			500 VDC 1 MΩ or more with insulation resistance meter
	Insulation withstand voltage			1,500 VAC or more (between primary side and ground) 3,000 VAC or more (between primary and secondary) 350 VAC: between secondary circuit and ground
	Weight			Approx. 4.4 kg 9.70 lb
Power supply/current capacity and power loss	Main circuit power supply			Three-phase 200 V/DC 270 V
	Max. applicable motor capacity			5.0 kW
	Power supply capacity for 1 amplifier			7.5 kVA
	Output current	Continuous		32.9 Arms
		Max.		84 Arms
	Main circuit power loss			Three-phase 200 V: 226.6 W DC 270 V: 146.2 W
	Regenerative resistor power loss			Three-phase 200 V: 36 W DC 270 V: ―
	Control circuit power loss			19 W
	Total power loss			Three-phase 200 V: 245.6 W DC 270 V: 165.2 W
	Rated input current	Main circuit		Three-phase 200 V: 25 Arms DC 270 V: 34 Arms
		Control circuit		0.3 Arms
	Rush current	Main circuit		Three-phase 200 V: 68 A ^3 DC 270 V: 68 A ^3^*4 (External: 5 Ω)
		Control circuit		34 A ^*3
Performance specifications	Performance	Speed control range		1:5000 (Under conditions where load torque is equal to or less than rated torque)
		Speed fluctuation rate	At load fluctuation	0 to 100% load variation: ±0.01% or less (at rated rotation speed)
			At main circuit voltage change	Rated voltage ±10%: 0% (at rated rotation speed)
			At ambient temperature change	Ambient temperature 0 to +50°C 32 to 122°F: ±0.1% or less (at rated rotation speed)
		Torque control accuracy (reproducibility)		±1%
		Velocity frequency response		3.1 kHz
	Dynamic brake			Operates at main circuit power off, servo alarm, servo off, limit switch detection (LSP/LSN), and forced stop detection (FSTOP)
	Regenerative resistor			Built-in regenerative resistor: Disabled at 50 to 400 W Enabled at 750 W to 5.0 kW External regenerative resistor: OP-84399 (50 W to 1.0 kW) OP-87073 (1.5 kW^*5)
	Display Function	Panel function		7-segment LED Two rotary switches (16 ch)
		Communication status indicator LED		EtherCAT® communication: L/A × 2 EtherCAT® communication status: RUN×1 EtherCAT® error status: ERR×1
	Servo functions	Tuning		Auto-tuning, notch filter, vibration suppression, damping control, model tracking, friction compensation, load inertia moment ratio variation compensation, deviation reduction, low-frequency vibration suppression, etc.
		Monitor		Lifespan prediction, vibration, load factor, power consumption, temperature, etc.
I/O specifications	Sequence input signal	Number of inputs		7 (3 high-speed inputs, 4 general-purpose inputs)
		Max. input voltage		28.8 VDC
		Rated input voltage		24 VDC
		Min. ON voltage		19 VDC
		Max. OFF current/voltage		High-speed input: 0.1 mA, General-purpose input: 0.3 mA
		Common point mode		7 points/1 common (1 terminal) (bidirectional)
		Input time constant		250 μs, 500 μs, 1 ms, 2.5 ms, 5 ms, 10 ms
		Input current		High-speed input: 4.4 mA, General-purpose input: 4.5 mA
		Input impedance		Approx. 5.1 kΩ
		Assignable input signals		All signal assignment, Logic settable forced stop (FSTOP), Probe 1 latch input (PROBE1), Probe 2 latch input (PROBE2), Home switch input (HOME), Forward side limit switch (LSP), Reverse side limit switch (LSN), Forward side torque limit selection (PTL), Reverse side torque limit selection (NTL)
	Sequence output signal	Number of outputs		4
		Output mode		Transistor NPN output
		Rated load		30 VDC/50 mA
		Leakage current when OFF		0.5 mA
		Residual voltage when ON		1.5 VDC or less
		Common point mode		Independent common
		Assignable output signals		Assignment of each signal except ALARM signal, Logic setting available alarm (ALARM), In-position (INPOS), Velocity matching (VCMP), Zero speed detection (ZSP), Ready to run (RDY), Torque limiting (TLM), Velocity limiting (VLM), Electromagnetic brake timing (BRAKE), Warning (WARN), Near positioning (NEAR)
	Analog Feedback Input signal monitor	Max. input voltage		±12 V
		Accuracy		±1% of F.S.
		Resolution		±12 bits
		Input impedance		30 kΩ
	Encoder division pulse output signal	Output mode		A-phase (A+/A-), B-phase B (B+/B-), Z-phase (Z+/Z-): Differential line driver output
		Line driver		SN75ALS174 (T.I.) equivalent
		Output frequency		1.6 Mpps (at 2-phase quadruplication, equivalent to 6.4 MHz)^*6
	Analog monitor output	No. of channels		2 ch
		Output range		±10 V (Linearity effective range: ±8 V)
		Resolution		16 bits
		Conversion precision		±20 mV (typ.)
		Max. allowable load current		±10 mA
		Conversion speed		1.2 ms (typ.)
Communication specifications	EtherCAT® communication	Applicable communication standards		IEC 61158 Type12, IEC 61800-7 CiA402 Drive Profile
		Physical layer		100 BASE-TX(IEEE802.3)
		Cable		Category 5 STP, 2 pair Automatic cable identification is performed by the AUTO MDI/MDI-X function.
		Mailbox		Emergency messages, SDO requests, SDO responses
		Distributed clocks		Free-run, DC mode (switchable), Supported DC cycles (62.5 μs to 4 ms, in 62.5 μs increments)
		Max. distance between stations		50 m 164.0'
	USB communication	Connected device		PC
		Communication standard		USB 2.0–compliant
		Function		Status display, Parameter settings, Tuning, etc.
^1 Single-phase input can only be used with the SV3-005L2, SV3-010L2, SV3-020L2, SV3-040L2, and SV3-075L2. ^2 When using a DC power supply input, set “AC/DC power supply” to “DC”. ^3 The inrush current duration is 20 ms or less when used at the above current levels. ^4 When using the SV3-500L2 with DC power input, connect an external inrush current protection circuit and design it so that the circuit follows the power on/off sequence recommended by KEYENCE. Otherwise, the equipment may become damaged. Refer to the SV3 Series user’s manual for the power-on/off sequence. ^5 Depending on operating conditions, 2 kW, 3 kW, and 5 kW servo amplifiers can also be used. ^*6 The frequency divider ratio can be set as desired with a parameter.

Keyence SV-D5D Keyence

€0,00

Sold Out

Specifications

Model				SV-D5D
Type				Electromagnetic brake cable
Length				5 m 16.4'
Note				Applicable servo amplifier capacity: 1 k to 5 kW

Keyence ER-30PC Keyence

€0,00

Sold Out

Specifications

Model		ER-30PC ^*1
Type		Ultra-long distance shielded type Screw type M18 Connector (M12 4-pin) PNP output
Power supply cable length		― ^*2
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	26 mm 1.02" ±10% ^*3
	With distance switching (Mode 2)	20 mm 0.79" ±10% ^*3
Response frequency	With default settings (Mode 1)	15 Hz ^4 ^5
	With distance switching (Mode 2)	30 Hz ^4 ^5
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*6
Standard detectable object (Iron, t = 1 mm 0.04")		78 × 78 mm 3.07" × 3.07"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 100 mA or less for 1 output, or 100 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.1 V or less (Output current: 10 mA or less) / 2.4 V or less (Output current: 10 to 100 mA) ^*7
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V) ^*8
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*9
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Button: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 140 g 4.94 oz
^1 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^2 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^3 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^4 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^5 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^6 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^7 Residual voltage is for when a 2 m 6.6' cable is used. ^8 For IO-Link-compatible devices listed under 1, power consumption is as follows. M8: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18, M30: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V) ^9 The upper limit of the UL temperature rating is +55℃ +131℉.