Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | Discrete input/output module on Fipio |
| Discrete I/O number | 16 |
| Group of channels | 1 group of 8 inputs 2 groups of 4 outputs |
| Discrete input number | 8 EN/IEC 61131 type 2 |
| Input compatibility | With 2-wire/3-wire proximity sensors |
Complementary
| Characteristic | Value(s) |
|---|---|
| Discrete input voltage | 24 V DC |
| Discrete input logic | Positive |
| Discrete input current | 7 mA |
| Sensor power supply | 19.2â¦30 V |
| Voltage state 0 guaranteed | <= 5 V |
| Voltage state 1 guaranteed | >= 11 V |
| Current state 0 guaranteed | <= 2 mA |
| Current state 1 guaranteed | >= 6 mA 11 V |
| Response time | 3.5 ms from state 0 to 1 on input 3.5 ms from state 1 to 0 on input |
| Power supply monitoring | 14â¦18 V DC preactuator 14â¦18 V DC sensor |
| Discrete output number | 8 |
| Discrete output type | Solid state |
| Discrete output voltage | 24 V DC |
| Output voltage limits | 19.2...30 V |
| Discrete output current | 0.5 A |
| Maximum output current | 0.625 A 140 °F (60 °C) per channel 1.2 A 104 °F (40 °C) per group of 4 channels 2 A per group of 4 channels |
| Maximum leakage current | 1 mA at state 0 |
| [Ures] residual voltage | 0.5 V at state 1 on output |
| Response time on output | < 0.5 ms resistive |
| Short-circuit protection | 1.5 A by thermal circuit breaker on output 350 mA per 4 channels group on input |
| Output overload protection | 1.5 A by thermal circuit breaker on output |
| Output overvoltage protection | By transil diode |
| Isolation between channels | None |
| Isolation voltage | 500 V AC between bus and internal logic |
| Isolation between output channels group | 60 Vrms AC |
| Isolation between channels and internal logic | 60 Vrms AC |
| Isolation between input channel and output channel | 60 V AC |
| Local signalling | 3 LEDs for module operation and integrated communication 16 LEDs for channels status 1 LED for sensor power supply fault 2 LEDs for preactuator power supply |
| Electrical connection | 1 connector dust and damp proof male M23 for Fipio bus connctn, 24V DC power supply for sensor & internal electric of mod 1 connector male 7/8 inch for 2 24 V DC preactuators power supplies 8 connectors female M12 4 for connecting sensors and 4 for preactuators |
| Operating position | Any position |
| Marking | CE |
| Current consumption | 80 mA 24 V DC 5 outputs at state 1 |
| Product Weight | 1.19 lb(US) (0.54 kg) |
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator