Process Controls / Process Sensors

Showing 49 - 72 of 586 products

4,420.00 kr

Only 8 units left

Specifications

Model		FT-H50
Type		Mid to low temperature, Ultra long-range
Rated temperature range		32 to 932°F (0 to 500°C) ^*1
Displayable temperature range		-58 to +968°F (-50 to +520°C)
Detecting distance		Unlimited ^*2
Measuring distance / View diameter (example)		500/ø18 mm 19.69"/ø0.71" 1500/ø30 mm 59.06"/ø1.18" 3000/ø75 mm 118.11"/ø2.95"
Sight		2-point visible laser beam ^*3
Detecting element		Thermopile
Detecting wavelength		8 to 14 μm
Repeatability		±5.4°F (±3°C)
Emissivity (ε) correction		0.10 to 1.99 (0.01 step)
Environmental resistance	Ambient temperature	14 to 131°F (-10 to 55°C), No freezing
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
	Shock resistance	500 m/s², 10 times in each direction of each axis (X, Y, Z), 60 times in total
Material		Case: Reinforced glass plastic, Infrared collector lens: Germanium, Laser transmitter: Polyarylate, Lens tube: Aluminum, Cable: Vinyl chloride, Mounting bracket: SUS304, Mounting screw: Stainless steel
Accessory		Mounting bracket
Weight		Approx. 150g
^1 Repeatability is guaranteed within the rated temperature range. ^2 Place at a distance so that object appears 1.5 times larger than the view diameter. ^*3 Visible semiconductor laser beam wavelength 655 nm, Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10). The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice.

Keyence FT-H40K Keyence

5,813.00 kr

Only 6 units left

Specifications

Model		FT-H40K
Type		High temperature, Mid-range
Rated temperature range		32 to 2462°F (0 to 1350°C) ^*1
Displayable temperature range		-58 to 2552°F (-50 to +1400°C)°C
Detecting distance		Unlimited ^*2
Measuring distance / View diameter (example)		100/ø7.5 mm 3.94"/ø0.30" 150/ø6 mm 5.91"/ø0.24" 300/ø11.5 mm 11.81"/ø0.45"
Sight		2-point visible laser beam ^*3
Detecting element		Thermopile
Detecting wavelength		8 to 14 μm
Repeatability		±5.4°F (±3°C)
Emissivity (ε) correction		0.10 to 1.99 (0.01 step)
Environmental resistance	Ambient temperature	14 to 131°F (-10 to 55°C), No freezing
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
	Shock resistance	500 m/s², 10 times in each direction of each axis (X, Y, Z), 60 times in total
Material		Case: Reinforced glass plastic, Infrared collector lens: Germanium, Laser transmitter: Polyarylate, Lens tube: Aluminum, Cable: Vinyl chloride, Mounting bracket: SUS304, Mounting screw: Stainless steel
Accessory		Mounting bracket
Weight		Approx. 150g
^1 Repeatability is guaranteed within the rated temperature range. ^2 Place at a distance so that object appears 1.5 times larger than the view diameter. ^*3 Visible semiconductor laser beam wavelength 655 nm, Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10). The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice.

Keyence FT-H30 Keyence

3,606.00 kr

Only 5 units left

Specifications

Model		FT-H30
Type		Mid to low temperature, Long-range
Rated temperature range		32 to 932°F (0 to 500°C) ^*1
Displayable temperature range		-58 to +968°F (-50 to +520°C)
Detecting distance		Unlimited ^*2
Measuring distance / View diameter (example)		200/ø15 mm 7.87"/ø0.59" 400/ø18 mm 15.75"/ø0.71" 600/ø33 mm 23.62"/ø1.30"
Sight		2-point visible laser beam ^*3
Detecting element		Thermopile
Detecting wavelength		8 to 14 μm
Repeatability		±0.9°F (±0.5°C)
Emissivity (ε) correction		0.10 to 1.99 (0.01 step)
Environmental resistance	Ambient temperature	14 to 131°F (-10 to 55°C), No freezing
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
	Shock resistance	500 m/s², 10 times in each direction of each axis (X, Y, Z), 60 times in total
Material		Case: Reinforced glass plastic, Infrared collector lens: Germanium, Laser transmitter: Polyarylate, Cable: Vinyl chloride, Mounting bracket: SUS304, Mounting screw: Stainless steel
Accessory		Mounting bracket
Weight		Approx. 120g
^1 Repeatability is guaranteed within the rated temperature range. ^2 Place at a distance so that object appears 1.5 times larger than the view diameter. ^*3 Visible semiconductor laser beam wavelength 655 nm, Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10). The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice.

Keyence FT-H10 Keyence

7,775.00 kr

Only 8 units left

Specifications

Model		FT-H10
Type		Mid to low temperature, Small-spot
Rated temperature range		32 to 932°F (0 to 500°C) ^*1
Displayable temperature range		-58 to +968°F (-50 to +520°C)
Detecting distance		Unlimited ^*2
Measuring distance / View diameter (example)		17.5/ø6.3 mm 0.69"/ø0.25" 35/ø1.5 mm 1.38"/ø0.06" 52.5/ø8 mm 2.07"/ø0.31"
Sight		2-point visible laser beam ^*3
Detecting element		Thermopile
Detecting wavelength		8 to 14 μm
Repeatability		±0.9°F (±0.5°C)
Emissivity (ε) correction		0.10 to 1.99 (0.01 step)
Environmental resistance	Ambient temperature	14 to 131°F (-10 to 55°C), No freezing
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
	Shock resistance	500 m/s², 10 times in each direction of each axis (X, Y, Z), 60 times in total
Material		Case: Reinforced glass plastic, Infrared collector lens: Germanium, Laser transmitter: Polyarylate, Cable: Vinyl chloride, Mounting bracket: SUS304, Mounting screw: Stainless steel
Accessory		Mounting bracket
Weight		Approx. 120g
^1 Repeatability is guaranteed within the rated temperature range. ^2 Place at a distance so that object appears 1.5 times larger than the view diameter. ^*3 Visible semiconductor laser beam wavelength 655 nm, Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10). The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice.

Keyence FT-55AWP Keyence

4,963.00 kr

Only 4 units left

Specifications

Model		FT-55AWP
Type		Panel mounting type
Power voltage		12 to 24 VDC, Ripple (P-P)10% max.
Power consumption	Normal	1400 mW (For 12 V), 1600 mW (For 24 V)
	Eco mode	1150 mW (For 12 V), 1350 mW (For 24 V)
Display method		4 + 1/two-digit 7-segment LED, dual-display (red/green) display (character height in the upper display (red): 8 mm 0.31", character height in the lower display (green): 5.7 mm 0.22"), Display updating cycle: 10/s
Operation indicator		Red LED x 3 (control output1/control output2/timing input indicator)
Display resolution		0.2°F or 1.8°F (0.1°C or 1°C) (when using H10/H20/H30), 1.8°F (1°C) (when using H50/H40K/H50K)
Hysteresis		Variable
Response speed		HSP, 30, 100, 200, 500, 1000, or 5000 ms can be selected (In HSP: 15 ms max.)
Bank selection		Pink and Purple wires can be configured for Bank Inputs #1,2 respectively for up to 4 total banks.
Bank specifications		Emissivity (valid in temperature mode) and limit settings x 2 can be set for each bank.
External input	Timing input	Input time: 2 ms min.
	Bank input	Input time: 20 ms min.
Control output		PNP open collector x 2 channels (N.O./N.C. selectable), 50 mA max. 30 VDC max., residual voltage: 1 V max.
Analog output		4 to 20 mA, maximum load resistance: 260 Ω The upper- and lower-limit values of the analog output range can be set optionally.
Environmental resistance	Ambient temperature	-14 to +122°F (-10 to +50°C), No freezing ^*1
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
Material		Main unit, Cover: Polycarbonate, Keycaps: Polyester elastomer, Cable: Vinyl chloride Panel mounting bracket: Polyacetal, front protection cover: Polycarbonate
Accessory		Panel mounting bracket, protection cover, power cable, unit cover sticker
Weight		Approx. 85g
^*1 Ambient temperature when using the analog output is 14 to 113°F (-10 to 45°C) .

Keyence FT-55AW Keyence

6,030.00 kr

Only 5 units left

Specifications

Model		FT-55AW
Type		Panel mounting type
Power voltage		12 to 24 VDC, Ripple (P-P)10% max.
Power consumption	Normal	1400 mW (For 12 V), 1600 mW (For 24 V)
	Eco mode	1150 mW (For 12 V), 1350 mW (For 24 V)
Display method		4 + 1/two-digit 7-segment LED, dual-display (red/green) display (character height in the upper display (red): 8 mm 0.31", character height in the lower display (green): 5.7 mm 0.22"), Display updating cycle: 10/s
Operation indicator		Red LED x 3 (control output1/control output2/timing input indicator)
Display resolution		0.2°F or 1.8°F (0.1°C or 1°C) (when using H10/H20/H30), 1.8°F (1°C) (when using H50/H40K/H50K)
Hysteresis		Variable
Response speed		HSP, 30, 100, 200, 500, 1000, or 5000 ms can be selected (In HSP: 15 ms max.)
Bank selection		Pink and Purple wires can be configured for Bank Inputs #1,2 respectively for up to 4 total banks.
Bank specifications		Emissivity (valid in temperature mode) and limit settings x 2 can be set for each bank.
External input	Timing input	Input time: 2 ms min.
	Bank input	Input time: 20 ms min.
Control output		NPN open collector x 2 channels (N.O./N.C. selectable), 100 mA max. 40 VDC max., residual voltage: 1 V max.
Analog output		4 to 20 mA, maximum load resistance: 260 Ω The upper- and lower-limit values of the analog output range can be set optionally.
Environmental resistance	Ambient temperature	-14 to +122°F (-10 to +50°C), No freezing ^*1
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
Material		Main unit, Cover: Polycarbonate, Keycaps: Polyester elastomer, Cable: Vinyl chloride Panel mounting bracket: Polyacetal, front protection cover: Polycarbonate
Accessory		Panel mounting bracket, protection cover, power cable, unit cover sticker
Weight		Approx. 85g
^*1 Ambient temperature when using the analog output is 14 to 113°F (-10 to 45°C) .

Keyence FT-50AWP Keyence

6,075.00 kr

Only 6 units left

Specifications

Model		FT-50AWP
Type		DIN-rail mounting type
Power voltage		12 to 24 VDC, Ripple (P-P)10% max.
Power consumption	Normal	1400 mW (For 12 V), 1600 mW (For 24 V)
	Eco mode	1150 mW (For 12 V), 1350 mW (For 24 V)
Display method		4 + 1/two-digit 7-segment LED, dual-display (red/green) display (character height in the upper display (red): 8 mm 0.31", character height in the lower display (green): 5.7 mm 0.22"), Display updating cycle: 10/s
Operation indicator		Red LED x 3 (control output1/control output2/timing input indicator)
Display resolution		0.2°F or 1.8°F (0.1°C or 1°C) (when using H10/H20/H30), 1.8°F (1°C) (when using H50/H40K/H50K)
Hysteresis		Variable
Response speed		HSP, 30, 100, 200, 500, 1000, or 5000 ms can be selected (In HSP: 15 ms max.)
Bank selection		Pink and Purple wires can be configured for Bank Inputs #1,2 respectively for up to 4 total banks.
Bank specifications		Emissivity (valid in temperature mode) and limit settings x 2 can be set for each bank.
External input	Timing input	Input time: 2 ms min.
	Bank input	Input time: 20 ms min.
Control output		PNP open collector x 2 channels (N.O./N.C. selectable), 50 mA max. 30 VDC max., residual voltage: 1 V max.
Analog output		4 to 20 mA, maximum load resistance: 260 Ω The upper- and lower-limit values of the analog output range can be set optionally.
Environmental resistance	Ambient temperature	-14 to +122°F (-10 to +50°C), No freezing ^*1
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
Material		Main unit, Cover: Polycarbonate, Keycaps: Polyester elastomer, Cable: Vinyl chloride Mounting bracket: SPCC
Accessory		DIN anchoring fixture, power cable, unit cover sticker
Weight		Approx. 85g
^*1 Ambient temperature when using the analog output is 14 to 113°F (-10 to 45°C) .

Keyence FT-50AW Keyence

20,782.00 kr

Only 6 units left

Specifications

Model		FT-50AW
Type		DIN-rail mounting type
Power voltage		12 to 24 VDC, Ripple (P-P)10% max.
Power consumption	Normal	1400 mW (For 12 V), 1600 mW (For 24 V)
	Eco mode	1150 mW (For 12 V), 1350 mW (For 24 V)
Display method		4 + 1/two-digit 7-segment LED, dual-display (red/green) display (character height in the upper display (red): 8 mm 0.31", character height in the lower display (green): 5.7 mm 0.22"), Display updating cycle: 10/s
Operation indicator		Red LED x 3 (control output1/control output2/timing input indicator)
Display resolution		0.2°F or 1.8°F (0.1°C or 1°C) (when using H10/H20/H30), 1.8°F (1°C) (when using H50/H40K/H50K)
Hysteresis		Variable
Response speed		HSP, 30, 100, 200, 500, 1000, or 5000 ms can be selected (In HSP: 15 ms max.)
Bank selection		Pink and Purple wires can be configured for Bank Inputs #1,2 respectively for up to 4 total banks.
Bank specifications		Emissivity (valid in temperature mode) and limit settings x 2 can be set for each bank.
External input	Timing input	Input time: 2 ms min.
	Bank input	Input time: 20 ms min.
Control output		NPN open collector x 2 channels (N.O./N.C. selectable), 100 mA max. 40 VDC max., residual voltage: 1 V max.
Analog output		4 to 20 mA, maximum load resistance: 260 Ω The upper- and lower-limit values of the analog output range can be set optionally.
Environmental resistance	Ambient temperature	-14 to +122°F (-10 to +50°C), No freezing ^*1
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
Material		Main unit, Cover: Polycarbonate, Keycaps: Polyester elastomer, Cable: Vinyl chloride Mounting bracket: SPCC
Accessory		DIN anchoring fixture, power cable, unit cover sticker
Weight		Approx. 85g
^*1 Ambient temperature when using the analog output is 14 to 113°F (-10 to 45°C) .

Keyence FW-SV01 Keyence

0.00 kr

Sold Out

Specifications

Model		FW-SV01
Sensor head model combination		FW-H02,FW-H07,FW-H10R
Detecting area		50 to 180 mm2.0" to 7.1" (FW-H02), 150 to 630 mm5.9" to 24.8" (FW-H07), 150 to 900 mm5.9" to 35.4" (FW-H10R)^*1
Environmental resistance	Ambient temperature	-25 to +70 °C -13 to 158 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		PPS
Accessories		M18 nut: 1, Wave washer: 1
Weight		Approx. 15 g
^*1 Indicates the distance from the detecting reference (zero point). Refer to the dimensions below for the detecting reference.

Keyence FW-LG01 Keyence

0.00 kr

Sold Out

Specifications

Model		FW-LG01^*1
Rating	Power voltage	6 VDC (button battery LR43 x 4)
Light source		Blue LED (wavelength: 470 nm)
Environmental resistance	Ambient temperature	0 to +45 °C 32 to 113 °F (No freezing)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Main unit: ABS; Keycap: Silicon rubber
Accessories		Test button batteries (LR43): 4, instruction manual Batteries are loaded to the casing.
Weight		Approx. 21 g (Including batteries)
^*1 It is recommended that the product be used with a maximum detecting distance of 500 mm 19.69" due to the visibility and consistency of the spot and the detecting distance.

Keyence FW-B02 Keyence

0.00 kr

Sold Out

Specifications

Model				FW-B02
Type				Straight Mounting Bracket
Applicable product				FW Series
Material				PPS

Keyence FW-B01 Keyence

0.00 kr

Sold Out

Specifications

Model				FW-B01
Type				Standard Mounting Bracket
Applicable product				FW Series
Material				PPS

Keyence OP-94739 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-94739
Overview				Connector cable with M12 on the both edges for connection.
Applicable product				For extension of standard cables of connector sensors FD-P and FW.
Cable end				M12 straight connector - M12 straight connector
Length				3 m 9.84'
Note				M12 connector cannot be used with M8 connector.

Keyence OP-94738 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-94738
Overview				Connector cable with M12 on the both edges for connection.
Applicable product				For extension of standard cables of connector sensors FD-P and FW.
Cable end				M12 straight connector - M12 straight connector
Length				2 m 6.56'
Note				M12 connector cannot be used with M8 connector.

Keyence OP-94737 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-94737
Overview				Connector cable with M12 on the both edges for connection.
Applicable product				For extension of standard cables of connector sensors FD-P and FW.
Cable end				M12 straight connector - M12 straight connector
Length				1 m 3.28'

Keyence OP-94736 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-94736
Overview				Connector cable with M12 on the both edges for connection.
Applicable product				For extension of standard cables of connector sensors FD-P and FW.
Cable end				M12 straight connector - M12 straight connector
Length				0.5 m 0.64'

Keyence OP-51691 Keyence

0.00 kr

Sold Out

Specifications

Model		OP-51691
Type		L-shaped relay connector
Environmental resistance	Ambient temperature range	-25 to +70 °C -13 to +158 °F (No freezing)
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours each in the X, Y, and Z axis
Weight		Approx. 70 g

Keyence OP-51494 Keyence

0.00 kr

Sold Out

Specifications

Model			OP-51494
Type			Sensor head cable for Extension
No. of Cores			4
Conductor	sq		0.18 mm²
	Material		Tinned annealed copper wire
	Composition		37 line/0.08 mm
	Diameter		0.56 mm
Insulator	Material		cross-linked polyethylene
	Color		blue, orange, brown, gray
	Thickness	Standard	0.22 mm
		minimum	more than 0.20 mm
	Diameter		1.0 mm
Sheath	Material		heat and oil resistant vinyl
	Color		black
	Thickness	Standard	0.55 mm
		minimum	more than 0.50 mm
Whole diameter			3.6^±0.15 mm
Length			20 m

Keyence OP-51475 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-51475
Type				Connector cable
Length				10 m 32.81'
Note				For head-amplifier connection

Keyence FW-H07 Keyence

3,336.00 kr

Only 6 units left

Specifications

Model		FW-H07
Type		Standard type
Detecting area		150 to 700 mm 5.9" to 27.6"^*1
Response speed		300 ms
Temperature characteristics		0.25% of F.S./°C ^2^3
Indicator lamp		Operation indicator (orange) x1 (Turns on when the power is turned on.)
Dimensions		M18 x P1, Length= 63.5 mm 2.50"
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +70 °C -13 to 158 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Brass-nickel plating, PBT, Polyurethane, Polyamide resin
Accessories		M18 nut: 2, Head cable: 2 m 6.6', Standard Mounting Bracket (FW-B01)
Weight		Approx. 89 g
^1 Less stable zones of approx. 2% of F.S. exist at both ends of the detecting range. ^2 The variation of sonic velocity in air generates errors in the negative direction at 25°C at 77°F and above, or in the positive direction at 25°C at 77°F and below. ^*3 The errors for the indicated value at 25°C at 77°F.

Keyence FW-H02 Keyence

3,336.00 kr

Only 9 units left

Specifications

Model		FW-H02
Type		Standard type
Detecting area		50 to 200 mm 2.0" to 7.9"^*1
Response speed		250 ms
Temperature characteristics		0.25% of F.S./°C ^2^3
Indicator lamp		Operation indicator (orange) x1 (Turns on when the power is turned on.)
Dimensions		M18 x P1, Length= 63.5 mm 2.50"
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +70 °C -13 to 158 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Brass-nickel plating, PBT, Polyurethane, Polyamide resin
Accessories		M18 nut: 2, Head cable: 2 m 6.6', Standard Mounting Bracket (FW-B01)
Weight		Approx. 89 g
^1 Less stable zones of approx. 2% of F.S. exist at both ends of the detecting range. ^2 The variation of sonic velocity in air generates errors in the negative direction at 25°C at 77°F and above, or in the positive direction at 25°C at 77°F and below. ^*3 The errors for the indicated value at 25°C at 77°F.

Keyence FW-V25P Keyence

8,558.00 kr

Only 5 units left

Specifications

Model			FW-V25P
Type			PNP
Rating	Power voltage		24 VDC, ripple (P-P): 10% or less
Current consumption	When connected with the FW-H02/H07	Normal	1680 mW (70 mA) or less^*1
		Power save	1370 mW (57 mA) or less^*1
	When connected with the FW-H10R	Normal	2640 mW (110 mA) or less^*1
		Power save	2330 mW (97 mA) or less^*1
Display power			Dual row display with signed 3-digit 7-segment LED (character height: upper characters: 8 mm 0.32", red; lower characters: 5.7 mm 0.22", green), display update cycle: 10 times/sec. (5 times/sec. when averaging the display)
Operation status indicators			Red LED × 2 (corresponding to control output 1 and control output 2), green LED × 2 (display channel indicators)
Chattering prevention function			Off, 0.5, 1, 2, 5, 10 s selectable (When the FW-H10R is connected, this is selectable between off, 1, 2, 5, and 10 s.)
Bank/external shift input			No-voltage input (with contacts, without contacts), input time: 25 ms or more (switchable with analog output)
Control output			Maximum PNP open-collector output: 100 mA (30 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)
Protection circuit			Reverse polarity protection, overcurrent protection, surge absorption
Analog output			4 to 20 mA, maximum load resistance: 260 Ω (Bank/external shift input/analog output selectable)
Environmental resistance	Ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material			Main unit and cover: polycarbonate, key tops: elastomer
Accessories			Panel mounting bracket, Protective front cover, Power cable, Instruction manual
Weight			Approx. 85 g (Including a 6.6' 2-m power cable)
^*1 Excluding analog output. Includes head unit.

Keyence FW-V25 Keyence

8,558.00 kr

Only 4 units left

Specifications

Model			FW-V25
Type			NPN
Rating	Power voltage		24 VDC, ripple (P-P): 10% or less
Current consumption	When connected with the FW-H02/H07	Normal	1680 mW (70 mA) or less^*1
		Power save	1370 mW (57 mA) or less^*1
	When connected with the FW-H10R	Normal	2640 mW (110 mA) or less^*1
		Power save	2330 mW (97 mA) or less^*1
Display power			Dual row display with signed 3-digit 7-segment LED (character height: upper characters: 8 mm 0.32", red; lower characters: 5.7 mm 0.22", green), display update cycle: 10 times/sec. (5 times/sec. when averaging the display)
Operation status indicators			Red LED × 2 (corresponding to control output 1 and control output 2), green LED × 2 (display channel indicators)
Chattering prevention function			Off, 0.5, 1, 2, 5, 10 s selectable (When the FW-H10R is connected, this is selectable between off, 1, 2, 5, and 10 s.)
Bank/external shift input			No-voltage input (with contacts, without contacts), input time: 25 ms or more (switchable with analog output)
Control output			Maximum NPN open-collector output: 100 mA (40 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)
Protection circuit			Reverse polarity protection, overcurrent protection, surge absorption
Analog output			4 to 20 mA, maximum load resistance: 260 Ω (Bank/external shift input/analog output selectable)
Environmental resistance	Ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material			Main unit and cover: polycarbonate, key tops: elastomer
Accessories			Panel mounting bracket, Protective front cover, Power cable, Instruction manual
Weight			Approx. 85 g (Including a 6.6' 2-m power cable)
^*1 Excluding analog output. Includes head unit.

Keyence FW-V20P Keyence

3,770.00 kr

In stock, 13 units

Specifications

Model			FW-V20P
Type			PNP
Rating	Power voltage		24 VDC, ripple (P-P): 10% or less
Current consumption	When connected with the FW-H02/H07	Normal	1680 mW (70 mA) or less^*1
		Power save	1370 mW (57 mA) or less^*1
	When connected with the FW-H10R	Normal	2640 mW (110 mA) or less^*1
		Power save	2330 mW (97 mA) or less^*1
Display power			Dual row display with signed 3-digit 7-segment LED (character height: upper characters: 8 mm 0.32", red; lower characters: 5.7 mm 0.22", green), display update cycle: 10 times/sec. (5 times/sec. when averaging the display)
Operation status indicators			Red LED × 2 (corresponding to control output 1 and control output 2), green LED × 2 (display channel indicators)
Chattering prevention function			Off, 0.5, 1, 2, 5, 10 s selectable (When the FW-H10R is connected, this is selectable between off, 1, 2, 5, and 10 s.)
Bank/external shift input			No-voltage input (with contacts, without contacts), input time: 25 ms or more (switchable with analog output)
Control output			Maximum PNP open-collector output: 100 mA (30 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)
Protection circuit			Reverse polarity protection, overcurrent protection, surge absorption
Analog output			4 to 20 mA, maximum load resistance: 260 Ω (Bank/external shift input/analog output selectable)
Environmental resistance	Ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material			Main unit and cover: polycarbonate, key tops: elastomer
Accessories			Mounting bracket, power cable, instruction manual
Weight			Approx. 85 g (Including a 6.6' 2-m power cable)
^*1 Excluding analog output. Includes head unit.

Previous Page 3 / 25Next