Process Controls / Process Sensors

Showing 25 - 48 of 586 products

0.00 kr

Sold Out

Specifications

Model			FI-T8
Supported pipe diameter			1/8", 1/4" (6 A, 8 A) ø8–14 ø0.31"–0.55"
Supported pipe materials			Metal piping
Supported temperature range			−20 to +180°C –4 to +356°F^*1
Display method			Organic EL, status indicator light
Display resolution			0.1°C 32.18°F
Response time			5 s (50% response), 15 s (90% response)^*2
Display amplifier averaging time			0.1 s / 10.0 s / 20.0 s / 30.0 s / 60.0 s / 120.0 s / 300.0 s
Measurement accuracy			±0.5°C ±0.9°F (pipe temperature −20 to +80°C –4 to 176°F) (ambient temperature of 25°C 77°F)^2^3 ±1.0°C ±1.8°F (pipe temperature 80–180°C 176–356°F) (ambient temperature of 25°C 77°F)^2^3
Hysteresis			Variable
Measurement principle			Pt100 4-wire type
Power I/O connector			M8 4-pin connector
Power supply	Current consumption		20 mA or less (excluding load current)^*4
When used standalone	I/O (switchable)	Output (Ch1/Ch2)	Control output: switching NPN/PNP setting Open collector output: 30 VDC or less, maximum 100 mA/ch or less, residual voltage 2.5 V or less^*5
		Analog output (Ch2)	4–20 mA / 0–20 mA (switchable), load resistance 260 Ω or less^*5
	Power voltage		20–30 VDC, ripple (P-P) 10% included; Class2/LPS^*5
	Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges^*5
	Network compatibility		IO-Link^6^5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient temperature		–10 to +60°C -14 to +140°F (no freezing)
	Relative humidity		35–85% RH (no condensation)
	Vibration resistance		10–500 Hz; power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance		100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Material	Display amplifier		PBT / PAR / POM / SUS303
	Sensor head		Head: PPS / SUS303 / Sn; Pipe clamp unit: SUS304; Cable: fluororesin
	Display amplifier mounting bracket		SUS304
Weight			Approx. 70 g 2.47 oz
^1 When pipe temperature is 100°C 212°F or more, the display amplifier cannot be mounted on the pipe clamp unit. Install the amplifier so it is insulated from the heat from the pipe. ^2 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes and fluid, the ambient temperature and other factors. ^3 This is the value for a constant 25°C 77°F environment, taking into account absolute error and repeatability. ^4 During standalone use, 220 mA or less including load. ^5 When connecting to a FD-H Series/FI-1000 model, please follow the specifications of the display unit. ^6 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO).

Keyence FI-T50 Keyence

5,590.00 kr

Only 2 units left

Specifications

Model			FI-T50
Supported pipe diameter			1 1/4", 1 1/2", 2" (32A, 40A, 50A) ø38–70 ø1.50"–2.76"
Supported pipe materials			Metal piping
Supported temperature range			−20 to +180°C –4 to +356°F^*1
Display method			Organic EL, status indicator light
Display resolution			0.1°C 32.18°F
Response time			5 s (50% response), 15 s (90% response)^*2
Display amplifier averaging time			0.1 s / 10.0 s / 20.0 s / 30.0 s / 60.0 s / 120.0 s / 300.0 s
Measurement accuracy			±0.5°C ±0.9°F (pipe temperature −20 to +80°C –4 to 176°F) (ambient temperature of 25°C 77°F)^2^3 ±1.0°C ±1.8°F (pipe temperature 80–180°C 176–356°F) (ambient temperature of 25°C 77°F)^2^3
Hysteresis			Variable
Measurement principle			Pt100 4-wire type
Power I/O connector			M8 4-pin connector
Power supply	Current consumption		20 mA or less (excluding load current)^*4
When used standalone	I/O (switchable)	Output (Ch1/Ch2)	Control output: switching NPN/PNP setting Open collector output: 30 VDC or less, maximum 100 mA/ch or less, residual voltage 2.5 V or less^*5
		Analog output (Ch2)	4–20 mA / 0–20 mA (switchable), load resistance 260 Ω or less^*5
	Power voltage		20–30 VDC, ripple (P-P) 10% included; Class2/LPS^*5
	Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges^*5
	Network compatibility		IO-Link^6^5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient temperature		–10 to +60°C -14 to +140°F (no freezing)
	Relative humidity		35–85% RH (no condensation)
	Vibration resistance		10–500 Hz; power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance		100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Material	Display amplifier		PBT / PAR / POM / SUS303
	Sensor head		Head: PPS / SUS303 / Sn; Pipe clamp unit: SUS304; Cable: fluororesin
	Display amplifier mounting bracket		SUS304
Weight			Approx. 70 g 2.47 oz
^1 When pipe temperature is 100°C 212°F or more, the display amplifier cannot be mounted on the pipe clamp unit. Install the amplifier so it is insulated from the heat from the pipe. ^2 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes and fluid, the ambient temperature and other factors. ^3 This is the value for a constant 25°C 77°F environment, taking into account absolute error and repeatability. ^4 During standalone use, 220 mA or less including load. ^5 When connecting to a FD-H Series/FI-1000 model, please follow the specifications of the display unit. ^6 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO).

Keyence FI-T25 Keyence

9,731.00 kr

Only 1 unit left

Specifications

Model			FI-T25
Supported pipe diameter			3/4", 1" (20A, 25A) ø22–38 ø0.87"–1.50"
Supported pipe materials			Metal piping
Supported temperature range			−20 to +180°C –4 to +356°F^*1
Display method			Organic EL, status indicator light
Display resolution			0.1°C 32.18°F
Response time			5 s (50% response), 15 s (90% response)^*2
Display amplifier averaging time			0.1 s / 10.0 s / 20.0 s / 30.0 s / 60.0 s / 120.0 s / 300.0 s
Measurement accuracy			±0.5°C ±0.9°F (pipe temperature −20 to +80°C –4 to 176°F) (ambient temperature of 25°C 77°F)^2^3 ±1.0°C ±1.8°F (pipe temperature 80–180°C 176–356°F) (ambient temperature of 25°C 77°F)^2^3
Hysteresis			Variable
Measurement principle			Pt100 4-wire type
Power I/O connector			M8 4-pin connector
Power supply	Current consumption		20 mA or less (excluding load current)^*4
When used standalone	I/O (switchable)	Output (Ch1/Ch2)	Control output: switching NPN/PNP setting Open collector output: 30 VDC or less, maximum 100 mA/ch or less, residual voltage 2.5 V or less^*5
		Analog output (Ch2)	4–20 mA / 0–20 mA (switchable), load resistance 260 Ω or less^*5
	Power voltage		20–30 VDC, ripple (P-P) 10% included; Class2/LPS^*5
	Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges^*5
	Network compatibility		IO-Link^6^5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient temperature		–10 to +60°C -14 to +140°F (no freezing)
	Relative humidity		35–85% RH (no condensation)
	Vibration resistance		10–500 Hz; power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance		100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Material	Display amplifier		PBT / PAR / POM / SUS303
	Sensor head		Head: PPS / SUS303 / Sn; Pipe clamp unit: SUS304; Cable: fluororesin
	Display amplifier mounting bracket		SUS304
Weight			Approx. 65 g 2.29 oz
^1 When pipe temperature is 100°C 212°F or more, the display amplifier cannot be mounted on the pipe clamp unit. Install the amplifier so it is insulated from the heat from the pipe. ^2 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes and fluid, the ambient temperature and other factors. ^3 This is the value for a constant 25°C 77°F environment, taking into account absolute error and repeatability. ^4 During standalone use, 220 mA or less including load. ^5 When connecting to a FD-H Series/FI-1000 model, please follow the specifications of the display unit. ^6 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO).

Keyence FI-T200 Keyence

0.00 kr

Sold Out

Specifications

Model			FI-T200
Supported pipe diameter			5", 6", 8" (125A, 150A, 200A) ø126–220 ø4.96"–8.66"
Supported pipe materials			Metal piping
Supported temperature range			−20 to +180°C –4 to +356°F^*1
Display method			Organic EL, status indicator light
Display resolution			0.1°C 32.18°F
Response time			5 s (50% response), 15 s (90% response)^*2
Display amplifier averaging time			0.1 s / 10.0 s / 20.0 s / 30.0 s / 60.0 s / 120.0 s / 300.0 s
Measurement accuracy			±0.5°C ±0.9°F (pipe temperature −20 to +80°C –4 to 176°F) (ambient temperature of 25°C 77°F)^2^3 ±1.0°C ±1.8°F (pipe temperature 80–180°C 176–356°F) (ambient temperature of 25°C 77°F)^2^3
Hysteresis			Variable
Measurement principle			Pt100 4-wire type
Power I/O connector			M8 4-pin connector
Power supply	Current consumption		20 mA or less (excluding load current)^*4
When used standalone	I/O (switchable)	Output (Ch1/Ch2)	Control output: switching NPN/PNP setting Open collector output: 30 VDC or less, maximum 100 mA/ch or less, residual voltage 2.5 V or less^*5
		Analog output (Ch2)	4–20 mA / 0–20 mA (switchable), load resistance 260 Ω or less^*5
	Power voltage		20–30 VDC, ripple (P-P) 10% included; Class2/LPS^*5
	Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges^*5
	Network compatibility		IO-Link^6^5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient temperature		–10 to +60°C -14 to +140°F (no freezing)
	Relative humidity		35–85% RH (no condensation)
	Vibration resistance		10–500 Hz; power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance		100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Material	Display amplifier		PBT / PAR / POM / SUS303
	Sensor head		Head: PPS / SUS303 / Sn; Pipe clamp unit: SUS304; Cable: fluororesin
	Display amplifier mounting bracket		SUS304
Weight			Approx. 120 g 4.23 oz
^1 When pipe temperature is 100°C 212°F or more, the display amplifier cannot be mounted on the pipe clamp unit. Install the amplifier so it is insulated from the heat from the pipe. ^2 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes and fluid, the ambient temperature and other factors. ^3 This is the value for a constant 25°C 77°F environment, taking into account absolute error and repeatability. ^4 During standalone use, 220 mA or less including load. ^5 When connecting to a FD-H Series/FI-1000 model, please follow the specifications of the display unit. ^6 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO).

Keyence FI-T15 Keyence

4,157.00 kr

Only 1 unit left

Specifications

Model			FI-T15
Supported pipe diameter			3/8", 1/2" (10A, 15A) ø14–22 ø0.55"–0.87"
Supported pipe materials			Metal piping
Supported temperature range			−20 to +180°C –4 to +356°F^*1
Display method			Organic EL, status indicator light
Display resolution			0.1°C 32.18°F
Response time			5 s (50% response), 15 s (90% response)^*2
Display amplifier averaging time			0.1 s / 10.0 s / 20.0 s / 30.0 s / 60.0 s / 120.0 s / 300.0 s
Measurement accuracy			±0.5°C ±0.9°F (pipe temperature −20 to +80°C –4 to 176°F) (ambient temperature of 25°C 77°F)^2^3 ±1.0°C ±1.8°F (pipe temperature 80–180°C 176–356°F) (ambient temperature of 25°C 77°F)^2^3
Hysteresis			Variable
Measurement principle			Pt100 4-wire type
Power I/O connector			M8 4-pin connector
Power supply	Current consumption		20 mA or less (excluding load current)^*4
When used standalone	I/O (switchable)	Output (Ch1/Ch2)	Control output: switching NPN/PNP setting Open collector output: 30 VDC or less, maximum 100 mA/ch or less, residual voltage 2.5 V or less^*5
		Analog output (Ch2)	4–20 mA / 0–20 mA (switchable), load resistance 260 Ω or less^*5
	Power voltage		20–30 VDC, ripple (P-P) 10% included; Class2/LPS^*5
	Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges^*5
	Network compatibility		IO-Link^6^5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient temperature		–10 to +60°C -14 to +140°F (no freezing)
	Relative humidity		35–85% RH (no condensation)
	Vibration resistance		10–500 Hz; power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance		100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Material	Display amplifier		PBT / PAR / POM / SUS303
	Sensor head		Head: PPS / SUS303 / Sn; Pipe clamp unit: SUS304; Cable: fluororesin
	Display amplifier mounting bracket		SUS304
Weight			Approx. 80 g 2.82 oz
^1 When pipe temperature is 100°C 212°F or more, the display amplifier cannot be mounted on the pipe clamp unit. Install the amplifier so it is insulated from the heat from the pipe. ^2 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes and fluid, the ambient temperature and other factors. ^3 This is the value for a constant 25°C 77°F environment, taking into account absolute error and repeatability. ^4 During standalone use, 220 mA or less including load. ^5 When connecting to a FD-H Series/FI-1000 model, please follow the specifications of the display unit. ^6 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO).

Keyence FI-T100 Keyence

0.00 kr

Sold Out

Specifications

Model			FI-T100
Supported pipe diameter			2 1/2", 3", 3 1/2", 4" (65 A, 80 A, 90 A, 100 A) ø70–126 ø2.76"–4.96"
Supported pipe materials			Metal piping
Supported temperature range			−20 to +180°C –4 to +356°F^*1
Display method			Organic EL, status indicator light
Display resolution			0.1°C 32.18°F
Response time			5 s (50% response), 15 s (90% response)^*2
Display amplifier averaging time			0.1 s / 10.0 s / 20.0 s / 30.0 s / 60.0 s / 120.0 s / 300.0 s
Measurement accuracy			±0.5°C ±0.9°F (pipe temperature −20 to +80°C –4 to 176°F) (ambient temperature of 25°C 77°F)^2^3 ±1.0°C ±1.8°F (pipe temperature 80–180°C 176–356°F) (ambient temperature of 25°C 77°F)^2^3
Hysteresis			Variable
Measurement principle			Pt100 4-wire type
Power I/O connector			M8 4-pin connector
Power supply	Current consumption		20 mA or less (excluding load current)^*4
When used standalone	I/O (switchable)	Output (Ch1/Ch2)	Control output: switching NPN/PNP setting Open collector output: 30 VDC or less, maximum 100 mA/ch or less, residual voltage 2.5 V or less^*5
		Analog output (Ch2)	4–20 mA / 0–20 mA (switchable), load resistance 260 Ω or less^*5
	Power voltage		20–30 VDC, ripple (P-P) 10% included; Class2/LPS^*5
	Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges^*5
	Network compatibility		IO-Link^6^5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient temperature		–10 to +60°C -14 to +140°F (no freezing)
	Relative humidity		35–85% RH (no condensation)
	Vibration resistance		10–500 Hz; power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance		100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Material	Display amplifier		PBT / PAR / POM / SUS303
	Sensor head		Head: PPS / SUS303 / Sn; Pipe clamp unit: SUS304; Cable: fluororesin
	Display amplifier mounting bracket		SUS304
Weight			Approx. 100 g 3.53 oz
^1 When pipe temperature is 100°C 212°F or more, the display amplifier cannot be mounted on the pipe clamp unit. Install the amplifier so it is insulated from the heat from the pipe. ^2 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes and fluid, the ambient temperature and other factors. ^3 This is the value for a constant 25°C 77°F environment, taking into account absolute error and repeatability. ^4 During standalone use, 220 mA or less including load. ^5 When connecting to a FD-H Series/FI-1000 model, please follow the specifications of the display unit. ^6 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO).

Keyence FI-C40F Keyence

0.00 kr

Sold Out

Specifications

Model		FI-C40F
Type		Pipe type
Attachment		FI-CF1/3, FI-CF2/4
Detection principle		Refractive index (surface light source)
Rated concentration range		Brix: 0–40% (nD: 1.32500–1.41000)
Display method		Status indicator light
Display range		Brix: 0–50%
Supported fluids		Non-corrosive aqueous solutions (such as water-soluble coolants, mold release agents, etc.)^*1
Supported fluid temperature		0–70°C 32–158°F (no freezing)
Connection diameter		FI-CF1: Rc3/4 (20 A); FI-CF3: NPT3/4 FI-CF2: Rc1 1/2 (40 A); FI-CF4: NPT1 1/2
Rated pressure range		1.0 MPa or less
Pressure resistance		2.0 MPa
Display resolution		Brix: 0.01/0.1% (default value: 0.1) (nD: 0.00001)
Response time		1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		Brix: ±0.2%^2^3 (nD: ±0.0003)
Concentration unit		Brix nD^*4
Temperature measurement accuracy		±1.0°C 1.8°F^*2
Power supply	Current consumption	25 mA or less
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient temperature	–10 to +60°C 14 to +140°F (no freezing)
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Material	Liquid end materials	Sensor element: sapphire Body: SCS16A; Gasket: FFKM
	Other materials	Body: SUS304; PPS indicator light: PPSU / TPU / PBT Cable: PVC
Weight		Approx. 410 g 14.46 oz
^1 Use water as the solvent, and use materials that are soluble in water. If the particles are not water soluble, such as with slurry, the refractive index may not change. ^2 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type, condition and temperature of the fluid used by the customer, as well as other factors. ^3 This is the value obtained when sucrose solution is used in a constant 20°C 68°F environment, and absolute error and repeatability is taken into account. ^4 When using solutions other than sucrose solutions, concentration can be adjusted via span adjustment.

Keyence FI-C20D Keyence

8,788.00 kr

Only 3 units left

Specifications

Model		FI-C20D
Type		Probe type
Attachment		—
Detection principle		Refractive index (surface light source)
Rated concentration range		Brix: 0–20% (nD: 1.32500–1.37000)
Display method		Status indicator light
Display range		Brix: 0–25%
Supported fluids		Non-corrosive aqueous solutions (such as water-soluble coolants, mold release agents, etc.)^*1
Supported fluid temperature		0–70°C 32–158°F (no freezing)
Connection diameter		—
Rated pressure range
Pressure resistance
Display resolution		Brix: 0.01/0.1% (default value: 0.1) (nD: 0.00001)
Response time		1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		Brix: ±0.2%^2^3 (nD: ±0.0003)
Concentration unit		Brix nD^*4
Temperature measurement accuracy		±1.0°C 1.8°F^*2
Power supply	Current consumption	25 mA or less
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient temperature	–10 to +60°C 14 to +140°F (no freezing)
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Material	Liquid end materials	Sensor element: synthetic quartz Body: aluminum die-cast (nickel chrome plating) / SUS304 Pipe: aluminum alloy (anodized); Gasket: FKM
	Other materials	Indicator light: PPSU / TPU / PBT Cable: PUR
Weight		Approx. 480 g 16.93 oz
^1 Use water as the solvent, and use materials that are soluble in water. If the particles are not water soluble, such as with slurry, the refractive index may not change. ^2 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type, condition and temperature of the fluid used by the customer, as well as other factors. ^3 This is the value obtained when sucrose solution is used in a constant 20°C 68°F environment, and absolute error and repeatability is taken into account. ^4 When using solutions other than sucrose solutions, concentration can be adjusted via span adjustment.

Keyence FD-H63F Keyence

12,935.00 kr

Only 1 unit left

Specifications

Model		FD-H63F
Type		Hose model
Supported pipe diameter		ø48–63 ø1.89"-2.48"
Supported pipe materials		Soft plastic piping, all hoses (braided hoses, pressure-resistant rubber hoses, etc.)^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–100°C 32–212°F (no freezing on pipe surface)^*2
Maximum rated flow		500 L/min 132.1 gal/min
Zero cut flow rate		5.0 L/min 1.3 gal/min (variable, initial value)
Detection principle		Delta TOF
Function for automatic correction for speed of sound in liquid		—
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 1)
	Integrated flow	0.01/0.1/1 (L) (default value: 1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		—
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^3^4
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		—
Network support		IO-Link^*5
Heat calculation function	Unit	MJ/h kW kBTU/h^*6
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*6
	Pulse output increments (MJ)	0.02–999.99^*6
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*7
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*8
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PPS/PET/PAR/SUS304; Cable: PVC Sensor element: special rubber; Mounting bracket: PPS/PBT/POM/SUS304/SUSXM7
Weight		approx. 1360 g 47.97 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^4 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^5 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^6 Can be used when two temperature sensors (sold separately) are connected. ^7 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^8 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence FD-H47F Keyence

16,934.00 kr

Only 2 units left

Specifications

Model		FD-H47F
Type		Hose model
Supported pipe diameter		ø33–47.9 ø1.299"-1.886"
Supported pipe materials		Soft plastic piping, all hoses (braided hoses, pressure-resistant rubber hoses, etc.)^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–100°C 32–212°F (no freezing on pipe surface)^*2
Maximum rated flow		300 L/min 79.3 gal/min
Zero cut flow rate		2.0 L/min 0.5 gal/min (variable, initial value)
Detection principle		Delta TOF
Function for automatic correction for speed of sound in liquid		—
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 1)
	Integrated flow	0.01/0.1/1 (L) (default value: 1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		—
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^3^4
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		—
Network support		IO-Link^*5
Heat calculation function	Unit	MJ/h kW kBTU/h^*6
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*6
	Pulse output increments (MJ)	0.02–999.99^*6
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*7
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*8
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PPS/PET/PAR/SUS304; Cable: PVC Sensor element: special rubber; Mounting bracket: PPS/PBT/POM/SUS304/SUSXM7
Weight		approx. 1130 g 39.86 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^4 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^5 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^6 Can be used when two temperature sensors (sold separately) are connected. ^7 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^8 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence FD-H32K Keyence

8,886.00 kr

Only 1 unit left

Specifications

Model		FD-H32K
Type		High-temperature model
Supported pipe diameter		1" (25A), ø28–37 ø1.10"-1.46" 1 1/4" (32A), ø37–44 ø1.46"-1.73"
Supported pipe materials		Metal piping, hard plastic piping^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–180°C 32–356°F (no freezing on pipe surface)^2^3
Maximum rated flow		1" (25A) : 200 L/min 52.8 gal/min 1 1/4" (32A) : 300 L/min 79.3 gal/min
Zero cut flow rate		1.0 L/min 0.3 gal/min (variable, initial value)
Detection principle		Delta TOF + Pulse Doppler
Function for automatic correction for speed of sound in liquid		Yes
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 1)
	Integrated flow	0.01/0.1/1 (L) (default value: 1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		Between 10 and 100% of F.S.: ±3.0% of RD^4^5 Between 0 and 10% of F.S.: ±0.3% of F.S.^4^5
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^4^6
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		—
Network support		IO-Link^*7
Heat calculation function	Unit	MJ/h kW kBTU/h^*8
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*8
	Pulse output increments (MJ)	0.02–999.99^*8
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*9
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*10
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PEEK/PPS/PET/PAR/SUS304 Sensor element: special rubber; Mounting bracket: SUS304/SUSXM7
Weight		approx. 680 g 23.99 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 When using with fluids at temperatures of 140°C 284°F or greater, equip with the separately sold ultra-high-temperature couplant FD-HK1/HK2/HK3. Furthermore, the display unit must be separated from the sensor based on the de-rating. ^4 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^5 This is the value for when the zero point is adjusted, for a constant 25°C 77°F environment, taking into account the linearity and span error. ^6 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^7 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^8 Can be used when two temperature sensors (sold separately) are connected. ^9 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^10 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence FD-H32F Keyence

18,237.00 kr

Only 4 units left

Specifications

Model		FD-H32F
Type		Hose model
Supported pipe diameter		ø23–32.9 ø0.91"-1.295"
Supported pipe materials		Soft plastic piping, all hoses (braided hoses, pressure-resistant rubber hoses, etc.)^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–100°C 32–212°F (no freezing on pipe surface)^*2
Maximum rated flow		200 L/min 52.8 gal/min
Zero cut flow rate		1.0 L/min 0.3 gal/min (variable, initial value)
Detection principle		Delta TOF
Function for automatic correction for speed of sound in liquid		—
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 0.1)
	Integrated flow	0.01/0.1/1 (L) (default value: 0.1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		—
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^3^4
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		—
Network support		IO-Link^*5
Heat calculation function	Unit	MJ/h kW kBTU/h^*6
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*6
	Pulse output increments (MJ)	0.02–999.99^*6
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*7
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*8
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PPS/PET/PAR/SUS304; Cable: PVC Sensor element: special rubber; Mounting bracket: PPS/PBT/POM/SUS304/SUSXM7
Weight		approx. 880 g 31.04 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^4 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^5 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^6 Can be used when two temperature sensors (sold separately) are connected. ^7 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^8 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence FD-H32 Keyence

12,564.00 kr

In stock, 14 units

Specifications

Model		FD-H32
Type		Standard model
Supported pipe diameter		1" (25A), ø28–37 ø1.10"-1.46" 1 1/4" (32A), ø37–44 ø1.46"-1.73"
Supported pipe materials		Metal piping, hard plastic piping^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–85°C 32–185°F (no freezing on pipe surface)^*2
Maximum rated flow		1" (25A) : 200 L/min 52.8 gal/min 1 1/4" (32A) : 300 L/min 79.3 gal/min
Zero cut flow rate		1.0 L/min 0.3 gal/min (variable, initial value)
Detection principle		Delta TOF + Pulse Doppler
Function for automatic correction for speed of sound in liquid		Yes
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 1)
	Integrated flow	0.01/0.1/1 (L) (default value: 1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		Between 10 and 100% of F.S.: ±3.0% of RD^3^4 Between 0 and 10% of F.S.: ±0.3% of F.S.^3^4
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^3^5
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		±2.0°C ±3.5°F (pipe temperature 0–50°C 32–122°F) , ±3.0°C ±5.4°F (pipe temperature 50–85°C 122–185°F) (ambient temperature of 25°C 77°F)^*3
Network support		IO-Link^*6
Heat calculation function	Unit	MJ/h kW kBTU/h^*7
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*7
	Pulse output increments (MJ)	0.02–999.99^*7
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*8
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*9
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PPS/PET/PAR/SUS304 Sensor element: special rubber; Mounting bracket: SUS304/SUSXM7
Weight		approx. 620 g 21.87 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^4 This is the value for when the zero point is adjusted, for a constant 25°C 77°F environment, taking into account the linearity and span error. ^5 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^6 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^7 Can be used when two temperature sensors (sold separately) are connected. ^8 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^*9 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence FD-H22F Keyence

11,084.00 kr

Only 7 units left

Specifications

Model		FD-H22F
Type		Hose model
Supported pipe diameter		ø13–22.9 ø0.51"-0.90"
Supported pipe materials		Soft plastic piping, all hoses (braided hoses, pressure-resistant rubber hoses, etc.)^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–100°C 32–212°F (no freezing on pipe surface)^*2
Maximum rated flow		60 L/min 15.9 gal/min
Zero cut flow rate		0.5 L/min 0.13 gal/min (variable, initial value)
Detection principle		Delta TOF
Function for automatic correction for speed of sound in liquid		—
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 0.1)
	Integrated flow	0.01/0.1/1 (L) (default value: 0.1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		—
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^3^4
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		—
Network support		IO-Link^*5
Heat calculation function	Unit	MJ/h kW kBTU/h^*6
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*6
	Pulse output increments (MJ)	0.02–999.99^*6
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*7
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*8
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PPS/PET/PAR/SUS304; Cable: PVC Sensor element: special rubber; Mounting bracket: PPS/PBT/POM/SUS304/SUSXM7
Weight		approx. 770 g 27.16 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^4 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^5 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^6 Can be used when two temperature sensors (sold separately) are connected. ^7 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^8 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence FD-H20K Keyence

17,104.00 kr

Only 3 units left

Specifications

Model		FD-H20K
Type		High-temperature model
Supported pipe diameter		1/2" (15A), ø18–23 ø0.71"-0.91" 3/4" (20A), ø23–28 ø0.91"-1.10"
Supported pipe materials		Metal piping, hard plastic piping^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–180°C 32–356°F (no freezing on pipe surface)^2^3
Maximum rated flow		1/2" (15A) : 60 L/min 15.9 gal/min 3/4" (20A) : 100 L/min 26.4 gal/min
Zero cut flow rate		0.5 L/min 0.13 gal/min (variable, initial value)
Detection principle		Delta TOF + Pulse Doppler
Function for automatic correction for speed of sound in liquid		Yes
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 0.1)
	Integrated flow	0.01/0.1/1 (L) (default value: 0.1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		Between 10 and 100% of F.S.: ±3.0% of RD^4^5 Between 0 and 10% of F.S.: ±0.3% of F.S.^4^5
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^4^6
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		—
Network support		IO-Link^*7
Heat calculation function	Unit	MJ/h kW kBTU/h^*8
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*8
	Pulse output increments (MJ)	0.02–999.99^*8
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*9
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*10
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PEEK/PPS/PET/PAR/SUS304 Sensor element: special rubber; Mounting bracket: SUS304/SUSXM7
Weight		approx. 540 g 19.05 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 When using with fluids at temperatures of 140°C 284°F or greater, equip with the separately sold ultra-high-temperature couplant FD-HK1/HK2/HK3. Furthermore, the display unit must be separated from the sensor based on the de-rating. ^4 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^5 This is the value for when the zero point is adjusted, for a constant 25°C 77°F environment, taking into account the linearity and span error. ^6 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^7 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^8 Can be used when two temperature sensors (sold separately) are connected. ^9 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^10 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence FD-H20 Keyence

9,374.00 kr

Only 6 units left

Specifications

Model		FD-H20
Type		Standard model
Supported pipe diameter		1/2" (15A), ø18–23 ø0.71"-0.91" 3/4" (20A), ø23–28 ø0.91"-1.10"
Supported pipe materials		Metal piping, hard plastic piping^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–85°C 32–185°F (no freezing on pipe surface)^*2
Maximum rated flow		1/2" (15A) : 60 L/min 15.9 gal/min 3/4" (20A) : 100 L/min 26.4 gal/min
Zero cut flow rate		0.5 L/min 0.13 gal/min (variable, initial value)
Detection principle		Delta TOF + Pulse Doppler
Function for automatic correction for speed of sound in liquid		Yes
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 0.1)
	Integrated flow	0.01/0.1/1 (L) (default value: 0.1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		Between 10 and 100% of F.S.: ±3.0% of RD^3^4 Between 0 and 10% of F.S.: ±0.3% of F.S.^3^4
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^3^5
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		±2.0°C ±3.5°F (pipe temperature 0–50°C 32–122°F) , ±3.0°C ±5.4°F (pipe temperature 50–85°C 122–185°F) (ambient temperature of 25°C 77°F)^*3
Network support		IO-Link^*6
Heat calculation function	Unit	MJ/h kW kBTU/h^*7
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*7
	Pulse output increments (MJ)	0.02–999.99^*7
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*8
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*9
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PPS/PET/PAR/SUS304 Sensor element: special rubber; Mounting bracket: SUS304/SUSXM7
Weight		approx. 480 g 16.93 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^4 This is the value for when the zero point is adjusted, for a constant 25°C 77°F environment, taking into account the linearity and span error. ^5 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^6 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^7 Can be used when two temperature sensors (sold separately) are connected. ^8 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^*9 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence FD-H10K Keyence

7,740.00 kr

Only 1 unit left

Specifications

Model		FD-H10K
Type		High-temperature model
Supported pipe diameter		1/4" (8A), ø13–16 ø0.51"-0.63" 3/8" (10A), ø16–18 ø0.63"-0.71"
Supported pipe materials		Metal piping, hard plastic piping^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–180°C 32–356°F (no freezing on pipe surface)^2^3
Maximum rated flow		1/4" (8A) : 20 L/min 5.3 gal/min 3/8" (10A) : 30 L/min 7.9 gal/min
Zero cut flow rate		0.3 L/min 0.08 gal/min (variable, initial value)
Detection principle		Delta TOF + Pulse Doppler
Function for automatic correction for speed of sound in liquid		Yes
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 0.1)
	Integrated flow	0.01/0.1/1 (L) (default value: 0.1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		Between 10 and 100% of F.S.: ±3.0% of RD^4^5 Between 0 and 10% of F.S.: ±0.3% of F.S.^4^5
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^4^6
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		—
Network support		IO-Link^*7
Heat calculation function	Unit	MJ/h kW kBTU/h^*8
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*8
	Pulse output increments (MJ)	0.02–999.99^*8
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*9
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*10
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PEEK/PPS/PET/PAR/SUS304 Sensor element: special rubber; Mounting bracket: SUS304/SUSXM7
Weight		approx. 490 g 17.28 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 When using with fluids at temperatures of 140°C 284°F or greater, equip with the separately sold ultra-high-temperature couplant FD-HK1/HK2/HK3. Furthermore, the display unit must be separated from the sensor based on the de-rating. ^4 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^5 This is the value for when the zero point is adjusted, for a constant 25°C 77°F environment, taking into account the linearity and span error. ^6 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^7 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^8 Can be used when two temperature sensors (sold separately) are connected. ^9 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^10 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence FD-H10 Keyence

9,824.00 kr

Only 5 units left

Specifications

Model		FD-H10
Type		Standard model
Supported pipe diameter		1/4" (8A), ø13–16 ø0.51"-0.63" 3/8" (10A), ø16–18 ø0.63"-0.71"
Supported pipe materials		Metal piping, hard plastic piping^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–85°C 32–185°F (no freezing on pipe surface)^*2
Maximum rated flow		1/4" (8A) : 20 L/min 5.3 gal/min 3/8" (10A) : 30 L/min 7.9 gal/min
Zero cut flow rate		0.3 L/min 0.08 gal/min (variable, initial value)
Detection principle		Delta TOF + Pulse Doppler
Function for automatic correction for speed of sound in liquid		Yes
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 0.1)
	Integrated flow	0.01/0.1/1 (L) (default value: 0.1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		Between 10 and 100% of F.S.: ±3.0% of RD^3^4 Between 0 and 10% of F.S.: ±0.3% of F.S.^3^4
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^3^5
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		±2.0°C ±3.5°F (pipe temperature 0–50°C 32–122°F) , ±3.0°C ±5.4°F (pipe temperature 50–85°C 122–185°F) (ambient temperature of 25°C 77°F)^*3
Network support		IO-Link^*6
Heat calculation function	Unit	MJ/h kW kBTU/h^*7
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*7
	Pulse output increments (MJ)	0.02–999.99^*7
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*8
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*9
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PPS/PET/PAR/SUS304 Sensor element: special rubber; Mounting bracket: SUS304/SUSXM7
Weight		approx. 440 g 15.52 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^4 This is the value for when the zero point is adjusted, for a constant 25°C 77°F environment, taking into account the linearity and span error. ^5 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^6 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^7 Can be used when two temperature sensors (sold separately) are connected. ^8 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^*9 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence OP-91147 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-91147
Emissivity				0.95
Allowable temperature limit				356°F (180°C)
Size				Width: 50 mm 1.97", length: 10 m 32.81'
Note				Sold separately
Weight				Approx. 145 g

Keyence OP-84290 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FT-S2 Keyence

0.00 kr

Sold Out

Specifications

Model				FT-S2
Infrared transmissivity				85% or more ^*1
Material				Cap: aluminum, lens: germanium, O-ring: NBR
Note				Sold separately
Weight				Approx. 32 g
^*1 Infrared transmissivity for wavelength of 8 to 14 μm.

Keyence FT-S1 Keyence

8,156.00 kr

Only 4 units left

Specifications

Model		FT-S1 ^*1
Air supply	Recommended flow rate	15ℓ/min
	Withstanding pressure	1 MPa or less (at inlet)
Conforming tube diameter		ø6 mm 0.24"
Material		Housing: zinc, cap: aluminum, cable packing and O-ring: NBR, fitting: Brass nickel-plated
Note		Sold separately
Weight		Approx. 700 g
^*1 FT-S1 does not provide cooling.

Keyence OP-82488 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-82488
Type				Power cable
Applicable product				FT Series
Length				2 m 6.56'
Note				Included with amplifier
Weight				Approx. 55 g

Keyence FT-H50K Keyence

13,010.00 kr

Only 5 units left

Specifications

Model		FT-H50K
Type		High temperature, Ultra long-range
Rated temperature range		32 to 2462°F (0 to 1350°C) ^*1
Displayable temperature range		-58 to 2552°F (-50 to +1400°C)°C
Detecting distance		Unlimited ^*2
Measuring distance / View diameter (example)		500/ø18 mm 15.69"/ø0.71" 1500/ø30 mm 59.06"/ø1.18" 3000/ø75 mm 118.11"/ø2.95"
Sight		2-point visible laser beam ^*3
Detecting element		Thermopile
Detecting wavelength		8 to 14 μm
Repeatability		±5.4°F (±3°C)
Emissivity (ε) correction		0.10 to 1.99 (0.01 step)
Environmental resistance	Ambient temperature	14 to 131°F (-10 to 55°C), No freezing
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
	Shock resistance	500 m/s², 10 times in each direction of each axis (X, Y, Z), 60 times in total
Material		Case: Reinforced glass plastic, Infrared collector lens: Germanium, Laser transmitter: Polyarylate, Lens tube: Aluminum, Cable: Vinyl chloride, Mounting bracket: SUS304, Mounting screw: Stainless steel
Accessory		Mounting bracket
Weight		Approx. 150g
^1 Repeatability is guaranteed within the rated temperature range. ^2 Place at a distance so that object appears 1.5 times larger than the view diameter. ^*3 Visible semiconductor laser beam wavelength 655 nm, Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10). The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice.

Previous Page 2 / 25Next