Machine Vision Systems

5,773.00 kr

Only 2 units left

Specifications

Model				OP-87286
Type				Adapter Rc1/2 Female
Overview				Tee adapter can be connected to GP-M Series. The both sides are connectable to Rc1/2 female.
Applicable product				GP-M Series sensor main unit
Number included				1 pcs.
Connection port				G3/4 female on pressure sensor side and Rc1/2 female x 2 on tube side
Material				SUS304

Keyence FU-87K Keyence

6,195.00 kr

Only 1 unit left

Specifications

Model		FU-87K^*1
Heat resistant temperature		200°C 392°F^*2
Fibre unit length		1 m39.37" cannot be cut
Minimum bend radius		R8 mm0.315"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*3
Environmental resistance	Ambient temperature	-40 to +200 °C -40 to 392 °F
Weight		Approx. 15 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 Use in a dry state. Also, when using the heat resistant type, make a selection with ample room for the ambient temperature. ^*3 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence AH-110 Keyence

3,098.00 kr

Only 5 units left

Specifications

Model			AH-110
Type			General-use sensor head
Amplifier unit			AS-440-02
Shape			M10 threaded
Measuring range			0 to 2mm0.08"
Analog output voltage	Output voltage		0 to 2V
	Straight line range		―
	Impedance		100 Ω
	Resolution		0.1% of F.S.
	Linearity		±1% of F.S.
	Response		3.3 kHz (-3 dB)
Temperature fluctuation	Sensor head		0.03% of F.S./°C^*1
Temperature characteristics	Amplifier unit		0.05% of F.S./°C^*1
Rating	Power voltage		110/120/220/240 VAC ±10 %, 50/60 Hz
	Power consumption		5VA
Environmentalresistance	Enclosure rating	Sensor head	IP67
	Operating ambient temperature		-10 to +60°C 14 to 140°F, No freezing
		Amplifier unit	0 to +50°C 32 to 122°F
Environmental resistance	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight	Sensor head		Approx 55g
Weight (including cord)	Amplifier unit		Approx 320g
^*1 When the distance between the sensor head and the target is within 50% of the measurement range.

Keyence OP-88281 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88281
Length				3 m 9.8'

Keyence LS-C3A Keyence

2,522.00 kr

Only 6 units left

Specifications

Model				LS-C3A
Type				Cable between the controller and measuring head
Applicable product				LS-7000 series
Number included				1
Cable end				Straight
Length				3 m 9.8'
Note				Up to two cables are connectable, provided that the total length is a maximum of 40 m 131.2'.
Weight				Approx. 250 g

Keyence DT-500 Keyence

14,504.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DRM20PA Keyence

15,005.00 kr

Only 2 units left

Specifications

Model				CA-DRM20PA
Type				200 mm 7.87" type

Keyence GV-H1000 Keyence

4,071.00 kr

Only 7 units left

Specifications

Model			GV-H1000
Type			Ultra long-range
Light source			Visible semiconductor laser, Wavelength: 655 nm
Laser class	FDA (CDRH) Part 1040.10		Class 2 (560 µW)
	IEC 60825-1
	JIS C6802
Detection distance (Amplifier display )			200 to 1000 mm 7.87" to 39.37" (800 to 0)^*1)
Possible display range			810 to -175
Standard detection deviation			20 mm 0.79" (Detection distance 200 to 800 mm 7.87" to 31.5") 30 mm 1.18" (Detection distance 800 to 1000 mm 31.5" to 39.37")
Spot diameter			Approx. ø1.8 mm ø0.07" (Detection distance 1000 mm 39.37")
Operation status indicators			Control output: Red LED/Laser radiation emission indicator: Green LED/1 spot indicator: Green LED
Environmental resistance	Enclosure rating		IP67
	Operating ambientluminance	Incandescent lamp	5000ℓx
		Sunlight	10000ℓx^*2
	Ambient temperature		-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material			Housing material: PBT, Display: Polyarylate, Metal: SUS304, Lens cover: Glass, Cable: PVC
Weight			Approx. 210 g^*3
^1 General guideline for amplifier display values relative to detection distance (when distance display mode is set to normal). ^2 Incandescent lamp: 5000 lux, Sunlight: 3000 lux for GV-H1000 (When the response time is set to 10 ms or faster) ^*3 Including 2 m 6.6' connector cable (3 m 9.8' cable for GV-H1000)

Keyence TM-040 Keyence

79,569.00 kr

Only 2 units left

Specifications

Model		TM-040
Measuring range		ø40 mm 1.57"
Minimum detectable object		0.3 mm 0.01"
Transmitter/receiver distance		180 mm 7.09"
Light source		InGaN Green LED
Measurement accuracy		±2 µm 0.000079" ^*1
Repeatability		±0.15 µm ±0.000006" ^*2
Sampling cycle (trigger interval)		5.5ms (33ms at the initial setting)^*3
Environmental resistance	Enclosure rating	IP64^*4
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Aluminum
Weight	Transmitter	Approx 560 g
	Receiver	Approx 720 g
	Base	Approx 630 g
^1 In a measurement area of 10 mm 0.39"× ø26 mm ø1.02" error when measuring width of KEYENCE standard object (glass calibration scale). ^2 Value of ±2σ measuring the width of KEYENCE standard object (glass calibration scale) in the center of the measurement area, an average 16 times, average 8 mm 0.31" line. ^3 When measurement area is minimum, others are initial settings ^4 Apart from connector component

Keyence OP-88292 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88292
Type				Sensor head-controller extension cable, 2 m 6.56 '
Applicable product				FD-XS1/XS8/XS20
Length				2 m
Note				A cable that further extends the 2 m 6.56 ' cable between the sensor head's relay amp and the controller. Connectors are on both ends. * The cable between the relay amp and controller can be extended up to 12 m 39.37 ' long.
Weight				Approx. 110 g

Keyence OP-85499 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-85499
Overview				This is a connector cable for the M8 connector sensor. This connector cable is made of polyurethane (PUR), which has excellent oil resistance.
Applicable product				M8 connector for PZ-G standard (Rectangular) models
Number included				1 pcs.
Cable end				M8 straight - Loose wire
Length				2 m 6.56'
Material				Cable: Polyurethane (PUR)
Weight				Approx. 65 g

Keyence LX2-70W Keyence

6,579.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence NR-500 Keyence

9,179.00 kr

Only 9 units left

Specifications

Model		NR-500
Type		Interface unit
External calibration input signal	Trigger input TRG IN	Voltage input: 10 to 30 VDC, Min. pulse duration: 2 ms, Effective pulse width: 1 ms or more
	Synchronization input SYNC IN	Voltage input: 5 VDC ±10%, Min. pulse duration: 20 µs, Effective pulse width: 10 µs or more
Control output	Trigger output TRG OUT	NPN open collector output: 1 ch, Maximum current: 100 mA (30 V or less), Residual voltage: 1 V or less, One-shot output
Withstand voltage	Between I/O and USB/DC IN/system bus	1500 VAC (50/60 Hz) for 1 minute
	Between trigger input and output	125 VAC (50/60 Hz) for 1 minute
PC interface	USB	USB Revision 2.0 High-speed–compliant (USB 1.1 compatible), Simultaneous USB connection from one PC to up to four units (switchable by ID switch)
Continuous collection speed		Max. 100 kHz for all acquisition channels
No. of connectable measurement units		8 units or less (not exceeding 20 W total measurement unit power)
Synchronization between measurement units		±1 µs or less^*1
Time axis accuracy		±50 ppm (23°C ±3°C 73.4°F ±5.4°F)
Power supply		NR-U5 AC adapter or USB bus power (NR-TH08, NR-C512, NR-EN16 (no power output): when connecting one unit)
Rating	Power consumption	0.9 W or less
Environmental resistance	Ambient temperature	0 to +40°C 32°F to 104°F
	Relative humidity	10 to 85% RH (no condensation)
Weight		Approx. 110 g 3.88 oz (including OP-51581: NR-500 5-pole terminal block)
^*1 When using the NR-CA04 in combination with other unit types, the maximum sampling period is 40 ms or 1 sampling cycle, depending on the setting.

Keyence OP-88589 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF25R Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88294 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88294
Type				Securing bracket for plastic clamp set
Applicable product				FD-XC1R1/XC1R2 FD-XC8R1/XC8R2/XC8R3 FD-XC20R1/XC20R2/XC20R3/XC20R4
Material				PPS
Note				For securing the plastic clamp set to a jig, etc. Use when clamping to a soft plastic tube.
Weight				Approx. 55 g

Keyence GL-VM04LP Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM04LP
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			4
Total length			160 mm 6.30"
Detection height			120 mm 4.72"
Protection height			205 mm 8.07"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.1
		OFF→ON	45.7 ^*3
		All blocked→ON	51.2 ^*4
	With channel A or B	ON→OFF	9.7
		OFF→ON	52.8 ^*3
		All blocked→ON	65.5 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	54 ^*5
		Receiver	68 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	47 ^*5
		Receiver	55 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		120 g 4.23 oz
	Receiver
	Total		240 g 8.47 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence BT-CG35GA Keyence

0.00 kr

Sold Out

Specifications

Model		BT-CG35GA
Charging unit	Charging time	Approx 3 hours (at room temperature)
Charging	Confirmation LED	2-color LED (red: charging, green: completed)
Dedicated AC adapter specifications	Input side	100 to 240 VAC, 50/60 Hz
	Output side	12 VDC, Max. 1.5 A
Dimensions	Dedicated AC adapter specifications	104 x 43 x 31 mm 4.09" x 1.69" x 0.12 (not including the cable)
Weight		Approx. 125 g
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-20 to +60 °C -4 to 140 °F (No freezing)
	Storage relative humidity	35 to 85 % RH (No condensation)
Accessory		AC adapter (OP-88020)^*1
Dimensions		214 x 83 x 79.2 mm 8.43" x 3.27" x 3.12"
Weight		Approx. 500 g
^*1 A separate AC cable is required.

Keyence AP-31KP Keyence

4,084.00 kr

Only 5 units left

Specifications

Model		AP-31KP
Type		Negative pressure, PNP
Rated pressure		0 to -29.9 inchHg
Fluid type		Air or non-corrosive gases
Type of pressure		Gauge pressure
Display		3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm 0.43")
Display resolution		0.1 inchHg, 0.1 kPa, 1 mmHg, 0.001 bar
Detectable pressure range		-15 to +110 % of F.S.
Display temperature characteristic		±1 % max. (of F.S.) of detecting pressure at 25 °C 77 °F (0 to 50 °C 32 to 122 °F)
Response time (Chattering prevention function)		2.5/5/100/500 ms (selectable)
I/O	Analog output	1 to 5 V (Load impedance: 47 kΩ min.)
	Control output	PNP open-collector 100 mA max. (30 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable)
Rating	Power voltage	12 to 24 VDC ±10 %
	Current consumption	50 mA (at 24 V) or less, 90 mA (at 12 V) or less
Environmental resistance	Pressure resistance	72.5 PSI
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable
Weight		Approx. 120 g

Keyence CA-CF10E Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-SA32S Keyence

0.00 kr

Sold Out

Specifications

Model				GL-SA32S
Type				Protection cover Slim type for 32 beam axes
Overview				This protective case protects the main unit from impacts.
Applicable product				GL-S32SH
Number included				1
Length				662.6 mm 26.09"
Material				aluminum
Note				2 each of the following are included: hexagon socket head cap screw (width across flats: 3 mm), washer, and special hexagon socket head cap screw (M4, length: 13 mm, width across flats: 3 mm).
Weight				210 g

Keyence GL-SB02 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-SB02
Type				Intermediate support brackets for mounting to a flat surface
Applicable product				GL-S Series main unit
Number included				2
Material				SUS304
Weight				15 g

Keyence KV-N16ETP Keyence

0.00 kr

Sold Out

Specifications

Model			KV-N16ETP
Expansion output unit	Output Points		16 points
	External connectionmethod		MOSFET With overcurrent protection function ^1 ^2
	External connection method		Terminal block
	Rated load		30 VDC, 0.5 A
	Leakage current (when output is OFF)		100 μA or less
	Residual voltage (at ON)		0.8 VDC or less (with 0.5 A output) 0.6 VDC or less (with 0.3 A output)
	ON resistance		−
	Common method		16 points/1 common (8 terminals) ^3 ^4
	Response time	OFF to ON	100 μs or less (with a load of 1 mA or more)
		ON to OFF	200 μs or less (with a load of 1 mA or more)
	Relay life		−
	Relay replacement
Internal current consumption			40 mA or less
Weight			Approx. 210 g
^1 If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common (The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 007 or 008 to 015 for the case of the KV-N16ET(P).) , until the cause of the problem is removed. ^2 MOSFET (N-ch) output for the sink output type; and MOSFET (P-ch) output for the source output type. ^3 The KV-N8ET(P) and KV-N16ET(P) COM terminals are shorted internally. ^4 The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 007 or 008 to 015 for the case of the KV-N16ET(P).

Keyence CA-H2100M Keyence

9,913.00 kr

In stock, 13 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.