Machine Vision Systems

0.00 kr

Sold Out

Specifications

Model				OP-35382
Overview				Cable for RS-232C communication. (includes communication cable 9-pin conversion connector).
Applicable product				CV-100, CV-300, CV-500, CV-700
Length				3 m 9.84'

Keyence EV-112MSO(2062) Keyence

0.00 kr

Sold Out

Specifications

Model		EV-112MSO (2062)
Type		Shielded
Shape		M12
Detecting distance		2.5 mm 0.10" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		12 x 12 mm 0.47" x 0.47"
Hysteresis		10% max. of detecting distance
Response frequency		600 Hz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -25 to +70°C -13 to +158°F
Control output (switching capacity)		5 to 200 mA
Protection circuit		Reversed polarity, short-circuit, surge voltage
Cable length		500 mm19.685"
Rating	Power voltage	12 to 24 VDC
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Case material		Nickel-plated brass
Weight		Approx. 55 g

Keyence CA-LMHE0510 Keyence

27,344.00 kr

Only 5 units left

Specifications

Model		CA-LMHE0510 ^*1
Optical magnification		×0.5 to ×1.0
WD (at reference magnification)		×0.5: 80.0 mm 3.15" ×1.0: 81.8 mm 3.22" ^*2
Compatible image sensor size		4/3" (ø23 mm ø0.91")
Field of view		20.5 mm × 25.5 mm to 10.2 mm × 12.8 mm 0.81" × 1.00" to 0.40" × 0.50" (With CA-HF2100x connected)
F-stop range (aperture)		5.0 to 32
Resolution		×0.5: 6.7 μm 0.26 Mil ×1.0: 3.4 μm 0.13 Mil ^*3
Resolving power		Center/periphery: 120 cycles/mm
TV distortion		0.10 %
Depth-of-field		×0.5: 5.12 mm 0.20" ×1.0: 1.28 mm 0.05" ^*4
Mount		C-mount
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	80% RH or less (no condensation)
Weight		Approx. 1050 g 2.31 lb
^1 Depending on factors such as the installation orientation and the vibrations of the environment, consider reinforcing the installation such as by implementing countermeasures to hold the lens in place. For information on the locations to hold the lens in place, see the installation examples. The above values were calculated according to optical design values. Actual values for individual lenses will differ according to precision of assembly. ^2 WD indicates the distance from the tip of the lens to the workpiece. Changing the magnification changes this distance. ^3 The smallest resolvable feature able to be detected under 550 nm wavelength light. ^4 The depth-of-field is a theoretical value calculated with an F-stop of 16 and a circle of least confusion of 40 μm 1.57 Mil. This varies depending on the F-stop.

Keyence XM-P5000 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence RK-10AYC Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LV-H65 Keyence

2,638.00 kr

Only 9 units left

Specifications

Model		LV-H65
Type		Wide
FDA (CDRH) Part 1040.10		Class II
Light source		Visible red semiconductor laser
Wavelength		660 nm
Detecting distance	FINE	100 mm 3.94" (150 mm5.91")^*1
	TURBO	10 to 150 mm 0.39" to 5.91" (10 to 250 mm 0.39" to 9.84")^*1
	SUPER	100 to 200 mm 3.94" to 7.87" (150 to 350 mm 5.91" to 13.78")^*1
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
Material	Case	Reinforced glass/plastic
	Lens cover	Norbornene plastic
	Reflective mirror	Polycarbonate, acrylic
Weight		Approx. 45 g
^*1 The parentheses indicate the detecting distance when OP-51428 is used.

Keyence DL-NS1 Keyence

8,917.00 kr

Only 1 unit left

Specifications

Model		DL-NS1
Cable connector		M12 Male
USB connector		USB TypeA
USB Communication		USB2.0 Full Speed
Interface		USB-COM
OS		Windows 11 Home/Pro/Enterprise (32bit/64bit) Windows 10 Home/Pro/Enterprise (32bit/64bit) One OS must be installed.
Control input	The number of input	2
	Input type	Voltage input
	Maximum rating	26.4V
	Minmum ON voltage	DC15V
	Maximum OFF current	0.2mA
Control output	The number of output	2
	Output type	Photo relay output
	Control output current	30VDC 50mA max.per output
	Maximum leak current	0.1mA max.
	Maximum residual voltage	1V max.
Switch input	Input type	No-voltage input
	Supplied voltage	Approx. 5V
	Supplied current	10mA max.
Power voltage		USB bus power
Power consumption		100mA max.
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main unit：Polycarbonate(PC)、Cable：PVC
Weight		Approx. 45 g (including the cable)

Keyence FT-H50 Keyence

4,721.00 kr

Only 7 units left

Specifications

Model		FT-H50
Type		Mid to low temperature, Ultra long-range
Rated temperature range		32 to 932°F (0 to 500°C) ^*1
Displayable temperature range		-58 to +968°F (-50 to +520°C)
Detecting distance		Unlimited ^*2
Measuring distance / View diameter (example)		500/ø18 mm 19.69"/ø0.71" 1500/ø30 mm 59.06"/ø1.18" 3000/ø75 mm 118.11"/ø2.95"
Sight		2-point visible laser beam ^*3
Detecting element		Thermopile
Detecting wavelength		8 to 14 μm
Repeatability		±5.4°F (±3°C)
Emissivity (ε) correction		0.10 to 1.99 (0.01 step)
Environmental resistance	Ambient temperature	14 to 131°F (-10 to 55°C), No freezing
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
	Shock resistance	500 m/s², 10 times in each direction of each axis (X, Y, Z), 60 times in total
Material		Case: Reinforced glass plastic, Infrared collector lens: Germanium, Laser transmitter: Polyarylate, Lens tube: Aluminum, Cable: Vinyl chloride, Mounting bracket: SUS304, Mounting screw: Stainless steel
Accessory		Mounting bracket
Weight		Approx. 150g
^1 Repeatability is guaranteed within the rated temperature range. ^2 Place at a distance so that object appears 1.5 times larger than the view diameter. ^*3 Visible semiconductor laser beam wavelength 655 nm, Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10). The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice.

Keyence CA-DQW15 Keyence

19,693.00 kr

Only 1 unit left

Specifications

Model				CA-DQW15
Type				Square Light (Direct)
LED color				White
Diffusion plate				OP-87042^*1
Power consumption				19.2 W^*2
Input voltage				12 VDC
Weight				Approx. 520 g
^1 These models are for a single bar. Four sets are required for the whole square. ^2 Total value of four bars

Keyence OP-88392 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88392^*1
Type				Separate system
Length				15 m 49.21'
Material				PVC
Weight				Approx. 600 g
^*1 The unit connection cable for a vertical integrated system is included with the flow meter.

Keyence OP-42339 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88604 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R24L Keyence

13,087.00 kr

Only 5 units left

Specifications

Model			GL-R24L
Detection capability			ø1.77" ø45 mm
Total length			37.80" 960mm
No. of beam			24
Detection height			36.22" 920mm
Protection height			39.57" 1005mm
Beam axis spacing/Lens diameter			40 mm / ø5 1.57" / ø0.20"
Detecting distance			0.66 to 49.21' 0.2 to 15 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	7
		OFF→ON	49.3^*2
		All blocked→ON	64.9^*3
	Optical synchronization system (Channel A or B)	ON→OFF	9.5
		OFF→ON	53^*2
		All blocked→ON	74.7^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	57
		Receiver	76
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1330 g
	Receiver		1340 g
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence CA-H200M Keyence

12,813.00 kr

Only 10 units left

Specifications

Model		CA-H200M
Image element		Monochrome CMOS, 7×/16× high-speed reading using square-pixel
Unit cell size		4.5 µm × 4.5 µm 0.18 Mil × 0.18 Mil
Valid pixel count		2 megapixel mode: 1600 (H) × 1200 (V), 1 megapixel mode: 1024 (H) × 960 (V)
Image size		Equivalent to 1/1.8"
Scanning system		Progressive At 7× transfer speed: 28.9 ms^1, At 16× transfer speed: 11.8 ms^2
Pixel transfer frequency		At 7× transfer speed: 86 MHz (43 MHz × 2)^1, At 16× transfer speed: 198 MHz^2
Transfer system		Digital serial transfer
Electronic shutter		Can be set to 0.05 to 9000 msec by specifying the following numerical inputs: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000
Lens mount		C-mount
Enclosure rating		IP64^*3
Environmental resistance	Ambient temperature	0 to 45°C 32 to 113°F
	Relative humidity	85% RH or less
Weight		Approx. 75 g (not including lens)
^1 Transfer speed setting: Standard ^2 Transfer speed setting: Fast ^*3 A KEYENCE-specified IP64-rated lens and environment-resistant cable must be used on the product.

Keyence GS-B41 Keyence

0.00 kr

Sold Out

Specifications

Model				GS-B41
Type				Locking type
Weight				Approx. 380 g

Keyence DL-RS1A Keyence

2,939.00 kr

In stock, 11 units

Specifications

Model		DL-RS1A^*1
Synchronization between the transmitter and receiver		Asynchronous
Transmission code		ASCII
Baud rate		2,400/4,800/9,600/19,200/38,400 bps selectable (Factory-setting: 9,600 bps)
Data bit length		8 bits/7 bits selectable (Factory-setting: 8 bits)
Parity check		None/Even/Odd selectable (Factory-setting: None)
Stop bit length		1 bit
Data delimiter		Data reception: automatically recognizes CR or CR+LF Data transmission: Fixed to CR+LF
Indicator		Communication indicator lamp (green x 2), Alarm indicator lamp (red), Power indicator lamp (green)
Sensor connection specifications	Number of connectable sensor units	Up to 15 units (including main unit)
Power voltage		20 to 30 VDC, including ripple, Ripple (P-P): 10 % max. Class 2 (Supplied via connected sensor amplifier)
Power consumption		25 mA max.
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Case/Polycarbonate
Weight		Approx. 53 g
Communication method		Full duplex
^*1 For connecting with sensor, please refer to the user's Manual

Keyence MT-200 Keyence

31,979.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X102AP Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88836 Keyence

3,416.00 kr

Only 2 units left

Specifications

Model				OP-88836
Length				5 m 16.4'

Keyence OP-87699 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence BT-WUC74GA Keyence

0.00 kr

Sold Out

Specifications

Model		BT-WUC74GA
Dedicated AC adapter specifications	Input side	100 to 240 VAC, 50/60 Hz
	Output side	16 VDC, Max. 3.75 A
Dimensions	Dedicated AC adapter specifications	102.5 x 42.5 x 28 mm 4.04" x 1.67" x 1.1" (not including the cable)
Weight		Approx. 250 g
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F (No freezing)
	Relative humidity	20 to 85 % RH (No condensation)
	Storage temperature	-20 to +60 °C -4 to 140 °F (No freezing)
	Storage relative humidity	20 to 85 % RH (No condensation)
Accessory		AC adapter (OP-88149)^*1
Dimensions		67.4 x 105.3 x 288.1 mm 2.65" x 4.15" x 11.34"
Weight		Approx. 410 g
^*1 A separate AC cable is required.

Keyence OP-42198 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-42198
Type				Long-distance reflector
Applicable product				LV-H67
Material				Reflector: Acrylic, Base: ABS

Keyence OP-88627 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-G125 Keyence

45,142.00 kr

Only 2 units left

Specifications

Model			FD-G125
Pipe size	DN (Diameter Nominal)		100 A, 125 A
	NPS (Nominal Pipe Size)		4", 5"
	Outer diameter of pipe		ø111 to 117 mm 4.37" to 4.61", ø138 to 144 mm 5.43" to 5.67"
	Pipe thickness		3.1 to 6.8 mm 0.122" to 0.27"
Supported pipe materials			Iron, steel, stainless steel
Supported fluids			Air, Nitrogen, other gases^*1
Fluid temperature			0 to 60ºC 32 to 140 °F
Recommended pressure			0.4 MPa or greater (58 PSI or greater)
Rated velocity of flow range			Up to 15 m/s
Actual flow rate range (typical)	m³/h		Pipe size 100 A: 470.0 Pipe size 125 A: 720.0
	L/min		Pipe size 100 A: 7800 Pipe size 125 A: 12000
	CFM		Pipe size 100 A: 280.00 Pipe size 125 A: 420.00
Standard flow rate range (typical) [CFM]	20°C 68°F 60 psi 0.41 MPa		Pipe size 100 A: 1326.34 Pipe size 125 A: 1989.51
	20°C 68°F 80 psi 0.55 MPa		Pipe size 100 A: 1681.49 Pipe size 125 A: 2522.23
	20°C 68°F 100 psi 0.69 MPa		Pipe size 100 A: 2036.63 Pipe size 125 A: 3054.95
	20°C 68°F 120 psi 0.83 MPa		Pipe size 100 A: 2391.78 Pipe size 125 A: 3587.67
Display			QVGA 2.2" LCD color monitor
Display update cycle			Approx. 3 Hz
Display resolution	Instantaneous flow rate		0.1 m³/h, 1 L/min, 0.1 CFM
	Consumption/leakage amount		0.1 m³, 1 L, 1 CF
Response time			1.0 s/2.5 s/5.0 s/10.0 s/30.0 s/60.0 s/120.0 s/200.0 s (variable)
Measurement accuracy	Between 10 and 100% of F.S.		±2.0% of RD^2^3^4^5
	Between 1 and 10% of F.S.		±1.0% of F.S.^2^3^4^5
Zero point error			±0.15% of F.S.^2^6
Static leakage repeatability			±1.0% of RD^4^7
Hysteresis			Variable
Flow units			CFM(S), CFM, m³/h (N), m³/h (S), m³/h, L/min (N), L/min (S), L/min
I/O wiring connection port			M12 4-pin connector (male)
Detection mode (switchable)	ch.1		Instantaneous flow mode/area mode/pulse (+) mode/integrated flow mode/warning mode (consump)^*8
	ch.2		Instantaneous flow mode/area mode/pulse (−) mode/warning mode (leak)/error output mode/analog output/integrated flow reset/flow rate zero input/origin adjustment input^*8
Standard I/O (switchable)	Control output (ch.1/ch.2)		NPN/PNP setting switchable, open collector output 30 VDC or less, max. 100 mA/ch, residual voltage: 2.5 V or less
	Analog output (ch.2)		4 to 20 mA/0 to 20 mA, load resistance: 500 Ω or less
	External input (ch.2)		Short-circuit current: 1.5 mA or less, input time: 20 ms or more
Protection circuit			Power supply reverse connection protection, power supply surge protection, short-circuit protection for each output, surge protection for each output
Analog input (for volume conversion)			M8 4-pin connector (female), analog current input (4 to 20 mA), input resistance: 100Ω or less
Power supplied to pressure sensor			Supply voltage: Equivalent to voltage applied to the FD-G, Supply current:70 mA or less (analog output of the pressure sensor included)
Communication interface	USB		USB 2.0
	Ethernet	Standard	IEEE 802.3u (100BASE-TX)
		Transmission rate	100 Mbps
		Cable	Category 5 or higher STP (shielded twisted pair) or UTP (unshielded twisted pair) cable
		Connector	M12 connector (female, D-code)
Network function			Modbus TCP, EtherNet/IP™, IO-Link^*9
Recording capacity	Consumption amount/ leakage amount		Approx. 5 years
	Events		100
Power supply	Power voltage		20 to 30 VDC including 10% ripple (P-P), Class 2
	Power consumption		350 mA or less at 20 V, 290 mA or less at 24 V, 230 mA or less at 30 V (load current excluded) (analog output of the pressure sensor excluded), 550 mA or less at 20 V, 490 mA or less at 24 V, 430 mA or less at 30 V (Maximum load current excluded) (analog output of the pressure sensor excluded)
Environmental resistance	Enclosure rating		IP65/67 (IEC 60529)^*10
	Ambient temperature		Detection head: −10 to +60°C 14 to 140°F (no freezing), display unit: −10 to +55°C 14 to 131°F (no freezing)
	Relative humidity		5 to 85%RH (no condensation)
	Vibration resistance		10 to 500 Hz, power spectral density: 0.816 G²/Hz, XYZ axes
	Shock resistance		100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material	Display unit		Body: PBT + coating, display: PMMA, Power supply port: SUS304-equivalent, Ethernet port: zinc nickel plating
	Detection head		Body: PPS/SUS304, rear surface: rubber
	Mounting/damping bracket		SUS304
Weight			Approx. 2.7 kg
^1 The gas must be uniform and capable of transmitting ultrasonic waves. Measurement may be unstable due to the pressure inside of the pipe and the type of gas. ^2 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by factors such as the type and status of the pipe and the type and temperature of the gas. ^3 This is the value when considering linearity + span error in a stable environment with a temperature of 25°C 77°F. ^4 Defined with stable velocity of flow distribution. Does not include pulsations and fluctuations in the velocity of flow distribution primarily attributable to the equipment. ^5 The linearity error characteristic due to the pipe is not included in this value. ^6 It is possible to reduce zero point errors by performing an origin adjustment. ^7 This is the value within the range where measurement accuracy is guaranteed. ^8 When Bi-directional is specified, the following functions cannot be used. The selection of the comparison view/leak ratio view/static leakage, the measurement/display of the leakage amount/integrated flow, the setting of the target value/warning set value, and money conversions. Also, the I/O settings are limited as shown below. • ch.1: Pulse(+) mode • ch.2: Pulse(-) mode, Error output mode, Integrated flow reset, Flow zero input, Origin adjustment input ^9 IO-Link: Compatible with specification v1.1/COM1 (4.8 kbps). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^10 The IP65/67 enclosure rating is lost when a USB connection is established.