Machine Vision Systems

7,822.00 kr

Only 8 units left

Specifications

Model		CV-H500M
Type		Camera^*1
Image element		2/3-inch monochrome CCD image receiving element, 11 x high-speed reading using, square-pixel, 5,050,000 pixels Unit cell size 3.45 x 3.45 µm 0.14 x 0.14 Mil
Valid pixel count		4,990,000 pixels 2432 (H) x 2050 (V)
Pixel transfer frequency		130 MHz (65 MHz x 2 ch)
Scanning system		Progressive (61.2 ms) Interlace (40.3 ms)
Transfer system		Digital serial transfer
Electronic shutter		1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 msec to 9000 msec can be set with numeric values
Lens mount		C mount
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 130 g (not including lens)
^*1 Only the high-speed camera cable can be used.

Keyence CA-CF5L Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MD-E1 Keyence

0.00 kr

Sold Out

Specifications

Model		MD-E1
Marking stage	Drive method	Z-axis motorized stage
	Weight capacity	30 kg 66.14 lb or less
	Operational range	350 mm 13.78" (working distance: 110 to 460 mm 4.33" to 18.11")
	Stage size (width × depth × height)	500 × 400 mm 19.69" × 15.75"
	Maximum workpiece size (width × depth × height)	500 × 500 × 271 mm 19.69" × 19.69" × 10.67" ^*1
Functions		Laser marker control (start marking/stop marking/error clearing), emergency stop switch, stage raising and lowering/stage position memory read, internal lighting, external equipment control terminal (1 normal open relay), port for harness wiring, dust collection nozzle connection port ^*2, maintenance mode
Controller connection cable length		3.0 m 9.8' ^*3
Approved safety standards	Safety of Laser Products	IEC/EN60825-1 / JIS C6802 / FDA (CDRH) 21CFR Part 1040.10 and 1040.11, Laser Notice (Marking and distance measurement lasers: Class1 Guide lasers and distance pointers: Class2) ^*4
	UL and CSA Standards	UL 61010-1, CAN/CSA C22.2 No. 61010-1 ^*4
	EN Standards	EN ISO 13849-1 (Laser unit: PLe Category4 Drive unit: PLc Category1) ^5 EN ISO 11553-1 / EN ISO 11252 / EN 60204-1 / EN 62471 (Exempt Group) ^4
	JIS Standards	JIS C 1010-1 / JIS B 9960-1 / JIS C 7550 (Exempt Group) ^*4
Dimensions (width × depth × height)		860 × 802 × 811 mm 33.86" × 31.57" × 31.93"
Environmental resistance	Rated voltage/power consumption	Single phase 100 to 240 VAC ±10%, 50/60 Hz, max. 150 VA
	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Maximum relative humidity for transport/storage	85% (no condensation)
	Ambient temperature	0 to 40°C 32 to 104°F
Weight		88.1 kg 194.23 lb
^1 For MD-X2000A (working distance = 189 mm 7.44"). The distance can be extended by 90 mm 3.54" using the optional WD extension attachment (OP-89087). ^2 An optional dust collection nozzle (OP-89088) can be connected. ^3 Included with separately sold mounting options (depending on the laser marker applied). ^4 Example of approved standards when used with MD-X2000A Series and MD-C2B ^*5 Safety functions of laser unit: Interlock function when door is open, emergency stop function Safety functions of drive unit: Interlock function when door is open, emergency stop function, hold-to-run control function

Keyence OP-66842 Keyence

1,518.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-010L2 Keyence

4,215.00 kr

Only 1 unit left

Specifications

Model				SV2-010L2
General specifications	Capacity			100 W
	Input power supply	Voltage/frequency	Main circuit	3-phase (or single phase) 200 to 240 VAC +10 to -15%, 50/60 Hz 270 to 324 VDC ^*1
			Control circuit	Single-phase 200 to 240 VAC +10 to -15%, 50/60 Hz 270 to 324 VDC ^*1
		Allowable frequency fluctuation	Main circuit/control circuit	No more than ±5%
		Overvoltage category		III
	Control mode			Three-phase full-wave rectification, IGBT, PWM control, sine-wave current driving method
	Feedback			22-bit serial encoder (absolute) communication, fully closed control serial communication, analog feedback
	Operating environment	Operating atmosphere	Enclosure rating	IP20
			Pollution degree	Pollution degree: 2 (in an IP54 or higher control panel) However, usage under the following requirements required: • No corrosive gas or flammable gas present • No exposure to water, oil, or chemicals • No dust present
		Operating ambient temperature		-5 to +60°C 23 to 140°F (no freezing; reduced ratings at +55°C 131°F or more)
		Storage ambient temperature		-20 to +85°C -4 to +185°F (no freezing)
		Operating/storage ambient temperature		95% RH or less (no condensation)
		Altitude		2000 m 6561.7' or less above sea level (usable at reduced ratings at 1000 m 3280.8' or more)
		Vibration resistance		4.9 m/s² 16.1'/s² (JIS C60068-2-6 compliant)
		Impact resistance		19.6 m/s² 64.3'/s² ( JIS C60068-2-27 compliant)
		Other		No static electricity noise, strong electric fields, magnetic fields, or radiation present
	Min. insulation resistance			500 VDC, 1 MΩ or more with insulation resistance tester
	Applied standard	UL/CSA standards		UL61800-5-1, CSA22.2 No.274
		CE marking	Low-voltage directive	EN61800-5-1, EN50178
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Structure	Type		Attached to base mount
	Safety function			STO function (STO/EN61800-5-2)
	Safety function	Safety parameters		SIL3/EN61508, SIL CL 3/EN62061, PLe (Category3) / EN ISO13849-1: 2008
		Response time		8 ms (max.)
		Input		STO1, STO2: Base block signal for power module Internal impedance: 4.7 kΩ Operable voltage range: +24 V ±20% Max. delay time: 8 ms (Time from turning STO1, STO2 off until motor current cutoff)
		Output		EDM: Built-in safety circuit status monitoring (fixed output) Max. allowable voltage: 30 VDC Max. allowable current: 50 mA DC Max. voltage drop at ON: 1.5 V Max. delay time: 8 ms (Time from changing STO1, STO2 until EDM change)
		Applied standard		EN61800-5-2, EN ISO13849-1: 2008, EN61508, EN62061, EN60204-1, EN61326-3-1
	Protection function			Overcurrent, overvoltage, undervoltage, overload, regenerative abnormalities, etc.
	Insulation withstand voltage			1500 VAC or more (between primary side and ground) 3000 VAC or more (between primary side and secondary side) 350 VAC: Between secondary circuit and ground
	Weight			Approx. 0.8 kg
Power supply/current capacity and power loss	Main circuit power supply			Three-phase 200 V/Single phase 200 V
	Max. applicable motor capacity			100 W
	Power supply capacity for 1 amplifier			Three-phase 200 V: 0.3 kVA, Single phase 200 V: 0.3 kVA
	Output current	Continuous		0.91 Arms
		Max.		3.2 Arms
	Main circuit power loss			7.3 W
	Regenerative resistor power loss			—
	Control circuit power loss			17 W
	Total power loss			24.3 W
	Rated input current	Main circuit		Three-phase 200 V: 0.8 Arms, Single phase 200 V: 1.6 Arms
		Control circuit		0.2 Arms
	Rush current	Main circuit		34 A
		Control circuit
Performance specifications	Performance	Speed control range		1:5000 (load torque ≤ rated torque conditions)
		Speed fluctuation rate	At load fluctuation	±0.01% or less with load fluctuations of 0 to 100% (at rated rotation speed)
			At main circuit voltage change	0% with ±10% of rated voltage (at rated rotation speed)
			At ambient temperature change	±0.1% or less with ambient temperatures of 0 to +50°C 32 to 122°F (at rated rotation speed)
		Torque control accuracy (reproducibility)		±1%
		Speed frequency response frequency		2.6 kHz
	Dynamic brake			Operated at main circuit power supply OFF, servo alarm, limit switch detection (LSP/LSN), forced stop detection (FSTOP)
	Regenerative resistor			Built-in regenerative resistor: 50 W to 400 W ... not installed 750 W to 5.0 kW ... installed External regenerative resistor: OP-84399 (50 W to 1.0 kW) OP-87073 (1.5 kW ^*2)
	Display Function	Panel function		7-segment LED Rotary switch ×2 (16 ch) Slide switch ×1 (4 ch)
		Status display LED		CHARGE: For notification of main circuit power supply input (orange) POWER: For notification of control circuit power supply input (green) CONNECT: For notification of connection (green) LINK1, LINK2: For notification of MECHATROLINK communication (green)
	Auxiliary function			Gain control, alarm history, Z-phase search, etc.
I/O specifications	Sequence input signal	Number of inputs		7 (3 high-speed input, 4 general input)
		Max. input voltage		28.8 VDC
		Rated input voltage		24 VDC
		Min. ON voltage		19 VDC
		Min. OFF current/voltage		High-speed input: 0.6 mA, general input: 0.3 mA
		Common point mode		7 points/1 common point (1 terminal) (bidirectional)
		Input time constant		250 μs, 500 μs, 1 ms, 2.5 ms, 5 ms, 10 ms
		Input current		High-speed input: 4.5 mA, general input: 3.7 mA
		Input impedance		Approx. 4.7 kΩ
		Assignable input signals		Full signal assignment, logic-settable forced stop (FSTOP), external latch signals 1 to 3 (EXT1, EXT2, EXT3), origin return deceleration switch (DEC), forward limit switch (LSP), reverse limit switch (LSN), forward torque limit selection (PTL), reverse torque limit selection (NTL)
	Sequence output signal	Number of outputs		4
		Output mode		Transistor NPN output
		Rated load		30 VDC / 50 mA
		Leakage current when OFF		0.1 mA
		Residual voltage when ON		1.5 VDC or less
		Common point mode		Independent common
		Assignable output signals		Individual signal assignment excluding ALARM signal, logic-settable alarm (ALARM), in position (INPOS), speed matching (VCMP), zero speed detection (ZSP), operation preparation complete (RDY), torque limiting (TLM), speed limiting (VLM), electromagnetic brake timing (BRAKE), warning (WARN), Positioning proximity (NEAR)
	Analog Feedback Input signal monitor	Max. input voltage		±12 V
		Accuracy		±1% of F.S.
		Resolution		±10 bits
		Input impedance		30 kΩ
	Encoder division pulse output signal	Output mode		Phase A (A+/A−), phase B(B+/B−), phase Z (Z+/Z−): Differential line-driver output
		Line driver		SN75ALS174 (T.I.) or equivalent
		Output frequency		1.6 Mbps (with 2-phase, 4 times multiplication, 6.4 MHz or equivalent) ^*3
	Analog monitor output	No. of channels		2 ch
		Output range		±10 V (linearity valid range ±8 V)
		Resolution		16 bits
		Conversion precision		±20 mV (typ.)
		Max. allowable load current		±10 mA
		Conversion speed		1.2 ms (typ.)
Communication specifications	MECHATROLINK-III communication	Communication protocol		MECHATROLINK-III
		Station address		03H to EFH (Max. number of connectable slaves: 62)
		Transmission speed		100 Mbps
		Transmission frequency		125 μs, 250 μs, 500 μs, 750 μs, 1 to 4 ms (in multiples of 0.5 ms)
		Communication cycle		Support for values starting at transmission frequency × 1
		Number of transmitted bytes		32 bytes/station, 48 bytes/station (selectable with slide switch)
		Transmission media/cable		Category 5e-compliant, STP cross cable
		Operating specifications		Position control / speed control / torque control
		Command input		MECHATROLINK-III command (sequence, motion, monitor, adjustment, etc.)
		Max. transmission distance		50 m 164.0' ^*4
	USB communication	Connected device		PC
		Communication standard		USB 2.0-compliant
		Function		Status display, parameter setting, tuning, etc.
^1 When using a DC power supply input, set “AC/DC power supply” to “DC”. ^2 Use of 2 kW, 3 kW, and 5 kW servo amplifiers is possible depending on the operating conditions. ^3 The division ratio can be set arbitrarily with a parameter. ^*4 For instances with 30 m 98.4' or more, use ferrite cores (OP-84409) with 2 turn-winding.

Keyence FD-EPB3 Keyence

0.00 kr

Sold Out

Specifications

Model				FD-EPB3
Note				For sensor heads compatible with 3/8” to 1/2” (FD-EPH9/EPH10/EPH12/EPH13)

Keyence SV2-M500AK Keyence

0.00 kr

Sold Out

Specifications

Model				SV2-M500AK
General specifications	Applicable servo amplifier			SV2-500L2
	Rated output			4.4 kW
	Rated torque			28.4 N·m ^*1
	Instant maximum torque			71.6 N·m
	Rated current			32.8 Arms
	Instant maximum current			84 Arms
	Rated rotation speed			1500 min^-1
	High rotation speed			3000 min^-1
	Torque constant			0.934 N·m/Arms
	Rotor moment of inertia			67.5 ×10^-4kg·m²
	Rated power rating			119 kW/s
	Rated angle acceleration			4210 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (up/down, left/right) 24.5 m/s² 80.4'/s² (forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			phase F
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			5 ×
	Approx. weight			17.5kg
^*1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink.

Keyence LV-51M Keyence

5,278.00 kr

Only 6 units left

Specifications

Model		LV-51M
Type		NPN output
Main unit/expansion unit		Main unit
Control output		NPN open-collector x 2 channels, 40 VDC max., 100 mA, max. residual voltage (1.0 V max.)
Response speed		FINE : 80 µs , TURBO : 500 µs , SUPER : 4 ms
Monitor output		1 to 4 V for 1 to 4 V voltage output and FINE display 0 - 3000, load resistance 20 kΩ min.
Number of interference preventive units		FINE : No device (0) , TURBO : 2 units , SUPER : 4 units^*1
Detection mode		Light intensity distinction / edge detection
Protection circuit		Reversed polarity protection, over-current protection, surge absorber
Unit expansion		Up to 7 additional expansion units can be installed (8 units including the main unit),
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less
	Power consumption	1.5 W max. (125 mA max. for 12 V, 62.5 mA max. for 24 V)
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing) ^*2
	Relative humidity	35 to 85 % RH (No condensation)
Material	Main unit	Polycarbonate
	Case
Weight		Approx. 120 g
^1 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient temperature range varies as follows : When 2 to 5 expansion units are additionally installed : -10 to +50ºC (14 to 122ºF). When 6 or 7 expansion units are additionally installed : -10 to +45ºC (14 to 113ºF). ^2 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected. When 2 to 5 units: -10 to +50 °C 14 to 122 °F When 6 to 7 units: -10 to +45 °C 14 to 113 °F When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA.

Keyence FD-M5AY Keyence

12,814.00 kr

Only 8 units left

Buy the Keyence FD-M5AY - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FD-M5AY is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence CA-CHX10U Keyence

4,285.00 kr

In stock, 15 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AI-1000 Keyence

3,511.00 kr

Only 5 units left

Specifications

Model		AI-1000
Connection Type		6-core cable
Detection Modes		Presence check mode / Difference check mode / Feeder mode
Response Time		Switchable between 3 ms/10 ms/20 ms/50 ms/100 ms
Timer		OFF/Off-delay/On-delay/One-shot
Bank Function		Bank slots: Up to 4
Other Functions		Filter, orientation detection, anti-blur, hysteresis, mutual interference prevention, indicator LED color change, screen display orientation, statistics display, failure hold display, key lock function, I/O test
Display Panel		Organic LED (OLED) display
Languages		Japanese/English/Chinese (Simplified)
Indicators	Main Indicator	1 (green/red/orange)
	I/O Indicators	4 indicators (red): OUT1/OUT2/IN1/IN2
Input	Type	Non-voltage input/voltage input can be switched Non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) Voltage input: Maximum input rating 30 V, ON current 18 V or higher, OFF current 0.1 mA or lower, ON current 2 mA or lower (at 30 V)
	Number of Inputs	2: IN1/IN2
	Functions	Assignable functions: Bank/Hold (level)/Hold (edge)/Reset/External calibration/Interference prevention/Light off
Output	Type	Open collector output: Can be switched between NPN/PNP and N.O./N.C. Maximum rating: 30 V 50 mA, remaining voltage 2 V or lower
	Number of Inputs	2: OUT1/OUT2
	Functions	Assignable functions for OUT2: Error output/Judgment output 2/Interference prevention output (sync-output)
Communication Functions		IO-Link: Specification v. 1.1 (1.0)/COM2 (38.4 kbps)
Rating	Power voltage	20 to 30 VDC, including Ripple (P-P) 10 %
	Current consumption	0.35 A or less (power voltage at 20 V, excluding the output load)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Materials		Main unit case/Dust cover: Polycarbonate; Button: POM; Display panel: Acrylic
Weight		Approx. 110 g (including the cable of 2 m 78.74")

Keyence GS-MB11 Keyence

1,719.00 kr

Only 9 units left

Specifications

Model				GS-MB11
Type				Hinged door mounting bracket
Applicable model				for GS-M5 Series
Frame size				30 - 40 mm 1.18" - 1.57"
Weight				Approx. 120 g 4.23 oz

Keyence GL-VM111FP Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM111FP
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			111
Total length			1120 mm 44.09"
Detection height			1100 mm 43.31"
Protection height			1124 mm 44.25"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	8.5
		OFF→ON	54.4 ^*3
		All blocked→ON	66.5 ^*4
	With channel A or B	ON→OFF	27.6
		OFF→ON	91.5 ^*3
		All blocked→ON	131.2 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	135 ^*5
		Receiver	149 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	63 ^*5
		Receiver	70 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		730 g 25.76 oz
	Receiver		740 g 26.12 oz
	Total		1470 g 51.89 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence PR-G61CP Keyence

3,752.00 kr

Only 5 units left

Specifications

Model		PR-G61CP
Type		Retro-reflective
Shape		Rectangular
Output		PNP
Cable connection		M8 connector (4 pin)
Detecting distance		0.1 to 4.2 m 0.3' to 13.8' (when using R-2L)
Number of control outputs		2 (Dark-ON +Light ON)^*1
Output operation	Output 1	Dark-ON
	Output 2	Light-ON^*2
Response time		0.5 ms
Sensitivity adjustment		Five-turn trimmer
Spot diameter		―
Light source		4 elements, Red LED (630 nm)
Light interference prevention function		2
Indicator lamp		7 segment display (0 to 999), output indicator (yellow)
Control output		PNP open collector 30 VDC or less, 100 mA or less Residual voltage: 1.2 V or less at less than 10 mA, 2 V or less at 10 to 100 mA
Stop emission input		―
Protection circuit		Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %
	Power consumption	450 mW max. (15 mA max. at 24 V, 21 mA max. at 12 V)
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250)^*3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less
	Ambient temperature	-20 to +70 °C -4 to 158 °F (No freezing)^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-20 to +70 °C -4 to 158 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS 316L, Indicator cover: PES, 7-segment display cover/Lens cover: PMMA (scratch-resistant coating) M18 nut: Brass (Nickel plating), Lock washer: Steel (Chrome plating)
Accessories		Instruction manual
Weight		Approx. 25 g
^1 For the threaded mount type sensors, the outputs are 1 NPN output and 1 PNP output. ^2 Output 2 is not available on the threaded mount type or M8 3-pin type. ^3 For the connector type, the enclosure rating varies depending on the cable that is used. ^4 When the ambient temperature is 60 °C 140 °F or higher, the device should be powered with no more than 24 VDC and 50 mA.

Keyence LV-NH32 Keyence

2,679.00 kr

Only 7 units left

Specifications

Model		LV-NH32
Type		Adjustable beam spot
FDA (CDRH) Part 1040.10		Class 1 Laser Product
IEC 60825-1
Light source		Visible red semiconductor laser, Wavelength: 660 nm
Detecting distance	MEGA	1200 mm 47.24"
	ULTRA	1000 mm 39.37"
	SUPER	750 mm 29.53"
	TURBO	500 mm 19.69"
	FINE	250 mm 9.84"
	HSP	200 mm 7.87"
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Material	Case	Glass reinforced plastic
	Lens cover	Acrylic (Receivers: Polyarylate)
Weight		Approx. 65 g

Keyence LG-81 Keyence

19,939.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence WM-S1 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV-C20D Keyence

3,781.00 kr

Only 1 unit left

Specifications

Model				SV-C20D
Type				Motor power cable, Standard
Applicable product				SV-100/150, SV-M100/M150
Length				20 m 65.6'
Note				for 1 k / 1.5 kW motor

Keyence FD-81 Keyence

10,700.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-SP2P1 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-SP2P1
Type				One-line systemdedicated cable
Applicable product				GL-S Series main unit
Number included				1
Cable end				Main unit connection connector - Loose wires
Output				PNP
Number of core				6
Length				2 m 6.56'
Weight				60 g

Keyence FL-001LS0 Keyence

0.00 kr

Sold Out

Buy the Keyence FL-001LS0 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FL-001LS0 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence CC-HC1 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LV-S72 Keyence

6,424.00 kr

Only 6 units left

Specifications

Model		LV-S72
Type		Small (with slit)
FDA (CDRH) Part 1040.10		Class 1 Laser Product
IEC 60825-1
Light source		Visible red semiconductor laser, Wavelength: 655 nm
Detecting distance	MEGA	500 mm 19.69"
	ULTRA
	SUPER
	TURBO
	FINE
	HSP
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
Material	Case	Metal part: Stainless steel, Plastic part: Polyarylate
	Lens cover	Transmitter: Norbornene plastic Receiver: Glass
Weight		Approx. 70 g

Keyence DL-RS1 Keyence

5,621.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.