Machine Vision Systems

0.00 kr

Sold Out

Specifications

Model				OP-88951
Length				10 m 32.8'

Keyence OP-89122 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-89122
Type				M12 Quick-Swap Bracket
Applicable sensor size				M8
Material				Body: SUS303 Nut: SUS304 Toothed washer: SUS304
Weight				Approx. 30 g 1.06 oz

Keyence OP-86930 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87444 Keyence

1,539.00 kr

Only 8 units left

Specifications

Model				OP-87444
Type				Monitor power cable
Cable end				M8 4-pin / Strand wire
Length				5 m 16.4'

Keyence KV-N16EX Keyence

3,781.00 kr

Only 3 units left

Specifications

Model				KV-N16EX
Expansion input unit	External connection method			Terminal block
	Input terminals			24 VDC mode,5 VDC mode
	Maximum input voltage			26.4 VDC
	Input rated voltage	24 VDC mode		5.3 mA
		5 VDC mode		1 mA
	Minimum ON voltage	24 VDC mode		19 V
		5 VDC mode		3.5 V
	Maximum OFF current	24 VDC mode		1.5 mA
	Maximum OFF voltage			1.5 V
	Common method			16 points/1 common (2 terminals) ^*1
	Input time constant (four-level switching)	Input time constant setting	OFF to ON: Typ.	25 μs : 10 μs 300 μs : 240 μs 1 ms : 1 ms 10 ms : 10 ms
			OFF to ON: Max.	25 μs : 50 μs 300 μs : 290 μs 1 ms : 1.2 ms 10 ms : 11 ms
			ON to OFF: Typ.	25 μs : 50 μs 300 μs : 280 μs 1 ms : 1 ms 10 ms : 10 ms
			ON to OFF: Max.	25 μs : 150 μs 300 μs : 390 μs 1 ms : 1.2 ms 10 ms : 11 ms
	Input impedance			4.3 kΩ
Internal current consumption				20 mA or less
Weight				Approx. 220 g
^*1 The KV-N8EX and KV-N16EX have 2 COM terminals, but these are shared internally.

Keyence AT2-301 Keyence

29,910.00 kr

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV3-500CA Keyence

20,646.00 kr

In stock, 13 units

Specifications

Model		IV3-500CA
Type		Standard
Installed distance		50 mm 1.97" or more ^*1
Tools	Available modes	Standard mode / Sorting mode
	Tool with standard mode	Learning, Outline, Color area ^2, Area ^3, Edge pixels, Color average ^2, Brightness average ^3, Width, Diameter, Edge presence, Pitch, OCR, Color prohibit ^*4, Brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge), Blob count
	Number of tools	Total: 65 tools ^*5
Field of view		Installed distance 50 mm 1.97": 22 (H) × 16 (V) mm 0.87" (H) × 0.63" (V) to Installed distance 3000 mm 118.11": 1184 (H) × 888 (V) mm 46.61" (H) × 34.96" (V)
Switch settings (programs)		128 programs (when using SD card) / 32 programs (when not using SD card)
Image receiving element	Type	1/2.9 inch color CMOS
	Number of pixels	1280 (H) × 960 (V)
Image history	Number of storable images	100 images ^*6
	Save conditions	Selectable between NG only, NG and OK near threshold ^7, and All ^6
Focus adjustment		Auto ^*4
Image data transfer	Transfer destination	Selectable between SD card, FTP server and SFTP server
	Transfer format	Selectable between bmp, jpeg, iv3p, and txt, and file names can be modified
	Transfer conditions	Selectable between NG only, NG and OK near threshold ^*8, and All
Exposure time		12 μs to 10 ms
Analysis information	RUN display	Tools list (Judgment results, degree of similarity, or degree of similarity bar display) ^*8
	RUN information	Switchable between OFF, histogram, processing time, count, and output monitor Histogram: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGs Processing time: Processing time (latest, Max., Min., Ave.) Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errors Output monitor: ON/OFF status by output ^*8
Lights	Illumination	White LED
	Lighting method	Pulse lighting/ continuously lighting is switchable.
Other functions	Image capture function	Digital zoom (2×, 4×), HDR, High gain, Color filter ^2, White balance ^2, Brightness correction, AI capture
	Tool functions	Additional learning, Mask outline, Masking function, Color extraction/exclusion ^2, Color histogram function ^2, Monochrome histogram function ^*3, Scaling function
	Utilities	Failing sensor list, Failure hold, Test run, I/O monitor, Security settings (Two-factor password), Simulator ^*9, Additional FTP/SFTP Image Information, Multi-position adjustment, Multi-master image registration, High-speed program switching, Auto program switching, Auto setting backup/restore, Threshold changing in RUN
Indicators		OUT, TRIG, STATUS, LINK/ACT, SD
Input	Type	Switchable between non-voltage input and voltage input For no-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current 2 mA (for 24 V)
	Number of inputs	6 ports, 3 ports are selectable as IN/OUT
	Function	IN1: External trigger, IN2, IN3, I/O1 to I/O3: Enable by assigning optional functions Assignable functions: Program switching, Clear error, External master image registration, SD card save cancel
Output	Type	Photo MOS relay output, N.O./N.C. Switchable Maximum rating 30 V 50 mA, residual voltage 1.5 V or less ^*10
	Number of outputs	6 ports, 3 ports are selectable as IN/OUT
	Function	Enable by assigning the optional functions Assignable functions: Total judgment (OK/NG), Run, Busy, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool, Error, SD card error, Variety discrimination result, Master judgment result
Power/I/O	Connector	M12 12 pin A code Male connector
	PoE	PoE power Class 3/4/6 ^*11
Ethernet	Standard	1000BASE-T/100BASE-TX
	Connector	M12 8 pin X code Female connector
Network function		FTP client, SFTP client
Interface compatibility	Built-in Ethernet	EtherNet/IP™, PROFINET ^*12, TCP/IP non-procedure communication
Expanded memory		microSD card (microSD/microSDHC) ^*13
Ratings	Power voltage	24 VDC +25%/-20% (including ripple) ^*14
	Current consumption	3.3 A or less (without the AI Lighting unit, and including the output load) 1.8 A or less (AI Lighting unit, and including the output load) ^*15
Environmental resistance	Enclosure rating	IP67 ^*16
	Ambient temperature	0 to +50°C 32 to 122°F (No freezing) ^*17
	Relative humidity	35 to 85% RH (No condensation)
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions ^*18
	Shock resistance	500 m/s² 1640'/s², 3 times in each of the 6 directions ^*18
Material		Main unit case: Aluminum die-casting/PBT/TPU Indicator light cover: TPU Ethernet connector: Aluminum die-casting/LCP Front cover: Acrylic (hard coating) Power connector: Aluminum die-casting/LCP Nameplate: PET Water proof cap for the Power connector: PC+ABS alloy Water proof cap for the Ethernet connector: PC
Weight		Approx. 300 g 10.59 oz (without the AI Lighting unit) Approx. 495 g 17.47 oz (with the AI Lighting unit)
^1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more. ^2 Color type only. ^3 Monochrome type only. ^4 The focusing position can be automatically adjusted at the time of installation. Disabled during operation. The focusing position can be registered by programs. ^5 Tools can be installed by programs. This is the number of detection tools and position adjustment tools. Up to 64 detection tools can be set. The number of detection tools in Sorting mode are eight tools. ^6 Saves to the sensor’s internal memory. The images saved to the sensor can be backed up to a USB memory stick inserted into the control panel (IV3-CP50) or to the PC where the software for the IV3 Series (IV3-H1) is being used. ^7 Learning tool only. ^8 Can also be displayed on the control panel (IV3-CP50) or the software for the IV3 Series (IV3-H1). ^9 Usable on the software for the IV3 Series (IV3-H1). ^10 Make sure to keep a total of each output with 120 mA or less. ^11 For a PoE power supply device, IEEE802.3at power class 4 or higher is recommended when using the AI Lighting unit, and IEEE802.3bt power class 6 or higher is recommended when the AI Lighting unit is not used. When using PoE operation may be restricted due to power limitation. ^12 Conformance Class B, applicable protocol: LLDP, SNMP. ^13 Use only products recommended by KEYENCE. ^14 When using the OP-88656 (10 m 32.8'), the power voltage is 24 V DC +25%/-10% (including ripple). ^15 The peak current is designed to be smaller if the AI Lighting unit is mounted. The peak current is greater if the AI Lighting unit is not mounted. ^16 Except when the polarizing filter (OP-88640/OP-88641/OP-88644/OP-88645) is mounted. ^17 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information. ^18 Except when the dome attachment (IV3-D10) is mounted.

Keyence ER-GR12P Keyence

0.00 kr

Sold Out

Specifications

Model		ER-GR12P
Type		Environment-resistant all-metal shielded type Screw type M12 Cable PNP output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		7 mm 0.28" ±10% ^*2
Response frequency		100 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		21 × 21 mm 0.83" × 0.83"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±20% or less of detecting distance at +25°C +77°F (-40 to -25°C -40°F to -13°F, +55 to +85°C 131°F to 185°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP68G (JIS C 0920), IP69K (DIN40050)
	Ambient temperature	-40 to +85°C -40°F to +185°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G2 /Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface and case: SUS316L, Nut: SUS316L, Toothed lock washer: SUS316L [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP) [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 75 g 2.65 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +70°C +158°F or higher is 33% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence OP-87415 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87415
Applicable product				SJ-E Series
Note				Attaching this product to the SJ-E Series prevents bending. Attach this product at equal intervals.

Keyence OP-94737 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-94737
Overview				Connector cable with M12 on the both edges for connection.
Applicable product				For extension of standard cables of connector sensors FD-P and FW.
Cable end				M12 straight connector - M12 straight connector
Length				1 m 3.28'

Keyence TM-CX10U Keyence

0.00 kr

Sold Out

Specifications

Model		TM-CX10U
Max. connections	Number of steps	2
	Cable length	30 m 98.4' total (10 m 32.8' between devices)
Environmental resistance	Ambient temperature	0 to +45°C 32 to 113°F
	Relative humidity	35 to 85% (No condensation)
Weight		Approx. 60 g

Keyence OP-88145 Keyence

66,867.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VT-BW10 Keyence

0.00 kr

Sold Out

Specifications

Model				VT-BW10
Type				Weatherproof cover
Applicable product				VT5-W10

Keyence GL-VM119FN Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM119FN
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			119
Total length			1200 mm 47.24"
Detection height			1180 mm 46.46"
Protection height			1204 mm 47.40"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	8.8
		OFF→ON	52.8 ^*3
		All blocked→ON	65.3 ^*4
	With channel A or B	ON→OFF	29.0
		OFF→ON	82.5 ^*3
		All blocked→ON	124.2 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	141 ^*5
		Receiver	156 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	63 ^*5
		Receiver	70 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		780 g 27.53 oz
	Receiver		790 g 27.88 oz
	Total		1570 g 55.42 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence OP-87310 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87310
Overview				O-ring for conversion adapter female.
Applicable product				GP-M adapter (G female) OP-87283
Number included				1 pcs.
Material				FKM
Note				Attached to the GP-M adapter (G female).

Keyence OP-88386 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88386
Applicable product				KV-CA1H, KV-CA1W

Keyence CA-LMA4 Keyence

0.00 kr

Sold Out

Specifications

Model		CA-LMA4^*1
Type		Coaxial
Optical magnification (reference magnification)		x4
Magnification range		Approx. ±5 % relative to reference axis
WD (at reference magnification)		70.3 mm 2.77" ^*2
Compatible image sensor size		1/2"
Field of view (at reference magnification)	1/3"	0.9 x 1.2 mm 0.035" x 0.047"
	1/2"	1.2 x 1.6 mm 0.047" x 0.063"
	2/3"	-
F-stop range (aperture)		26.5
Depth-of-field		172 µm 6.77 Mil^*3
Max. TV distortion		-0.22 %
Resolution		4.5 µm 0.18 Mil^*4
Mount		C-mount
Ambient temperature/humidity range		0 to +50 °C 32 to 122 °F, 80 % RH (No condensation)
Weight		Approx. 66 g
^1 The above values are all calculated according to optical design values. Actual values for individual lenses will differ according to precision of assembly. ^2 Working distance indicates a working distance of each lens at reference magnification. Working distance will vary depending on magnification adjustment. (Excluding CA-LM1/LMA1) ^3 The indicated depth-of-field is a theoretical value that assumes 1/2" or 2/3" image sensor size and a horizontal resolution of 320 TV lines. (Circle of least confusion is 40 µm 1.57 Mil in the image) ^4 The smallest resolvable feature able to be detected under 550 nm wavelength light.

Keyence CA-DEB10X Keyence

0.00 kr

Sold Out

Specifications

Model		CA-DEB10X
Light source	Color	Blue
Control interface	Connector	Dedicated 12-pin circular connector
Power source		Supplies power via control interface
Environmental resistance	Enclosure rating	IP67 (IEC 60529)
	Ambient temperature	0–40°C
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		116 mm × 116 mm × 53 mm
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device case: Magnesium die-casting Front cover: Polycarbonate, acrylic ^*1
Weight		Approx. 390 g
^*1 ESD-safe and IEC 61340-5-1-compliant when used with the OP-88808 (protective attachment for high-intensity smart ring lighting).

Keyence CA-D1W Keyence

6,410.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF25Y Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence NU-EP1 Keyence

3,173.00 kr

Only 5 units left

Specifications

Model		NU-EP1
Name		Communication unit that supports EtherNet/IP™
Ethernet Specifications	Compliant standards	IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3af (Power over Ethernet, Class 3)
	Transmission rate	10 Mbps (10BASE-T), 100 Mbps (100BASE-TX)
	Transmission media	STP or category 3 or higher UTP (10BASE-T),^*1 STP or category 5 or higher UTP (100BASE-TX)
	Maximum cable length	100 m 328.1' (the length between this unit and the Ethernet switch)
	Max. number of connection stages	4 (10BASE-T) 2 (100BASE-TX)^*2
EtherNet/IP™	Compliant functions	Cyclic communication (implicit messages), message communication (explicit messages)
	Number of connections	64
	RPI (Transmission cycle)	0.5 to 10,000 ms (in units of 0.5 ms)
	Tolerable communication bandwidth for cyclic communication	6,000 pps
	Message communication	Supports UCMM, Class 3
	Conformance test	Supports version A7
Sensor connection	Connectable sensors	Sensor amplifier that supports N-bus^*3
	Number of connectable units	16 maximum^*4
	Power supply	Power is supplied by this unit through the sensor amplifier connection connector.
	Allowable passing current	Total: 1,200 mA or less^*5
	Power during PoE power receiving	Supply voltage: 24 V ±10 %, supply current: 360 mA or less^6 (UL Class 2)^7
Indicator lamp		Link/activity indicator (LINK/ACT): green LED, module status indicator (MS): 2-color (green and red) LED, network status indicator (NS): 2-color (green and red) LED, sensor communication indicator (N-bus): 2-color (green and red) LED
Power voltage		24 VDC ±10 %, ripple (P-P): 10 % or less (when using the power supply connector); 48 VDC (57 V maximum; during PoE power receiving)
Power consumption		1,500 mW or less (60 mA or less at 24 V)^*8
Environmental resistance	Pollution degree	2
	Ambient temperature	-20 to +55 °C -4 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main unit case and dust cover: polycarbonate, power supply connector: polyamide (plug), PBT (socket)
Accessories		Instruction manual, power supply connection connector, end unit x 2
Weight		Approx. 80 g (including connectors)
^1 When using the PoE power receiving function to form a connection, use an STP cable or category 5 or higher UTP cable. ^2 When using the switch, there is no limit on the number of units that can be connected. ^3 "N-bus" is the name of KEYENCE's wiring-saving system for sensor amplifiers. ^4 This varies depending on the connected sensor amplifiers. ^5 This is the current that can be supplied to the main unit or to the sensor amplifier connected to the main unit. ^6 This varies depending on the ambient usage temperature. (-20 to 45 °C -4 to 113°F: 360 mA or less, 45 to 50 °C 113 to 122°F: 260 mA or less, 50 to 55 °C 122 to 131°F: 140 mA or less) ^7 Power which can be supplied to the sensor amplifi er when using the PoE power receiving function ^8 The current supplied to the connected sensor amplifiers is not included.

Keyence OP-89130 Keyence

0.00 kr

Sold Out

Specifications

Model		OP-89130
Type		High-flex ^1 ^2
Sensor side	Connector size	M8 3-pin
	Appearance	Straight
Cable connector	Connector size	M12 4-pin
	Appearance	Straight
Length		10 m 32.8'
Material		Cable: PVC, Connector: Nickel-plated brass
Weight		Approx. 270 g 9.53 oz
^1 Use a heat/cleaning-resistant cable for the weld-resistant all-metal type in environments of 80°C 176°F or higher and for the environment-resistant all-metal type in environments of -25°C -13°F or lower or at 80°C 176°F or higher. ^2 When used with the general-purpose all-metal type or the environment-resistant all-metal type, the enclosure rating is IP67.

Keyence LV-L02 Keyence

0.00 kr

Sold Out

Specifications

Model		LV-L02
Type		Lens attachment for the LV-NH47/LV-H47
Area width	Standard mode	Detecting distance at 55 mm 2.17": 17 mm 0.67" Detecting distance at 70 mm 2.76": 20.5 mm 0.81" Detecting distance at 85 mm 3.35": 24 mm 0.84"
	When slit 1 is equipped	Detecting distance at 55 mm 2.17": 13.0 mm 0.51" Detecting distance at 70 mm 2.76": 15.5 mm 0.61" Detecting distance at 85 mm 3.35": 18.0 mm 0.71"
	When slit 2 is equipped	Detecting distance at 55 mm 2.17": 11.0 mm 0.43" Detecting distance at 70 mm 2.76": 13.0 mm 0.51" Detecting distance at 85 mm 3.35": 15.0 mm 0.59"
	When slit 3 is equipped	Detecting distance at 55 mm 2.17": 8.5 mm 0.33" Detecting distance at 70 mm 2.76": 10.0 mm 0.39" Detecting distance at 85 mm 3.35": 11.5 mm 0.45"
	When slit 4 is equipped	Detecting distance at 55 mm 2.17": 6.0 mm 0.24" Detecting distance at 70 mm 2.76": 7.5 mm 0.30" Detecting distance at 85 mm 3.35": 9.0 mm 0.35"
Area thickness		Detecting distance at 55 mm 2.17": 3.0 mm 0.12" Detecting distance at 70 mm 2.76": 3.4 mm 0.13" Detecting distance at 85 mm 3.35": 3.8 mm 0.15"
Material	Case	Polyacetal (main body), Arton (lens)
Weight		Approx. 1 g

Keyence OP-87445 Keyence

2,297.00 kr

Only 5 units left

Specifications

Model				OP-87445
Type				Panel power cable
Cable end				M8 4-pin - strand wire
Length				10 m 32.8'