Machine Vision Systems

3,676.00 kr

Only 5 units left

Specifications

Model		PR-FB15C3PL^*1
Type		Reflective (Background suppression)
Output		PNP
Shape		Flat
Cable connection		M8 connector (3 pin)
Detection distance		1 to 15 mm 0.04" to 0.59"
Number of control outputs		1 output
Output operation	Output 1	-
	Output 2	Light-ON
Response time	Output 1	-
	Output 2	ON→OFF: 2.7 ms, OFF→ON: 0.5 ms
Sensitivity adjustment		None
Spot diameter		Approx. 2.5 x 4.5 mm (at 15 mm)
Light source		4 element, point light source, red LED (650 nm)
Mutual interference prevention function		4 sensors
Indicator lamp		Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)
Control output		30 VDC or lower, 50 mA or lower Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.
Protection circuit		Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection
Rating	Power voltage	10 to 30 VDC, including 10 % ripple (P-P)
	Current consumption	19 mA
Environmental resistance	Enclosure rating	IP67 (IEC60529), 4X, 6P, 13 (NEMA250)
	Insulation resistance	20 MΩ or higher (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower
	Ambient temperature	-25 to +55 °C -13 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin
Accessories		Instruction Manual
Weight		Approx. 10 g
^*1 The M8 connector (3 pin) type has 1 control output. If "D" is at the end of the part number, the sensor is equipped with a Dark-ON output. If "L" is at the end of the part number, the sensor is equipped with a Light-ON output. Example: The PR-M51C3PL has a Light-ON output.

Keyence KV-16TW Keyence

6,151.00 kr

Only 4 units left

Buy the Keyence KV-16TW - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence KV-16TW is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence SV-E3A Keyence

0.00 kr

Sold Out

Specifications

Model				SV-E3A
Type				Encoder cable, Standard
Length				3 m 9.8'
Note				for 1 k to 5 kW motor

Keyence FR-LP20L Keyence

0.00 kr

Sold Out

Specifications

Model		FR-LP20L
Type		Long range Chemical model
Measuring range		Up to 15 m 49.2'^*1
Display range		Up to 25 m 82.0'^*1
Measurable dielectric constant of medium		2 or higher^*2
Resolution		1 mm 0.04"
Precision		Up to 0.1 m 0.3': ±10 mm 0.39"; 0.1 to 10 m 0.3' to 32.8' : ±1 mm 0.04"; 10 to 15 m 32.8' to 49.2': ±2 mm 0.08" ^*3
Response time		0.4 s, 1.5 s, 4 s (default value), 10 s
Tank pressure		-0.1 to +0.1 Mpa
Material	Tank interior	Lens: PTFE Internal packing: FKM Joint: PPS
	Housing	PPS PPSU
Connection diameter		G1-1/2 (40 A)
Output	No. of control outputs	Maximum 5
	Control output/auxiliary output	NPN/PNP open collector (switching type) 30 VDC or less, max 50 mA for each Residual voltage of 1.4 V or less (50 mA or less) N.O./N.C. Switching type IO2 is switchable to IO-Link
	Analog output	0–20 mA/4–20 mA maximum load resistance 260 Ω (Response time: 0.2 s after judgment output is confirmed [90% response])
External input		─
Network compatibility		IO-Link v1.1/COM2
Analog output accuracy	Resolution	1 mm 0.04"^*4
	Zero accuracy	±0.1 mA (zero point = 4 mA)^*4
	F.S. accuracy	±0.2 mA (full-scale = 20 mA)^*4
Power supply	Power voltage	24 VDC + 25%/–20% Including ripple Class 2 or LPS
	Power consumption	98 mA or less (Excluding Load Current)
Environmental resistance	Ambient temperature	Display part when combined and separated: –10 to +50°C 14°F to 122°F (no freezing)^5^6 Head when separated: –10 to +60°C 14°F to 140°F (no freezing)^5^6
	Relative humidity	Up to 85% RH (no condensation)
	Temperature of coupling used	–10 to +85°C 14°F to 185°F (no freezing)^5^6
	Vibration resistance	10–500 Hz Power spectral density: 0.816 G²; X, Y and Z directions
	Shock resistance	100 m/s² (10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Enclosure rating		IP67 (IEC60529), Enclosure Type 4X (NEMA250)
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent protection, and output surges
Weight		Approx. 400 g 14.11 oz
^1 Guaranteed value in water with the recommended installation. Static water can be measured up to the edge of the lens. An undetectable area on the short-range side is created due to the environment and measurement medium. The maximum measuring distance is also shortened. ^2 Measurement may not be possible depending on the shape and environment of the target. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement errors may occur depending on the customer’s environment. ^4 This is the guaranteed value from verification performed at KEYENCE inspection facilities with a load resistance of 250 Ω. Measurement errors may occur depending on the customer’s environment. ^5 The FR-S01 and FR-LM20L/LP20L can be used up to an ambient temperature setpoint of 10°C 50°F by selecting “Off when not in Operation” under “Screen Brightness.” ^6 When performing SIP with the FR-LS20L, do so for 1 hour or less with an ambient temperature of 40°C 104°F or less and an internal system temperature of 130°C 266°F. When performing SIP with the FR-S01/LM20L/LP20L, turn the power supply off, and then perform this operation for 1 hour or less with an ambient temperature of 40°C 104°F or less and an internal system temperature of 130°C 266°F. In addition, always install the KEYENCE optional ferrule mounting bracket and internal gasket.

Keyence CV-200M Keyence

7,619.00 kr

In stock, 15 units

Specifications

Model		CV-200M
Type		Camera^*1
Image element		1/1.8-inch monochrome CCD image receiving element, square-pixel/all-pixel reading, 2,010,000 pixels Unit cell size: 4.4 x 4.4 µm 0.17 x 0.17 Mil
Valid pixel count		1,920,000 pixels 1600 (H) x 1200 (V) ^*2
Pixel transfer frequency		40 MHz
Scanning system		Progressive (58.5 ms: 2,000,000-pixel mode, 47.6 ms: 1,000,000-pixel mode) Interlace (32.7 ms: 2,000,000-pixel mode, 27 ms: 1,000,000-pixel mode)
Transfer system		Digital serial transfer
Electronic shutter		1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 msec to 9000 msec can be set with numeric values.
Lens mount		C mount
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 110 g (not including lens)
^1 The CA-CN17 camera cable (17 m 55.8') and the CA-CN17R high-flex camera cable (17 m 55.8') cannot be used. ^2 In 1,000,000-pixel mode, 980,000 pixels (1024 x 960) serve as the processing area.

Keyence FU-35A Keyence

7,358.00 kr

Only 1 unit left

Specifications

Model		FU-35A
Detecting method		Diffuse Reflective
Size		M3
Detection arrangement		Coaxial
Fibre unit length		0.5 m
Shape		Straight
Minimum bend radius		R25 mm0.984"
Detection distance		20 mm0.787"^*1
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 5 g
^*1 The detecting distance is a value for white mat paper (the standard detection object) detections.

Keyence OP-82125 Keyence

6,962.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-83181 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-83181
Type				Deadspace-free Bracket
Applicable product				SL-C, SL-V
Number included				2 pcs.
Material				SUS304
Note				Holding sensor main body from the side. 2 setups are required for receiver and transmitter.

Keyence KV-C64XB Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV-M30 Keyence

4,074.00 kr

In stock, 16 units

Specifications

Model		IV-M30
Supported languages		Japanese/English
Display		3.5" TFT color LCD 320 x 240 dot (QVGA)
Backlight	Method	White LED
	Duration	Approx. 50,000 hours (25 °C 77 °F)
Touch panel	Method	Analog resistive
	Actuating force	0.8 N or less
Indicators		PWR, SENSOR
Ethernet	Standard	100BASE-TX/10BASE-T^*1
	Connector	M12 4pin connector^*1
Expanded memory		USB memory^*2
Rating	Power voltage	24 VDC ±10 % (including ripple)
	Current consumption	0.2 A or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 80 % RH (No condensation)^*3
	Drop Resistance	1.3 m 4.27' over the concrete (2 times each in the arbitrary direction)
	Vibration resistance	10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
Material		Polycarbonate
Weight		Approx. 180 g
^1 This is dedicated for connection with IV-series sensor. ^2 Use the KEYENCE recommended product. ^*3 If the ambient temperature is over 40 °C 104°F, use it in the absolute humidity of 40 °C 104°F 80 % RH or lower.

Keyence OP-89085 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-A600 Keyence

3,514.00 kr

Only 5 units left

Buy the Keyence FD-A600 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FD-A600 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence PR-MB15CN Keyence

0.00 kr

Sold Out

Specifications

Model		PR-MB15CN
Type		Reflective (Background suppression)
Output		NPN
Shape		Mini-slim
Cable connection		M8 connector (4 pin)
Detection distance		1 to 15 mm 0.04" to 0.59"
Number of control outputs		2
Output operation	Output 1	Light-ON
	Output 2	Dark-ON
Response time	Output 1	0.5 ms
	Output 2	ON→OFF: 2.7 ms, OFF→ON: 0.5 ms
Sensitivity adjustment		None
Spot diameter		Approx. ø3 mm (at 15 mm)
Light source		4 element, point light source, red LED (650 nm)
Mutual interference prevention function		4 sensors
Indicator lamp		Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)
Control output		30 VDC or lower, 50 mA or lower Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.
Protection circuit		Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %
	Current consumption	19 mA
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250)
	Insulation resistance	20 MΩ or higher (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower
	Ambient temperature	-25 to +55 °C -13 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin
Accessories		Instruction Manual
Weight		Approx. 13 g

Keyence CA-H048CX Keyence

15,695.00 kr

Only 6 units left

Specifications

Model		CA-H048CX
Image element		Color CMOS, 16× high-speed reading using square-pixel
Unit cell size		4.8 µm × 4.8 µm 0.19 Mil × 0.19 Mil
Valid pixel count		0.47 megapixel mode: 784 (H) × 596 (V), 0.31 megapixel mode: 640 (H) × 480 (V), 0.24 megapixel mode: 512 (H) × 480 (V)
Image size		Equivalent to 1/3"
Scanning system		Progressive 0.47 megapixel mode: 2.9 ms, 0.31 megapixel mode: 2.0 ms, 0.24 megapixel mode: 1.7 ms
Pixel transfer frequency		195 MHz
Transfer system		Digital serial transfer
Electronic shutter		Can be set to 0.022 to 1000 msec by specifying the following numerical inputs: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000
Lens mount		C-mount
Environmental resistance	Ambient temperature	0 to 40°C 32 to 104°F
	Relative humidity	85% RH or less
Weight		Approx. 190 g (not including lens)

Keyence GV-21P Keyence

3,342.00 kr

Only 7 units left

Specifications

Model		GV-21P
Type		Amplifier Unit, Main Unit
Power consumption	Normal	2200 mW max. (at 30 V: 73.3 mA max.)
	Eco-Half	1700 mW max. (at 30 V: 56.7 mA max.)
	Eco-All	1600 mW max. (at 30 V: 53.3 mA max.)
Display indicator		Dual 7-segment display (Current Value: 3-digit red LED indicator, Preset Value: 3-digit green LED indicator) + 2-color 13-level Bar LED (Red, Green)
Output		PNP
Control output		PNP open collector x 2ch, 30 V DC max./Max. 100 mA, residual voltage 1 V max.
Control input		Emission stop input, Bank switching input, Shift input, Timing input, Each input response time: 20 ms
Response time		1.5/3/10/20/50 ms
Operation status indicators		Control output: Red LED x 2 Channel display: Green LED x 2 Laser radiation emission indicator Green LED Other: Green LED x 2/Red LED x 3
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %^*1
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Housing material, display cover: Polycarbonate, Key Top: Polyacetal, Cable: PVC
Weight		Approx. 110 g
^*1 If expansion units are added, supply voltage must be 11 to 30 VDC.

Keyence ED-118M Keyence

4,939.00 kr

Only 7 units left

Specifications

Model		ED-118M
Type		Shielded
Shape		M18Threaded type
Detecting distance		5 mm 0.20" ±15%
Detectable object		All metals ^*1
Standard target (aluminum, t=1 mm 0.04")		18 x 18 mm 0.71" x 0.71"
Hysteresis		15% max. of detecting distance
Response frequency		100 Hz
Operation mode		N.O.
Indicator lamp		Operation indicator: Red LED, Stable operation indicator: Green LED
Temperature characteristics		±20% max. of detecting distance at 23°C 73.4°F, within 0 to 50°C 32 to 122°F
Control output		NPN open collector 100 mA max. (40 V max.), Residual voltage: 1 V max.
Protection circuit		Reversed polarity, surge absorber
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	35 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 3 times in each of the X, Y, and Z directions
Case material		Nickel-plated brass
Accessories		Screw nut x 2, toothed washer x 1
Weight		Approx. 150 g (including 2-m 6.6' cable and nuts)
^*1 When detecting ferrous metals, the detecting distance may decrease.

Keyence GL-VB03 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-VB03
Number included				Mounting bracket: 2 Hexagon socket head cap screw: 6
Material				Mounting bracket: SUS304 Hexagon socket head cap screw: SUSXM7
Weight				50 g 1.76 oz ^*1
^*1 GL-V Mounting includes two mounting brackets. The weight stated is for both items.

Keyence CL-V050 Keyence

0.00 kr

Sold Out

Specifications

Model				CL-V050 ^*1
Type				Sensor head (50 mm vacuum and heatresistant model)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence BT-W100 Keyence

3,656.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-86H Keyence

3,099.00 kr

Only 1 unit left

Specifications

Model		FU-86H^*1
Optical axis diameter (Standard target to be detected)		ø1.5 mm0.059"
Heat resistant temperature		150°C 302°F^2^3
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2
Minimum bend radius		R20 mm0.787"
Minimum detectable object		Object with a diameter of 0.005 mm0.0002"^*4
Environmental resistance	Ambient temperature	-40 to +150 °C -40 to 302 °F
Weight		Approx. 35 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 When this product is used in an environment with a consistently high temperature, we recommend a usage temperature of 130°C 266°F or less. ^3 Use in a dry state. Also, when using the heat resistant type, make a selection with ample room for the ambient temperature. ^4 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence CL-L030N Keyence

10,133.00 kr

Only 2 units left

Specifications

Model			CL-L030N
Type			Optical unit
Head			CL-L030 ^*1
Reference distance			30 mm 1.18"
Reference measurement range	Measurement range		±3.7 mm ±0.15"
	Linearity		±0.94 μm ±0.000037" ^*2
High precision measurement range	Measurement range		±1.0 mm ±0.04"
	Linearity		±0.72 μm ±0.000028" ^*2
Resolution			0.25 μm 0.000010" ^*3
Spot diameter			ø500 μm ø0.0197"
Laser class	Optical unit		Class I
Sampling cycle			100/200/500/1000 μs (Adjustable 4-stage)
Environmental resistance	Enclosure rating	Head	IP67 (IEC60529)
	Ambient light		Target surface illuminance: 30000 lux (Incandescent lamp)
	Ambient temperature		0 to 50°C 32 to 122°F
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance	Head	10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
		Optical unit	10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
	Shock resistance		15 G, 6 ms
Temperature characteristic	Head		0.005% of F.S./°C
	Optical unit		0.015% of F.S./°C
Material	Head		Front: SUS, Rear: Aluminum
	Optical unit		Polycarbonate
Weight	Head		Approx. 200 g 7.06 oz
	Optical unit		Approx. 1600 g 3.53 lb
^1 Sensor head and optical unit are a matched pair. Not cross compatible. ^2 Value measured in displacement mode with KEYENCE reference workpiece (mirrored surface). ^*3 Value measured using 16,384 average cycles with KEYENCE reference workpiece (mirrored surface).

Keyence OP-42218 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-42218
Type				Replacement filters for the electrode cleaning kit
Number included				10

Keyence OP-92737 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-92737
Type				Adapter
Overview				When using FS2-60/62/65, this adapter and fixing ring are necessary to mount fiber unit.
Applicable product				Fiber unit with cable outer diameter ø1.0 (Free-cut)
Note				Attached to the amplifier. Please purchase when additionally necessary.

Keyence FU-38 Keyence

1,646.00 kr

Only 10 units left

Specifications

Model		FU-38^*1
Beam emitting direction		Flat
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.0×2
Minimum bend radius		R10 mm0.394"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 5 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.