Machine Vision Systems

0.00 kr

Sold Out

Specifications

Model				S-P12
Type				Tough mounting bracket
Applicable product				PZ2 Series
Number included				1 unit

Keyence GL-VP2 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-VP2
Type				Main unit connection cable
Number included				1 pc.
Cable end				Female side: M12 connector 5 pin Male side: Strand wire, 5-core
Number of cores				5
Length				2 m 6.6'
Material				connector: PVC/Nickel-plated brass cable: PVC
Weight				130 g

Keyence DL-EC1A Keyence

3,573.00 kr

Only 9 units left

Specifications

Model		DL-EC1A
Ethernet specifications	Compliant standards	IEEE802.3u (100BASE-TX)
	Transmission speed	100 Mbps (100BASE-TX)
	Transmission interface	Category 5e or higher STP cable
	Distance between nodes	100 m 3937.01'
	Communication port	RJ-45 x 2
EtherCAT communication specifications	Compatible functions	Process data object communication (cyclic communication) Mailbox communication (message communication) CoE compatible Explicit Device Identification
	Conformance test version	Complies with V2.0.42
Sensor connection specifications	Connectable sensors	Sensor amplifiers with D-bus support^*1
	Number of connectable sensor units	15 units max.^*2
Indicator lamps		Power indicator (PWR): Green LED RUN indicator (RUN): Green LED ERR indicator (ERR): Red LED Sensor communication indicator (D-bus): 2-color (green/red) LED Link/activity indicator: Green LED
Power voltage		20 to 30 VDC, including ripple (p-p) of 10 % supplied from the connected sensor amplifiers
Power consumption		2,100 mW or less (at 30 V, 70 mA max.)
Environmental resistance	Pollution degree	2
	Ambient temperature	-20 to +55 °C -4 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main unit: Polycarbonate
Weight		Approx. 70 g (including connectors)
^1 D-bus is the name of KEYENCE's wiring-saving system for sensor amplifiers. ^2 This varies depending on the connected sensor amplifiers.

Keyence GL-VM06LN Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM06LN
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			6
Total length			240 mm 9.45"
Detection height			200 mm 7.87"
Protection height			285 mm 11.22"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.1
		OFF→ON	45.7 ^*3
		All blocked→ON	51.2 ^*4
	With channel A or B	ON→OFF	10.0
		OFF→ON	54.9 ^*3
		All blocked→ON	68.2 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	60 ^*5
		Receiver	73 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	48 ^*5
		Receiver	56 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		170 g 6.00 oz
	Receiver
	Total		340 g 12.00 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence CA-DQR15 Keyence

0.00 kr

Sold Out

Specifications

Model				CA-DQR15
Type				Square Lights (Direct)
LED color				red
Diffusion plate				OP-87042^*1
Power consumption				14.4 W^*2
Weight				Approx 520 g
^1 The models listed on the left are for a single bar. Four sets are required for the whole square. ^2 Total value of four bars

Keyence GL-R08L Keyence

7,737.00 kr

Only 6 units left

Specifications

Model			GL-R08L
Detection capability			ø1.77" ø45 mm
Total length			12.60" 320mm
No. of beam			8
Detection height			11.02" 280mm
Protection height			14.37" 365mm
Beam axis spacing/Lens diameter			40 mm / ø5 1.57" / ø0.20"
Detecting distance			0.66 to 49.21' 0.2 to 15 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	6.6
		OFF→ON	48.7^*2
		All blocked→ON	63.1^*3
	Optical synchronization system (Channel A or B)	ON→OFF	6.9
		OFF→ON	49.1^*2
		All blocked→ON	64.2^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	41
		Receiver	68
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		430 g
	Receiver		440 g
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence FU-1346 Keyence

0.00 kr

Sold Out

Buy the Keyence FU-1346 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FU-1346 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence GL-VM191FP Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM191FP
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			191
Total length			1920 mm 75.59"
Detection height			1900 mm 74.80"
Protection height			1924 mm 75.75"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	11.9
		OFF→ON	61.3 ^*3
		All blocked→ON	78.4 ^*4
	With channel A or B	ON→OFF	41.1
		OFF→ON	118.8 ^*3
		All blocked→ON	178.6 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	187 ^*5
		Receiver	213 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	66 ^*5
		Receiver	80 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1250 g 44.12 oz
	Receiver		1260 g 44.47 oz
	Total		2510 g 88.60 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence CL-P030G Keyence

0.00 kr

Sold Out

Specifications

Model			CL-P030G
Type			Optical unit
Head			CL-P030 ^*1
Reference distance			30 mm 1.18"
Reference measurement range	Measurement range		±3.7 mm ±0.15"
	Linearity		±0.81 μm ±0.000032" ^*2
High precision measurement range	Measurement range		±1.0 mm ±0.04"
	Linearity		±0.59 μm ±0.000023" ^*2
Resolution			0.015 μm 0.000001" ^*3
Spot diameter			ø38 μm ø0.0015"
Laser class	Optical unit		Class I
Sampling cycle			100/200/500/1000 μs (Adjustable 4-stage)
Environmental resistance	Enclosure rating	Head	IP67 (IEC60529)
	Ambient light		Target surface illuminance: 30000 lux (Incandescent lamp)
	Ambient temperature		0 to 50°C 32 to 122°F
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance	Head	10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
		Optical unit	10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
	Shock resistance		15 G, 6 ms
Temperature characteristic	Head		0.005% of F.S./°C
	Optical unit		0.015% of F.S./°C
Material	Head		Front: SUS, Rear: Aluminum
	Optical unit		Polycarbonate
Weight	Head		Approx. 200 g 7.06 oz
	Optical unit		Approx. 1600 g 3.53 lb
^1 Sensor head and optical unit are a matched pair. Not cross compatible. ^2 Value measured in displacement mode with KEYENCE reference workpiece (mirrored surface) . ^*3 Value measured using 16,384 average cycles with KEYENCE reference workpiece (mirrored surface).

Keyence R-7 Keyence

0.00 kr

Sold Out

Specifications

Model				R-7
Type				Reflector
Applicable product				LV Series

Keyence OP-87569 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87569
Cable end				M12 L-shaped type - Loose wires
Length				5 m 16.40'
Material				Covering: PVC, Nut: Nickel plating over zinc die-cast

Keyence GS-71PCSO(3197) Keyence

0.00 kr

Sold Out

Specifications

Model			GS-71PCSO(3197)
Lock type			Power-to-lock type
Type			Standard type
Response time	Lock	Lock→Unlock	320 ms^1^2
		Unlock→Lock	220 ms^1^2^*3
Lock	Locking force (Fzh)		Min. 2,000 N
	Alignment tolerance of lock		±2 mm ±0.08"
	Mechanical life-span		1 million cycles or more (with door operation speed of 1 m/s)
	Acceptable operation frequency		1 Hz^*4
	Door radius		Min. 250 mm 9.84"
	Auxiliary release		Front, back ^*5
Cascading			Max. 25 units
Control output (OSSD output)	Output		Transistor outputs × 2
	Max. load current		Max. 150 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
	OFF state voltage		Max 2.0 V (with a cable length of 5 m 16.40')
	Leakage current		Max. 0.5 mA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
AUX (Non-safety related output)	Output		Transistor output
	Number of outputs		1
	Max. load current		50 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
External input (Short-circuit current)	Safety input		Approx.1.5 mA × 2
	Reset/EDM input		-
	Lock control input		Approx. 2.5 mA × 1
	OSSD operation switching input		-
Applicable Standards (Safety)			EN 61508, IEC 61508(SIL2/SIL3) EN 62061, IEC62061(SIL CL2/SIL CL3) EN ISO13849-1: 2015(PLd, Category 2/PLe, Category 4) EN ISO14119(Type4) IEC 60947-5-3, EN 60947-5-3 UL 61010-1, CAN/CSA-C22.2 No.61010-1
Protection circuit			Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage		24 V DC ±20 % (Ripple P-P 10 % or less, Class2)
	Power consumption		3.4 W^*6
Environmental resistance	Enclosure rating		IP65/67(IEC60529), IP69K(ISO 20653) (TÜV SÜD certified), Enclosure Type 3/4X/12/13 (NEMA250)
	Operating ambient temperature		-20°C to +55C° -4°F to 131°F (No freezing)
	Operating relative humidity		5% to 95%RH
	Storage temperature		-25°C to +70°C -13°F to 158°F (No freezing)^*7
	Storage relative humidity		5% to 95%RH
	Vibration resistance		10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance		30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Sensor main unit	Case	SUS304, PPS, PBT, PAR, PA66, NBR
		Lock	Aluminum alloy, Zinc die cast (Nickel chrome plating)
		Cable	PVC
	Actuator	Case	PPS, PBT, NBR
		Lock	Aluminum alloy, SUS303
Weight			Approx. 380 g
^1 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of units cascaded -1). ^2 If the OSSD operation is open/close link mode, Detect→ Not detect: 20 ms + 2 ms × (number of units cascaded -1), Not detect → Detect: 30 ms + 25 ms × (number of units cascaded -1) ^3 430 ms when locked at the same time the actuator is detected. ^4 Acceptable door operation frequency is 3 Hz if the OSSD operation is open/close link mode. In that case, operation distance is Sao(OFF→ ON) = 3 mm 0.12", Sar(OFF→ ON) = 10.5 mm 0.41". ^5 Do not apply excessive torque (0.45N·m or higher). ^6 Power consumption temporarily increases (Max. 10.5 W, Approx. 0.2 s) when the lock control input(s) is(are) turned ON. After that, current consumption will be within the specification. ^*7 When stored for a long period of time, please store it at a temperature of 55°C 131°F or lower.

Keyence EV-130F Keyence

4,259.00 kr

Only 4 units left

Specifications

Model		EV-130F
Type		Spatter-resistant/Shielded
Shape		M30
Detecting distance		10 mm 0.39" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		30 x 30 mm 1.18" x 1.18"
Hysteresis		15% max. of detecting distance
Response frequency		250 Hz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -25 to +70°C -13 to +158°F
Control output (switching capacity)		5 to 200 mA
Protection circuit		Reversed polarity, short-circuit, surge voltage
Cable length		2 m 6.6'
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 20 % or less
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 3 times in each of the X, Y, and Z directions
Case material		Fluoro-chemical-coated brass
Accessories		Screw nut x 2, toothed washer x 1
Weight		Approx. 300 g

Keyence AP-15S Keyence

5,258.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-92302 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-92302
Type				Super-tough contact
Applicable product				AT Series

Keyence OP-87551 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87551
Overview				Anti-condensation mounting brackets (G3/4) for the FL-001.
Applicable product				FL-001
Material				SUS303
Note				2 gaskets for the FL-001 (OP-87548) are included.

Keyence BL-1301HA Keyence

4,501.00 kr

In stock, 13 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88575 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LM-1100 Keyence

0.00 kr

Sold Out

Specifications

Model				LM-1100
Type				Head
Image sensor				1", 20-mega pixel monochrome CMOS
Display				10.4" LCD monitor (XGA: 1024 × 768)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		225 mm × 125 mm 8.86" × 4.92"
		High-precision measurement mode		206 mm × 106 mm 8.11" × 4.17"
	Minimum display unit			0.1 µm
	Repeatability	Inside camera's field of view (2σ)	Wide-field measurement mode	±0.5 µm
			High-precision measurement mode	±0.1 µm
		With stage movement	X/Y axis	±0.9 µm
			X/Y plane
	Measurement accuracy	Inside camera's field of view (2σ)	Wide-field measurement mode	±2 µm^*1
			High-precision measurement mode	±0.7 µm^*2
		With stage movement	X/Y axis (EUX,MPE , EUY,MPE)	±(1.8 + 0.02 L) µm^*3
			X/Y plane (EUXY,MPE)	±(2.8 + 0.02 L) µm^*3
AF height measurement	Repeatability			±2 µm
	Measurement accuracy (EUZ,MPE)			±(4.8 + 0.04 L) µm^*4
External remote input				Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.			PhotoMOS output Rated load 24 V DC, 0.5 A ON resistance 50 mΩ or lower
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			2 ports (rear: 2)
	USB 2.0 Series A			4 ports (front: 2, rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transparent illumination
	Ring			Four division, multi-angle illumination (electric) Slit ring (directivity) illumination (electric) Telecentric coaxial illumination
External illumination control	Intensity control			PWM control, 100 kHz
	Output voltage			12 V DC
	Output current			1.6 A (max.)
XY stage	Moving range			200 mm × 100 mm 7.87" × 3.94" (electric)
	Withstand load			7 kg
Z stage	Moving range			75 mm 2.95" (electric)
Power supply	Power voltage			100 to 240 V AC ±10% (50/60 Hz)
	Power consumption			430 VA or lower
Environmental resistance	Ambient temperature			+10 to 35°C +50 to 95°F^*5
	Relative humidity			20–80% RH (no condensation)
	Overvoltage category			ll
	Pollution degree			2
Weight				Approx. 30 kg
^1 In the range of 20 mm × 20 mm 0.79" × 0.79" within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F at the focused focal point position. ^2 In the range of 5 mm × 5 mm 0.20" × 0.20" within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F at the focused focal point position ^3 In accordance with ISO10360-7, within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F at the focused focal point position, and with a load weighing 2 kg or less on the stage (L = amount of X/Y stage movement in mm units) ^4 In accordance with ISO10360-7, within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F, set to a maximum measurement of 50 mm 1.97" or less, (L = amount of Z stage movement in mm units). ^*5 +15 to 35°C +59 to 95°F with X/Y stage travel speed of 80 mm/s.

Keyence KV-CAL16 Keyence

0.00 kr

Sold Out

Specifications

Model				KV-CAL16
Focal distance				16 mm 0.63"
F-stop				F1.6 to CLOSE
Minimum working distance				0.4 m 1.3'
Supported cameras				KV-CAC1H/KV-CAC1R

Keyence FU-F38H Keyence

0.00 kr

Sold Out

Specifications

Model		FU-F38H
Type		Definite-reflective model
Standard detection object		Mirrored surface with a reflectivity of approximately 98%
Detection distance	TERA	0.3 to 2.3 mm 0.0118" to 0.0906"^*1
	MEGA
	ULTRA	0.3 to 2.2 mm 0.0118" to 0.0866"^*1
	SUPER	0.4 to 2.0 mm 0.0157" to 0.0787"^*1
	TURBO	0.5 to 1.8 mm 0.0197" to 0.0709"^*1
	FINE	0.6 to 1.6 mm 0.0236" to 0.0630"^*1
	HSPD	—^*1
	S-HSPD
Minimum bend radius	Fiber cable	R4 mm R0.14" or more
	Film fiber	No bending^*2
Tightening torque	Tip detector/relay case	4.3 cN•m (M1.6)
Length	Fiber cable	Approx. 1000 mm 39.37" (free-cut)
	Film fiber	Approx. 131 mm 5.16"
Environmental resistance	Ambient temperature	5°C to 60°C 41°F to 140°F Up to 70 mm 2.76" from film fiber unit end: 5°C to 105°C 41°F to 221°F^3^4^*5
	Relative humidity	35 to 85% RH (No condensation)
Material	Fiber cable	Fiber coating: Polyethylene, Fiber core: Acrylic
	Relay case	PC, SUS304
	Film fiber	Polyimide, Special optical resin, SUS304
Accessories		Fiber cutter, FU adapter, Usage Precautions sheet
Weight		Approx. 3 g
^1 Values are for FS-N40 Series devices with standard detectable objects. ^2 Do not fix the fiber in a bent state for use. Temporary bends of R10 mm R0.39" or more are possible during handling (does not apply to tip detector). ^3 Use in dry conditions in temperatures exceeding 60°C 140°F. ^4 The recommended maximum ambient temperature is 90°C 194°F for constant use of a fiber unit in a high-temperature environment. ^*5 Contact KEYENCE for use in situations exceeding those listed above.

Keyence OP-88638 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88638
Type				2-axis adjustment mounting bracket (when illumination unit is used)
Weight				Approx. 260 g

Keyence FU-63T Keyence

0.00 kr

Sold Out

Specifications

Model		FU-63T^*1
Beam emitting direction		Top
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.3×2
Minimum bend radius		R25 mm0.984"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 10 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence OP-85584 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-85584
Overview				This is a connector cable for the M8 connector sensor. This connector cable is made of polyurethane (PUR), which has excellent oil resistance.
Applicable product				M8 connector sensor
Cable end				M8 L-shaped connector - Loose wire
Length				2 m 6.56'
Material				Cable: Polyurethane (PUR)
Weight				Approx. 65 g