Machine Vision Systems

0.00 kr

Sold Out

Specifications

Model		SJ-Q036
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 Vmax
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±3 V ^*1
Clean rating		ISO14644-1 Class 3 ^*2
Installation distance		10 mm 0.39" or more
Control input	Static elimination stop input	NPN open collector or non-voltage contact signal
Control output	Ion level warning, condition warning, alarm output	NPN open collector Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Communication functions		Remote control
Average power consumption		Normal operation: 8.4 W, LPC mode: 4.1 W ^*3
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc1/8
Air supply pressure		0.1 to 0.5 MPa 14.50 to 72.52 PSI (recommended air pressure: 0.2 MPa 29.01 PSI)^*4
Effective length		440 mm 17.32" ^*5
Total length		350 mm 13.78"
No. ofelectrodes		5
Rating	Power voltage	24 to 36 VDC±10%
	Current consumption	Normal operation: 700 mA or less, LPC mode: 170 mA (typical) ^*3
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	85% RH or less (no condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		690 g 24.35 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81", Air supply pressure: 0.2 MPa 29.01 PSI, Frequency: Highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH, Measurement position: Bar Center ^2 Contact us for detailed conditions. ^3 24 VDC ^4 If you wish to use the air purge function with intermittent air supply, contact us. ^*5 Effective length is for static elimination range when installation distance is 100 mm 3.94".

Keyence OP-87404 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87404
Type				Adjustable Bracket
Applicable product				LR-Z Series
Material				Nickel-plated / SUS430 zinc, Volt: nickel plated steel bracket, Nut: Nickel-plated iron, the sensor mounting screws: SUS316L
Weight				Approx. 95 g

Keyence SI-F1001V Keyence

0.00 kr

Sold Out

Specifications

Model			SI-F1001V
Separate type			SI-F1001/SI-FD500
Type			Built-in main controller type
No. of connectable spectrum units			2
Display	Minimum display unit		0.001 µm
	Display range		±999.999 µm to ±9999.99 mm (7 settings selectable)
	Display cycle		10 times/sec.
Terminal block	Laser remote interlock input		Non-voltage input^*1
	TIMING1 input
	RESET1 input
	Auto-zero1 input
	Laser control input
	Analog voltage output		±10 V x 2 outputs, Output impedance: 100 Ω^*1
	Analog current output		4 to 20 mA x 2 outputs, Maximum load resistance: 350 Ω^*1
	Alarm output		NPN open-collector output (N.C.)^*1
	General comparator output		NPN open-collector output^*1
Expansion connector	TIMING2 input		Non-voltage input^*1
	RESET input
	Auto-zero input
	Program switch input		Non-voltage input x 3 inputs^*1
	Alarm output		NPN open-collector output (N.C.)^*1
	Comparator/ binary output	Binary output	Measured value data output (21 bits) OUT selectable NPN open-collector output^*1
		Strobe output	NPN open-collector output^*1
		Binary selection output
		Binary selection input	Non-voltage input^*1
RS-232C interface			Measured data output and control input/output (Baud rate selectable to 115,200 bps max.)
USB interface			USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)
Ethernet interface			100Base-TX/10Base-T
Major functions			12 Out simultaneous measurement calculation, average, filter, scaling measurement, measured value alarm, tolerance setting, auto-zero, data storage, light monitor, 8-program memory, interferometer mode, mask, connection of setting support software, etc.
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption		One head connected: 0.6 A or less. Six heads connected: 1.5 A or less.
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F^*2
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 0.5 mm 0.02", 2 hours in each of the X, Y, and Z directions
Weight			Approx. 600 g
^1 • NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. • Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. • Part of the input/output circuit of the SI Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring". ^2 When two or more expansion controllers are connected, the ambient temperature is 0 to +40 °C 32 to 104 °F.

Keyence SV-D3D Keyence

0.00 kr

Sold Out

Specifications

Model				SV-D3D
Type				Electromagnetic brake cable
Length				3 m 9.8'
Note				Applicable servo amplifier capacity: 1 k to 5 kW

Keyence CA-EC80LJ Keyence

12,532.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87770 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-M150AS Keyence

10,286.00 kr

Only 1 unit left

Specifications

Model				SV2-M150AS
General specifications	Applicable servo amplifier			SV2-150L2
	Rated output			1.3 kW
	Rated torque			8.34 N·m ^*1
	Instant maximum torque			23.3 N·m
	Rated current			10.7 Arms
	Instant maximum current			28 Arms
	Rated rotation speed			1500 min^-1
	High rotation speed			3000 min^-1
	Torque constant			0.891 N·m/Arms
	Rotor moment of inertia			19.9 ×10^-4kg·m²
	Rated power rating			35.0 kW/s
	Rated angle acceleration			4190 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (up/down, left/right) 24.5 m/s² 80.4'/s² (forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			phase F
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			5 ×
	Approx. weight			7.1 kg
^*1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink.

Keyence FU-59U Keyence

1,259.00 kr

Only 8 units left

Specifications

Model		FU-59U^*1
Optical axis diameter (Standard target to be detected)		ø0.5 mm0.02"
Fibre unit length		1 m39.37" free-cut
Minimum bend radius		R2 mm0.079"
Minimum detectable object		Opaque material with a diameter of 0.005 mm0.0002" ^*2
Tightening torque		0.15 Nm
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Material		Core fiber : acrylic, fiber sheath : nylon, case : SUS303
Accessories		Fiber cutter, FU adapter
Weight		Approx. 4 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence FL-CP80 Keyence

4,287.00 kr

Only 1 unit left

Specifications

Model				FL-CP80
Total length (at 25 °C)				807
Measurement range (dead zone excluded)				757 (737)^*1
Weight				Approx. 470 g
^*1 Values for water. For oil

Keyence OP-87043 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87369 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87369
Type				External protective glass
Applicable product				MD-T1000 Series
Number included				1 sheet of glass
Note				Installing this optional accessory eliminates the need to perform maintenance such as optical lens cleaning. Use this optional accessory when you want to achieve stable operation that is not affected by the surrounding environment.

Keyence VS-C160CX Keyence

0.00 kr

Sold Out

Specifications

Model		VS-C160CX
Storage	Internal storage	3 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Image size	1/2.9"
	Pixel size	3.45 μm 0.14 Mil
	Frame rate	83 fps
Lens	Mount	C-mount
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1
Functions	Output image pixels	1440 × 1072
	Exposure time	0.015 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*2
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		93.2 mm × 52.6 mm × 66 mm 3.67" × 2.07" × 2.60"
Case temperature		0°C to 65°C 32 to 149°F ^*3
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*4
Weight		Approx. 420 g 14.83 oz
^1 Using the configuration software, format the media before use. ^2 Maximum instantaneous current. Average current is below current consumption (including lighting). ^3 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^4 ESD-Safe, IEC61340-5-1 compliant.

Keyence OP-89264 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-89264^*1
Maximum input voltage				300 V DC+AC peak
Maximum allowable voltage to ground				300 V CAT II *When connected to NR-HV04/NR-FV04 Measurement terminal, GND terminal 300 Vrms (CAT II)
Attenuation ratio				1:1
Connector				Insulated BNC connector
Cable length				150 cm
Weight				Approx. 120 g
^*1 These specifications refer to the probe only. When connected to a measurement device, refer to the maximum input voltage and amount of ground voltage for the device.

Keyence XG-X2002 Keyence

60,010.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FS-V21R Keyence

3,087.00 kr

Only 5 units left

Buy the Keyence FS-V21R - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FS-V21R is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence OP-42280 Keyence

3,963.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XG-8500LP Keyence

15,326.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88839 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-E100L Keyence

29,967.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-Q20CH Keyence

13,235.00 kr

Only 5 units left

Buy the Keyence FD-Q20CH - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FD-Q20CH is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence ER-M08FNC Keyence

0.00 kr

Sold Out

Specifications

Model		ER-M08FNC
Type		Compact all-metal shielded type Thin type t = 4.7 mm Connector (M8 3-pin) NPN output
Power supply cable length		― ^*1
No. of control outputs		1
Output mode		N.O.
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*2
Response frequency		50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less, Max. 50 mA
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	910 mW or less (38 mA or less at 24 V, 57 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing)
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material	Head	SUS316L, PBT Epoxy resin
	Amplifier	Header-to-amplifier cable: TPU, Case: PBT/TPU [Connector] Indicator: LCP, Connector metal: SUS303, Connector: LCP [Cable] Indicator: TPU, Power cable: PVC
	Accessories	―
Accessories
Weight		Approx. 20 g 0.71 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used.

Keyence IV4-CP70 Keyence

10,716.00 kr

Only 5 units left

Specifications

Model		IV4-CP70
Display panel		7-inch TFT Color LCD: 1024×600 (WSVGA)
Compatible sensor		IV4 Series, IV3 Series, IV2 Series, IV Series
Backlight	Method	White LED
	Duration	Approx. 50,000 hours (25°C 77°F)
Interface	Touch panel	Analog resistive type
	Ethernet	M12 8-pin X-code connector (1000BASE-T/100BASE-TX) ^*1
	USB	A-type connector: 1 port (HS compatible, for memory expansion/mouse connection)
Languages		English, Japanese, Chinese (Simplified), Chinese (Traditional), Korean, German, Italian, French, Spanish, Portuguese, Czech, Hungarian, Polish, Thai ^*2
Network function		VNC server ^*3
Expanded memory		USB memory stick/microSD card (microSD/microSDHC) ^*4
Power supply	Power voltage	24 VDC +25%/-20%
	Power consumption	0.9 A or less (at 19.2 V)
	Average power consumption	6.0 W
Environmental resistance	Enclosure rating	IP40
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing) ^*5
	Relative humidity	85% RH or less (no condensation)
	Drop resistance	1.3 m 4.3' over concrete (2 times, any direction)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G² /Hz for X, Y and Z directions
Material		Case: PC. Power supply connector: Brass + nickel plating. Ethernet connector: Zinc alloy + nickel plating/LCP. USB connector cover: EPDM. Stylus: POM
Weight		Main unit: Approx. 540 g 19.06 oz With wall-mounting adapter and stylus attached: Approx. 590 g 20.83 oz
^1 Only for connection to IV4 Series/IV3 Series/IV2 series/IV series. ^2 When connecting to the IV4 Series. When connecting to the IV3 Series, IV3-CP50 languages will apply. When connecting to the IV2 Series, IV2-CP50 languages will apply. When connecting to the IV Series, IV-M30 languages will apply. ^3 The LCD panel display cannot be used when the VNC server is in use. ^4 Use KEYENCE-recommended parts. ^*5 Value when installed vertically. For other installations, use in the temperature range of 0 to +40°C 32 to +104°F (no freezing).

Keyence SJ-M100 Keyence

16,490.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MD-XAD1A Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.