Machine Vision Systems

Keyence OP-88874 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-SP2P Keyence

7,403.00 kr

Only 1 unit left

Specifications

Model				GL-SP2P
Type				Standard cable
Applicable product				GL-S Series main unit
Number included				1 (set includes transmitter and receiver)
Cable end				Main unit connection connector - Loose wires
Output				PNP
Number of core				6
Length				2 m 6.56'
Note				For use with wire synchronization and optical synchronization systems
Weight				120 g

Keyence CV-X452A Keyence

87,749.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89058 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ER-M18FNC Keyence

0.00 kr

Sold Out

Specifications

Model		ER-M18FNC
Type		Compact all-metal shielded type Thin type t = 8 mm Connector (M8 3-pin) NPN output
Power supply cable length		― ^*1
No. of control outputs		1
Output mode		N.O.
Button		None
Button	Function	―
Detecting distance		10 mm 0.39" ±10% ^*2
Response frequency		50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less, Max. 50 mA
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1010 mW or less (43 mA or less at 24 V, 64 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing)
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material	Head	SUS316L, PBT Epoxy resin
	Amplifier	Header-to-amplifier cable: TPU, Case: PBT/TPU [Connector] Indicator: LCP, Connector metal: SUS303, Connector: LCP [Cable] Indicator: TPU, Power cable: PVC
	Accessories	―
Accessories
Weight		Approx. 80 g 2.82 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used.

Keyence OP-88379 Keyence

0.00 kr

Sold Out

Specifications

Model		OP-88379
Compatible light model		CA-DQP12X
Environmental resistance	Ambient temperature	0 to +40 °C
	Relative humidity	85% RH or less
Weight		Approx. 80 g

Keyence OP-89117 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-89117
Type				M5 L-shaped bracket
Material				SUS304
Weight				Approx. 10 g 0.35 oz

Keyence KZ-16T Keyence

7,758.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-130 Keyence

29,676.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AP-11SK Keyence

3,378.00 kr

Only 1 unit left

Specifications

Model		AP-11SK
Type		Negative Sensor Head
Rated pressure		-29.9 to 0 inchHg
Fluid type		Gases and liquids compatible with 304 and 630 stainless steel
Type of pressure		Gauge pressure
Repeatability		0.5 % of F.S. max.
Connection port		1/8 NPT
Environmental resistance	Enclosure rating	IP67
	Pressure resistance	72.5 PSI
	Ambient temperature	-10 to 70°C(14 to 158°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 3 hours respectively
	Shock resistance	500 m/s² in X, Y, and Z directions 10 times respectively (60 times in total)
Material		Diaphragm pressure port: TYPE S17400 stainless steel, Pressure port: 304 stainless steel, Throttle: 304 stainless steel (AP-14SK/15SK/16SK only)
Accessories		Sensor head connector: 1
Weight		Approx. 120 g

Keyence OP-84399 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-84399
Type				Regenerative resistor
Applicable product				SV
Note				Common to 50 W to 1 kW
Weight				Approx. 430 g

Keyence FD-H32K Keyence

9,158.00 kr

Only 1 unit left

Specifications

Model		FD-H32K
Type		High-temperature model
Supported pipe diameter		1" (25A), ø28–37 ø1.10"-1.46" 1 1/4" (32A), ø37–44 ø1.46"-1.73"
Supported pipe materials		Metal piping, hard plastic piping^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–180°C 32–356°F (no freezing on pipe surface)^2^3
Maximum rated flow		1" (25A) : 200 L/min 52.8 gal/min 1 1/4" (32A) : 300 L/min 79.3 gal/min
Zero cut flow rate		1.0 L/min 0.3 gal/min (variable, initial value)
Detection principle		Delta TOF + Pulse Doppler
Function for automatic correction for speed of sound in liquid		Yes
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 1)
	Integrated flow	0.01/0.1/1 (L) (default value: 1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		Between 10 and 100% of F.S.: ±3.0% of RD^4^5 Between 0 and 10% of F.S.: ±0.3% of F.S.^4^5
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^4^6
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		—
Network support		IO-Link^*7
Heat calculation function	Unit	MJ/h kW kBTU/h^*8
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*8
	Pulse output increments (MJ)	0.02–999.99^*8
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*9
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*10
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PEEK/PPS/PET/PAR/SUS304 Sensor element: special rubber; Mounting bracket: SUS304/SUSXM7
Weight		approx. 680 g 23.99 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 When using with fluids at temperatures of 140°C 284°F or greater, equip with the separately sold ultra-high-temperature couplant FD-HK1/HK2/HK3. Furthermore, the display unit must be separated from the sensor based on the de-rating. ^4 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^5 This is the value for when the zero point is adjusted, for a constant 25°C 77°F environment, taking into account the linearity and span error. ^6 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^7 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^8 Can be used when two temperature sensors (sold separately) are connected. ^9 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^10 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence GS-P12C20 Keyence

0.00 kr

Sold Out

Specifications

Model				GS-P12C20
Type				Standard/High performance type (12-pin)
Length				20 m 65.62'
Weight				Approx. 950 g

Keyence OP-88894 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88894
Female				M12 8-pin Straight
Male				Strand wire
Length				5 m 16.4'
Material				cable: PVC connector: SUS316L

Keyence CA-DRR7 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VT3-S10 Keyence

31,308.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-RP5N Keyence

0.00 kr

Sold Out

Specifications

Model				GL-RP5N
Type				Unit connection cable
Number included				1 cable
Cable end				Main unit plug (Grey) - Loose wires
Length				5 m 16.40'
Material				Main unit connection connector: PBT, Cable: PVC
Note				Brown and blue: 22 AWG (nominal cross section: 0.34 mm²), other: 26 AWG (nominal cross section: 0.14 mm²)
Weight				Approx. 200 g

Keyence OP-88891 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-34931 Keyence

9,659.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89128 Keyence

0.00 kr

Sold Out

Specifications

Model		OP-89128
Type		High-flex ^1 ^2
Sensor side	Connector size	M8 3-pin
	Appearance	Straight
Cable connector	Connector size	M12 4-pin
	Appearance	Straight
Length		2 m 6.6'
Material		Cable: PVC, Connector: Nickel-plated brass
Weight		Approx. 75 g 2.65 oz
^1 Use a heat/cleaning-resistant cable for the weld-resistant all-metal type in environments of 80°C 176°F or higher and for the environment-resistant all-metal type in environments of -25°C -13°F or lower or at 80°C 176°F or higher. ^2 When used with the general-purpose all-metal type or the environment-resistant all-metal type, the enclosure rating is IP67.

Keyence OP-85497 Keyence

3,198.00 kr

Only 1 unit left

Specifications

Model				OP-85497
Type				Connector Cable
Applicable product				M8 connector for PZ-G standard (Rectangular) models
Number included				1 pcs.
Cable end				M8 L-shaped connector - Loose wire
Length				2 m 6.56'
Material				Cable: Polyvinyl chloride (PVC)
Weight				Approx. 55 g

Keyence N-48 Keyence

6,317.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FT-H30 Keyence

3,612.00 kr

Only 5 units left

Specifications

Model		FT-H30
Type		Mid to low temperature, Long-range
Rated temperature range		32 to 932°F (0 to 500°C) ^*1
Displayable temperature range		-58 to +968°F (-50 to +520°C)
Detecting distance		Unlimited ^*2
Measuring distance / View diameter (example)		200/ø15 mm 7.87"/ø0.59" 400/ø18 mm 15.75"/ø0.71" 600/ø33 mm 23.62"/ø1.30"
Sight		2-point visible laser beam ^*3
Detecting element		Thermopile
Detecting wavelength		8 to 14 μm
Repeatability		±0.9°F (±0.5°C)
Emissivity (ε) correction		0.10 to 1.99 (0.01 step)
Environmental resistance	Ambient temperature	14 to 131°F (-10 to 55°C), No freezing
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
	Shock resistance	500 m/s², 10 times in each direction of each axis (X, Y, Z), 60 times in total
Material		Case: Reinforced glass plastic, Infrared collector lens: Germanium, Laser transmitter: Polyarylate, Cable: Vinyl chloride, Mounting bracket: SUS304, Mounting screw: Stainless steel
Accessory		Mounting bracket
Weight		Approx. 120g
^1 Repeatability is guaranteed within the rated temperature range. ^2 Place at a distance so that object appears 1.5 times larger than the view diameter. ^*3 Visible semiconductor laser beam wavelength 655 nm, Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10). The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice.

Keyence EV-118MC Keyence

0.00 kr

Sold Out

Specifications

Model		EV-118MC
Type		DC , Shielded
Shape		M18
Detecting distance		5 mm 0.20" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		18 x 18 mm 0.71" x 0.71"
Hysteresis		10% max. of detecting distance
Response frequency		350 Hz
Operation mode		N.C.
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -25 to +70°C -13 to +158°F
Control output (switching capacity)		5 to 200 mA
Protection circuit		Reversed polarity, short-circuit, surge voltage
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 20 % or less
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 3 times in each of the X, Y, and Z directions
Case material		Nickel-plated brass
Accessories		Nut × 2, toothed washer × 1, instruction manual
Weight		Approx. 150 g