Vision Systems

€0,00

Sold Out

Specifications

Model				OP-87415
Applicable product				SJ-E Series
Note				Attaching this product to the SJ-E Series prevents bending. Attach this product at equal intervals.

Keyence OP-94737 Keyence

€0,00

Sold Out

Specifications

Model				OP-94737
Overview				Connector cable with M12 on the both edges for connection.
Applicable product				For extension of standard cables of connector sensors FD-P and FW.
Cable end				M12 straight connector - M12 straight connector
Length				1 m 3.28'

Keyence TM-CX10U Keyence

€0,00

Sold Out

Specifications

Model		TM-CX10U
Max. connections	Number of steps	2
	Cable length	30 m 98.4' total (10 m 32.8' between devices)
Environmental resistance	Ambient temperature	0 to +45°C 32 to 113°F
	Relative humidity	35 to 85% (No condensation)
Weight		Approx. 60 g

Keyence OP-88145 Keyence

€6.198,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VT-BW10 Keyence

€0,00

Sold Out

Specifications

Model				VT-BW10
Type				Weatherproof cover
Applicable product				VT5-W10

Keyence GL-VM119FN Keyence

€0,00

Sold Out

Specifications

Model			GL-VM119FN
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			119
Total length			1200 mm 47.24"
Detection height			1180 mm 46.46"
Protection height			1204 mm 47.40"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	8.8
		OFF→ON	52.8 ^*3
		All blocked→ON	65.3 ^*4
	With channel A or B	ON→OFF	29.0
		OFF→ON	82.5 ^*3
		All blocked→ON	124.2 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	141 ^*5
		Receiver	156 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	63 ^*5
		Receiver	70 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		780 g 27.53 oz
	Receiver		790 g 27.88 oz
	Total		1570 g 55.42 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence OP-87310 Keyence

€0,00

Sold Out

Specifications

Model				OP-87310
Overview				O-ring for conversion adapter female.
Applicable product				GP-M adapter (G female) OP-87283
Number included				1 pcs.
Material				FKM
Note				Attached to the GP-M adapter (G female).

Keyence OP-88386 Keyence

€0,00

Sold Out

Specifications

Model				OP-88386
Applicable product				KV-CA1H, KV-CA1W

Keyence CA-LMA4 Keyence

€0,00

Sold Out

Specifications

Model		CA-LMA4^*1
Type		Coaxial
Optical magnification (reference magnification)		x4
Magnification range		Approx. ±5 % relative to reference axis
WD (at reference magnification)		70.3 mm 2.77" ^*2
Compatible image sensor size		1/2"
Field of view (at reference magnification)	1/3"	0.9 x 1.2 mm 0.035" x 0.047"
	1/2"	1.2 x 1.6 mm 0.047" x 0.063"
	2/3"	-
F-stop range (aperture)		26.5
Depth-of-field		172 µm 6.77 Mil^*3
Max. TV distortion		-0.22 %
Resolution		4.5 µm 0.18 Mil^*4
Mount		C-mount
Ambient temperature/humidity range		0 to +50 °C 32 to 122 °F, 80 % RH (No condensation)
Weight		Approx. 66 g
^1 The above values are all calculated according to optical design values. Actual values for individual lenses will differ according to precision of assembly. ^2 Working distance indicates a working distance of each lens at reference magnification. Working distance will vary depending on magnification adjustment. (Excluding CA-LM1/LMA1) ^3 The indicated depth-of-field is a theoretical value that assumes 1/2" or 2/3" image sensor size and a horizontal resolution of 320 TV lines. (Circle of least confusion is 40 µm 1.57 Mil in the image) ^4 The smallest resolvable feature able to be detected under 550 nm wavelength light.

Keyence IM-PH4 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DEB10X Keyence

€0,00

Sold Out

Specifications

Model		CA-DEB10X
Light source	Color	Blue
Control interface	Connector	Dedicated 12-pin circular connector
Power source		Supplies power via control interface
Environmental resistance	Enclosure rating	IP67 (IEC 60529)
	Ambient temperature	0–40°C
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		116 mm × 116 mm × 53 mm
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device case: Magnesium die-casting Front cover: Polycarbonate, acrylic ^*1
Weight		Approx. 390 g
^*1 ESD-safe and IEC 61340-5-1-compliant when used with the OP-88808 (protective attachment for high-intensity smart ring lighting).

Keyence CA-D1W Keyence

€594,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF25Y Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence NU-EP1 Keyence

€295,95

Only 5 units left

Specifications

Model		NU-EP1
Name		Communication unit that supports EtherNet/IP™
Ethernet Specifications	Compliant standards	IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3af (Power over Ethernet, Class 3)
	Transmission rate	10 Mbps (10BASE-T), 100 Mbps (100BASE-TX)
	Transmission media	STP or category 3 or higher UTP (10BASE-T),^*1 STP or category 5 or higher UTP (100BASE-TX)
	Maximum cable length	100 m 328.1' (the length between this unit and the Ethernet switch)
	Max. number of connection stages	4 (10BASE-T) 2 (100BASE-TX)^*2
EtherNet/IP™	Compliant functions	Cyclic communication (implicit messages), message communication (explicit messages)
	Number of connections	64
	RPI (Transmission cycle)	0.5 to 10,000 ms (in units of 0.5 ms)
	Tolerable communication bandwidth for cyclic communication	6,000 pps
	Message communication	Supports UCMM, Class 3
	Conformance test	Supports version A7
Sensor connection	Connectable sensors	Sensor amplifier that supports N-bus^*3
	Number of connectable units	16 maximum^*4
	Power supply	Power is supplied by this unit through the sensor amplifier connection connector.
	Allowable passing current	Total: 1,200 mA or less^*5
	Power during PoE power receiving	Supply voltage: 24 V ±10 %, supply current: 360 mA or less^6 (UL Class 2)^7
Indicator lamp		Link/activity indicator (LINK/ACT): green LED, module status indicator (MS): 2-color (green and red) LED, network status indicator (NS): 2-color (green and red) LED, sensor communication indicator (N-bus): 2-color (green and red) LED
Power voltage		24 VDC ±10 %, ripple (P-P): 10 % or less (when using the power supply connector); 48 VDC (57 V maximum; during PoE power receiving)
Power consumption		1,500 mW or less (60 mA or less at 24 V)^*8
Environmental resistance	Pollution degree	2
	Ambient temperature	-20 to +55 °C -4 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main unit case and dust cover: polycarbonate, power supply connector: polyamide (plug), PBT (socket)
Accessories		Instruction manual, power supply connection connector, end unit x 2
Weight		Approx. 80 g (including connectors)
^1 When using the PoE power receiving function to form a connection, use an STP cable or category 5 or higher UTP cable. ^2 When using the switch, there is no limit on the number of units that can be connected. ^3 "N-bus" is the name of KEYENCE's wiring-saving system for sensor amplifiers. ^4 This varies depending on the connected sensor amplifiers. ^5 This is the current that can be supplied to the main unit or to the sensor amplifier connected to the main unit. ^6 This varies depending on the ambient usage temperature. (-20 to 45 °C -4 to 113°F: 360 mA or less, 45 to 50 °C 113 to 122°F: 260 mA or less, 50 to 55 °C 122 to 131°F: 140 mA or less) ^7 Power which can be supplied to the sensor amplifi er when using the PoE power receiving function ^8 The current supplied to the connected sensor amplifiers is not included.

Keyence OP-89130 Keyence

€0,00

Sold Out

Specifications

Model		OP-89130
Type		High-flex ^1 ^2
Sensor side	Connector size	M8 3-pin
	Appearance	Straight
Cable connector	Connector size	M12 4-pin
	Appearance	Straight
Length		10 m 32.8'
Material		Cable: PVC, Connector: Nickel-plated brass
Weight		Approx. 270 g 9.53 oz
^1 Use a heat/cleaning-resistant cable for the weld-resistant all-metal type in environments of 80°C 176°F or higher and for the environment-resistant all-metal type in environments of -25°C -13°F or lower or at 80°C 176°F or higher. ^2 When used with the general-purpose all-metal type or the environment-resistant all-metal type, the enclosure rating is IP67.

Keyence LV-L02 Keyence

€0,00

Sold Out

Specifications

Model		LV-L02
Type		Lens attachment for the LV-NH47/LV-H47
Area width	Standard mode	Detecting distance at 55 mm 2.17": 17 mm 0.67" Detecting distance at 70 mm 2.76": 20.5 mm 0.81" Detecting distance at 85 mm 3.35": 24 mm 0.84"
	When slit 1 is equipped	Detecting distance at 55 mm 2.17": 13.0 mm 0.51" Detecting distance at 70 mm 2.76": 15.5 mm 0.61" Detecting distance at 85 mm 3.35": 18.0 mm 0.71"
	When slit 2 is equipped	Detecting distance at 55 mm 2.17": 11.0 mm 0.43" Detecting distance at 70 mm 2.76": 13.0 mm 0.51" Detecting distance at 85 mm 3.35": 15.0 mm 0.59"
	When slit 3 is equipped	Detecting distance at 55 mm 2.17": 8.5 mm 0.33" Detecting distance at 70 mm 2.76": 10.0 mm 0.39" Detecting distance at 85 mm 3.35": 11.5 mm 0.45"
	When slit 4 is equipped	Detecting distance at 55 mm 2.17": 6.0 mm 0.24" Detecting distance at 70 mm 2.76": 7.5 mm 0.30" Detecting distance at 85 mm 3.35": 9.0 mm 0.35"
Area thickness		Detecting distance at 55 mm 2.17": 3.0 mm 0.12" Detecting distance at 70 mm 2.76": 3.4 mm 0.13" Detecting distance at 85 mm 3.35": 3.8 mm 0.15"
Material	Case	Polyacetal (main body), Arton (lens)
Weight		Approx. 1 g

Keyence OP-87445 Keyence

€212,95

Only 5 units left

Specifications

Model				OP-87445
Type				Panel power cable
Cable end				M8 4-pin - strand wire
Length				10 m 32.8'

Keyence PR-FB15C3PL Keyence

€340,95

Only 5 units left

Specifications

Model		PR-FB15C3PL^*1
Type		Reflective (Background suppression)
Output		PNP
Shape		Flat
Cable connection		M8 connector (3 pin)
Detection distance		1 to 15 mm 0.04" to 0.59"
Number of control outputs		1 output
Output operation	Output 1	-
	Output 2	Light-ON
Response time	Output 1	-
	Output 2	ON→OFF: 2.7 ms, OFF→ON: 0.5 ms
Sensitivity adjustment		None
Spot diameter		Approx. 2.5 x 4.5 mm (at 15 mm)
Light source		4 element, point light source, red LED (650 nm)
Mutual interference prevention function		4 sensors
Indicator lamp		Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)
Control output		30 VDC or lower, 50 mA or lower Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.
Protection circuit		Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection
Rating	Power voltage	10 to 30 VDC, including 10 % ripple (P-P)
	Current consumption	19 mA
Environmental resistance	Enclosure rating	IP67 (IEC60529), 4X, 6P, 13 (NEMA250)
	Insulation resistance	20 MΩ or higher (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower
	Ambient temperature	-25 to +55 °C -13 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin
Accessories		Instruction Manual
Weight		Approx. 10 g
^*1 The M8 connector (3 pin) type has 1 control output. If "D" is at the end of the part number, the sensor is equipped with a Dark-ON output. If "L" is at the end of the part number, the sensor is equipped with a Light-ON output. Example: The PR-M51C3PL has a Light-ON output.

Keyence KV-16TW Keyence

€570,95

Only 4 units left

Buy the Keyence KV-16TW - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence KV-16TW is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence SV-E3A Keyence

€0,00

Sold Out

Specifications

Model				SV-E3A
Type				Encoder cable, Standard
Length				3 m 9.8'
Note				for 1 k to 5 kW motor

Keyence FR-LP20L Keyence

€0,00

Sold Out

Specifications

Model		FR-LP20L
Type		Long range Chemical model
Measuring range		Up to 15 m 49.2'^*1
Display range		Up to 25 m 82.0'^*1
Measurable dielectric constant of medium		2 or higher^*2
Resolution		1 mm 0.04"
Precision		Up to 0.1 m 0.3': ±10 mm 0.39"; 0.1 to 10 m 0.3' to 32.8' : ±1 mm 0.04"; 10 to 15 m 32.8' to 49.2': ±2 mm 0.08" ^*3
Response time		0.4 s, 1.5 s, 4 s (default value), 10 s
Tank pressure		-0.1 to +0.1 Mpa
Material	Tank interior	Lens: PTFE Internal packing: FKM Joint: PPS
	Housing	PPS PPSU
Connection diameter		G1-1/2 (40 A)
Output	No. of control outputs	Maximum 5
	Control output/auxiliary output	NPN/PNP open collector (switching type) 30 VDC or less, max 50 mA for each Residual voltage of 1.4 V or less (50 mA or less) N.O./N.C. Switching type IO2 is switchable to IO-Link
	Analog output	0–20 mA/4–20 mA maximum load resistance 260 Ω (Response time: 0.2 s after judgment output is confirmed [90% response])
External input		─
Network compatibility		IO-Link v1.1/COM2
Analog output accuracy	Resolution	1 mm 0.04"^*4
	Zero accuracy	±0.1 mA (zero point = 4 mA)^*4
	F.S. accuracy	±0.2 mA (full-scale = 20 mA)^*4
Power supply	Power voltage	24 VDC + 25%/–20% Including ripple Class 2 or LPS
	Power consumption	98 mA or less (Excluding Load Current)
Environmental resistance	Ambient temperature	Display part when combined and separated: –10 to +50°C 14°F to 122°F (no freezing)^5^6 Head when separated: –10 to +60°C 14°F to 140°F (no freezing)^5^6
	Relative humidity	Up to 85% RH (no condensation)
	Temperature of coupling used	–10 to +85°C 14°F to 185°F (no freezing)^5^6
	Vibration resistance	10–500 Hz Power spectral density: 0.816 G²; X, Y and Z directions
	Shock resistance	100 m/s² (10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Enclosure rating		IP67 (IEC60529), Enclosure Type 4X (NEMA250)
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent protection, and output surges
Weight		Approx. 400 g 14.11 oz
^1 Guaranteed value in water with the recommended installation. Static water can be measured up to the edge of the lens. An undetectable area on the short-range side is created due to the environment and measurement medium. The maximum measuring distance is also shortened. ^2 Measurement may not be possible depending on the shape and environment of the target. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement errors may occur depending on the customer’s environment. ^4 This is the guaranteed value from verification performed at KEYENCE inspection facilities with a load resistance of 250 Ω. Measurement errors may occur depending on the customer’s environment. ^5 The FR-S01 and FR-LM20L/LP20L can be used up to an ambient temperature setpoint of 10°C 50°F by selecting “Off when not in Operation” under “Screen Brightness.” ^6 When performing SIP with the FR-LS20L, do so for 1 hour or less with an ambient temperature of 40°C 104°F or less and an internal system temperature of 130°C 266°F. When performing SIP with the FR-S01/LM20L/LP20L, turn the power supply off, and then perform this operation for 1 hour or less with an ambient temperature of 40°C 104°F or less and an internal system temperature of 130°C 266°F. In addition, always install the KEYENCE optional ferrule mounting bracket and internal gasket.

Keyence CV-200M Keyence

€706,95

In stock, 15 units

Specifications

Model		CV-200M
Type		Camera^*1
Image element		1/1.8-inch monochrome CCD image receiving element, square-pixel/all-pixel reading, 2,010,000 pixels Unit cell size: 4.4 x 4.4 µm 0.17 x 0.17 Mil
Valid pixel count		1,920,000 pixels 1600 (H) x 1200 (V) ^*2
Pixel transfer frequency		40 MHz
Scanning system		Progressive (58.5 ms: 2,000,000-pixel mode, 47.6 ms: 1,000,000-pixel mode) Interlace (32.7 ms: 2,000,000-pixel mode, 27 ms: 1,000,000-pixel mode)
Transfer system		Digital serial transfer
Electronic shutter		1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 msec to 9000 msec can be set with numeric values.
Lens mount		C mount
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 110 g (not including lens)
^1 The CA-CN17 camera cable (17 m 55.8') and the CA-CN17R high-flex camera cable (17 m 55.8') cannot be used. ^2 In 1,000,000-pixel mode, 980,000 pixels (1024 x 960) serve as the processing area.

Keyence FU-35A Keyence

€682,95

Only 1 unit left

Specifications

Model		FU-35A
Detecting method		Diffuse Reflective
Size		M3
Detection arrangement		Coaxial
Fibre unit length		0.5 m
Shape		Straight
Minimum bend radius		R25 mm0.984"
Detection distance		20 mm0.787"^*1
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 5 g
^*1 The detecting distance is a value for white mat paper (the standard detection object) detections.

Keyence OP-82125 Keyence

€645,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.