Vision Systems

€438,95

Only 3 units left

Specifications

Model		AP-V41W
Type		Amplifier Unit, NPN
Applicable sensor head		AP-41M, AP-41, AP-43, AP-44
Display		4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18"), AI indicator (green) Display cycle: 10 times/s
Operation indicator		Red LED × 2 (corresponding to control output 1 and control output 2)
Display resolution		AP-41M/41/44: Standard mode 0.1 inchHg, High-resolution/Focus mode 0.01 inchHg AP-43: Standard mode 0.01 kgf/cm², High-resolution/Focus mode 0.02 Psi
Power consumption	Normal	12 V: 720 mW (60 mA) max., 24 V: 960 mW (40 mA) max.
	Eco mode	12 V: 480 mW (40 mA) max., 24 V: 720 mW (30 mA) max.
Display temperature characteristic		±1 % of F.S. or less
Hysteresis		Standard mode: 0.5 % of F.S., high-resolution mode: 0.1 % of F.S., hysteresis variable mode (F-2): variable
Response time (Chattering prevention function)		1/2.5/5/100/500 ms (selectable; 1 ms is used when high-speed mode is selected)
I/O	Analog output	1 to 5 V, output impedance: 1 kΩ or less (switchable with zero shift input)
	Zero-shift input	Input time: 2 ms or more (switchable with analog output)
	Control output	Maximum NPN open-collector output: 100 mA (40 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)^*1
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Polycarbonate
Accessories		Mounting bracket, head connection connector
Weight		Approx. 80 g (with 2 m cable)
^*1 20 mA or less when extended

Keyence VL-B1 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SI-H13 Keyence

€0,00

Sold Out

Specifications

Model				SI-H13^*1
Type				Configuration Software for the SI Series
Operating System				Windows 11 Pro Windows 10^2 Windows 7 (SP1 or later)^3 Windows Vista (SP2 or later)^4 Windows XP (SP3 or later)^5
CPU				Pentium III 1 GHz or higher (1.7 GHz or higher recommended)
Memory capacity				256 MB or more (1 GB or more recommended)
Available hard disk space				1 GB or more
Display				1024 x 768 pixels, 24-bit full color or better
PC interface				The PC must be equipped with one of these interfaces: USB: Revision 2.0 HighSpeed (USB1.1 compatible full speed)^6 LAN: 100BASE-TX, 10BASE-T^7 RS-232C (serial port)
^1 Use under an environment that exceeds the recommended environment of the your OS. ^2 Editions supported: Home, Pro, Enterprise. ^3 Editions supported: Home Premium, Professional, Ultimate. ^4 Editions supported: Ultimate, Business, Home Premium, Home Basic. ^5 Supports Professional and Home Edition. ^6 Does not support connection via a USB hub. ^*7 Does not support connection via private LANs or routers. Use in a 1:1 or local connection.

Keyence IV-G500CA Keyence

€900,95

In stock, 14 units

Specifications

Model		IV-G500CA
Type		Standard sensor model
Installed distance		20 to 500 mm 0.79" to 19.69"
View		Installed distance 20 mm 0.79": 10 (H) × 7.5 (V) mm 0.39" (H) × 0.30" (V) to Installed distance 500 mm 19.69": 200 (H) × 150 (V) mm 7.87" (H) × 5.91" (V)
Image sensor	Type	1/3 inch color CMOS
	Pixel	752 (H) x 480 (V) 29.61" (H) x 18.90" (V)
Focus adjustment		Auto^*1
Exposure time		1/10 to 1/50,000
Lights	Illumination	White LED
	Lighting method	Pulse lighting/DC lighting is switchable
Indicators		2 (the same display details for both indicators)
Environmental resistance	Enclosure rating	IP67^*2
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions^*3
	Shock resistance	500 m/s², 3 times in each of 6 directions^*3
Material		Main unit case: Zinc die-casting, Front cover: Acrylic (hard coat), Operation indicator cover: TPU
Weight		Approx. 75 g
^1 The focusing position can be automatically adjusted at the time of installation. Deactivated during the operation. Focusing position can be registered by program. ^2 Except when polarized filter attachment (OP-87899/OP-87900/OP-87901/OP-87902) is mounted ^*3 Except when IV-G dome attachment (IV-GD05/IV-GD10) is mounted

Keyence CA-D1MXE Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IM-XC100 Keyence

€0,00

Sold Out

Specifications

Model				IM-XC100
Type				Head
Image measurement	Field of view	Wide-field mode [mm inch]		ø100 ø3.94"
		High-precision mode [mm inch]		25 0.98" × 25 0.98"
	Minimum display unit			0.1 μm
	Repeatability	Within field of view (2σ)	Wide-field mode	1 µm
			High-precision mode	0.5 μm
	Measurement accuracy		Wide-field mode	3.5 µm^*1
			High-precision mode	1.8 µm^*2
Laser height	Reference distance			—
	Repeatability
	Spot diameter
	Linearity
	Laser class
Touch probe	Repeatability
	Measuring force
AF height	Repeatability
Illumination system	Transparent			Green LED, telecentric transparent illumination
	Coaxial			Color LED, white LED, four-division multi-angle illumination (electric)
				Green LED, slit ring (directivity) lateral illumination (electric)
				White LED coaxial illumination (optional)
Environmental resistance	Ambient temperature			+10 to 35°C +50°F to 95°F
Weight				10 kg 22.05 lb
^1 In the range of ø80 mm ø3.15", within the operating ambient temperature range of +23±1°C +73.4±1.8°F at the focal point position. ^2 In the range of 20 × 20 mm 0.79" × 0.79", within the operating ambient temperature range of +23±1°C +73.4±1.8°F at the focal point position.

Keyence EV-118FSO(2074) Keyence

€0,00

Sold Out

Specifications

Model		EV-118FSO(2074)^*1
Type		Spatter-resistant/Shielded
Shape		M18
Detecting distance		5.0 mm±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		18 x 18 mm 0.71" x 0.71"
Hysteresis		15% max. of detecting distance
Response frequency		350 Hz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -25 to +70°C -13 to +158°F
Control output (switching capacity)		5 to 200 mA
Protection circuit		Reversed polarity, short-circuit, surge voltage
Cable length		2 m 6.6'
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 20 % or less
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 3 times in each of the X, Y, and Z directions
Case material		Fluoro-chemical-coated brass
Accessories		Screw nut x 2, toothed washer x 1
Weight		Approx. 150 g
^*1 This product does not comply with the EMC directive. These models are connector type.

Keyence CV-X480F Keyence

€3.649,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88448 Keyence

€0,00

Sold Out

Specifications

Model				OP-88448
Length				2 m 6.6'
Material				PUR
Weight				Approx. 120 g 4.23 oz

Keyence CV-X292A Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-31784 Keyence

€0,00

Sold Out

Specifications

Model				OP-31784
Overview				Brackets to secure both sides of the SJ-B.
Applicable product				SJ-B

Keyence AP-32 Keyence

€279,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IM-H1T Keyence

€0,00

Sold Out

Specifications

Model				IM-H1T
Operating System				Windows 11, Windows 10 (64bit)
CPU				2 GHz or more (Corei3 or more)
Display				1024 x 768 pixels or greater
Memory capacity				4GB or more
Connection interface				Serial port or USB port
Available hard disk space				2GB or more
Software				.NET FrameWork 4.6.2 or later must be installed. Microsoft Excel 2016 or later, and language pack with the same language as the OS must be installed.
Note				-

Balluff MVBLUEFOX-MLC205C-XTWEVG Balluff

€0,00

Sold Out

Balluff SmartLight LED Indicator (P/N: MVBLUEFOX-MLC205C-XTW EVG). IO-Link controlled multi-segment LED stack light or indicator for machine status visualization. Provides programmable colors, segments, and animation patterns via IO-Link for at-a-glance process monitoring and operator guidance.

Balluff MVBLUECOUGAR-X102FG-1121 Balluff

€0,00

Sold Out

Balluff SmartLight LED Indicator (P/N: MVBLUECOUGAR-X102FG-1121). IO-Link controlled multi-segment LED stack light or indicator for machine status visualization. Provides programmable colors, segments, and animation patterns via IO-Link for at-a-glance process monitoring and operator guidance.

Balluff MVBLUECOUGAR-X102FC-1121 Balluff

€0,00

Sold Out

Balluff SmartLight LED Indicator (P/N: MVBLUECOUGAR-X102FC-1121). IO-Link controlled multi-segment LED stack light or indicator for machine status visualization. Provides programmable colors, segments, and animation patterns via IO-Link for at-a-glance process monitoring and operator guidance.

Balluff MVHYPERION-CLMREV3 Balluff

€0,00

Sold Out

Balluff SmartLight LED Indicator (P/N: MVHYPERION-CLM REV3). IO-Link controlled multi-segment LED stack light or indicator for machine status visualization. Provides programmable colors, segments, and animation patterns via IO-Link for at-a-glance process monitoring and operator guidance.

Balluff MV-O1218-10M-KO Balluff

€0,00

Sold Out

Balluff SmartLight LED Indicator (P/N: MV-O1218-10M-KO). IO-Link controlled multi-segment LED stack light or indicator for machine status visualization. Provides programmable colors, segments, and animation patterns via IO-Link for at-a-glance process monitoring and operator guidance.

Balluff MV-O1614-6M-KO Balluff

€0,00

Sold Out

Balluff SmartLight LED Indicator (P/N: MV-O1614-6M-KO). IO-Link controlled multi-segment LED stack light or indicator for machine status visualization. Provides programmable colors, segments, and animation patterns via IO-Link for at-a-glance process monitoring and operator guidance.

Balluff MV-O7528-FU-001 Balluff

€0,00

Sold Out

Balluff SmartLight LED Indicator (P/N: MV-O7528-FU-001). IO-Link controlled multi-segment LED stack light or indicator for machine status visualization. Provides programmable colors, segments, and animation patterns via IO-Link for at-a-glance process monitoring and operator guidance.

Balluff MVBLUECOUGAR-X102ECTTR Balluff

€0,00

Sold Out

Balluff SmartLight LED Indicator (P/N: MVBLUECOUGAR-X102EC TTR). IO-Link controlled multi-segment LED stack light or indicator for machine status visualization. Provides programmable colors, segments, and animation patterns via IO-Link for at-a-glance process monitoring and operator guidance.