keyence

€0,00

Sold Out

Specifications

Model		AP-V42AW
Type		Amplifier Unit, NPN
Applicable sensor head		AP-41M, AP-41, AP-43, AP-44
Set and display range		-15 to +110 % of F.S.^*1
Display		4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18"), AI indicator (green), Display cycle: 10 times/s
Operation indicator		Red LED x 2 (corresponding to control output 1 and 2)
Repeatability		±0.2 % of F.S.
Display resolution		AP-41M/41/44: Standard mode 0.1 inchHg, High-resolution/Focus mode 0.01 inchHg AP-43: Standard mode 0.01 kgf/cm², High-resolution/Focus mode 0.02 Psi
Power consumption	Normal	12 V: 720 mW (60 mA) max., 24 V: 960 mW (40 mA) max.
	Eco mode	12 V: 480 mW (40 mA) max., 24 V: 720 mW (30 mA) max.
Display temperature characteristic		±1 % of F.S. max.
Hysteresis		Variable (Standard: 0.5 % of FS; high-resolution/focus mode: 0.1 % of F.S.)
Response time (Chattering prevention function)		1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable)
I/O	Analog output	-
	Zero-shift input	Input time: 2 ms or more. (or analog output selectable)
	Control output	NPN open collector 20 mA max. (at 40 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Polycarbonate
Accessories		End Unit，Head Connector, and Expansion seal
Weight		Approx. 80 g (with 2-m 6.6' cable)
^*1 The focus range applies while in focus mode only.

Keyence AP-V42AWP Keyence

€778,95

Only 1 unit left

Specifications

Model		AP-V42AWP
Type		Amplifier Unit, PNP
Applicable sensor head		AP-41M, AP-41, AP-43, AP-44
Set and display range		-15 to +110 % of F.S.^*1
Display		4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18"), AI indicator (green), Display cycle: 10 times/s
Operation indicator		Red LED x 2 (corresponding to control output 1 and 2)
Repeatability		±0.2 % of F.S.
Display resolution		AP-41M/41/44: Standard mode 0.1 inchHg, High-resolution/Focus mode 0.01 inchHg AP-43: Standard mode 0.01 kgf/cm², High-resolution/Focus mode 0.02 Psi
Power consumption	Normal	12 V: 720 mW (60 mA) max., 24 V: 960 mW (40 mA) max.
	Eco mode	12 V: 480 mW (40 mA) max., 24 V: 720 mW (30 mA) max.
Display temperature characteristic		±1 % of F.S. max.
Hysteresis		Variable (Standard: 0.5 % of FS; high-resolution/focus mode: 0.1 % of F.S.)
Response time (Chattering prevention function)		1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable)
I/O	Analog output	-
	Zero-shift input	Input time: 2 ms or more. (or analog output selectable)
	Control output	PNP open collector 20 mA max. (at 30 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Polycarbonate
Accessories		End Unit，Head Connector, and Expansion seal
Weight		Approx. 80 g (with 2-m 6.6' cable)
^*1 The focus range applies while in focus mode only.

Keyence AP-V42W Keyence

€0,00

Sold Out

Specifications

Model		AP-V42W
Type		Amplifier Unit, NPN
Applicable sensor head		AP-41M, AP-41, AP-43, AP-44
Display		4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18"), AI indicator (green) Display cycle: 10 times/s
Operation indicator		Red LED × 2 (corresponding to control output 1 and control output 2)
Display resolution		AP-41M/41/44: Standard mode 0.1 inchHg, High-resolution/Focus mode 0.01 inchHg AP-43: Standard mode 0.01 kgf/cm², High-resolution/Focus mode 0.02 Psi
Power consumption	Normal	12 V: 720 mW (60 mA) max., 24 V: 960 mW (40 mA) max.
	Eco mode	12 V: 480 mW (40 mA) max., 24 V: 720 mW (30 mA) max.
Display temperature characteristic		±1 % of F.S. or less
Hysteresis		Standard mode: 0.5 % of F.S., high-resolution mode: 0.1 % of F.S., hysteresis variable mode (F-2): variable
Response time (Chattering prevention function)		1/2.5/5/100/500 ms (selectable; 1 ms is used when high-speed mode is selected)
I/O	Zero-shift input	Input time: 2 ms or more (switchable with analog output)
	Control output	Maximum NPN open-collector output: 20 mA (40 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Polycarbonate
Accessories		End unit, head connection connector, extension warnings sticker
Weight		Approx. 80 g (with 2 m cable)

Keyence AP-V42WP Keyence

€778,95

Only 3 units left

Specifications

Model		AP-V42WP
Type		Amplifier Unit, PNP
Applicable sensor head		AP-41M, AP-41, AP-43, AP-44
Display		4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18"), AI indicator (green) Display cycle: 10 times/s
Operation indicator		Red LED × 2 (corresponding to control output 1 and control output 2)
Display resolution		AP-41M/41/44: Standard mode 0.1 inchHg, High-resolution/Focus mode 0.01 inchHg AP-43: Standard mode 0.01 kgf/cm², High-resolution/Focus mode 0.02 Psi
Power consumption	Normal	12 V: 840 mW (70 mA) max., 24 V: 1,200 mW (50 mA) max.
	Eco mode	12 V: 600 mW (50 mA) max., 24 V: 960 mW (40 mA) max.
Display temperature characteristic		±1 % of F.S. or less
Hysteresis		Standard mode: 0.5 % of F.S., high-resolution mode: 0.1 % of F.S., hysteresis variable mode (F-2): variable
Response time (Chattering prevention function)		1/2.5/5/100/500 ms (selectable; 1 ms is used when high-speed mode is selected)
I/O	Zero-shift input	Input time: 2 ms or more (switchable with analog output)
	Control output	Maximum PNP open-collector output: 20 mA (30 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Polycarbonate
Accessories		End unit, head connection connector, extension warnings sticker
Weight		Approx. 80 g (with 2 m cable)

Keyence AP-V80 Keyence

€671,95

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AP-V80P Keyence

€464,95

Only 5 units left

Buy the Keyence AP-V80P - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence AP-V80P is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence AP-V80W Keyence

€925,95

Only 6 units left

Specifications

Model		AP-V80W
Type		Standard (DIN), NPN
Display		2-level display with 4 1/2-digit, 7-segment LED (Character height: Upper level: 8 mm 0.32", red, Lower level: 5.7 mm 0.22", green) Alarm indicator: Red LED
Operation indicator		Red LED x 3 (corresponding to control output 1 and 2)
Display resolution		AP-10SK/AP-11SK: Standard mode 0.1inchHg, High-resolution mode 0.01inchHg AP-12SK:Standard mode/0.01PSI, High-resolution mode/0.001PSI AP-13SK:Standard mode/0.1PSI, High-resolution mode/0.01PSI AP-14SK:Standard mode/1PSI, High-resolution mode/0.1PSI AP-15SK/AP-16SK:Standard mode/10PSI, High-resolution mode/1PSI
Power consumption	Normal	12V:1380mW(115mA) or less 24V:1920mW(80mA) or less^*1
	Eco mode	12V:1020mW(85mA) or less 24V:1200mW(50mA) or less^*1
Hysteresis		Variable (Standard: 0.5% of FS; high-resolution: 0.1% of F.S.)
Response time (Chattering prevention function)		Selectable from 5, 10, 100, 500 and 1000 seconds
I/O	Analog output	4 to 20 mA, Maximum load resistance: 260Ω .
	Zero-shift input	Input time of 20 ms or more. (or analog output selectable)
	Bank input
	Control output	NPN (PNP) open collector x 2 channels (N.O./N.C. selectable), 40 VDC (30 VDC) max., 100 mA max. with residual voltage of 1 V max.
Rating	Power voltage	12 to 24 VDC Ripple (P-P) 10% or less
Environmental resistance	Ambient temperature	-10 to +50°C (14 to 122°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively
Material		Housing and cover: Polycarbonate, Keytop: Elastomer
Accessories		AP-V80W (P) / V82W (P): DIN-rail mounting bracket, power cable, unit stickers
Weight		Approx. 85 g
^*1 Excluding the current for analog output Including the current for the sensor head

Keyence AP-V80WP Keyence

€952,95

Only 7 units left

Specifications

Model		AP-V80WP
Type		Standard (DIN), PNP
Display		2-level display with 4 1/2-digit, 7-segment LED (Character height: Upper level: 8 mm 0.32", red, Lower level: 5.7 mm 0.22", green) Alarm indicator: Red LED
Operation indicator		Red LED x 3 (corresponding to control output 1 and 2)
Display resolution		AP-10SK/AP-11SK: Standard mode 0.1inchHg, High-resolution mode 0.01inchHg AP-12SK:Standard mode/0.01PSI, High-resolution mode/0.001PSI AP-13SK:Standard mode/0.1PSI, High-resolution mode/0.01PSI AP-14SK:Standard mode/1PSI, High-resolution mode/0.1PSI AP-15SK/AP-16SK:Standard mode/10PSI, High-resolution mode/1PSI
Power consumption	Normal	12V:1380mW(115mA) or less 24V:1920mW(80mA) or less^*1
	Eco mode	12V:1020mW(85mA) or less 24V:1200mW(50mA) or less^*1
Hysteresis		Variable (Standard: 0.5% of FS; high-resolution: 0.1% of F.S.)
Response time (Chattering prevention function)		Selectable from 5, 10, 100, 500 and 1000 seconds
I/O	Analog output	4 to 20 mA, Maximum load resistance: 260Ω .
	Zero-shift input	Input time of 20 ms or more. (or analog output selectable)
	Bank input
	Control output	NPN (PNP) open collector x 2 channels (N.O./N.C. selectable), 40 VDC (30 VDC) max., 100 mA max. with residual voltage of 1 V max.
Rating	Power voltage	12 to 24 VDC Ripple (P-P) 10% or less
Environmental resistance	Ambient temperature	-10 to +50°C (14 to 122°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively
Material		Housing and cover: Polycarbonate, Keytop: Elastomer
Accessories		AP-V80W (P) / V82W (P): DIN-rail mounting bracket, power cable, unit stickers
Weight		Approx. 85 g
^*1 Excluding the current for analog output Including the current for the sensor head

Keyence AP-V82 Keyence

€324,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AP-V82W Keyence

€0,00

Sold Out

Specifications

Model		AP-V82W
Type		Differential pressure type (DIN), NPN
Display		2-level display with 4 1/2-digit, 7-segment LED (Character height: Upper level: 8 mm 0.32", red, Lower level: 5.7 mm 0.22", green) Alarm indicator: Red LED
Operation indicator		Red LED x 3 (corresponding to control output 1 and 2)
Display resolution		AP-10SK/AP-11SK: Standard mode 0.1inchHg, High-resolution mode 0.01inchHg AP-12SK:Standard mode/0.01PSI, High-resolution mode/0.001PSI AP-13SK:Standard mode/0.1PSI, High-resolution mode/0.01PSI AP-14SK:Standard mode/1PSI, High-resolution mode/0.1PSI AP-15SK/AP-16SK:Standard mode/10PSI, High-resolution mode/1PSI
Power consumption	Normal	12V:1680mW(140mA) or less 24V:2520mW(105mA) or less^*1
	Eco mode	12V:1200mW(100mA) or less 24V:2160mW(90mA) or less^*1
Hysteresis		Variable (Standard: 0.5% of FS; high-resolution: 0.1% of F.S.)
Response time (Chattering prevention function)		Selectable from 10, 100, 500 and 1000 ms
I/O	Analog output	4 to 20 mA, Maximum load resistance: 260Ω .
	Zero-shift input	Input time of 20 ms or more. (or analog output selectable)
	Bank input
	Control output	NPN (PNP) open collector x 2 channels (N.O./N.C. selectable), 40 VDC (30 VDC) max., 100 mA max. with residual voltage of 1 V max.
Rating	Power voltage	12 to 24 VDC Ripple (P-P) 10% or less
Environmental resistance	Ambient temperature	-10 to +50°C (14 to 122°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively
Material		Housing and cover: Polycarbonate, Keytop: Elastomer
Accessories		AP-V80W (P) / V82W (P): DIN-rail mounting bracket, power cable, unit stickers
Weight		Approx. 90 g
^*1 Excluding the current for analog output Including the current for the sensor head

Keyence AP-V82WP Keyence

€0,00

Sold Out

Specifications

Model		AP-V82WP
Type		Differential pressure type (DIN), PNP
Display		2-level display with 4 1/2-digit, 7-segment LED (Character height: Upper level: 8 mm 0.32", red, Lower level: 5.7 mm 0.22", green) Alarm indicator: Red LED
Operation indicator		Red LED x 3 (corresponding to control output 1 and 2)
Display resolution		AP-10SK/AP-11SK: Standard mode 0.1inchHg, High-resolution mode 0.01inchHg AP-12SK:Standard mode/0.01PSI, High-resolution mode/0.001PSI AP-13SK:Standard mode/0.1PSI, High-resolution mode/0.01PSI AP-14SK:Standard mode/1PSI, High-resolution mode/0.1PSI AP-15SK/AP-16SK:Standard mode/10PSI, High-resolution mode/1PSI
Power consumption	Normal	12V:1680mW(140mA) or less 24V:2520mW(105mA) or less^*1
	Eco mode	12V:1200mW(100mA) or less 24V:2160mW(90mA) or less^*1
Hysteresis		Variable (Standard: 0.5% of FS; high-resolution: 0.1% of F.S.)
Response time (Chattering prevention function)		Selectable from 10, 100, 500 and 1000 ms
I/O	Analog output	4 to 20 mA, Maximum load resistance: 260Ω .
	Zero-shift input	Input time of 20 ms or more. (or analog output selectable)
	Bank input
	Control output	NPN (PNP) open collector x 2 channels (N.O./N.C. selectable), 40 VDC (30 VDC) max., 100 mA max. with residual voltage of 1 V max.
Rating	Power voltage	12 to 24 VDC Ripple (P-P) 10% or less
Environmental resistance	Ambient temperature	-10 to +50°C (14 to 122°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively
Material		Housing and cover: Polycarbonate, Keytop: Elastomer
Accessories		AP-V80W (P) / V82W (P): DIN-rail mounting bracket, power cable, unit stickers
Weight		Approx. 90 g
^*1 Excluding the current for analog output Including the current for the sensor head

Keyence AP-V85 Keyence

€484,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AP-V85P Keyence

€419,95

Only 5 units left

Buy the Keyence AP-V85P - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence AP-V85P is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence AP-V85W Keyence

€525,95

Only 5 units left

Specifications

Model		AP-V85W
Type		Standard (Panel), NPN
Display		2-level display with 4 1/2-digit, 7-segment LED (Character height: Upper level: 8 mm 0.32", red, Lower level: 5.7 mm 0.22", green) Alarm indicator: Red LED
Operation indicator		Red LED x 3 (corresponding to control output 1 and 2)
Display resolution		AP-10SK/AP-11SK: Standard mode 0.1inchHg, High-resolution mode 0.01inchHg AP-12SK:Standard mode/0.01PSI, High-resolution mode/0.001PSI AP-13SK:Standard mode/0.1PSI, High-resolution mode/0.01PSI AP-14SK:Standard mode/1PSI, High-resolution mode/0.1PSI AP-15SK/AP-16SK:Standard mode/10PSI, High-resolution mode/1PSI
Power consumption	Normal	12V:1380mW(115mA) or less 24V:1920mW(80mA) or less^*1
	Eco mode	12V:1020mW(85mA) or less 24V:1200mW(50mA) or less^*1
Hysteresis		Variable (Standard: 0.5% of FS; high-resolution: 0.1% of F.S.)
Response time (Chattering prevention function)		Selectable from 5, 10, 100, 500 and 1000 seconds
I/O	Analog output	4 to 20 mA, Maximum load resistance: 260Ω .
	Zero-shift input	Input time of 20 ms or more. (or analog output selectable)
	Bank input
	Control output	NPN (PNP) open collector x 2 channels (N.O./N.C. selectable), 40 VDC (30 VDC) max., 100 mA max. with residual voltage of 1 V max.
Rating	Power voltage	12 to 24 VDC Ripple (P-P) 10% or less
Environmental resistance	Ambient temperature	-10 to +50°C (14 to 122°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively
Material		Housing and cover: Polycarbonate, Keytop: Elastomer
Accessories		AP-V85W (P) / V87W (P): Panel mounting bracket, protective cover
Weight		Approx. 85 g
^*1 Excluding the current for analog output Including the current for the sensor head

Keyence AP-V85WP Keyence

€0,00

Sold Out

Specifications

Model		AP-V85WP
Type		Standard (Panel), PNP
Display		2-level display with 4 1/2-digit, 7-segment LED (Character height: Upper level: 8 mm 0.32", red, Lower level: 5.7 mm 0.22", green) Alarm indicator: Red LED
Operation indicator		Red LED x 3 (corresponding to control output 1 and 2)
Display resolution		AP-10SK/AP-11SK: Standard mode 0.1inchHg, High-resolution mode 0.01inchHg AP-12SK:Standard mode/0.01PSI, High-resolution mode/0.001PSI AP-13SK:Standard mode/0.1PSI, High-resolution mode/0.01PSI AP-14SK:Standard mode/1PSI, High-resolution mode/0.1PSI AP-15SK/AP-16SK:Standard mode/10PSI, High-resolution mode/1PSI
Power consumption	Normal	12V:1380mW(115mA) or less 24V:1920mW(80mA) or less^*1
	Eco mode	12V:1020mW(85mA) or less 24V:1200mW(50mA) or less^*1
Hysteresis		Variable (Standard: 0.5% of FS; high-resolution: 0.1% of F.S.)
Response time (Chattering prevention function)		Selectable from 5, 10, 100, 500 and 1000 seconds
I/O	Analog output	4 to 20 mA, Maximum load resistance: 260Ω .
	Zero-shift input	Input time of 20 ms or more. (or analog output selectable)
	Bank input
	Control output	NPN (PNP) open collector x 2 channels (N.O./N.C. selectable), 40 VDC (30 VDC) max., 100 mA max. with residual voltage of 1 V max.
Rating	Power voltage	12 to 24 VDC Ripple (P-P) 10% or less
Environmental resistance	Ambient temperature	-10 to +50°C (14 to 122°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively
Material		Housing and cover: Polycarbonate, Keytop: Elastomer
Accessories		AP-V85W (P) / V87W (P): Panel mounting bracket, protective cover
Weight		Approx. 85 g
^*1 Excluding the current for analog output Including the current for the sensor head

Keyence AP-V87W Keyence

€0,00

Sold Out

Specifications

Model		AP-V87W
Type		Differential pressure type (Panel), NPN
Display		2-level display with 4 1/2-digit, 7-segment LED (Character height: Upper level: 8 mm 0.32", red, Lower level: 5.7 mm 0.22", green) Alarm indicator: Red LED
Operation indicator		Red LED x 3 (corresponding to control output 1 and 2)
Display resolution		AP-10SK/AP-11SK: Standard mode 0.1inchHg, High-resolution mode 0.01inchHg AP-12SK:Standard mode/0.01PSI, High-resolution mode/0.001PSI AP-13SK:Standard mode/0.1PSI, High-resolution mode/0.01PSI AP-14SK:Standard mode/1PSI, High-resolution mode/0.1PSI AP-15SK/AP-16SK:Standard mode/10PSI, High-resolution mode/1PSI
Power consumption	Normal	12V:1680mW(140mA) or less 24V:2520mW(105mA) or less^*1
	Eco mode	12V:1200mW(100mA) or less 24V:2160mW(90mA) or less^*1
Hysteresis		Variable (Standard: 0.5% of FS; high-resolution: 0.1% of F.S.)
Response time (Chattering prevention function)		Selectable from 10, 100, 500 and 1000 ms
I/O	Analog output	4 to 20 mA, Maximum load resistance: 260Ω .
	Zero-shift input	Input time of 20 ms or more. (or analog output selectable)
	Bank input
	Control output	NPN (PNP) open collector x 2 channels (N.O./N.C. selectable), 40 VDC (30 VDC) max., 100 mA max. with residual voltage of 1 V max.
Rating	Power voltage	12 to 24 VDC Ripple (P-P) 10% or less
Environmental resistance	Ambient temperature	-10 to +50°C (14 to 122°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively
Material		Housing and cover: Polycarbonate, Keytop: Elastomer
Accessories		AP-V85W (P) / V87W (P): Panel mounting bracket, protective cover
Weight		Approx. 90 g
^*1 Excluding the current for analog output Including the current for the sensor head

Keyence AP-V87WP Keyence

€0,00

Sold Out

Specifications

Model		AP-V87WP
Type		Differential pressure type (Panel), PNP
Display		2-level display with 4 1/2-digit, 7-segment LED (Character height: Upper level: 8 mm 0.32", red, Lower level: 5.7 mm 0.22", green) Alarm indicator: Red LED
Operation indicator		Red LED x 3 (corresponding to control output 1 and 2)
Display resolution		AP-10SK/AP-11SK: Standard mode 0.1inchHg, High-resolution mode 0.01inchHg AP-12SK:Standard mode/0.01PSI, High-resolution mode/0.001PSI AP-13SK:Standard mode/0.1PSI, High-resolution mode/0.01PSI AP-14SK:Standard mode/1PSI, High-resolution mode/0.1PSI AP-15SK/AP-16SK:Standard mode/10PSI, High-resolution mode/1PSI
Power consumption	Normal	12V:1680mW(140mA) or less 24V:2520mW(105mA) or less^*1
	Eco mode	12V:1200mW(100mA) or less 24V:2160mW(90mA) or less^*1
Hysteresis		Variable (Standard: 0.5% of FS; high-resolution: 0.1% of F.S.)
Response time (Chattering prevention function)		Selectable from 10, 100, 500 and 1000 ms
I/O	Analog output	4 to 20 mA, Maximum load resistance: 260Ω .
	Zero-shift input	Input time of 20 ms or more. (or analog output selectable)
	Bank input
	Control output	NPN (PNP) open collector x 2 channels (N.O./N.C. selectable), 40 VDC (30 VDC) max., 100 mA max. with residual voltage of 1 V max.
Rating	Power voltage	12 to 24 VDC Ripple (P-P) 10% or less
Environmental resistance	Ambient temperature	-10 to +50°C (14 to 122°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively
Material		Housing and cover: Polycarbonate, Keytop: Elastomer
Accessories		AP-V85W (P) / V87W (P): Panel mounting bracket, protective cover
Weight		Approx. 90 g
^*1 Excluding the current for analog output Including the current for the sensor head

Keyence AP14SK Keyence

€946,95

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AS-421B Keyence

€525,95

Only 1 unit left

Specifications

Model			AS-421B
Type			Amplifier
Sensor head			AH-305
Shape			―
Measuring range			0 to 1.0 mm 0.04"
Analog output voltage	Output voltage		0.2 to 0.6V
	Straight line range		0.2 to 0.6mm 0.008" to 0.024"
	Impedance		100 Ω
	Resolution		0.2% of F.S.
	Linearity		±2.0% of F.S.
	Response		3.3 kHz (-3 dB)
Temperature fluctuation	Sensor head		0.06% of F.S./°C^*1
Temperature characteristics	Amplifier unit		0.1% of F.S./°C^*1
Rating	Power voltage		110/120/220/240 VAC ±10 %, 50/60 Hz
	Power consumption		6VA
Environmentalresistance	Enclosure rating	Sensor head	―
	Operating ambient temperature		-10 to +60°C 14 to 140°F
		Amplifier unit	0 to +50°C 32 to 122°F
Environmental resistance	Relative humidity		35 to 85 % RH (No condensation)
Weight	Sensor head		―
Weight (including cord)	Amplifier unit
^*1 When the distance between the sensor head and the target is within 50% of the measurement range.

Keyence AS-421F Keyence

€810,95

Only 1 unit left

Specifications

Model			AS-421F
Type			Amplifier
Sensor head			AH-416
Shape			―
Measuring range			0 to 6.0mm 0.24"
Analog output voltage	Output voltage		0.8 to 2.5V
	Straight line range		0.8 to 2.5mm 0.031" to 0.098"
	Impedance		100 Ω
	Resolution		0.2% of F.S.
	Linearity		±2.0% of F.S.
	Response		3.3 kHz (-3 dB)
Temperature fluctuation	Sensor head		0.06% of F.S./°C^*1
Temperature characteristics	Amplifier unit		0.1% of F.S./°C^*1
Rating	Power voltage		110/120/220/240 VAC ±10 %, 50/60 Hz
	Power consumption		6VA
Environmentalresistance	Enclosure rating	Sensor head	―
	Operating ambient temperature		-10 to +60°C 14 to 140°F
		Amplifier unit	0 to +50°C 32 to 122°F
Environmental resistance	Relative humidity		35 to 85 % RH (No condensation)
Weight	Sensor head		―
Weight (including cord)	Amplifier unit
^*1 When the distance between the sensor head and the target is within 50% of the measurement range.

Keyence AS-421G Keyence

€328,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AS-425K Keyence

€525,95

Only 1 unit left

Specifications

Model			AS-425K
Type			Amplifier unit for high temperatures
Sensor head			AH-809
Shape			Cylindrical, diameter: 9.4
Measuring range			0.5 to 1.0 mm0.02" to 0.039"
Analog output voltage	Output voltage		0.5 to 1.0V
	Straight line range		―
	Impedance		100 Ω
	Resolution		0.4% of F.S.^*1
	Linearity		±4% of F.S.
	Response		3.3kHz (-3dB)
Temperature fluctuation	Sensor head		0.14% of F.S./°C^*2
Temperature characteristics	Amplifier unit		0.1% of F.S./°C^*2
Rating	Power voltage		115/230 VAC ±15 %, 50/60 Hz
	Power consumption		6VA
Environmentalresistance	Enclosure rating	Sensor head	Heat-resistant type^*3
	Operating ambient temperature		-10 to 200°C 14 to 392°F, No condensation
		Amplifier unit	0 to +50°C 32 to 122°F
Environmental resistance	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight	Sensor head		Approx 55 g (including cable)
Weight (including cord)	Amplifier unit		Approx 180 g (including the cable)
^1 The AS-425K full scale is 0.5 to 1.0 mm (0.5 mm) 0.0197" to 0.0394"(0.0197"). The temperature characteristics refer to data when the temperature is in the range of +23 to +200°C +73.4 to +392°F. ^2 When the distance between the sensor head and the target is within 50% of the measurement range. ^*3 The AH-809 is not constructed to be waterproof, so avoid using this product in an environment in which the product will be directly subjected to liquids or steam.

Keyence AS-440-01 Keyence

€1.524,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AS-440-01U Keyence

€0,00

Sold Out

Specifications

Model			AS-440-01U
Type			General-use amplifier unit
Sensor head			AH-305
Shape			Cylindrical, diameter: 5.4
Measuring range			0 to 1 mm 0.04"
Analog output voltage	Output voltage		0 to 1V
	Impedance		100 Ω
	Resolution		0.1% of F.S.
	Linearity		±1% of F.S.
	Response		3.3 kHz (-3 dB)
Temperature fluctuation	Sensor head		0.03% of F.S./°C^*1
Temperature characteristics	Amplifier unit		0.05% of F.S./°C^*1
Rating	Power voltage		110/120/220/240 VAC ±10 %, 50/60 Hz
	Power consumption		5VA
Environmentalresistance	Enclosure rating	Sensor head	IP67
	Operating ambient temperature		-10 to +60°C 14 to 140°F, No freezing
		Amplifier unit	0 to +50°C 32 to 122°F
Environmental resistance	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight	Sensor head		Approx 45 g
Weight (including cord)	Amplifier unit		Approx 320g
^*1 When the distance between the sensor head and the target is within 50% of the measurement range.