Machine Vision Systems

€530,95

Only 1 unit left

Specifications

Model				GS-P12C10
Type				Standard/High performance type (12-pin)
Length				10 m 32.81'
Weight				Approx. 480 g

Keyence SJ-M071G Keyence

€279,95

Only 1 unit left

Specifications

Model		SJ-M071G
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Air purge supplied pressure		0.2 MPa or less
Effective length		324 mm 12.756"^*2
Total length		380 mm 14.961"^*3
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 65 % RH (No condensation)
Weight		Approx. 720 g
^1 Operating distance: 50 mm 1.96" (50 Hz), 600 mm 23.62" (8 Hz), 1,500 mm 59.05" (1 Hz). Downward air flow: 0.3 m/s. Air purge (3 NL/min) /1electrode ^2 Elective length indicates the static elimination rangeat 50 mm operating distance. ^*3 The overall length includes mounting brackets.

Keyence NR-XHA08T Keyence

€2.154,95

Only 1 unit left

Specifications

Model		NR-XHA08T
Input method		Insulated single-end input, channels insulated from each other, input channels insulated from the case and other units (system)
Number of input channels		8^*1
Input connector type		Dedicated 3-pin connector
Measurement cycle		Maximum sampling cycle: 100 μs (10 kHz) to 60 s
A/D converting system		Delta-sigma method
A/D resolution		24 bits
A/D integration time (noise filter)		AUTO (Automatic configuration according to sampling cycle), 25 μs (40 kHz), 208 μs (4.8 kHz), 2.5 ms (400 Hz), 16.7 ms (60 Hz), 20 ms (50 Hz), 100 ms (10 Hz)
Input frequency band		2 kHz (−3 dB or more)
Input type		Voltage input: ±60 V, ±20 V, ±10 V, ±5 V, ±2 V, ±1 V, ±500 mV, ±200 mV, ±100 mV Current input: ±20 mA
Averaging		Switchable between ON/OFF, Averaging rate: 2 to 128 (moving average)
Input impedance	Voltage input ±2 V range or higher	1 MΩ ±2%
	Voltage input ±1 V range or higher	10 MΩ ±2%
	Current input	Approx. 100 Ω
Measurement range	±60 V	Measurable range: −60.000 to +60.000 V Measurement accuracy: ±0.05% of rdg ±8 mV ^*2 Display resolution: 2 mV
	±20 V	Measurable range: −22.000 to +22.000 V Measurement accuracy: ±0.05% of rdg ±4 mV ^*2 Display resolution: 1 mV
	±10 V	Measurable range: −11.000 to +11.000 V Measurement accuracy: ±0.05% of rdg ±2 mV ^*2 Display resolution: 0.5 mV
	±5 V	Measurable range: −5.5000 to +5.5000 V Measurement accuracy: ±0.05% of rdg ±0.8 mV ^*2 Display resolution: 0.2 mV
	±2 V	Measurable range: −2.2000 to +2.2000 V Measurement accuracy: ±0.05% of rdg ±0.4 mV ^*2 Display resolution: 0.1 mV
	±1 V	Measurable range: −1.1000 to +1.1000 V Measurement accuracy: ±0.05% of rdg ±0.2 mV ^*2 Display resolution: 0.05 mV
	±500 mV	Measurable range: −550.00 to +550.00 mV Measurement accuracy: ±0.05% of rdg ±0.08 mV ^*2 Display resolution: 0.02 mV
	±200 mV	Measurable range: −220.00 to +220.00 mV Measurement accuracy: ±0.05% of rdg ±0.04 mV ^*2 Display resolution: 0.01 mV
	±100 mV	Measurable range: −110.000 to +110.000 mV Measurement accuracy: ±0.05% of rdg ±0.02 mV ^*2 Display resolution: 0.005 mV
	±20 mA	Measurable range: −22.000 to +22.000 mA Measurement accuracy: ±0.08% of rdg ±0.004 mA ^*2 Display resolution: 0.001 mA
Maximum input rating		Voltage input: ±60 V, Current input: ±30 mA
Maximum allowable input ground voltage		120 VAC and 170 Vpeak, or 120 VDC (when using NR-XHA08T protective grounding) The following applies when not using NR-XHA08T protective grounding. Dry locations: 30 VAC and 42.4 Vpeak, or 60 VDC Wet locations: 16 VAC and 22.6 Vpeak, or 35 VDC
Withstand voltage		Between measurement input terminal and case/other units (system): 1000 VAC (50 Hz / 60 Hz) for 1 minute Between measurement input terminals: 1000 VAC (50 Hz / 60 Hz) for 1 minute
Buffer memory		16M data^*3
Warm up time		30 minutes or more
Residual noise level		0.005% of F.S. (typ.) when A/D integration time is set to 20 ms (50 Hz) / 16.7 ms (60 Hz) 0.05% of F.S. (typ.) when A/D integration time is set to 208 μs (4.8 kHz) ^*2
Common mode noise reduction ratio		105 dB or more (up to 60 Hz DC) (typ.)^*2
Remote connection		Dedicated environment-resistant remote unit input port × 1 (Remote IN), Output port × 1 (Remote OUT) Connection to NR-X100W master data collection unit or other NR-XR01 remote units using environment-resistant unit cable Connectable to multiple environment-resistant measurement units^*4
Synchronization accuracy between remote connection units		±1 μs^*5
Power supply		Supplied from NR-X100W master unit
Power consumption		5.8 W or less
Surrounding air temperature		−40 to +85°C -40°F to +185°F^*6
Operating ambient humidity		Max. 100% RH^*7
Vibration resistance		100 m/s² 328.1 ft/s²; 5 to 2000 Hz; 2 hours in each of the X, Y, and Z directions (IEC 60068-2-6)^*8 Equivalent to JIS D1601 Stage 45 (Class 1, Class 2, and Class 3; equivalent to Class B) automotive vibration standard
Shock resistance		1000 m/s² 3280.8 ft/s²; 3 times in each of the X, Y, and Z directions (18 times in total) (IEC 60068-2-27)
Enclosure rating		IP65/IP67 (IEC 60529) Enclosure Type 4X (UL 50E, CSA C22.2 No. 94.2, NEMA 250) Indoor/outdoor use
Material		Main unit case: Aluminum die-casting (coated), Display: Reinforced glass, Connectors: Brass (chromate processing), Connector protection cap: PBT+PC
Weight		Approx. 690 g 24.36 oz
^1 Max. expansion: 64 ch (with 8 units connected, using NR-X100W) ^2 Specified with an A/D integration time of 20 ms (50 Hz) / 16.7 ms (60 Hz), averaging set to 2 times, and after the warm-up time has passed and the temperature has stabilized (23°C ±3°C 73.4°F ±5.4°F). ^3 The buffer memory that can be used by the entire system is limited by the NR-X100W buffer memory. ^4 Environment-resistant unit cables can be extended by connecting an environment-resistant unit extension cable. The total length of cables used in the system should be no more than 100 m 32.8'. The distance between the NR-X100W (or NR-XR01) and environment-resistant measurement units or between environment-resistant remote measurement units should be no more than 60 m 196.9'. ^5 The sampling cycle and timing vary depending on the various measurement units used in the system. ^6 Install the product on the specified mounting sheet metal (OP-88613) for use with ambient temperatures of 80°C 176°F or higher. ^7 Use the product under the condition that the absolute humidity is 85°C 185°F with 90% RH or less. Avoid sudden temperature and humidity changes to prevent significant condensation and freezing. ^8 Testing with a 50 mm 1.97" p-p displacement limit used for 5 to 10 Hz.

Keyence FU-95H Keyence

€0,00

Sold Out

Specifications

Model		FU-95H
Type		Liquid-level detection fiber unit
Mounting transparent tube diameter		4 to 26 mm0.157" to 1.024"^*1
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.0×2
Minimum bend radius		R10 mm0.394"
Environmental resistance	Ambient temperature	-40 to +105 °C -40 to 221 °F
Accessories		Binding band × 2, nonslip rubber × 2, spacer × 2, screw × 2, nut × 2
Weight		Approx. 22 g
^1 When the FS-V* Series is used. We recommend a pipe thickness of 1 mm.

Keyence SJ-L005F Keyence

€693,95

Only 6 units left

Specifications

Model		SJ-L005F
Voltage application method		High frequency AC method
Applied voltage		3 kVAC
Ion balance		±10 V ^*1
Installation distance		50 mm 1.97 " or greater
Maximum air speed		7 m/s ^*1
Maximum air flow		0.16 m³/min
Ozone concentration		0.05 ppm or less ^*1
Control input	Static elimination stop input	Can switch between “non-voltage input” and “voltage input” ^2^3 For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) For voltage input: Maximum input rating 30 V , ON voltage 18 V or higher, OFF current 0.1 mA or lower, ON current 1 mA or lower (at 30 V)
Control output	Alarm (N.C.) /Ion level alarm (N.O.)	Open collector output: 30 V DC or less Maximum 50 mA or lower, Residual voltage 1 V or lower Switchable between NPN/PNP settings ^2^3
Power supply	Power voltage	24 V DC ±10 % (including ripple) or 12 V DC (dedicated AC adapter OP-88020/87722 ^*4)
	Power consumption	310 mA or less (for 24 V DC) 600 mA or less (for 12 V DC)
Environmental resistance	Ambient temperature	0 to +50 °C 32 to +122 °F (When using OP-87722, 0 to +40 °C 32 to +104 °F)
	Relative humidity	35 to 65 % RH (assuming no condensation)
	Overvoltage category	I
	Pollution degree	2
Weight		Approx. 100 g (main unit weight)
^1 Measurement results taken with an installation distance of 100 mm 3.94 " , maximum air flow and no air filter. (Representative values) ^2 Cannot be used when the power supply is an AC adapter ^3 “Static elimination stop input” and “ion level alarm output” are allocated to the white line using the setting switch. ^4 Rated input of 100 to 240 V AC , 50/60 Hz

Keyence OP-89197 Keyence

€0,00

Sold Out

Specifications

Model				OP-89197
Type				M18 straight bracket
Material				SUS304
Weight				Approx. 45 g 1.59 oz

Keyence OP-42192 Keyence

€0,00

Sold Out

Specifications

Model				OP-42192
Overview				AP30/40 panel mounting bracket (Compatible with 5mm thick panel)
Applicable product				AP-30, AP-40
Material				Polyacetal
Note				Incompatible with AP-C.

Keyence WM-H3C2 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GH-613 Keyence

€564,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ES-12AC-U Keyence

€302,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-B010AS Keyence

€646,95

Only 4 units left

Specifications

Model				SV2-B010AS
General specifications	Applicable servo amplifier			SV2-010L2
	Rated output			100 W
	Rated torque			0.318 N·m ^*1
	Instant maximum torque			1.11 N·m
	Rated current			0.85 Arms
	Instant maximum current			3.1 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.413 N·m/Arms
	Rotor moment of inertia			0.0739 ×10^-4kg·m²
	Rated power rating			15.3 kW/s
	Rated angle acceleration			48200 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			35 ×
	Approx. weight			0.7 kg
Electromagnetic brake specifications	Capacity			5.5 W
	Rated voltage			24 VDC ±10%
	Rated current (@20°C 68°F)			0.23 A
	Holding torque			0.318 N·m
	Release time			60 ms ^*2
	Operating time			100 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.

Keyence OP-25218 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CZ-V22P Keyence

€807,95

Only 2 units left

Specifications

Model		CZ-V22P
Output		PNP output
Main unit/expansion unit		Expansionunit (with outputcable)
Response time		8 ms (SUPER) /4 ms (TURBO) /1 ms (FINE) /200 µs (HIGH SPEED)
Control output		PNP open-collector x 4 channels, 30 VDC max., Up to 100 mA for one output, Up to 200 mA in total of 4 outputs, Residual voltage: 1.0 V max.^*1
Protection circuit		Reverse-polarity protection, overcurrent protection, surge absorber
External calibration input		No-voltage input, input time: 20 ms or more
External shift input
Timer function		Timer OFF/OFF-delay/ON-delay/One-shot, Timer time: 1 to 1000 ms adjustable (for each bank respectively)
Unit expansion		Up to 3 units (4 units total including the main unit)^*2
Rating	Power voltage	24 VDC, Ripple (P-P) 10 % or less
	Power consumption	Normal mode: 1.5 W (62.5 mA or less), Eco-mode: 1 W (42.0 mA or less)
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)^*3
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Housing, cover: Polycarbonate
Weight		Approx. 100 g
^1 20 mA max. when several units are connected. ^2 The FS-V20 Series expansion unit cannot be connected to the CZ-V20 Series main unit. When using a combination of expansion units, connect the CZ-V20 Series expansion unit to the FS-V20 Series main unit. Also, if using multiple expansion units, make sure to connect the CZ-V20 Series to right side of the FS-V20 Series. ^*3 When several units are connected, the acceptable ambient temperature varies depending on the conditions given below. To connect several units, be sure to mount them to a DIN rail and to limit the output current to a maximum of 20 mA. When 1 or 2 units are connected: -10 to +50 °C 14 to 122 °F When 3 units are connected: -10 to +45 °C 14 to 113 °F

Keyence XG-7000 Keyence

€1.267,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence EH-440 Keyence

€383,95

In stock, 35 units

Specifications

Model		EH-440
Type		Standard , Non-shielded , Cylindrical and threaded
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		40 x 40 mm1.57"
Stable detecting range		0 to 18 mm0.71"
Maximum detecting distance		36 mm1.42"
Hysteresis		0.1 mm0.004"
Repeatability		0.037 mm0.001"
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -10 to +60°C 14 to 140°F
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 280 g (including nuts and 3-m 9.8' cable)

Keyence CA-LHS8 Keyence

€0,00

Sold Out

Specifications

Model				CA-LHS8
Type				High-resolution lens
Overview				Specialised lens for the compact camera (ø17 ø0.67").

Keyence FS-N11P Keyence

€132,95

In stock, 24 units

Specifications

Model		FS-N11P
Type		Standard 1 output Cable
Output		PNP
Main unit/expansion unit		Main unit
Control output		1 PNP open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less
External input		-
Light source LED		Red, 4-element LED
APC		ON/OFF switchable (Factory setting: OFF)
Response time		50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Number of interference prevention units		0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)
Unit expansion		Up to 16 units can be connected total (two output type is treated as two units)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current Consumption	Normal: 950 mW or less (39 mA max. at 24 V, 52 mA max. at 12 V)^1 Eco on mode: 850 mW or less (35 mA max. at 24 V, 44 mA max. at 12 V)^1 Eco Full mode: 520 mW or less (21 mA max. at 24 V, 26 mA max. at 12 V)
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
	Ambient temperature	-20 to +55 °C -4 to +131 °F (No freezing)^*2
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Both main unit and expansion unit housing material: Polycarbonate
Weight		Approx. 75 g
^1 Increases 100 mW (4.0 mA) for High Speed mode ^2 One or two more units connected: -20 to +55 °C (-4 to +131 °F); 3 to 10 more units connected: -20 to +50 °C (-4 to +122 °F); 11 to 16 more units connected: -20 to +45 °C (-4 to +113 °F). When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.

Keyence CA-DRW20X Keyence

€3.474,95

Only 3 units left

Specifications

Model				CA-DRW20X^*1
Type				High-Intensity LumiTrax^TM Light
LED color				White
Power consumption				60.9 W (during normal light emission)
Weight				Approx. 610 g
^*1 When connecting two units, including the CA-DRW20X, to the CA-DC50E, DC30E, the maximum light intensity that can be set is limited. For details, contact KEYENCE.

Keyence SV-E10A Keyence

€282,95

Only 2 units left

Specifications

Model				SV-E10A
Type				Encoder cable, Standard
Length				10 m 32.8'
Note				for 1 k to 5 kW motor

Keyence OP-87664 Keyence

€0,00

Sold Out

Specifications

Model				OP-87664
Type				Adjustable relay bracket
Applicable product				PR Series, PZ Series, LR Series
Material				Nickel-plated zinc, etc.
Weight				Approx. 190 g

Keyence CV-X170F Keyence

€4.499,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88664 Keyence

€199,95

Only 7 units left

Specifications

Model				OP-88664
Type				Ethernet cable (M12 X-coded 8-pin) NFPA79-compatible
Length				2 m 6.6'
Weight				Approx. 130 g

Keyence AP-V80W Keyence

€922,95

Only 6 units left

Specifications

Model		AP-V80W
Type		Standard (DIN), NPN
Display		2-level display with 4 1/2-digit, 7-segment LED (Character height: Upper level: 8 mm 0.32", red, Lower level: 5.7 mm 0.22", green) Alarm indicator: Red LED
Operation indicator		Red LED x 3 (corresponding to control output 1 and 2)
Display resolution		AP-10SK/AP-11SK: Standard mode 0.1inchHg, High-resolution mode 0.01inchHg AP-12SK:Standard mode/0.01PSI, High-resolution mode/0.001PSI AP-13SK:Standard mode/0.1PSI, High-resolution mode/0.01PSI AP-14SK:Standard mode/1PSI, High-resolution mode/0.1PSI AP-15SK/AP-16SK:Standard mode/10PSI, High-resolution mode/1PSI
Power consumption	Normal	12V:1380mW(115mA) or less 24V:1920mW(80mA) or less^*1
	Eco mode	12V:1020mW(85mA) or less 24V:1200mW(50mA) or less^*1
Hysteresis		Variable (Standard: 0.5% of FS; high-resolution: 0.1% of F.S.)
Response time (Chattering prevention function)		Selectable from 5, 10, 100, 500 and 1000 seconds
I/O	Analog output	4 to 20 mA, Maximum load resistance: 260Ω .
	Zero-shift input	Input time of 20 ms or more. (or analog output selectable)
	Bank input
	Control output	NPN (PNP) open collector x 2 channels (N.O./N.C. selectable), 40 VDC (30 VDC) max., 100 mA max. with residual voltage of 1 V max.
Rating	Power voltage	12 to 24 VDC Ripple (P-P) 10% or less
Environmental resistance	Ambient temperature	-10 to +50°C (14 to 122°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively
Material		Housing and cover: Polycarbonate, Keytop: Elastomer
Accessories		AP-V80W (P) / V82W (P): DIN-rail mounting bracket, power cable, unit stickers
Weight		Approx. 85 g
^*1 Excluding the current for analog output Including the current for the sensor head

Keyence OP-4122 Keyence

€0,00

Sold Out

Specifications

Model				OP-4122
Overview				48x48 panel mounting ring.
Applicable product				AP-80
Note				Attached to the panel type indicator. Please use when missing or damaging.
Weight				Approx. 7 g