Machine Vision Systems

Keyence OP-89023 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VT-B10 Keyence

€0,00

Sold Out

Specifications

Model				VT-B10
Type				10" weatherproof cover
Applicable product				VT5-X10

Keyence OP-96658 Keyence

€0,00

Sold Out

Specifications

Model				OP-96658
Overview				Connector cable for reflective and retro-reflective PZ2. It is printed as P-1S.
Applicable product				Reflective and retro-reflective PZ2 Series
Number included				1 pcs.
Length				10 m 32.81'

Keyence PX-H71TZ Keyence

€282,95

Only 5 units left

Specifications

Model		PX-H71TZ^*1
Type		M8 Thrubeam Hex-shaped
Light source LED		Red 4-eleant LED (Wavelength：635 nm)
Detecting distance	TURBO	4 m 13.1'
	SUPER	6 m 19.7'
	ULTRA	12 m 39.4'
	MEGA	20 m 65.6'
Detectable object		ø4 mm ø0.16" Opaque materials
Spot diameter		―
Environmental resistance	Enclosure rating	IEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69K
	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Case material		Housing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7
Accessories		Screw nut (SUS303) x 2, toothed washer (SUS304) x 2
Weight		Approx. 88 g (Including cable)
^*1 Contact KEYENCE for cable length variations of spiral types.

Keyence OP-88757 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-CF5E Keyence

€497,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VS-C1500MX Keyence

€0,00

Sold Out

Specifications

Model		VS-C1500MX
Storage	Internal storage	7 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Image size	1.1"
	Pixel size	2.5 μm 0.10 Mil
	Frame rate	40 fps
Lens	Mount	C-mount
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1
Functions	Output image pixels	4400 × 3296
	Exposure time	0.008 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*2
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		93.2 mm × 52.6 mm × 66 mm 3.67" × 2.07" × 2.60"
Case temperature		0°C to 65°C 32 to 149°F ^*3
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*4
Weight		Approx. 420 g 14.83 oz
^1 Using the configuration software, format the media before use. ^2 Maximum instantaneous current. Average current is below current consumption (including lighting). ^3 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^4 ESD-Safe, IEC61340-5-1 compliant.

Keyence BT-B6 Keyence

€0,00

Sold Out

Specifications

Model		BT-B6
Power Source	Type	Dedicated lithium-ion battery pack ^*1
	Capacity	6270 mAh
	Charging Time	Approx. 6.5 hours (when main unit charging)
Dimensions		78.7 × 40.6 × 22.4 mm 3.10" × 1.60" × 0.88"
Weight		Approx. 115 g 4.06 oz
^*1 While using, charging, or storing the battery pack, if you notice a strange smell, the generation of heat, discoloration, deformation, or any other phenomenon that is different from what you have experienced previously, remove the battery pack from the main unit or charger and stop using the battery pack.

Keyence OP-84332 Keyence

€0,00

Sold Out

Specifications

Model				OP-84332
Applicable product				GT-H12 (K)

Keyence OP-87893 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-SPT5P Keyence

€0,00

Sold Out

Specifications

Model				GL-SPT5P
Type				M14 connector cable for connecting to the GL-T11R
Applicable product				GL-S Series main unit
Number included				1 (set includes transmitter and receiver)
Cable end				Main unit connection connector - M14 connector, straight
Output				PNP
Length				5 m 16.40'
Weight				290 g

Keyence CA-D5XR Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-51591 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R127F-R Keyence

€1.530,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence EG-545 Keyence

€1.160,95

Only 6 units left

Specifications

Model			EG-545^*1
Type			AC adj-dial
Sensitivity adjustment			10-turn potentiometer dial
Function	Operation mode		N.O./N.C. switch-selectable (contact output only)
	Operation mode	External synchronization	Equipment (contact output only)
Output	Control output 1 (NPN)		100 mA max. (40 V max.) Residual voltage： 1 V max.
	Control output 2		SPDT, 250 VAC, 2 A max. (resistive load)
	Disconnection alarm output (NPN)		―
	Response time (Relay contact)		1 ms
			10 ms
OFF-delay time			65 ms (contact output only)
Temperature characteristics			0.08%/°C^*2
Rating	Power voltage		110/120/220/240 VAC ±10 %, 50/60 Hz
	Power consumption		5 VA max.
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight			Approx. 350 g
^1 This product does not comply with EMC directives. ^2 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence FD-EPH6 Keyence

€672,95

Only 5 units left

Specifications

Model				FD-EPH6
Pipe size	Outer diameter of pipe			ø6 0.24" ^*1
	Compatible outer diameter range	Polyurethane		6.0 ±0.1 mm 0.24" ±0.004"
		Nylon		6.0 ±0.08 mm 0.24" ±0.003"
	Pipe materials			Resin pipe connectible to a one-touch coupling
Supported gases				Air, nitrogen, argon, and non-corrosive gases^*2
Supported gas temperature				−10°C to +60°C 14 to 140°F
Pressure resistance				1 MPa
Flow rate detection principle				Ultrasonic transmission time difference method
Flow rate specifications	Rated flow rate	(volume flow rate)		60 L/min 2.12 CFM
		(20°C 68°F, atmospheric pressure conversion) * Initial display	Gas at 20°C 68°F, 0.0 MPa
			Gas at 20°C 68°F, 0.2 MPa	180 L/min 6.35 CFM
			Gas at 20°C 68°F, 0.4 MPa	300 L/min 10.59 CFM
			Gas at 20°C 68°F, 0.6 MPa	420 L/min 14.8 CFM
	Measurement accuracy			±(2.0% of RD+1.0% of F.S.)^3^4
	Repeatability			Response time of 250 ms: ±2.5% of F.S.^3^5
Pressure specifications	Rated pressure			−100 kPa to +0.75 MPa * However, the flow rate cannot be measured in the range of −100 to −50 kPa.
	Overall accuracy			±2.0% of F.S.^*3
	Repeatability			Response time of 2.5 ms: ±0.4% of F.S.
Display resolution	Instantaneous flow			0.01/0.1 L/min
	Accumulated flow			0.01/0.1/1/10/100 L
	Pressure			0.1/1 kPa
Environmental resistance	Enclosure rating			IP65 (IEC60529)
	Ambient temperature			−10°C to +60°C 14 to 140°F (no freezing)
	Relative humidity			35%RH to 85%RH (no condensation)
	Vibration resistance			10 to 500 Hz, power spectral concentration: 0.816 G²/Hz, XYZ axes
	Shock resistance			100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material	Sensor unit (parts that do not contact the gas)			PBT/PAR/iron/Brass electroless nickel plating/POM/NBR/stainless steel/aluminum
	Flow channel (parts that contact the gas)			PBT/Brass electroless nickel plating/NBR/nylon
Weight				Approx. 127 g 4.48 oz
^1 To ensure stable detection, it is recommended to use a pipe inner diameter that is at least equivalent to the inner diameter of this product. ^2 Gases that transmit ultrasonic waves. Measurement may be unstable due to the pressure inside of the pipe and the type of gas. ^3 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by factors such as the condition and type of pipes as well as the temperature and type of gas. ^4 This specification is valid when sufficient straight sections of pipe are provided and the flow velocity distribution is stable. This value does not take into account the effects of fluctuations in flow velocity distribution due to facility factors. ^*5 Accuracy improves with longer response times. As a rule, this is by a proportion of √(250 ms/response time)x.

Keyence NU-EC1A Keyence

€1.033,95

Only 6 units left

Specifications

Model		NU-EC1A^*1
Ethernet Specifications	Compliant standards	IEEE802.3u (100BASE-TX)
	Transmission rate	100 Mbps (100BASE-TX)
	Transmission media	Category 5e or higher STP cable
	Distance between nodes	100 m 328.1'
	Communication ports	RJ45 Connectors × 2
EtherCAT^® Communication Specifications	Supported functions	Process data object communication (Cyclic communication) Mailbox communication Compatible with CoE Explicit Device Identification
Number of connectable sensors		Max. 16 units (Differs depending on the sensor amplifier connected)
Power voltage		24 VDC ±10% Ripple (P-P) 10% max.
Accessories		Instruction manual, power supply connector, end unit × 2
Weight		Approx. 80 g (Including connector)
^*1 EtherCAT^® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.

Keyence SZ-P10PM Keyence

€436,95

Only 5 units left

Specifications

Model				SZ-P10PM
Type				Output Cable, PNP
Applicable product				SZ-04M, SZ-16V
Length				10 m 32.81'
Weight				Approx. 720 g

Keyence IV-H150MA Keyence

€1.379,95

In stock, 12 units

Specifications

Model		IV-H150MA
Type		Short range
Installed distance		50 to 150 mm 1.97" to 5.91"
View		Installed distance 50 mm 1.97": 12 (H) × 9 (V) mm 0.47" (H) × 0.35" (V) to installed distance 150 mm 5.91": 36 (H) × 27 (V) mm 1.42" (H) × 1.06" (V)
Image sensor	Type	1/3 inch monochrome CMOS
	Pixel	752 (H) x 480 (V) 29.61" (H) x 18.90" (V)
Focus adjustment		Auto^*1
Exposure time		1/20 to 1/25,000
Lights	Illumination	Red LED
	Lighting method	Pulse lighting/DC lighting is switchable
Tools	Type	Shape Detection, Color Area^2, Area^3, Edge Pixels, Width/Height, Diameter, Edge Presence, Pitch, Position Adjustment, High Speed Position Adjustment (1-Axis/2-Axis Adjustment)
	Number	Detection tools: 16 tools, position adjustment tool: 1 tool^*4
Switch settings (programs)		32 programs
Image history	Numbers	300 images^5^6
	Condition	NG only/All is selectable^*6
Analysis information		OFF/Statistics/Histograms/Matching rate list is switchable Statistics: Processing time (latest value, MAX, MIN, AVE), number of OKs, number of NGs, trigger numbers, trigger errors, judgment results list by tools Histograms: Histogram, matching degree (latest value, MAX, MIN, AVE), numbers of OKs, numbers of NGs Matching rate list: Judgment results list by tools, matching rate list by tools, judgment bar list by tools^*7
Other functions		HDR, HighGain, Color filters^2, Digital zoom^8, Brightness correction, Tilt correction, White balance^2, Mask function, Color histogram, Test run, ToolAutoTune, Input monitor, Output test, Security settings, Simulator^9, Sensor date/time information addition, Scaling function, Failing sensor list, Failure hold
Indicators		PWR/ERR, OUT, TRIG, STATUS, LINK/ACT
Input	Type	Non-voltage input/voltage input is switchable For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
	Inputs	6 inputs (IN1 to IN6)
	Function	IN1: External trigger, IN2 to IN6: Enable by assigning the optional functions Assignable functions: Program switching, Clear error, External master image registration
Output	Type	Open collector output NPN/PNP is switchable, N.O./N.C. is switchable For open collector NPN output: Maximum rating 26.4 V 50 mA, remaining voltage 1.5 V or lower For open collector PNP output: Maximum rating 26.4 V 50 mA, remaining voltage 2 V or lower
	Outputs	4 outputs (OUT1 to OUT4)
	Function	Enable by assigning the optional functions Assignable functions: Total judge result, RUN, BUSY, Error, Position adjustment result, Judge result of each tool, Result of the logical operation of each tool
Ethernet	Standard	100BASE-TX/10BASE-T^*10
	Connector	M12 4pin connector^*10
Network function		FTP client, EtherNet/IP™, PROFINET
Rating	Power voltage	24 VDC ±10 % (including ripple)
	Current consumption	0.6 A or less
Environmental resistance	Enclosure rating	IP67^*11
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions^*12
	Shock resistance	500 m/s², 3 times in each of 6 directions^*13
Material		Main unit case: Aluminium die-casting, Packing: NBR, Front cover: Acrylic, Mounting adapter: POM
Weight		Approx. 270 g
^1 The focusing position can be automatically adjusted at the time of installation. Deactivated during the operation. Focusing position can be registered by program. ^2 Color type only ^3 Possible with both the Color type and monochrome type ^4 Tools can be installed by programs. ^5 When using the FTP client function: 210 pictures ^6 Saves to the memory in the sensor. The images saved in the sensor can be backed up to the USB memory installed to the intelligent monitor (IV-M30) or to the PC by the software for IV (IV-H1). ^7 This can be displayed on the intelligent monitor (IV-M30) or by software for IV (IV-H1). ^8 Possible with both the color type and monochrome type ^9 Simulator can be used with the IV software (IV-H1). ^10 This is for connection with the intelligent monitor (IV-M30) or software for IV (IV-H1). ^11 Except when polarized filter attachment (OP-87436/OP-87437) is mounted ^12 Except when IV-H dome attachment (IV-D10) is mounted ^*13 Except when IV-G dome attachment (IV-D10) is mounted

Keyence CA-DBB12W Keyence

€0,00

Sold Out

Specifications

Model				CA-DBB12W
Type				Bar Lights
LED color				Blue
Diffusion plate				-^*1
Polarizing plate				-
Power consumption				13.8 W
Input voltage				12 V
Weight				Approx 195 g
^*1 A diffusion plate is included with the CA-DBxxxW. The thickness ofthe diffusion plate is approximately 2 mm 0.08"

Keyence KV-N16ET Keyence

€0,00

Sold Out

Specifications

Model			KV-N16ET
Expansion output unit	Output Points		16 points
	External connectionmethod		MOSFET With overcurrent protection function ^1 ^2
	External connection method		Terminal block
	Rated load		30 VDC, 0.5 A
	Leakage current (when output is OFF)		100 μA or less
	Residual voltage (at ON)		0.8 VDC or less (with 0.5 A output) 0.6 VDC or less (with 0.3 A output)
	ON resistance		−
	Common method		16 points/1 common (8 terminals) ^3 ^4
	Response time	OFF to ON	100 μs or less (with a load of 1 mA or more)
		ON to OFF	200 μs or less (with a load of 1 mA or more)
	Relay life		−
	Relay replacement
Internal current consumption			40 mA or less
Weight			Approx. 210 g
^1 If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common (The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 007 or 008 to 015 for the case of the KV-N16ET(P).) , until the cause of the problem is removed. ^2 MOSFET (N-ch) output for the sink output type; and MOSFET (P-ch) output for the source output type. ^3 The KV-N8ET(P) and KV-N16ET(P) COM terminals are shorted internally. ^4 The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 007 or 008 to 015 for the case of the KV-N16ET(P).

Keyence OP-87433 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LHS25 Keyence

€0,00

Sold Out

Specifications

Model				CA-LHS25
Type				High-resolution lens
Overview				Specialised lens for the compact camera (ø17 ø0.67").

Keyence CA-MP120T Keyence

€2.583,95

Only 9 units left

Specifications

Model		CA-MP120T^1^2
Display panel	No. of dots	1,024 (W) x 768 (H) dots or 800 (W) x 600 (H) dots
	Active display area	245 (W) x 184 (H) mm 9.65 " (W) x 7.24 " (H)
Structure		Panel-mount type Front face is IP65 rated when panel mounted
Backlight	Duration	Approx 100,000 hours (When installed in an upright position under 25 °C 77 °F)
Input/Output	Input signal	Analog RGB signal (0.7 Vp-p, 75 Ω) , Horizontal/vertical synchronization signal
	Input signal mode	1,024 (W) x 768 (H) , Vertical frequency: 60 Hz or 800 (W) x 600 (H) , Vertical frequency: 60 Hz
	Connector	High-density D-sub 15-pin female (3-way, inch screw)
	Touch panel connector	D-sub 9-pin male (2-way, inch screw) ^*3
	Console connector	Connector for RJ45 use
Rating	Power voltage	24 VDC ±10 %
	Current consumption	1 A max.
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	85% RH or less
Weight		Approx. 2.3 kg
^1 Options for CA-MP120(T) Monitor mounting stand: OP-87262, Pole-mounting bracket: OP-42279 ^2 Options for CA-MP120T For XG-X/XG-7000/CV-X400: OP-87264 (Touch panel modular RS-232C cable 3 m 9.84 ') , OP-87265 (Touch panel modular RS-232C cable 10 m 32.8 ') For XG-8000: OP-87258 (Touch panel RS-232C cable 3 m 9.84 ') , OP-87259 (Touch panel RS-232C cable 10 m 32.8 ') Screen protector: OP-87263 Handheld console junction cable: OP-87260 (Handheld console junction cable 3 m 9.84 ') , OP-87261 (Handheld console junction cable 10 m 32.8 ') ^*3 Use a junction cable if the handheld console is inserted into the slot at the console connector. Console connector does not support XG-X Series USB consoles.