Machine Vision Systems

€761,95

Only 3 units left

Buy the Keyence CA-D50E Vision System Component - an industrial machine vision device for automated inspection, measurement, or identification. Features high-resolution imaging and industrial-grade design. The Keyence CA-D50E is a direct replacement for existing installations.

Keyence OP-88875 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89131 Keyence

€0,00

Sold Out

Specifications

Model		OP-89131
Type		With LED (PNP only) ^1 ^2
Sensor side	Connector size	M8 3-pin
	Appearance	L-type
Cable connector	Connector size	M12 4-pin
	Appearance	Straight
Length		2 m 6.6'
Material		Cable: PUR, Connector: Zinc nickel plating
Weight		Approx. 65 g 2.29 oz
^1 Use a heat/cleaning-resistant cable for the weld-resistant all-metal type in environments of 80°C 176°F or higher and for the environment-resistant all-metal type in environments of -25°C -13°F or lower or at 80°C 176°F or higher. ^2 When used with the general-purpose all-metal type or the environment-resistant all-metal type, the enclosure rating is IP67.

Keyence SJ-H132 Keyence

€0,00

Sold Out

Specifications

Model		SJ-H132
Type		H
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method/applied voltage		Pulse AC method, ±7000 V
Ion balance control method		Dual I.C.C. method
Ion balance		±30 V ^*1
Operating distance		50 to 2000 mm 1.97" to 78.74"
Control input		NPN open collector or contact point signal without voltage
Control output		NPN photo relay, Maximum 100 mA max. (40 V or less)
Major functions		Condition alarm, ion level alarm, alarm output
Air purge connection port		Rc 1/8
Air purge supplied pressure		0.5 MPa or less ^*2
Effective length		1320 mm 51.97" ^*3
No. ofelectrodes		30
Static elimination bar length		1280 mm 50.39"
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	500 mA (at 24 V), 350 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	35 to 85% RH (no condensation)
Material	Electrode probe	Tungsten
	Main unit	ABS/PC
Weight	Static elimination bar	1450 g 51.15 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" (22 Hz), 600 mm 23.62" (10 Hz), 1500 mm 59.06" (1 Hz) Operating ambient temperature: 0 to +40°C 32 to 104°F Operating ambient humidity: 35 to 65% RH 0.3 m/s 1.3'/s downflow ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence SJ-E01 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-E5G Keyence

€0,00

Sold Out

Specifications

Model				SV2-E5G
Type				Encoder cable, Hi-flex robotic
Length				5 m 16.4'
Note				for 50 to 750 W motor

Keyence FU-4F Keyence

€132,95

Only 9 units left

Specifications

Model		FU-4F^*1
Size		ø3 mm0.118"
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.3×2
Minimum bend radius		R25 mm0.984"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 8 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence IV-GD10 Keyence

€1.424,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FS-N11EN Keyence

€277,95

In stock, 13 units

FS-N11EN | Keyence | Digital Fibre Optic Sensors

Keyence OP-89248 Keyence

€0,00

Sold Out

Specifications

Model				OP-89248
Length				5 m 16.4'

Keyence FS-V31M Keyence

€146,95

In stock, 43 units

Specifications

Model		FS-V31M
Type		Monitor output
Output		NPN
Main unit/Expansion unit		Main unit
Control output		1 output
Monitor output (1 to 5 V)
External input		N/A
Light source LED		Red, 4-element LED (Wavelength: 640 nm)
Response time		33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)
Output selection		LIGHT-ON/DARK-ON (switch-selectable)
Display indicator		Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P, Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Size		30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)
Detection mode		Light intensity (area detection possible, automatic sensitivity-tracking function provided)
Timer function		OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control output		NPN open-collector 24 V, 100 mA max.^*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
External inputy		Input time: 2 ms (ON)/20 ms (OFF) min.^*2
Unit expansion		Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.
Number of interference prevention units	Normal operation	HIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Power consumption	Normal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)^*3
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Polycarbonate
Accessories		N/A
Weight		Approx. 80 g
^1 Total current of two outputs should be less than 100 mA. ^2 Only available on certain models. ^3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA). ^4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Keyence GL-RP10N Keyence

€0,00

Sold Out

Specifications

Model				GL-RP10N
Type				Unit connection cable
Number included				1 cable
Cable end				Main unit plug (Grey) - Loose wires
Length				10 m 32.81'
Material				Main unit connection connector: PBT, Cable: PVC
Note				Brown and blue: 22 AWG (nominal cross section: 0.34 mm²), other: 26 AWG (nominal cross section: 0.14 mm²)
Weight				Approx. 400 g

Keyence EX-V02E Keyence

€2.515,95

Only 1 unit left

Specifications

Model		EX-V02E
Type		Controller
Shape		M10 x 18 mm 0.71" Threaded
Measuring range		0 to 2 mm 0.08"
Display range		-19,999 to +19,999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		0.4 µm 0.016 Mil
Sampling rate		40,000 samplings max./sec. ^*1
Display speed		20 times/sec. (2-color, 7-segment LED)
Display power		7-segment 2-color LED
Over-range alarm		±FFFF is displayed.
Control input	Timing input	NPN open-collector or non-voltage contact signal
	Reset input
	Auto-zero input
	Judgment output: Inhibit input
	Synchronization/external settings input
Control output	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
	Signal	NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.)
	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms (ON/OFF selectable)
Strobe output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.C.)
Analog output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*2
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	240 mA or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 235 g
^1 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^2 When the distance between the sensor head and the target is within 50% of the measuring range.

Keyence FU-51TZ Keyence

€289,95

Only 1 unit left

Specifications

Model		FU-51TZ^*1
Optical axis diameter (Standard target to be detected)		ø0.5 mm0.02"
Beam emitting direction		Top
Fibre unit length		1 m39.37" free-cut
Fibre unit diameter		ø1.0
Minimum bend radius		R2 mm0.079" Tough-Flex
Minimum detectable object		Object with a diameter of 0.005 mm0.0002"^*2
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F
Weight		Approx. 5 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence CV-3002 Keyence

€4.424,95

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ER-GL08N03C Keyence

€0,00

Sold Out

Specifications

Model		ER-GL08N03C
Type		General-purpose all-metal shielded type Screw type M8 Connector with pigtail (M12 4-pin) NPN output Long-Range
Power supply cable length		0.3 m 1.0' ^*1
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*2
Response frequency		80 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 40 g 1.41 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence OP-86917 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-D5MX Keyence

€5.019,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-XCA02SO Keyence

€380,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DBW24W Keyence

€1.232,95

Only 8 units left

Specifications

Model				CA-DBW24W
Type				Bar Light
LED color				White
Diffusion plate				A diffusion plate is included with the CA-DBWxxW. The thickness of the diffusion plate is approximately 2 mm 0.08".
Power consumption				27.6 W
Input voltage				12 VDC
Polarizing diffusion plate				OP-87976^*1
Weight				Approx. 345 g
^*1 The included diffusion plate and polarizing diffusion plate cannot be used with the product at the same time. There may be air bubbles or foreign substances on the surface of the polarizing diffusion plate, but these have no effect on the image quality. Even if such substances are present, the product is still within the inspection standards, and these substances do not indicate that the product is defective.

Keyence FU-65 Keyence

€0,00

Sold Out

Specifications

Model		FU-65
Detecting method		Diffuse Reflective
Beam emitting direction		Top
Fibre unit length		50 cm19.685" cannot be cut
Minimum bend radius		R4 mm0.157"
Detection distance		4 mm0.157"^*1
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 5 g
^*1 The detecting distance is a value for white mat paper (the standard detection object) detections.

Keyence CA-DC50E Keyence

€1.521,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-L50 Keyence

€392,95

Only 6 units left

Specifications

Model				CV-L50
Focal point				50 mm 1.97"
F-stop range (aperture)				F1.6 to CLOSE
Minimum WD				1.0 m 3.3'
Mount				C-mount
Filter size				30.5 mm 1.20" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.2 % (-0.1 %)^*1
Resolving power				100 cycles/mm at center, 40 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Polarizing filter				OP-54030
Protective filter				CA-LF30
Weight				Approx. 50 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence FD-XS1E Keyence

€2.039,95

Only 5 units left

Specifications

Model			FD-XS1E
Supported pipe materials			Metal pipes, Plastic pipes (soft/hard) ^*1
Supported fluids			Liquids (water, oil, adhesive, grease, chemical solutions, etc.) ^*1
Supported fluid temperature			0 °C (no freezing on the pipe surface) to 100 °C 32 to 212 °F (Pipe surface temperature)
Clamp set model	Plastic pipe/tube attachment		FD-XC1R1, FD-XC1R2
	Metal pipe attachment		FD-XC1M^*2
Maximum rated flow rate			1000 mL/min
Zero cut flow rate			50 mL/min^*3 (variable, default)
Display resolution	Instantaneous flow rate		1/10 mL/min (Displayed on controller)
Repeatability			Response time 50 ms: ±20 % of RD Response time 500 ms: ±15 % of RD
Hysteresis			Variable
Display method			Status indicator
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529) , IP68G (JIS C0920) ^*4
	Ambient temperature		0 to 60 °C 32 to 140 °F (No freezing)
	Relative humidity		35 % to 85 %RH (No condensation)
	Vibration resistance		10 to 55 Hz, double amplitude 1.5 mm 0.06 ", 2 hours each for X,Y,Z direction
	Shock resistance		50 G 11 ms 3 times each for X,Y,Z direction
Material	Sensor head		Head body: PPS/PPSU, relay amplifier: PPS, cable: PVC, controller connector: PPS/PBT/POM
	Clamp set	For plastic pipe	Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7
		For metal pipe	Metal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7
Weight			Approx. 230 g
^1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe. ^2 When using stainless steel or iron pipes, the ideal pipe wall thickness is as follows, FD-XS1E: approx. 0.5 mm 0.02", FD-XS8E: approx. 1 mm 0.04", FD-XS20E: approx. 1 0.04" to 2 mm 0.08". FD-X signal strength and stability will decrease as the thickness of the pipe wall increases or decreases from the suggested size. ^3 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate. ^4 The connector part of the sensor head cable is IP65/IP67.