Machine Vision Systems

€0,00

Sold Out

Buy the Keyence OP-42382 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence OP-42382 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence TH-315 Keyence

€432,95

Only 5 units left

Specifications

Model		TH-315
Type		Detecting minute metallic objects
Minimum detectable object		0.3 mm dia. x 0.75 mm 0.01" dia. x 0.03" steel wire^*1
Detecting area		15 mm 0.59" dia.
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 170 g
^*1 Data obtained with the amplifi er set at maximum sensitivity when target was travelling at 500 mm 19.69".

Keyence KV-E16R Keyence

€559,95

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LV-21P Keyence

€503,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PH-114 Keyence

€646,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence TA-340 Keyence

€675,95

Only 7 units left

Specifications

Model			TA-340
Sensitivity adjustment			Sensitivity selector switch and fi ne-adjustment trimmer
Output	Control output (One shot)	Solid-state (NPN)	100 mA (40 V max.)^*1
		Relay contact	SPDT 250 VAC 2 A^*2
	Control output		1 ms
			10 ms
OFF-delay time			65 ms (contact output only)
Rating	Power voltage		100/200 VAC ±10 %, 50/60 Hz
	Power consumption		5 VA max.
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Accessories			Plastic screwdriver
Weight			Approx. 330 g
^1 Both the solid-state and contact outputs of the amplifi er are one-shot signals; the signals turn on as the object enters the sensor head. NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP Output Converter. ^2 Both the solid-state and contact outputs of the amplifi er are one-shot signals; the signals turn on as the object enters the sensor head.

Keyence SV2-BE20G Keyence

€0,00

Sold Out

Specifications

Model				SV2-BE20G
Type				Encoder cable, Hi-flex robotic cable with battery
Length				20 m 65.6'
Note				for 50 to 750 W motor

Keyence OP-84350 Keyence

€0,00

Sold Out

Specifications

Model				OP-84350
Type				L-shaped Mounting Bracket
Applicable product				LV-S62
Material				SUS304, SUS(Screw)
Note				Screw (SUS) attached. Optional.

Keyence SV2-M005AS Keyence

€948,95

Only 6 units left

Specifications

Model				SV2-M005AS
General specifications	Applicable servo amplifier			SV2-005L2
	Rated output			50 W
	Rated torque			0.159 N·m ^*1
	Instant maximum torque			0.557 N·m
	Rated current			0.55 Arms
	Instant maximum current			2.0 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.316 N·m/Arms
	Rotor moment of inertia			0.0395 ×10^-4kg·m²
	Rated power rating			6.40 kW/s
	Rated angle acceleration			40200 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			35 ×
	Approx. weight			0.3 kg
^*1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink.

Keyence AP-N10D Keyence

€0,00

Sold Out

Specifications

Model		AP-N10D
Type		Dual output type
Applicable sensor head		AP-41M, AP-41, AP-43, AP-44, AP-48
Configuration/Display range		-15 to +110 % of F.S.
Repeatability		±0.2 % of F.S.
Display resolution		AP-41M/41/44/48: Standard mode 0.1 kPa, High resolution mode 0.01 kPa AP-43: Standard mode 0.001 MPa, High resolution mode 0.1 kPa
Power consumption	Normal	770 mW or less (at 24 V, 32 mA or less/at 12 V, 54 mA or less)
	Eco mode	560 mW or less (at 24 V, 23 mA or less/at 12 V, 37 mA or less)
Expansion units		Max. 16 units (Dual output type is counted as 2 units.)^*1
Control output(s)		2^*2
Display temperature characteristic		±1 % of F.S. (When the temperature varies from 25 °C 77 °F)
Response time (Chattering prevention function)		1 ms/2.5 ms/5 ms/100 ms/500 ms/1,000 ms/5,000 ms selectable
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % max. Class2
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)^*3
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Material		Main unit and cover: Polycarbonate
Weight		Approx. 20 g
^1 Can connect to other N-bus sensor amplifiers. N-bus represents the wire-saving system for KEYENCE-manufactured sensor amplifiers. ^2 Number of outputs when connected to the communication unit NU Series. There are no control output wires. ^*3 11 to 16 units connected: 0 to +45 °C 32 to 113 °F (When the sensor amplifier is installed on DIN rail on a metal plate)

Keyence WM-SG Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-L005MT Keyence

€2.000,95

Only 5 units left

Specifications

Model		SJ-L005MT
Type		Tube type
Voltage application method		High frequency AC method (68 kHz)
Applied voltage		2.5 kVAC
Ion balance		±10 V^*1
Static elimination time		See Data Sheet.
Air supply pressure		0.05 to 0.5 MPa
Air supply temperature		0 to +50°C 32 to 122°F
Connection tube		Outer diameter: ø6 0.24", inner diameter: ø4 0.16"
Ozone concentration		0.05 ppm or less^*2
Control input	Static elimination stop input	Switchable between non-voltage input and voltage input Non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) Voltage input: Maximum input rating 30 V, ON voltage 7 V or higher, OFF current 0.1 mA or lower, ON current 1.5 mA or lower (at 30 V)^*3
	Reset input
	LPC mode input
Control output	Alarm (N.C.)/Ion level alarm (N.O.)	Open-collector output 30 VDC or less 50 mA max., residual voltage 1.5 V or less NPN/PNP settings switchable^3^4
Ratings	Power voltage	24 VDC ±10% (including ripple) or 12 VDC (dedicated AC adapter OP-88020/87722^*5)
	Current consumption	0.2 A or less (24 VDC) 0.3 A or less (12 VDC)
Environmental resistance	Ambient temperature	0 to +50°C 32 to 122°F (0 to +40°C 32 to 104°F when OP-87722 is used)
	Relative humidity	35 to 65% RH (no condensation)
	Overvoltage category	I
	Pollution degree	2
Material		Main unit case: PBT / Charge indicator: TPU / Securing bracket: SUS303, PBT Cable: PVC, TPE, copper alloy Connector: PBT, brass + gold plating, phosphor bronze + gold plating, coper alloy + gold plating Fitting: Brass + electroless Ni plating, POM, NBR
Weight		Approx. 65 g
^1 Measurement results taken with tube length of 500 mm 19.69", an installation distance of 50 mm 1.97", and air supply pressure of 0.2 MPa (typical values) ^2 Measurement results taken with tube length of 500 mm 19.69", an installation distance of 300 mm 11.81", and air supply pressure of 0.1 MPa (typical values) ^3 Cannot be used when the power supply is the AC adapter. ^4 To use the ion level alarm with the tube type, use it with air supply pressure of 0.3 MPa or less. ^*5 Rated input of 100 to 240 VAC, 50/60 Hz

Keyence IV4-G500MA Keyence

€5.887,95

Only 3 units left

Specifications

Model		IV4-G500MA
Type		Standard model [IV4-G500MA+OP-88909] Ultra-narrow field of view model
Installed distance		From 50 mm 1.97" [IV4-G500MA+OP-88909] 23 mm to 40 mm 0.91" to 1.57"
Field of view		Installation distance of 50 mm 1.97": 22 (H) × 16 (V) mm to Installation distance of 3000 mm: 118.11" 1184 (H) × 888 (V) mm (reference value) [IV4-G500MA+OP-88909] Installation distance of 23 mm 0.91": 9.8 (H) × 7.3 (V) mm to Installation distance of 40 mm 1.57": 15 (H) × 11.2 (V) mm (reference value)
Image receiving element	Type	1/2.9 inch monochrome CMOS
	Number of pixels	1280 (H) × 960 (V)
Focus adjustment		Auto ^*1
Exposure time		12 μs to 9 ms ^2 ^3
Lights	Illumination	Infrared LED
	Lighting method	Pulse lighting
Indicators		2 indicators (both displaying same content)
Power supply	Average power consumption	2.5 W (without AI imaging illumination unit installed) 6.6 W (with AI imaging illumination unit installed) [IV4-G500MA+OP-88909] 2.5 W
Environmental resistance	Enclosure rating	IP67 ^*4 [IV4-G500MA+OP-88909] ─
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing) ^*5
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	Frequency: 10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² 3 times in each of 6 directions
Material		Main unit case: Zinc die-casting. Front cover: Acrylic. Operation indicator cover: TPU ^*6
Weight		Approx. 75 g 2.65 oz (no AI imaging illumination unit) Approx. 225 g 7.94 oz (with AI imaging illumination unit) [IV4-G500MA+OP-88909] Approx. 85 g 3.00 oz
^1 Focus position can be automatically adjusted during installation. It cannot be adjusted while running. Focus position can be registered separately for each program. ^2 With an AI imaging illumination unit installed, exposure time is up to 6.25 ms. ^3 Maximum exposure time is 500 ms only when lighting is set to OFF. ^4 Except when polarizing filters (OP-88642/OP-88643/OP-88646/OP-88647) are installed. ^5 When the operating ambient temperature exceeds 40°C 104°F, install in accordance with KEYENCE instructions, taking appropriate measures for heat dissipation to ensure that the case temperature does not exceed the rated 65°C 149°F. For the case temperature, measure the side with the “IV4 series” label. ^6 ESD safe and IEC61340-5-1 compliant.

Keyence SZ-01SSAFETY Keyence

€3.604,95

Only 3 units left

Buy the Keyence SZ-01SSAFETY - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence SZ-01SSAFETY is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence FD-XS8E Keyence

€1.012,95

Only 7 units left

Specifications

Model			FD-XS8E
Supported pipe materials			Metal pipes, Plastic pipes (soft/hard) ^*1
Supported fluids			Liquids (water, oil, adhesive, grease, chemical solutions, etc.) ^*1
Supported fluid temperature			0 °C (no freezing on the pipe surface) to 100 °C 32 to 212 °F (Pipe surface temperature)
Clamp set model	Plastic pipe/tube attachment		FD-XC8R1, FD-XC8R2, FD-XC8R3
	Metal pipe attachment		FD-XC8M^*2
Maximum rated flow rate			Outer diameter of pipe ø 6 0.24 ", 1/4 " (6.35 mm) : 3000 mL/min Outer diameter of pipe ø 8 0.31 ": 8000 mL/min
Zero cut flow rate			50 mL/min^*3 (variable, default)
Display resolution	Instantaneous flow rate		1/10 mL/min (Displayed on controller)
Repeatability			Response time 50 ms: ±20 % of RD Response time 500 ms: ±15 % of RD
Hysteresis			Variable
Display method			Status indicator
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529) , IP68G (JIS C0920) ^*4
	Ambient temperature		-10 to 60 °C 14 to 140 °F (No freezing)
	Relative humidity		35 % to 85 %RH (No condensation)
	Vibration resistance		10 to 55 Hz, double amplitude 1.5 mm 0.06 ", 2 hours each for X,Y,Z direction
	Shock resistance		50 G 11 ms 3 times each for X,Y,Z direction
Material	Sensor head		Head body: PPS/PPSU, relay amplifier: PPS, cable: PVC, controller connector: PPS/PBT/POM
	Clamp set	For plastic pipe	Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7
		For metal pipe	Metal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7
Weight			Approx. 250 g
^1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe. ^2 When using stainless steel or iron pipes, the ideal pipe wall thickness is as follows, FD-XS1E: approx. 0.5 mm 0.02", FD-XS8E: approx. 1 mm 0.04", FD-XS20E: approx. 1 0.04" to 2 mm 0.08". FD-X signal strength and stability will decrease as the thickness of the pipe wall increases or decreases from the suggested size. ^3 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate. ^4 The connector part of the sensor head cable is IP65/IP67.

Keyence CA-DWC30 Keyence

€0,00

Sold Out

Specifications

Model				CA-DWC30
Peak wavelength after conversion				615 nm 0.024 Mil
Conversion efficiency				Approx. 80 to 90 %^*1
Sheet size				A4 (210 × 297 mm 8.27" × 11.69"), thickness: 0.2 mm 0.01"^*2
Sheet composition				(1) Laminate: Polyester film (transparent, sand mat treatment) (2) Special wavelength converting material (3) Foamed polyester film (white) (4) Highly adhesive, re-peelable type^*3 (5) Release liner with graduated grid
Weight				Approx. 20 g (including the peelable sheet)
^1 This is the value only for the special wavelength converting material. ^2 The wavelength converting material is applied on the entire A4-sized surface with no margins. ^*3 Adhesive strength: 9.4 N/25 mm 0.98" 30 minutes after application, 10.8 N/25 mm 0.98" 24 hours after application

Keyence FD-XA5 Keyence

€1.110,95

Only 6 units left

Specifications

Model		FD-XA5
Type		Panel type, main unit
Display method		Output indicator, 4-digit 7 segment display, OLED, Stability level display
Display refresh frequency		Instantaneous flow: approx. 5 times/second, Discharge amount/Accumulated flow approx. 30 times/second
Response time		50 ms/100 ms/500 ms/1 s/2.5 s/5 s/10 s/30 s/60 s (selectable, default: 500 ms)
Integration data storage interval		Written to the memory every 10 seconds
Memory back up		EEPROM (data storage period: more than 10 years, number of data rewritable times: 1 million times or more) ^*1
Detection mode	ch.1	Instantaneous flow rate mode/Area mode/Pulse output (+) mode/Integrated flow mode/Shot mode (selectable)
	ch.2	Instantaneous flow rate mode/Area mode/Pulse output (-) mode/Shot mode/Error output mode/Bubble alert mode/Error + bubble alert mode (selectable)
Input/output	Output	NPN/PNP setting switch Open collector output: 30 V or lower, main unit: 50 mA or lower/ch.^*2/expansion unit: 20 mA or lower/ch., residual voltage: 2 V or lower
	Analog output	4-20 mA/0-20 mA (selectable) load resistance: 500 ohms or lower
	External input	Flow rate zero input/shot sampling input/integrated flow reset input/zero shift input (selectable) Short circuit current: NPN 1 mA or lower/PNP 2 mA or lower, input time: 20 ms or longer
Network support		IO-Link^*3
Unit expansion		-
Protection circuit		Power supply reverse connection protection, power surge protection, output short circuit protection, output surge protection
Power supply	Power voltage	20 to 30 VDC including 10 % ripple (P-P) , Class 2
	Power consumption	195 mA or lower (including the sensor head, excluding the load current)
Environmental resistance	Ambient temperature	-10 to +50 °C (No freezing) 14 to 122 °F
	Relative humidity	35 % to 85 %RH (No condensation)
	Vibration resistance	10 - 55 Hz, double amplitude 1.5 mm 0.06 ", 2 hours each for X,Y,Z direction
	Shock resistance	100 m/s² (approx. 10 G) 16 ms pulse, 1000 times each for X,Y,Z direction
Material		Main body case/front sheet: PC, Key top: POM, Cable: PVC
Weight		Approx. 210 g
^1 Internal data from full time recording can be read via USB (Ver.2.0) communication. ^2 20 mA or lower/ch when adding expansion units. ^*3 IO-Link: Specification v1.1/COM2 (38.4 kbps) is supported. If the end of the cable needs to be an M12 connector when supporting IO-Link communication, connect an M12 conversion connector (OP-88296) to the cable.

Keyence OP-88715 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PX-H72G Keyence

€594,95

Only 5 units left

Specifications

Model		PX-H72G^*1
Type		M12 Thrubeam Armored
Light source LED		Infrared LED (Wavelength：870 nm)
Detecting distance	TURBO	10 m 32.8'
	SUPER	15 m 49.2'
	ULTRA	30 m 98.4'
	MEGA	40 m 131.2'
Detectable object		ø7.5 mm ø0.30" Opaque materials
Spot diameter		―
Environmental resistance	Enclosure rating	IEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69K
	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Case material		Housing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7
Accessories		Screw nut (SUS303) x 4, toothed washer (SUS304) x 2
Weight		Approx. 260 g (Including cable)
^*1 The PX-H72 is available with a 30 m 98.4' cable for the transmitter and 10 m 32.8' cable for the receiver.

Keyence KV-XH16ML Keyence

€640,95

Only 9 units left

Specifications

Model		KV-XH16ML
Type		Positioning/motion unit
No. of control axes		16 axes (total including virtual axes)
Appropriated device		Relay: 2112 points (132 channels) Data memory: 4 words
Output format		MECHATROLINK-III
Connectable CPU unit		KV-X Series/KV-8000A
Max. number of connectable units		7
Refresh		Automatic refresh, direct refresh, synchronous refresh between units
Control mode		Positioning control, Torque control, Speed control, ML-III command, I/O control
Control period		62.5 μs or more (With SV2 Series: 125 μs or more)
Starting time		125 μs
Axis control function execution method		Ladder program, unit program (flow, C language)
Unit program capacity		3 MB (Max. number of blocks: 20000)
Flow	Block type	Positioning control block, synchronization control block, speed control block, torque control block, origin return block, current coordinate change block, speed change block, target coordinate change block, continuous positioning start block, “continuous-point number block” continuous–independent/linear interpolation block, continuous–arc interpolation block, continuous positioning complete standby block, calculation block, standby block, program execute block, program stop/restart block, force close program block, unit interrupt block, cam data read/write block, selection branch block, parallel branch block, merge block, GOTO block, start block, end block
flow	Max. number of flows	256
	Number of simultaneous activities	No upper limit
Flow	Internal data Memory	524288 words
Position unit		mm, inch, deg (angle), PLS (number of pulses) Decimal point position from 0 to 9 digits, unit conversion function available
Cumulative address		-2147483648 to +2147483647 specification units
Positioning control	Positioning mode	Absolute value/relative value
	Position setting range	-2147483648 to +2147483647 specification units
	Interpolation	Linear interpolation, arc interpolation, helical interpolation
	Single operation address	-2147483648 to +2147483647 specification units
	Acceleration/deceleration curve	Linear, SIN
	Acceleration/deceleration time	0 to 65535 ms
	M-code	1 to 65000, WITH/AFTER mode
	Sensor positioning	External input-based switching control from speed to position
	Number of points	100 points/axis (Trajectory control at 100 points or more possible with flows)
	Special function	Synchronous tracking control, absolute position tracking control
Synchronization control	Input	External reference, instruction coordinates, current coordinates
	Input filter	Interference prevention function
	Clutch	Select from direct, slide, and follow-up
	Cam	Resolution: 2048 to 32768 Data points: 4 to 64 (changes according to the resolution)
	Compensation during operation	Compensation via auxiliary input, phase compensation, and step angle compensation
Origin return	Origin return method	Data set type, dog type (push), dog type (selectable from “with Z phase” or “without Z phase”), dog type sizing (selectable from “with Z phase” or “without Z phase”), immediate Z phase, origin sensor and Z phase, rising edge of limit switch, origin sensor midpoint/rising edge
JOG/inching		JOG (high speed/low speed), inching (specifiable pulses)
Teaching		Current coordinate teaching
Memory data		Point parameters (each axis), synchronization parameters (each axis), cam data, unit program, servo parameters, setting read/write during RUN (with some restrictions)
Output display		LINK, CONNECT, error status
Self-diagnosis function		Diagnosis can be made through hardware errors, various parameter errors, error numbers, and error messages
Parameter setting		Parameters can be set from KV STUDIO, ladder programs, and unit programs (flow)
Data backup		Coordinates: nonvolatile memory backup (unlimited) Parameter settings: flash ROM backup (20000 switches)
Internal current consumption		400 mA or less
Weight		Approx. 280 g

Keyence MP-FR10 Keyence

€544,95

Only 2 units left

Specifications

Model		MP-FR10
Type		Single model
Connection bore diameter		Rc3/8" (10 A)
Supported gases		Air and non-corrosive gases
Supported gas temperature		-5 to +50°C, 23 to 122°F
Operating pressure range		0.2 to 1 MPa, 2 to 10 bar, 29 to 145 psi ^*1
Pressure resistance		1.5 MPa, 15 bar, 217.5 psi
Flow rate	Detection principle	Heat based (mass flow rate)
	Rated flow range (normal)	2.0 to 1000.0 L/min 0.12 to 60.00 m³/h 4.24 to 2118.88 ft³/h 0.07 to 35.31 CFM
	Zero cut flow rate	2.0 L/min, 0.12 m³/h 4.24 ft³/h, 0.07 CFM
	Measurement accuracy	±(1.5% of RD + 0.5% of F.S.) ^2 ^3
	Repeatability	±1.0% of F.S. (with an averaging time of 1.0 s)
	Display resolution	0.1 L/min, 0.01 m³/h 0.35 ft³/h, 0.01 CFM
	Response time	150 ms (63% response) ^*4
	Averaging time	OFF/100 ms/200 ms/500 ms/1.0 s/3.0 s/5.0 s/10 s/30 s (selectable)
Pressure (Digital value, gauge pressure)	Rated pressure range	0.000 to 1.000 MPa, 0.00 to 10.00bar, 0.0 to 145.0 psi
	Measurement accuracy	±2.0% of F.S.
	Repeatability	±0.2% of F.S. (with a response time of 50 ms)
	Display resolution	0.001 MPa, 0.01 bar, 0.1 psi
	Response time	Selectable from 10 ms, 50 ms, 100 ms, 500 ms, 1.0 s, and 5.0 s ^*4
Humidity (Dew point)	Rated relative humidity range/ dew point range	15 to 100%RH (no condensation)/Corresponds to the relative humidity range ^5 ^6
	Measurement accuracy	±4°C, ±7°F ^5 ^6
	Display resolution	5%RH/1°C, 1°F ^5 ^6
Temperature	Measurement accuracy	±2.0°C, ±3.6°F ^*7
	Display resolution	0.1°C, 0.1°F ^*7
Shut-off valve	Response time	1 s or less (closed → open)
	Leakage amount	50 mL/min 0.002 CFM (N) or less
Filter/regulator (Standard model only)	Pressure adjustment range	─
	Filtration degree
	Drainage cup capacity
Check valve		Available
Display		Color LCD, status indicator
Data accumulation	Accumulation period	Accumulated data: approx. 2 years/Instantaneous data: approx. 2 weeks
	Data reading	USB 2.0/Ethernet
I/O	Control output (Ch.1/2/3/4/5)	NPN/PNP setting switchable, open collector output 30 VDC or less, N.O./N.C. setting switchable, max. 100 mA/Ch., residual voltage: 2.5 V or less
	Analog output (Ch.1/2)	4 to 20 mA, load resistance: 260 Ω or less ^*4
	External input (Ch.2/3/6)	Short-circuit current: 1.5 mA or less, input time: 20 ms or more
Protection circuit		Power supply reverse connection protection, power supply surge protection, reverse connection protection for each I/O, surge protection for each I/O, overcurrent protection for each output
Power supply	Power voltage	24 VDC +25%/-20% (including ripple), Class 2 or LPS
	Power consumption	1.2 A (300 ms) when opening/closing valve, 100 mA at all other times ^*8 (standalone usage; excluding load current)
Communication interface		USB2.0
Network compatibility		When using only this unit: IO-Link (Specification v1.1/COM3) ^*9 When connecting MP-FEN1 : EtherNet/IP™, PROFINET, Modbus/TCP, MC protocol/SLMP
Environmental resistance	Enclosure rating	IP67 (IEC60529) ^*10
	Ambient temperature	−5°C to +50°C 23°F to 122°F (no freezing) ^*11
	Relative humidity	35%RH to 85%RH (no condensation)
	Vibration resistance	10 to 500 Hz; power spectral density: 0.204 G²/Hz; X, Y, and Z directions
	Shock resistance	300 m/s², XYZ axes, 10 times for each axis
Material		Sensor part : PET/PPS/PBT/POM/aluminum/SPHC Filter/regulator : Aluminum/POM/HDPE/NBR/Nylon ^*12
Weight		Approx. 550 g 19.40 oz
^1 An upstream side pressure of 0.2 MPa or less (a filter/regulator adjustment pressure of 0.2 MPa or less for the standard model) worsens the flow rate characteristic of the shut-off valve. ^2 This value is guaranteed by KEYENCE inspection facilities while testing with air. Errors will be introduced by factors such as the gas type, gas temperature, and ambient temperature. ^3 Value in an environment with a constant temperature of 25°C 77°F and compressed air evaluated as purity class 11 (ISO 8573-1 (2010)/JIS B 8392-1 (2012)).±(5.5% of RD + 0.5% of F.S.) when equivalent to purity class 34. ^4 15 ms is added to the analog output response time. ^5 Measurable when at least 2% of F.S. worth of gas is flowing. ^6 The prescribed accuracy may not be met or the unit may be damaged if the compressed air contains a large amount of oil mist, organic solvent, or other gas. (For details, see “Gas Being Measured” on page 4.) ^7 When the flow is 5% of F.S. or higher. Errors due to heat generated by the main unit occur when the flow is too small. ^8 When connecting MP-FEA1 and/or MP-FEN1, add each device’s current consumption (2.1 A or less including load current). ^9 Use an IO-Link master that can supply 1.2 A or more. (1.6 A or less when connecting an MP-FEA1 and an MP-FEN1.) IO-Link is a registered trademark or trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^10 When protection is provided to prevent dust and liquid from intruding through the exhaust port. The IP67 enclosure rating is lost when a USB connection is established. ^11 If this product is used with a power supply voltage of 26.4 V or more, the upper limit on the ambient temperature is 45°C 113°F. ^12 Nylon is only used on the MP-Fx20R.

Keyence OP-88439 Keyence

€365,95

Only 3 units left

Buy the Keyence OP-88439 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence OP-88439 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence OP-87901 Keyence

€145,95

Only 7 units left

Specifications

Model				OP-87901
Type				Polarised light filter attachment
Applicable product				IV-G600MA
Weight				Approx. 5 g

Keyence CV-X102A Keyence

€5.753,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.