Machine Vision Systems

Keyence OP-89009 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88601 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-G50L Keyence

€0,00

Sold Out

Specifications

Model			FD-G50L
Pipe size	DN (Diameter Nominal)		32 A, 40 A, 50 A
	NPS (Nominal Pipe Size)		1 1/4", 1 1/2", 2"
	Outer diameter of pipe		ø41 to 45 mm 1.61" to 1.77", ø47 to 51 mm 1.85" to 2.01", ø58 to 62 mm 2.28" to 2.44"
	Pipe thickness		1.65 to 3.5 mm 0.06" to 0.138"
Supported pipe materials			Iron, steel, stainless steel
Supported fluids			Air, Nitrogen, other gases^*1
Fluid temperature			0 to 60ºC 32 to 140 °F
Recommended pressure			0.4 MPa or greater (58 PSI or greater)
Rated velocity of flow range			Up to 15 m/s
Actual flow rate range (typical)	m³/h		Pipe size 32 A: 54.00 Pipe size 40 A: 72.00 Pipe size 50 A: 120.00
	L/min		Pipe size 32 A: 900.0 Pipe size 40 A: 1200.0 Pipe size 50 A: 2000.0
	CFM		Pipe size 32 A: 32.00 Pipe size 40 A: 42.00 Pipe size 50 A: 70.00
Standard flow rate range (typical) [CFM]	20°C 68°F 60 psi 0.41 MPa		Pipe size 32 A: 151.58 Pipe size 40 A: 198.95 Pipe size 50 A: 331.58
	20°C 68°F 80 psi 0.55 MPa		Pipe size 32 A: 192.17 Pipe size 40 A: 252.22 Pipe size 50 A: 420.37
	20°C 68°F 100 psi 0.69 MPa		Pipe size 32 A: 232.76 Pipe size 40 A: 305.49 Pipe size 50 A: 509.16
	20°C 68°F 120 psi 0.83 MPa		Pipe size 32 A: 273.35 Pipe size 40 A: 358.77 Pipe size 50 A: 597.95
Display			QVGA 2.2" LCD color monitor
Display update cycle			Approx. 3 Hz
Display resolution	Instantaneous flow rate		0.01 m³/h, 0.1 L/min, 0.01 CFM
	Consumption/leakage amount		0.01 m³, 1 L, 0.1 CF
Response time			1.0 s/2.5 s/5.0 s/10.0 s/30.0 s/60.0 s/120.0 s/200.0 s (variable)
Measurement accuracy	Between 10 and 100% of F.S.		±2.0% of RD^2^3^4^5
	Between 1 and 10% of F.S.		±1.0% of F.S.^2^3^4^5
Zero point error			±0.15% of F.S.^2^6
Static leakage repeatability			±1.0% of RD^4^7
Hysteresis			Variable
Flow units			CFM(S), CFM, m³/h (N), m³/h (S), m³/h, L/min (N), L/min (S), L/min
I/O wiring connection port			M12 4-pin connector (male)
Detection mode (switchable)	ch.1		Instantaneous flow mode/area mode/pulse (+) mode/integrated flow mode/warning mode (consump)^*8
	ch.2		Instantaneous flow mode/area mode/pulse (−) mode/warning mode (leak)/error output mode/analog output/integrated flow reset/flow rate zero input/origin adjustment input^*8
Standard I/O (switchable)	Control output (ch.1/ch.2)		NPN/PNP setting switchable, open collector output 30 VDC or less, max. 100 mA/ch, residual voltage: 2.5 V or less
	Analog output (ch.2)		4 to 20 mA/0 to 20 mA, load resistance: 500 Ω or less
	External input (ch.2)		Short-circuit current: 1.5 mA or less, input time: 20 ms or more
Protection circuit			Power supply reverse connection protection, power supply surge protection, short-circuit protection for each output, surge protection for each output
Analog input (for volume conversion)			M8 4-pin connector (female), analog current input (4 to 20 mA), input resistance: 100Ω or less
Power supplied to pressure sensor			Supply voltage: Equivalent to voltage applied to the FD-G, Supply current:70 mA or less (analog output of the pressure sensor included)
Communication interface	USB		USB 2.0
	Ethernet	Standard	IEEE 802.3u (100BASE-TX)
		Transmission rate	100 Mbps
		Cable	Category 5 or higher STP (shielded twisted pair) or UTP (unshielded twisted pair) cable
		Connector	M12 connector (female, D-code)
Network function			Modbus TCP, EtherNet/IP™, IO-Link^*9
Recording capacity	Consumption amount/ leakage amount		Approx. 5 years
	Events		100
Power supply	Power voltage		20 to 30 VDC including 10% ripple (P-P), Class 2
	Power consumption		350 mA or less at 20 V, 290 mA or less at 24 V, 230 mA or less at 30 V (load current excluded) (analog output of the pressure sensor excluded), 550 mA or less at 20 V, 490 mA or less at 24 V, 430 mA or less at 30 V (Maximum load current excluded) (analog output of the pressure sensor excluded)
Environmental resistance	Enclosure rating		IP65/67 (IEC 60529)^*10
	Ambient temperature		Detection head: −10 to +60°C 14 to 140°F (no freezing), display unit: −10 to +55°C 14 to 131°F (no freezing)
	Relative humidity		5 to 85%RH (no condensation)
	Vibration resistance		10 to 500 Hz, power spectral density: 0.816 G²/Hz, XYZ axes
	Shock resistance		100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material	Display unit		Body: PBT + coating, display: PMMA, Power supply port: SUS304-equivalent, Ethernet port: zinc nickel plating
	Detection head		Body: PPS/SUS304, rear surface: rubber
	Mounting/damping bracket		SUS304
Weight			Approx. 2.7 kg
^1 The gas must be uniform and capable of transmitting ultrasonic waves. Measurement may be unstable due to the pressure inside of the pipe and the type of gas. ^2 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by factors such as the type and status of the pipe and the type and temperature of the gas. ^3 This is the value when considering linearity + span error in a stable environment with a temperature of 25°C 77°F. ^4 Defined with stable velocity of flow distribution. Does not include pulsations and fluctuations in the velocity of flow distribution primarily attributable to the equipment. ^5 The linearity error characteristic due to the pipe is not included in this value. ^6 It is possible to reduce zero point errors by performing an origin adjustment. ^7 This is the value within the range where measurement accuracy is guaranteed. ^8 When Bi-directional is specified, the following functions cannot be used. The selection of the comparison view/leak ratio view/static leakage, the measurement/display of the leakage amount/integrated flow, the setting of the target value/warning set value, and money conversions. Also, the I/O settings are limited as shown below. • ch.1: Pulse(+) mode • ch.2: Pulse(-) mode, Error output mode, Integrated flow reset, Flow zero input, Origin adjustment input ^9 IO-Link: Compatible with specification v1.1/COM1 (4.8 kbps). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^10 The IP65/67 enclosure rating is lost when a USB connection is established.

Keyence CA-CN17X Keyence

€960,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ER-GM08P Keyence

€0,00

Sold Out

Specifications

Model		ER-GM08P
Type		General-purpose all-metal shielded type Screw type M8 Cable PNP output Mid-Range
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		2 mm 0.08" ±10% ^*2
Response frequency		120 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		8 × 8 mm 0.31" × 0.31"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303, Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence FU-85H Keyence

€346,95

Only 3 units left

Specifications

Model		FU-85H^*1
Heat resistant temperature		150°C 302°F^2^3
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2×2
Minimum bend radius		R20 mm0.787"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*4
Environmental resistance	Ambient temperature	-40 to +150 °C -40 to 302 °F
Weight		Approx. 35 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 When this product is used in an environment with a consistently high temperature, we recommend a usage temperature of 130°C 266°F or less. ^3 Use in a dry state. Also, when using the heat resistant type, make a selection with ample room for the ambient temperature. ^4 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence OP-87928 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-VM06LP Keyence

€0,00

Sold Out

Specifications

Model			GL-VM06LP
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			6
Total length			240 mm 9.45"
Detection height			200 mm 7.87"
Protection height			285 mm 11.22"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.1
		OFF→ON	45.7 ^*3
		All blocked→ON	51.2 ^*4
	With channel A or B	ON→OFF	10.0
		OFF→ON	54.9 ^*3
		All blocked→ON	68.2 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	60 ^*5
		Receiver	73 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	48 ^*5
		Receiver	56 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		170 g 6.00 oz
	Receiver
	Total		340 g 12.00 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence SH-440 Keyence

€0,00

Sold Out

Specifications

Model		SH-440^*1
Type		Standard Non-shielded Cylindrical & Threaded
Shape		ø40×55 Cylindrical ＋ Threaded
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		40 x 40 mm 1.57"^*2
Stable detecting range		0 to 18 mm 0.71"
Maximum detecting distance		40 mm 1.57"
Repeatability		0.015 mm 0.0006"^*2
Hysteresis		0.05 mm 0.0002"^*2
Temperature characteristics		0.08%/°C^*2
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 280 g
^1 The EG-547(W) cannot be used in combination with SH-422, 430, 440, 290, 809, 816 and 822. ^2 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence CA-EC80L Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-VM40HN Keyence

€0,00

Sold Out

Specifications

Model			GL-VM40HN
Beam axis spacing/Lens diameter			20 mm 0.79": ø5 ø0.197"
Number of beam axes			40
Total length			800 mm 31.50"
Detection height			780 mm 30.71"
Protection height			825 mm 32.48"
Minimum detectable object size			ø25 mm ø0.98" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.5
		OFF→ON	49.7 ^*3
		All blocked→ON	57.2 ^*4
	With channel A or B	ON→OFF	15.7
		OFF→ON	63.9 ^*3
		All blocked→ON	85.6 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	105 ^*5
		Receiver	116 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	55 ^*5
		Receiver	60 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		530 g 18.70 oz
	Receiver
	Total		1060 g 37.41 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence VS-S500MX Keyence

€0,00

Sold Out

Specifications

Model		VS-S500MX
Storage	Internal storage	7 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Frame rate	81 fps
Lens	Mount	Lens-integrated type
	Max. optical magnification	× 2.0
	Installation distance	50 mm to 500 mm 1.97" to 19.69" ^*2
	Field of view	27 mm to 417 mm 1.06" to 16.42"
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1 (UHS-1)
Functions	Imaging mode	1.6 M 3.2 M 5 M
	Output image pixels	(5 M mode) 2544×1904 1904×2544 2224×2224 2976×1664 1664×2976 3824×1280 1280×3824
	Exposure time	0.033 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Pointer (Class 1 laser product ^*3), Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*4
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		122.3 mm × 52.6 mm × 69.2 mm 4.81" × 2.07" × 2.72"
Case temperature		0°C to 65°C 32 to 149°F ^*5
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*6
Weight		Approx. 570 g 20.12 oz
^1 Using the configuration software, format the media before use. ^2 VS-LxxxMX/CX’s field-of-view measuring range is 150 mm to 3000 mm 5.91" to 118.11". VS-SxxxMX/CX’s field-of-view measuring range is 50 mm to 500 mm 1.97" to 19.69". ^3 FDA (CDRH) Part 1040.10 (The laser classification is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice), IEC60825-1. ^4 Maximum instantaneous current. Average current is below current consumption (including lighting). ^5 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^6 ESD-Safe, IEC61340-5-1 compliant.

Keyence FS-N44N Keyence

€346,95

In stock, 23 units

Specifications

Model		FS-N44N
Type		Cable
Output		NPN
Main unit/expansion unit		Expansion unit
Response time		23 µs (S-HSPD^1^2) /50 µs (HSPD^*3) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) /64 ms (TERA)
Number of control outputs		2
Number of external inputs		1
Light source LED		Transmitter side: Red, four-element LED (wavelength: 660 nm)
Control output		Open-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) /20 mA or less (when used as an expansion unit) Residual voltage: 1.4 V or less (output current: 10 mA or less) /2 V or less (output current: 10 to 100 mA)
External input		Input time: 2 ms (ON) /20 ms (OFF) or longer^*4
Unit expansion		Up to 16 units (17 units connected in total including the main unit) . However, each dual output type will be treated as two expansion units.
Protection circuit		Protection against reverse power connection, output overcurrent, output surge, and reverse output connection
Mutual interference prevention		S-HSPD/HSPD: 0 units, FINE: 4 units, TURBO/SUPER/ULTRA/MEGA/TERA: 8 units (The mutual interference prevention values are twice those shown here when Double is set.)
Power supply	Power voltage	10 to 30 VDC (including 10 % ripple (P-P) or less) , class 2 or LPS^*5
	Power consumption	During normal operation: 870 mW or less (34 mA or less at 24 V/62 mA or less at 12 V) ECO ON: 800 mW or less (31 mA or less at 24 V/56 mA or less at 12 V) ECO FULL: 710 mW or less (28 mA or less at 24 V/49 mA or less at 12 V)^*6
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or less
	Ambient temperature	-20 °C -4 °F to +55 °C +131 °F (no freezing)^*7
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
	Shock resistance	500 m/s²; 3 times each for X, Y, and Z axes
Case material		Main unit and cover: polycarbonate
Weight		Approx. 73 g
^1 Restrictions when S-HSPD is selected: Output 2 of dual output types is fixed to OFF. ^2 Restrictions when S-HSPD is selected Area detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode. Output timer, Limit Detection, and Display Gain cannot be used. FULL cannot be selected for the ECO function. ^3 Restrictions when HSPD is selected Display Gain cannot be used. ^4 The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected. ^5 When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher. ^6 The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max. ^*7 When expanded by 1 to 2 units: -20°C -4°F to +55°C +131°F. When expanded by 3 to 10 units: -20°C -4°F to +50°C +122°F. When expanded by 11 to 16 units: -20°C -4°F to +45°C +113°F. When using 2 outputs, 1 unit is counted as 2 units. The prescribed values for the ambient temperature assume that the sensor amplifi er has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

Keyence KV-H6WE2 Keyence

€1.067,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AP-31A Keyence

€302,95

Only 1 unit left

Specifications

Model		AP-31A
Type		Negative pressure, Analog, NPN
Rated pressure		0 to -101.3 kPa
Fluid type		Air or non-corrosive gases
Type of pressure		Gauge pressure, air or non-corrosive gases
Display		3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm 0.43"), Display cycle: 5 times/s
Display resolution		0.1 kPa (0.001 bar)
Detectable pressure range		-15 to +110 % of F.S.
Hysteresis		Variable (when hysteresis mode is selected), 0.5 % of F.S. in standard mode
Response time (Chattering prevention function)		2.5/5/100/500 ms (selectable)
I/O	Analog output	1 to 5 V (Load impedance: 47 kΩ min.)
	Control output	NPN open collector: 100 mA max. (40 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable)
Rating	Power voltage	12 to 24 VDC ±10 %
	Current consumption	50 mA (at 24 V) or less, 90 mA (at 12 V) or less
Environmental resistance	Pressure resistance	5.0 bar (500 kPa)
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone,Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable
Accessories		Mounting bracket A, mounting bracket B, hexagon socket head cap plug
Weight		Approx. 120 g

Keyence KV-TF40 Keyence

€354,95

Only 5 units left

Specifications

Model		KV-TF40
Type		Temperature control unit
Memory elements		EEPROM rewritable one million times
Number of temperature input points		4 ch
Input		Thermocoupler/Platinum temperature measuring resistor^*1
Temperature sensor types		Thermocoupler: K, J, T, E, R, B, N, S, W5Re/W26Re Platinum temperature measuring resistor: JPt100, Pt100
Indicated accuracy		±0.3% of F.S. ±1 digit (at 25°C 77°F), ±0.7% of F.S. ±1 digit (at 0 to 50°C 32 to 122°F)
Cold junction correction precision		±1°C ±1.8°F
Sampling cycle		125 ms/ch (500 ms/4 ch)
Control period		1 to 100 seconds
Operation mode		PID control (with auto-tuning and 3 mode stabilizer function installed), Heat/cool PID control (with auto-tuning and 3 mode stabilizer function installed), ON/OFF control
Tuning mode		PID auto-tuning mode
Control output		Transistor (sink)
Alarm output		Transistor (sink)^*2
Alarm mode		Absolute value upper limit, absolute value lower limit, deviation upper limit, deviation lower limit, deviation upper limit unexcited, deviation lower limit unexcited, deviation upper and lower limits, within upper and lower limit deviation, absolute value upper limit unexcited, absolute value lower limit unexcited^*3
Output	Rated load	30 VDC, 100 mA or less
	Leakage current at OFF	100 μA or less
	Residual voltage at ON	1.5 V or less
Current sensor (CT) input		4 ch^*4
Current measurement precision		Larger of ±5% of an input value and ±2 A of an input value
Insulation mode		Between inputs and outputs: Photocoupler and transformer insulation, Between input channels: Photocoupler and transformer insulation
Others		Heater wire breaking alarm, control loop wire breaking alarm, measured value bias, output limit, slope setup, manual reset, output control when an error occurs
Internal current consumption		210 mA or less
Weight		Approx. 270 g
^1 Can be set for each channel. ^2 Because the alarm output is used as cooling control output when heat/cool control is used, the alarm output cannot be used as an alarm output function. ^3 Standby operation ON/OFF can be selected in each alarm mode. ^4 Use a KEYENCE sensor (OP-6694). (Sold separately.)

Keyence OP-87660 Keyence

€0,00

Sold Out

Specifications

Model				OP-87660
Applicable product				IL Series
Number included				1 cable
Cable end				M8 L-shaped type - e-con
Length				2 m 6.56'
Note				If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 80 g

Keyence FD-GU1 Keyence

€0,00

Sold Out

Specifications

Model		FD-GU1
System		Switching type
Input supply voltage		100 to 240 VAC; +10%/−15% (50/60 Hz)
Output voltage		24 VDC ±5%
Overvoltage category		ll
Ripple noise		260 mV (p-p) or lower
Output capacity		9.1 W (0.38 A) (Class 2)
Power consumption		100 VAC: 0.3 A or lower; 200 VAC: 0.2 A or lower
Pollution degree		2
Withstand voltage		3000 VAC, 1 minute (between input and output, between all external terminals and case)
Momentary interruption		20 ms or lower
Wiring specifications		AC input: power supply M4 terminal block, 2 poles; Analog output: M3 terminal block, 2 poles; DC output: M12 4-pin connector
Protection circuit		Protection against power supply surge, protection against output short-circuiting
Main unit size		63 2.48" × 240 9.45" × 40 1.57" mm
Environmental resistance	Enclosure rating	IP65/67 (IEC60529)
	Ambient temperature	-20 to +50ºC -4 to 122°F (no freezing)
	Relative humidity	5 to 90%RH (no condensation)
	Vibration resistance	10 to 500 Hz power spectral density: 0.816 G2/Hz in X, Y, Z axis directions
	Shock resistance	Shock resistance 50 m/s²; 16 ms pulses, 1000 times each for X, Y, and Z axes
Material		PBT
Weight		Approx. 400 g

Keyence OP-82177 Keyence

€0,00

Sold Out

Specifications

Model				OP-82177
Type				Binding Band and Rubber Tube Set
Applicable product				FU-95W
Number included				Binding band (2), nonslip rubber (2)
Material				Binding band: Nylon Nonslip rubber: Neoprene
Note				Compatible with ø26 to 80mm pipe diameter.

Keyence ER-30N03C Keyence

€0,00

Sold Out

Specifications

Model		ER-30N03C
Type		Ultra-long distance shielded type Screw type M30 Connector with pigtail (M12 4-pin) NPN output
Power supply cable length		0.3 m 1.0' ^*1
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	26 mm 1.02" ±10% ^*2
	With distance switching (Mode 2)	20 mm 0.79" ±10% ^*2
Response frequency	With default settings (Mode 1)	15 Hz ^3 ^4
	With distance switching (Mode 2)	30 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		78 × 78 mm 3.07" × 3.07"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 100 mA or less for 1 output, or 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Button: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 150 g 5.30 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence FD-V40AP Keyence

€328,95

Only 5 units left

Buy the Keyence FD-V40AP - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FD-V40AP is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence SJ-M300 Keyence

€390,95

Only 6 units left

Specifications

Model		SJ-M300
Type		Controller
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Supply pressure range		0.2 MPa max.
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open-collector, 100 mA max. (40 V max.)
	Ion level alarm output
	Condition alarm output
Effective length		164 mm 6.46" (SJ-M030G,SJ-M030C) 324 mm 12.76" (SJ-M070G,SJ-M070C) ^*2
Total length		220 mm 8.66" (SJ-M030G,SJ-M030C) 380 mm 14.96" (SJ-M070G,SJ-M070C) ^*3
Rating	Power voltage	24 VDC ±10%
	Current consumption	450 mA max.
Environmental resistance	Ambient temperature	0 to +40°C 32 to +104°F
	Relative humidity	35 to 65%RH (no condensation)
Weight		Approx. 300 g
^1 Measured under the following conditions: [SJ-M030G/M070G] Air purge: 3 NL/min per electrode Down flow: 0.3 m/s 0.98 ft/s Operating distance: 50 mm 1.97"(50 Hz), 600 mm 23.62" (8 Hz), 1500 mm 59.06"(1 Hz) [SJ-M030C/M070C] Air purge: None Down flow: 0.3 m/s 0.98 ft/s Operating distance: 50 mm 1.97"(50 Hz), 600 mm 23.62" (8 Hz), 1500 mm 59.06"(1 Hz) ^2 Effective length indicates static elimination range at 50 mm 1.97" operating distance. ^*3 Overall length includes mounting brackets.

Keyence PJ-V21 Keyence

€349,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence WM-CB10 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.