Machine Vision Systems

Model

NR-FV04 ^*1

Type

Pulse measurement unit

Input method

Insulated single-end input, channels insulated from each other, input channels insulated from other units (PC)

Number of channels

4 ch ^*2

Measurement cycle

Maximum sampling cycle: 1 μs (1 MHz) to 60 s

A/D converting system

Successive approximation, simultaneous sampling of all channels

A/D resolution

14 bit

Input frequency band

250 kHz (−3 dB or more)

Low pass filter

PASS, 1.5 kHz, 15 kHz, 50 kHz

Pulse input

Input type

Pulse frequency, pulse count (Single-phase input)

Maximum input voltage

±700 V ^*3

Threshold voltage

+100 V, +50 V, +20 V, +10 V, +5 V, +2.5 V, +1 V, +500 mV, +250 mV, +100 mV, +50 mV, 0 V

Minimum pulse duration

2 μs or more for both ON and OFF

Hysteresis

AUTO, 100 mV, 500 mV, 5 V

Pulse divisions

1 to 64 (Can be set to units of 1 division)

Input coupling

DC rising edge, DC falling edge, AC rising edge, AC falling edge

Digital filter

Pulse frequency: Averaging rate of 1 to 32768 (automatically selected), Pulse count: None

Predictive functions

Predictive calculation, Stop prediction (OFF, ×1.5, ×3, ×5, ×8, ×16)

Sensor power output

Dedicated connectors for OP-88003 (AUX POWER) × 2 when using OP-88003; +12 V, 50 mA or +5 V, 50 mA
NPN open-collector output connectable, sensor power supply not insulated from system bus

Voltage input

Input type

±100 V, ±50 V, ±20 V, ±10 V, ±5 V, ±2 V

Maximum input voltage

±700 V ^*3

Digital filter

Averaging rate: 1 to 128 (automatically selected)

Input coupling

DC, AC

Common mode noise reduction ratio

80 dB or more (at up to 60 Hz DC)

Residual noise level

0.02% of F.S., LPF: 1.5 kHz (200 μs/S, digital filter: ON); 0.05% of F.S., LPF: PASS

Measurement range

Pulse frequency

Measurable range: 0.05 to 16000.00 Hz, Display resolution: 0.01 to 1.00 Hz (selected automatically according to frequency)

Pulse count

Measurable range: 0 to 65,000 counts/sampling cycle, Display resolution: 1 count

±100 V

Measurable range: −110.000 to +110.000 V, Display resolution: 5 mV

±50 V

Measurable range: −55.000 to +55.000 V, Display resolution: 2 mV

±20 V

Measurable range: −22.000 to +22.000 V, Display resolution: 1 mV

±10 V

Measurable range: −11.0000 to +11.0000 V, Display resolution: 0.5 mV

±5 V

Measurable range: −5.5000 to +5.5000 V, Display resolution: 0.2 mV

±2 V

Measurable range: −2.2000 to +2.2000 V, Display resolution: 0.1 mV

Measurement accuracy

Pulse frequency

±0.07% of rdg, ±0.01 Hz (20 Hz to 15 kHz, 20 ms/S, with digital filter ON)

Voltage input

±0.1% of F.S., LPF: 500 Hz, with digital filter ON

Withstand voltage

Input to system bus/earth

2200 VAC (50/60 Hz) for 1 minute

Connector format

Insulated BNC connector

Input impedance

1 MΩ ±1%, approx. 30 pF

Buffer memory

16M data^*4

Warm up time

30 minutes or more

Maximum allowable voltage to ground

[When using OP-89263 1:1 voltage-resistant probe] Measurement terminal, GND terminal: 300 Vrms (CAT II);
[When using OP-89264 1:1 voltage-resistant probe] Measurement terminal, GND terminal: 300 Vrms (CAT II);
[When using OP-88998 10:1 voltage-resistant probe] Measurement terminal: 700 Vrms (CAT II), GND terminal: 300 Vrms (CAT II);
[Direct input] Measurement terminal, GND terminal: 42.4 Vpeak and 30 Vrms, or 60 VDC
^*3

Rating

Power consumption

4 W or less (including OP-88003 sensor power supply)

Environmental resistance

Insulation resistance

500 VDC, 10 MΩ or more

Ambient temperature

0 to +40°C 32°F to 104°F

Relative humidity

10 to 85% RH (no condensation)

Weight

Approx. 270 g 9.53 oz

Model

RC2-22K

Operation method

Addition, subtraction, addition and subtraction

Operation mode

Overcount, auto reset, rotary, range distinction

Return method

Manual reset, external reset, automatic reset (in auto reset mode)

Display power

7-segment LED (character height: 14 mm)

Number of digits

5-digit display (zero suppression method), -9,999 to 99,999^*1

Prescale function

A

1 to 99 is counted per pulse input

B

1 is counted per 1 to 99,999 pulse inputs

Power off memory time

Approx 10 years (at 20°C 68°F)

Input

System

Separate, instruction, phase difference

Mounting method

Panel mount (embedding)

External calibration input signal

Signal

No-voltage input (with contacts, without contacts [count input, inhibit input, reset input])

Highest counting speed

With contacts: 50 Hz, without contacts: 500 Hz, 5 kHz, 50 kHz (switchable; 1:1 ON:OFF ratio)

Control output

One-shot output time

0.01 s to 9.99 s (variable)

Relay

Open-collector output: 10 ms (when set to 50 Hz), 1 ms (when set to 500 Hz), 100 µs (when set to 5 kHz), 15 µs (when set to 50 kHz)

DC output

12 VDC ± 10%, 100 mA maximum

Rating

Power voltage

100 to 240 VAC ±10 %, 50/60 Hz

Power consumption

12VA or less

Environmental resistance

Insulation resistance

100 MΩ or more (tested with a 500 VDC megger) between all the AC external terminals and the case

Noise resistance

Square wave noise generated by a noise simulator, between the power supply terminals, 1 kV for 1 µs

Environmental resistance

Ambient temperature

0 to +50 °C 32 to 122 °F

Relative humidity

35 to 85 % RH (No condensation)

Withstand voltage

500 VAC for 1 minute (between all the external terminals and the case)

Weight

Approx. 320 g

Model

SZ-VP30

Type

18-core Power cable

Applicable product

SZ-V Series

Cable end

Connector (connected to the SZ-V) - Loose wires

Length

30 m 98.42'

Material

PVC

Weight

Approx. 2,200 g

Model

SV2-B005AS

General specifications

Applicable servo amplifier

SV2-005L2

Rated output

50 W

Rated torque

0.159 N·m ^*1

Instant maximum torque

0.557 N·m

Rated current

0.55 Arms

Instant maximum current

2.0 Arms

Rated rotation speed

3000min^-1

High rotation speed

6000 min^-1

Torque constant

0.316 N·m/Arms

Rotor moment of inertia

0.0475 ×10^-4kg·m²

Rated power rating

6.40 kW/s

Rated angle acceleration

40200 rad/s²

Excitation method

Permanent magnet

Position/speed detection encoder

Resolution

22 bits

Type

Absolute (ABS) type

Operating environment

Enclosure rating

Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)

Operating ambient temperature

0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)

Storage ambient temperature

-20 to +60°C -4 to +140°F

Operating/storage ambient temperature

20 to 80% RH (no condensation)

Operating atmosphere

Indoors (no corrosive gas, flammable gas, oil mist, or dust)

Altitude

2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)

Vibration rank

V15

Vibration resistance

49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)

Impact resistance

490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times

Isolation rank

UL: phase A, CE: phase B

Min. insulation resistance

500 VDC, 10 MΩ or more with insulation resistance tester

Isolation voltage tolerance

1500 VAC for 1 minute

Approved standards

UL/CSA standards

UL1004-1, UL1004-6, CSA C22.2 No.100

CE marking

Low-voltage directive

EN60034-1, EN60034-5

EMI

EN55011 Class A, EN61800-3, EN61000-6-4

EMS

EN61800-3, EN61000-6-2

North America EMI standard

FCC Part15 B, ICES-003. Class A

Allowable load inertia moment

35 ×

Approx. weight

0.6 kg

Electromagnetic brake specifications

Capacity

5.5 W

Rated voltage

24 VDC ±10%

Rated current (@20°C 68°F)

0.23 A

Holding torque

0.159 N·m

Release time

60 ms ^*2

Operating time

100 ms ^*2

Model

CL-H100

Type

Expansion Unit

Number of optical unit connections

Supports two CL-H200 expansion units

Environmental resistance

Ambient temperature

0 to 50°C 32 to 122°F

Relative humidity

20% RH to 85% RH (no condensation)

Weight

Approx. 300 g

Model

CA-HX200M

Image element

Monochrome CMOS image receiving element, 16× high-speed reading using square-pixel,
Unit cell size: 5 µm × 5 µm 0.20 Mil × 0.20 Mil

Valid pixel count

1.92 M pixels, 1600 (H) × 1200 (V)

Image size

Equivalent to 2/3 "

Scanning system

Progressive
11.6 ms^*1, 20.1 ms^*2

Pixel transfer frequency

195 MHz (×16 speed) ^*1
130 MHz (×11 speed) ^*2

Electronic shutter

Can be set to 0.01 to 100 msec by specifying the following numerical inputs:
1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 1/50000, 1/100000

Environmental resistance

Ambient temperature

0 to +40 °C 32 to 104 °F

Relative humidity

35 to 85 % RH (no condensation)

Camera cable

High-speed camera cable CA-CHxx

Weight

Approx. 280 g (not including lens)