Machine Vision Systems

€1.516,95

Only 3 units left

Buy the Keyence OP-88324 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence OP-88324 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence OP-87975 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-C64TD Keyence

€485,95

Only 6 units left

Specifications

Model		KV-C64TD
Type		Output unit
External connection method		Connector (MIL standard)^*1
Output	Number of outputs	64 points
	Output mode	MOSFET (sink) (with overcurrent protection function)
	Rated load	30 VDC, 0.2 A
	Leakage current at OFF	100 μA or less
	Residual voltage at ON	0.5 V or less
	ON resistance	-
	Common method	64 points/1 common (4 terminals)^*2
	Operation time	OFF to ON: 150 μs or less,ON to OFF: 300 μs or less
Internal current consumption		120 mA or less
Weight		Approx. 140 g
^1 Connectors for connector-type I/O units are not included XC Series Terminal Block Conversion Unit is available. ^2 Although KV-C64TD and KV-C64TCP have four points, they are the same internally.

Keyence RF-T5P10 Keyence

€328,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89019 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-24X Keyence

€130,95

Only 9 units left

Specifications

Model		FU-24X^*1
Size		M3
Detection arrangement		Coaxial
Fibre unit length		50 cm19.685" cannot be cut
Shape		Straight
Minimum bend radius		R10 mm0.394"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F
Weight		Approx. 4 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence GL-R16H-R Keyence

€459,95

Only 9 units left

Specifications

Model			GL-R16H
Detection capability			ø0.98" ø25 mm
Total length			12.60" 320mm
No. of beam			16
Detection height			11.81" 300mm
Protection height			13.58" 345mm
Beam axis spacing/Lens diameter			20 mm / ø5 0.79" / ø0.20"
Detecting distance			0.66 to 49.21' 0.2 to 15 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	6.6
		OFF→ON	48.7^*2
		All blocked→ON	63.1^*3
	Optical synchronization system (Channel A or B)	ON→OFF	8.1
		OFF→ON	50.9^*2
		All blocked→ON	69.1^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	50
		Receiver	69
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		430 g
	Receiver		440 g
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence BL-N70RE Keyence

€416,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SZ-VP5 Keyence

€831,95

Only 1 unit left

Specifications

Model				SZ-VP5
Type				18-core Power cable
Applicable product				SZ-V Series
Cable end				Connector (connected to the SZ-V) - Loose wires
Length				5 m 16.40'
Material				PVC
Weight				Approx. 400 g

Keyence GL-VM31FN Keyence

€0,00

Sold Out

Specifications

Model			GL-VM31FN
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			31
Total length			320 mm 12.60"
Detection height			300 mm 11.81"
Protection height			324 mm 12.76"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.1
		OFF→ON	48.4 ^*3
		All blocked→ON	55.4 ^*4
	With channel A or B	ON→OFF	14.2
		OFF→ON	63.3 ^*3
		All blocked→ON	82.9 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	73 ^*5
		Receiver	83 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	54 ^*5
		Receiver	59 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		220 g 7.76 oz
	Receiver
	Total		440 g 15.53 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence SJ-H060A Keyence

€953,95

Only 10 units left

Specifications

Model		SJ-H060A
Type		HA
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method/applied voltage		Pulse AC method, ±7000 V
Ion balance control method		Dual I.C.C. method
Ion balance		±30 V ^*1
Operating distance		50 to 2000 mm 1.97" to 78.74"
Control input		NPN open collector or contact point signal without voltage
Control output		NPN photo relay, Maximum 100 mA max. (40 V or less)
Major functions		Condition alarm, ion level alarm, alarm output
Air purge connection port		Rc 1/8
Air purge supplied pressure		0.5 MPa or less ^*2
Effective length		600 mm 23.62" ^*3
No. ofelectrodes		8
Static elimination bar length		560 mm 22.05"
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	500 mA (at 24 V), 350 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	35 to 85% RH (no condensation)
Material	Electrode probe	Tungsten
	Main unit	ABS/PC
Weight	Static elimination bar	780 g 27.51 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" (22 Hz), 600 mm 23.62" (10 Hz), 1500 mm 59.06" (1 Hz) Operating ambient temperature: 0 to +40°C 32 to 104°F Operating ambient humidity: 35 to 65% RH 0.3 m/s 1.3'/s downflow ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence OP-89024 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MD-V9910A Keyence

€6.039,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-85Z Keyence

€0,00

Sold Out

Specifications

Model		FU-85Z^*1
Heat resistant temperature		100°C 212°F^2^3
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2×2
Minimum bend radius		R5 mm0.197" Tough-Flex
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*4
Environmental resistance	Ambient temperature	-40 to +100 °C -40 to 212 °F
Weight		Approx. 25 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 When this product is used in an environment with a consistently high temperature, we recommend an ambient usage temperature of 90°C 194°F or less. ^3 Use in a dry state. Also, when using the heat resistant type, make a selection with ample room for the ambient temperature. ^4 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence AP-C33PFAST Keyence

€279,95

Only 5 units left

Buy the Keyence AP-C33PFAST - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence AP-C33PFAST is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence CA-HL02MX Keyence

€2.720,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence NR-CT050 Keyence

€0,00

Sold Out

Specifications

Model		NR-CT050
Primary side rated current (In)		50 A
Overcurrent withstand capability		1.2 times the primary side rated current (can be continuous)
Maximum wire diameter that can be installed		ø10 0.39"
Installation method		Clamp type (split core)
Ratio error to current load		±0.5% of rdg (20% ≤ In ≤ 100%)
Phase difference for current load		± 90’ (20% In) ± 90’ (100% In)
Protection element		Internal clamping element
Environmental resistance	Insulation resistance	500 V DC/100 M Ω or more
	Ambient temperature	-10°C to +55°C 14°F to 131°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Withstand voltage	2300 V AC/minute
Weight		Approx. 140 g 4.94 oz (with cable)

Keyence MS2-H75 Keyence

€357,95

Only 6 units left

Specifications

Model		MS2-H75
Input conditions	Input voltage	85 to 264 VAC, 110 to 370 VDC^*1
	Frequency	47 to 63 Hz, DC^*1
Inputconditions	Input current (100/200 VAC)	1.9/0.9A or less
	Efficiency (100/200 VAC)	82, 85% typ. (at 100% load)
	Leakage current (100/200 VAC)	0.4, 0.75 mA or less (at 100% load)
	Rush current (100/200 VAC)	25, 50 A or less (at 100% load with a +25°C 77°F cold start)
Output characteristics	Rated voltage	24V
	Variable voltage range	±5% (with V.ADJ)
	Rated current	3.2A
	Ripple/noise voltage	180mV (p-p) or less
	Input fluctuation	0.4% or less
	Load fluctuation	1.5% or less
	Temperature fluctuation	0.02%/°C or less
	Startup time	500 ms or less (when the ambient usage temperature is between 0 and +55°C 32 and 131°F with rated I/O conditions)
	Output holding time	20 ms or more (when the ambient usage temperature is +25°C 77°F and with rated I/O conditions)
Protection	Overcurrent protection	Constant current drop method, automatic recovery, 4.0 A or more
	Overvoltage protection	Activates at 26.4 V or more, voltage interruption method, recovers when input is applied again^*2
Display	Display power	3-digit 7-segment LED (character height: 10 mm 0.39")
	Power off memory time	Approx. 10 years (at +20°C 68°F)
	Display resolution	0.1A/0.4V /1%
Applicable standards	Safety standards	UL: UL508, UL60950-1; C-UL: CSA C22.2 number 14-M95, CSA C22.2 number 60950-1-03; EN: EN60950-1, EN50178; IEC: IEC60950-1
	EMC standard	FCC Part 15 B Class A, EN55011 Class A, EN61000-6-2
	Limits for harmonic current emissions	EN61000-3-2^*3
Other	Parallel operation	Possible (requires OP-42207)^*4
	Series operation	Possible (requires external diode)^*4
	Cooling method	Natural air cooling
Environmental resistance	Insulation resistance	100 MΩ or more at 500 VDC (between input and output, between input and FG, and between output and FG)
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing) (see the derating characteristics)
	Relative humidity	25 to 85 % RH (No condensation)
	Storage temperature	-20 to +70 °C -4 to 158 °F (No freezing)
	Withstand voltage	3.0 kVAC, 50/60 Hz, 1 min (across input and output terminals) 2.0 kVAC, 50/60 Hz, 1min (across input terminals and PE terminal) 500 VAC, 50/60 Hz, 1min (across output terminals and PE terminal)
	Vibration resistance	10 to 57 Hz, Double amplitude 0.3 mm 0.01", 57 to 500 Hz, 19.6 m/s² (2 G), cycle: 5.5 minutes, 2 hours in each of the X, Y, and Z directions
	Shock resistance	Peak acceleration: 300 m/s², 2 times in each of the X, Y, and Z directions
Weight		Approx. 470 g
^1 The rated input voltage and rated frequency when applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^2 To return, turn OFF the input power supply and after leaving it off for 1 minute or more, plug in the input power supply again. The E/F Series is a Zener diode clamp type. It will not restart after the protection circuit operation. ^3 For the MS2-H100, this is applicable only when the load ratio is 70% or less. ^4 The applicable standards do not apply for parallel and serial operations.

Keyence OP-87639 Keyence

€0,00

Sold Out

Specifications

Model				OP-87639
Number included				1
Cable end				M12 L-shaped - Loose wire
Length				10 m 32.81'
Material				Cable: PVCConnector: Zinc nickel plating
Weight				Approx. 410 g

Keyence MD-F5100 Keyence

€0,00

Sold Out

Specifications

Model		MD-F5100
Console (sold separately)		MC-P1
Marking method		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	Yb: fiber laser, Class 4 laser product (IEC 60825-1, JIS C6802, FDA [CDRH] Part 1040.10^*1)
	Wavelength	1090 nm
	Output	50W
Pulse frequency		60 to 120 kHz
Guide laser/Working distance pointer		Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 laser product (IEC 60825-1, JIS C6802, FDA [CDRH] Part 1040.10^*1)
Marking area		120 x 120 x 42 mm 4.72" x 4.72" x 1.65"
Standard working distance (±variable width)		168 mm (± 21 mm) 6.614"(± 0.827")
Marking resolution		2 µm 0.08 Mil
Scan speed		12000 mm 472.44/s max.
Character type	Font	KEYENCE original font (numerical value, alphabet, katakana, hiragana, and kanji)/user font/true type font
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/EAN/UPC/CODE128
	2D code	QR code/micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar Truncated/GS1 DataBar Truncated CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBarLimited/GS1 DataBar Limited CC-A
	Logo image	Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Machinery operation	Fixed point/straight line/dashed line/oval
Marking conditions	Workpiece style	Stationary marking/movement marking (constant speed/encoder)
	Character size (marking height/width)	0.1 to 120 mm 0.004" to 4.72"
	No. of registered programs	2000 settings max.
	No. of program blocks	256 blocks
I/O (Input/output)		Terminal block input and output/MIL connector input and output
Interface		RS-232C, RS-422A, USB 2.0,^*2 Ethernet (100BASE-TX/10BASE-T)
CF memory card slot		Compact flash memory card^*3
Head installation direction		All directions
Head cable length		4 m 13.12'
Cooling method		Controller: forced air cooling, head: natural air cooling
Rated voltage and power consumption		100 to 120 VAC or 200 to 240 VAC ± 10 %, 50/60 Hz, Max. 750 VA
Environmental resistance	Enclosure rating	IP64 (Head)
	Pollution degree	2
	Overvoltage category	II
	Ambient temperature for storage	-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature	0 to +40 °C 32 to 104 °F
	Ambient humidity for storage	30 to 85 % RH (No condensation)
	Relative humidity
Weight		Controller: 27.5 kg Head: 6.7 kg Console: 1.4 kg
^1 The laser classification is implemented based on IEC 60825-1 in accordance with the requirements of FDA [CDRH] Laser Notice. ^2 The USB port is dedicated for use with the PC software. ^*3 SanDisk cards are recommended.

Keyence OP-3145 (R-1) Keyence

€0,00

Sold Out

Specifications

Model				OP-3145
Type				Reflector R-1
Overview				Reflector used with polarized retro-reflective photoelectric sensor.
Applicable product				PZ, PW
Material				Reflector: Acrylic, Base: ABS

Keyence PR-FB30CN Keyence

€349,95

Only 1 unit left

Specifications

Model		PR-FB30CN
Type		Reflective (Background suppression)
Output		NPN
Shape		Flat
Cable connection		M8 connector (4 pin)
Detection distance		1 to 30 mm 0.039" to 1.181"
Number of control outputs		2
Output operation	Output 1	Light-ON
	Output 2	Dark-ON
Response time	Output 1	0.5 ms
	Output 2	ON→OFF: 2.7 ms, OFF→ON: 0.5 ms
Sensitivity adjustment		None
Spot diameter		Approx. ø5 mm (at 30 mm)
Light source		4 element, point light source, red LED (650 nm)
Mutual interference prevention function		4 sensors
Indicator lamp		Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)
Control output		30 VDC or lower, 50 mA or lower Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.
Protection circuit		Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %
	Current consumption	19 mA
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250)
	Insulation resistance	20 MΩ or higher (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower
	Ambient temperature	-25 to +55 °C -13 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin
Accessories		Instruction Manual
Weight		Approx. 10 g

Keyence CA-LH16 Keyence

€242,95

In stock, 11 units

Specifications

Model				CA-LH16
Focal point				16 mm 0.63"
F-stop range (aperture)				F1.4 to F16
Minimum WD				0.2 m 0.7'
Mount				C-mount
Filter size				25.5 mm 1.00" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.05 % (-0.1 %)^*1
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 81 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence GL-VM143FN Keyence

€0,00

Sold Out

Specifications

Model			GL-VM143FN
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			143
Total length			1440 mm 56.69"
Detection height			1420 mm 55.91"
Protection height			1444 mm 56.85"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	9.8
		OFF→ON	54.8 ^*3
		All blocked→ON	68.8 ^*4
	With channel A or B	ON→OFF	33.0
		OFF→ON	94.6 ^*3
		All blocked→ON	142.3 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	157 ^*5
		Receiver	176 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	65 ^*5
		Receiver	73 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		940 g 33.18 oz
	Receiver		950 g 33.53 oz
	Total		1890 g 66.71 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.