Machine Vision Systems

€327,95

In stock, 11 units

Specifications

Model			GV-H130
Type			Mid-range
Light source			Visible semiconductor laser, Wavelength: 655 nm
Laser class	FDA (CDRH) Part 1040.10		Class 2 (560 µW)
	IEC 60825-1
	JIS C6802
Detection distance (Amplifier display )			55 to 130 mm 2.17" to 5.12" (750 to 0)^*1)
Possible display range			768 to -98
Standard detection deviation			1 mm 0.04"
Spot diameter			Approx. ø0.3 mm ø0.012" (Detection distance 130 mm 5.12")
Operation status indicators			Control output: Red LED/Laser radiation emission indicator: Green LED/1 spot indicator: Green LED
Environmental resistance	Enclosure rating		IP67
	Operating ambientluminance	Incandescent lamp	10000ℓx
		Sunlight	20000ℓx
	Ambient temperature		-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material			Housing material: PBT, Display: Polyarylate, Metal: SUS304, Lens cover: Glass, Cable: PVC
Weight			Approx. 130 g^*2
^1 General guideline for amplifier display values relative to detection distance (when distance display mode is set to normal). ^2 Including 2 m 6.6' connector cable (3 m 9.8' cable for GV-H1000)

Keyence IV4-400MA Keyence

€0,00

Sold Out

Specifications

Model		IV4-400MA
Type		Narrow field of view model
Installed distance		From 400 mm 15.75" ^*1
Tools	Available modes	Standard Mode, Sorting Mode, AI Through Count Mode
	Tool with standard mode	Standard/Sorting Modes: AI Differentiate, Outline, ColorArea ^2, Area ^3, EdgePixels, ColorAverage ^2, Brightness Avg ^3, Width, Diameter, Edge Presence, Pitch, Color Prohibit, Position Adjustment, Hi-Sp. Adj (1-axis/2-axis), Blob Count, AI Identify, AI Count, Total, AI OCR, AI Trigger AI Through Count Mode: Count, Total
	Number of tools	65 tools ^*4
Field of view		Installation distance 400 mm 15.75": 58 (H) × 44 (V) mm to Installation distance 3000 mm 118.11": 464 (H) × 348 (V) mm (reference value)
Switch settings (programs)		128 programs (with SD card)/32 programs (without SD card)
Image receiving element	Type	1/2.9 inch monochrome CMOS
	Number of pixels	1280 (H) × 960 (V)
Image history	Number of storable images	100 images ^*5
	Save conditions	Logging Settings 1: NG only/OK near NG threshold ^6/All – selectable. Logging Settings 2: Manually configured number before/after NG/Fixed interval – selectable ^5
Focus adjustment		Auto ^*7
Image data transfer	Transfer destination	microSD card/FTP server/SFTP server – selectable
	Transfer format	BMP/JPEG/iv4p/txt: Selectable, file name can be changed
	Transfer conditions	OK/NG/NG and OK near threshold ^6/OK near threshold ^6/All/Judgment Complete – selectable
Exposure time		12 μs to 10 ms ^*8
Analysis information	RUN display	Tool-specific list (judgment results, match, match bar display) ^*9
	RUN information	Switchable between OFF/histogram/processing time/count/output monitor Histogram: Histogram, match (MAX, MIN, AVG), OKs, NGs Processing time: Processing time (latest value, MAX, MIN, AVG), cap. time (latest value, MAX, MIN, AVG) Count: No. of triggers, OKs, NGs, no. of trigger errors, Output monitor: Output-specific ON/OFF status ^*9
Lights	Illumination	Infrared LED
	Lighting method	Pulse lighting
Other functions	Image capture function	Digital zoom (×2, ×4), HDR, high gain, color filters ^2, white balance ^2, brightness correction, Smart Image Optimization, preliminary capture, trapezoidal shape correction, mirror inversion correction Capture range settings (with high-speed filter disabled: 1280×960, 640×480, 320×240, 160×120. With high-speed filter enabled: 640×480, 320×240, 160×120, 80×60)
	Tool functions	Additional Learning (AI Differentiate, AI Identify, AI OCR, AI Count, AI Trigger. AI Through Count Mode: Count), remove outline, masking function, color extraction/exclusion ^2, color histogram function ^2, monochrome histogram function ^*3, scaling function
	Utilities	List of NG sensor occurrences, NG hold, test run, I/O monitor, security settings (2-step password, Enhanced Security Mode), simulator ^*10, adding FTP image information, multiple position adjustment, adding multiple masters, high-speed program switching, automatic program switching, automatic settings backup/restore, mid-operation threshold changes, excessive input trigger time detection
Indicators		OUT, TRIG, STATUS, LINK/ACT, SD
Input	Type	Switchable between non-voltage input/voltage input For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current approx. 2 mA (at 24 V)
	Number of inputs	6, 3 of which are selectable between IN/OUT
	Function	IN1: External trigger. IN2, IN3, I/O1 to I/O3: Assign any desired function. Assignable functions: Program switching, error clear, ext. master image registration, SD card save stop, OCR serial no. increment, reset
Output	Type	Open collector output: Switchable between NPN/PNP and N.O./N.C. Maximum rating: 30 V, 50 mA, residual voltage 1.5 V or lower ^*11
	Number of outputs	6, 3 of which are selectable between IN/OUT
	Function	Assign any desired function. Assignable functions (Standard/Sorting Mode): Total status (OK/NG), operation, busy, trigger ready, strobe, position adjustment result, tool-specific judgment results, tool-specific logic calculation results, error, SD card error, parts judgment results, master judgment results, insufficient SD capacity, file transfer in progress, AI Trigger output Assignable functions (AI Through Count Mode): Operation, busy, error, tool-specific count up, tool-specific judgment result, tool-specific logic calculation result
Power/I/O	Connector	M12 12-pin A-code male connector
	PoE	PoE Power Class 4/6 ^*12
Ethernet	Standard	1000BASE-T/100BASE-TX
	Connector	M12 8-pin X-code female connector
Network function		FTP client, SFTP client, SNTP client, OPC UA server, MQTT client
Interface compatibility	Built-in Ethernet	EtherNet/IP, PROFINET CC-B ^*13, TCP/IP Nonprocedural Comm (×2 connections)
	Communication unit (IV4-CU1)	PROFINET CC-C ^*14, EtherCAT®
Expanded memory		microSD card (microSD/microSDHC) ^*15
Power supply	Power voltage	24 V +25%, -20% (including ripple) ^*16
	Power consumption	3.4 A or less (at 19.2 V), 2.7 A or less (at 24.0 V)(no AI imaging illumination unit; with communication unit; includes 120 mA output load) 3.3 A or less (at 19.2 V), 2.6 A or less (at 24.0 V)(no AI imaging illumination unit; no communication unit; includes 120 mA output load) 2.1 A or less (at 19.2 V), 1.8 A or less (at 24.0 V)(with AI imaging illumination unit; with communication unit; includes 120 mA output load) ^*17
	Average power consumption	9.3 W (without AI imaging illumination unit) 12.8 W (with AI imaging illumination unit)
Environmental resistance	Enclosure rating	IP67 ^*18
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing) ^*19
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	Frequency: 10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions ^*20
	Shock resistance	500 m/s² 1640.4 ft/s² 3 times in each of 6 directions ^*20
Material		Main unit case: Aluminum die-casting. Front cover: Acrylic (hard coating). Back plastic cover and plastic lid: PBT. Operation indicator cover: TPU. Power supply connector: PA/POM. Ethernet connector: Copper alloy + nickel plating. Label: PC. Power supply connector waterproof cap: PC + ABS alloy. Ethernet connector waterproof cap: PC ^*21
Weight		Approx. 370 g 13.06 oz (no AI imaging illumination unit) Approx. 560 g 19.77 oz (with AI imaging illumination unit)
^1 If using at 3 m 9.8' or more, it is recommended that the polarizing filter be removed before use. ^2 Color type only. ^3 Monochrome type only. ^4 Can be placed on a program-specific basis. This is the total combined number of differentiation tools and position adjustment tools. Up to 64 differentiation tools can be placed. Up to 16 AI Count/AI OCR tools can be placed. In Sorting Mode, 8 differentiation tools can be placed. In AI Through Count Mode and High Speed/Standard Mode, the number of tools that can be placed is two AI Count tools and one Total tool. For high accuracy, six AI Count tools and two Total tools can be placed. ^5 Saved to the sensor’s internal memory. Images saved to the sensor’s internal memory can be backed up to a PC using the PC software (IV-H1SN) or to a USB memory stick or microSD card plugged into the control panel (IV4-CP70) or Display Expansion Unit (IV4-DU10). ^6 AI Differentiate, AI Identify, AI OCR(Show Matching Rate) only. ^7 Focus position can be automatically adjusted during installation. It cannot be adjusted while running. Focus position can be registered separately for each program. ^8 Maximum exposure time is 500 ms only when lighting is set to OFF. ^9 Can be displayed on the control panel (IV4-CP70) or Display Expansion Unit (IV4-DU10), or via PC software (IV-H1SN). ^10 Can be used with PC software (IV-H1SN). ^11 Set total output to 120 mA or less. Residual voltage specifications apply to an output current of 20 mA or less. For an output current of 50 mA, the value is 2.0 V. ^12 For PoE-powered devices, IEEE802.3at Power Class 4 or higher is recommended when using AI imaging illumination units; IEEE802.3bt Power Class 6 or higher is recommended when an AI imaging illumination unit is not in use. When using PoE, device operation may be restricted due to power limitations. ^13 Conformance Class B, applicable protocols: LLDP, SNMP ^14 Conformance Class C, applicable protocols: LLDP, SNMP, MRP ^15 Use KEYENCE-recommended products. ^16 24 VDC +25%/−10% (including ripple) when using OP-88656 (10 m 32.8'). ^17 The system is designed to lower its peak current when equipped with an AI imaging illumination unit. Without it, the peak current will be higher. ^18 Except when polarizing filters (OP-88640/OP-88641/OP-88644/OP-88645) are installed. ^19 When the operating ambient temperature exceeds 40°C 104°F, install in accordance with KEYENCE instructions, taking appropriate measures for heat dissipation to ensure that the case temperature does not exceed the rated 75°C 167°F. Refer to the instruction manual for more information. ^20 Except when dome attachment (IV3-D10) is installed. ^*21 ESD safe and IEC61340-5-1 compliant.

Keyence AP-12S Keyence

€4.594,95

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PR-F51C3PD Keyence

€305,95

Only 3 units left

Specifications

Model		PR-F51C3PD^*1
Type		Thrubeam
Output		PNP
Shape		Flat
Cable connection		M8 connector (3 pin)
Detection distance		0.6 m
Number of control outputs		1 output
Output operation	Output 1	Dark-ON
	Output 2	-
Response time	Output 1	0.5 ms
	Output 2	-
Sensitivity adjustment		None
Spot diameter		-
Light source		4 element, point light source, red LED (650 nm)
Mutual interference prevention function		-
Indicator lamp		Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)
Control output		30 VDC or lower, 50 mA or lower Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.
Protection circuit		Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection
Rating	Power voltage	10 to 30 VDC, including 10 % ripple (P-P)
	Current consumption	Transmitter: 11 mA, Receiver: 16 mA
Environmental resistance	Enclosure rating	IP67 (IEC60529), 4X, 6P, 13 (NEMA250)
	Insulation resistance	20 MΩ or higher (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower
	Ambient temperature	-25 to +55 °C -13 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin
Accessories		Instruction Manual
Weight		Approx. 20 g
^*1 The M8 connector (3 pin) type has 1 control output. If "D" is at the end of the part number, the sensor is equipped with a Dark-ON output. If "L" is at the end of the part number, the sensor is equipped with a Light-ON output. Example: The PR-M51C3PL has a Light-ON output.

Keyence CA-CH10 Keyence

€352,95

In stock, 13 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence EG-540U Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence NQ-P4B5 Keyence

€0,00

Sold Out

Specifications

Model				NQ-P4B5
Length				5 m 16.4'
Material				PVC
Weight				Approx. 170 g 5.99 oz

Keyence TH-110 Keyence

€687,95

Only 2 units left

Specifications

Model		TH-110
Type		Detecting small metallic objects
Minimum detectable object		3.0 mm 0.12" dia. steel ball^*1
Detecting area		100 mm 3.94" dia.
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 1.2 kg
^*1 Data obtained with the amplifi er set at maximum sensitivity when target was travelling at 500 mm 19.69".

Keyence OP-88039 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X490F Keyence

€7.146,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-C10B Keyence

€0,00

Sold Out

Specifications

Model				SV2-C10B
Type				Motor power cable, Standard
Length				10 m 32.8'
Note				for 200 W / 400 W motor

Keyence OP-6250 Keyence

€0,00

Sold Out

Specifications

Model				OP-6250
Type				Securing Ring
Applicable product				FS2-60/62/65
Note				When using the FS2-60/62/65, this adapter and fixing ring are necessary to install the fiber unit. This is included with the corresponding amplifier. Purchase this product additionally when necessary.

Keyence OP-88406 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88149 Keyence

€0,00

Sold Out

Specifications

Model		OP-88149
Power source	Rated input	100 to 240 VAC 50/60 Hz
	Rated output	16 VDC, Max. 3.75 A
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Storage temperature	-20 to +80 °C -4 to 176 °F
Weight		Approx. 250 g

Keyence GL-RPCO3PS Keyence

€558,95

Only 3 units left

Buy the Keyence GL-RPCO3PS Safety Device - an industrial safety component providing personnel protection and machine safeguarding per international safety standards. Features SIL-rated operation, reliable monitoring, and standard safety system integration. The Keyence GL-RPCO3PS is a direct replacement for existing installations.

Keyence OP-87041 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-M021G Keyence

€2.290,95

Only 5 units left

Specifications

Model		SJ-M021G
Type		Static Elimination Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Static elimination time		0.5 sec max.^*1
Ion balance		±15 V or less^*2
Supply pressure range		0.001 to 0.5 MPa^*3
Min. air pressure	With SJ-ML	0.02 MPa (20 Nl/min)
	With SJ-MS/ML1	0.03 MPa (20 Nl/min)
	With SJ-MS/ML2	0.02 MPa (20 Nl/min)
	With SJ-MS/ML3	0.08 MPa (50 Nl/min)
	With SJ-MS/ML4
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +80 °C 32 to 176 °F^4^5
	Relative humidity	35 to 65 % RH
Weight		Approx. 600 g
^1 At installation distance 50 mm 1.97", air flow 60 Nl/min (ambient temperature 20 to 30 °C 68 to 86 °F, relative humidity 40 to 60 %) ^2 Values obtained at an installation distance of 50 mm 1.97" and air flow rate of 20 Nl/min [ambient operating temperature +20 to +30 °C +68 to +86 °F, ambient operating humidity 40 to 60 % RH] (without nozzle) ^3 Inquire for derating of humidity/pressure in environments exceeding +35 °C 95 °F. Use clean or dry air at a temperature of -20 °C -4 °F or less. Min. air pressure varies by nozzle used. ^4 Use a supplied fluid with a temperature of 40 °C 104 °F or less. ^*5 Only for the pressure cable. Other parts should be used with an ambient temperature of 0 to 40 °C 104 °F.

Keyence PR-G51C3PD Keyence

€0,00

Sold Out

Specifications

Model		PR-G51C3PD
Type		Thrubeam
Shape		Rectangular
Output		PNP
Cable connection		M8 connector (3 pin)
Detecting distance		30 m 98.43'
Number of control outputs		2 (Dark-ON +Light ON)^*1
Output operation	Output 1	Dark-ON
	Output 2	―
Response time		1 ms
Sensitivity adjustment		One-turn trimmer (230°)
Spot diameter		―
Light source		4 elements, Red LED (631 nm)
Light interference prevention function		―
Indicator lamp		Transmitter: power supply indicator (green) Receiver: output indicator (yellow), Stable operation indicator (green)
Control output		PNP open collector 30 VDC or less, 100 mA or less Residual voltage: 1.2 V or less at less than 10 mA, 2 V or less at 10 to 100 mA
Stop emission input		Non-voltage input Input time ON: 1 ms or more, OFF: 20 ms or more
Protection circuit		Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %
	Power consumption	Transmitter: 450 mW max. (15 mA max. at 24 V, 15 mA max. at 12 V) Receiver: 360 mW max. (12 mA max. at 24 V, 15 mA max. at 12 V)
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250)^*2
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less
	Ambient temperature	-20 to +70 °C -4 to 158 °F (No freezing)^*3
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-20 to +70 °C -4 to 158 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS 316L, Indicator cover: PES, 7-segment display cover/Lens cover: PMMA (scratch-resistant coating) M18 nut: Brass (Nickel plating), Lock washer: Steel (Chrome plating)
Accessories		Instruction manual
Weight		Approx. 55 g
^1 For the threaded mount type sensors, the outputs are 1 NPN output and 1 PNP output. ^2 For the connector type, the enclosure rating varies depending on the cable that is used. ^*3 When the ambient temperature is 60 °C 140 °F or higher, the device should be powered with no more than 24 VDC and 50 mA.

Keyence PK-72 Keyence

€335,95

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88062 Keyence

€0,00

Sold Out

Specifications

Model				OP-88062
Type				Speed Controller (Low stress)
Overview				For adjusting the air for air push type. Adjusts the spindle extension speed.
Applicable product				GT2-PA12KL/PA12L
Number included				1
Weight				Approx. 0.6 g

Keyence SZ-P10NS Keyence

€547,95

Only 4 units left

Specifications

Model				SZ-P10NS
Type				Output Cable, NPN
Applicable product				SZ-01S
Length				10 m 32.81'
Weight				Approx. 530 g

Keyence FD-R125 Keyence

€3.772,95

Only 5 units left

Specifications

Model		FD-R125
Supported pipe diameter		4" (100 A), ø100 to ø127 3.94" to 5.00" 5" (125 A), ø127 to ø152 5.00" to 5.98"
Supported pipe materials		Metal / resin^*1
Supported fluids		Various liquids (i.e. water, oils, chemicals)^*1
Supported fluid temperature		- 20 to + 120°C - 4.0 to + 248 °F (no freezing on the pipe surface)^*2
Maximum rated flow		Rated flow velocity range: 5.0 m/s Flow rate range (Typical): 4"(100 A): 2500 L/min 660 gal/min 150 m³ /h 5" (125 A): 3700 L/min 990 gal/min 220 m³/h)
Zero cut flow rate		Zero cut: 0.3 m/s (default)^*3 Flow rate (Typical): 220 L / min 60 gal / min 12 m³/h
Display method		Dual row, 5-digit display with white, 14-segment LED; Large status indicator; Output indicators; Stability indicator; Unit indicator
Display update cycle		Approx. 3 Hz
Display resolution		1 (L / min)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s (variable)
Measurement accuracy		Between 20 and 100% of F.S. : ±2.0% of RD^4^5 Between 6 and 20% of F.S. : ±0.4% of F.S. ^4^5
Protection circuit		Power supply reverse connection protection, Power supply surge protection, Short-circuit protection for each output, Surge protection for each output
Zero point error		±0.5% of F.S.^4^6
Hysteresis		Variable
Flow units		L / min, m³ / h, gal / min
Integrated flow unit display		1 / 10 / 100 / 1000 / 10000 (L)
Pipe temperature measurement accuracy		±3°C ±5.4°F (liquid temperature of - 20 to + 50°C, - 4 to + 122°F) ±5°C ±9°F (liquid temperature of 50 to + 120°C, 122 to 248°F) (ambient operating temperature of 25°C 77°F)^*4
Wiring specifications	Power supply	DC power supply: M12 4-pin connector / AC power supply: M4 screw terminal block (selectable)
	I/O	When using a DC power supply: M12 4-pin connector / when using an AC power supply: M3 screw terminal block
Input/Output (Selectable)	Output (ch.1/ch.2)	Control output / Integrated pulse output / Error output / Temperature alarm, NPN / PNP setting switchable,open collector output 30 VDC or less, max. 100 mA / ch., residual voltage: 2.5 V or less^*7
	Analog output (ch.1/ch.2)	Flow rate analog output / Temperature analog output and 4 - 20 mA / 0 - 20 mA (selectable), load resistance: 500 Ω or less^*7
	External input (ch.2)	Integrated flow reset input / Flow rate zero input / Origin adjustment input (selectable), short-circuit current: 1.5 mA or less, input time: 20 ms or more^*7
Rating	Power voltage	20 to 30 VDC including 10% ripple (P-P), Class 2 / 100 to 240 VAC - 15% or + 10% (50 / 60 Hz)
	Current consumption	When using a DC power supply: 200 mA or less (load current excluded), 400 mA or less (load current included) When using an AC power supply: 15 VA or less
Environmental resistance	Enclosure rating	IP65 / 67 (IEC60259), IP69K (ISO20653), Enclosure Type 4X (NEMA250)
	Ambient temperature	- 20 to + 60°C - 4.0 to 140 °F (no freezing)^*2
	Relative humidity	5 to 90%RH (no condensation)
	Vibration resistance	10 to 55 Hz, compound amplitude 1.5 mm 0.06", XYZ axes 2 hours for each axis
	Shock resistance	100 m/s² , 16 ms pulse, XYZ axes, 1000 times for each axis
Dimensions		Main unit size: 218.5 mm × 66.9 mm × 70.7 mm 8.60" × 2.63" × 2.78"
Material	Main unit	Body: aluminum die-casting + coating / PPS, display: reinforced glass, connectors: SUS304-equivalent
	Unit rear	Rubber
	Upper/lower bracket	SUS304
Weight		Main unit: Approx. 1.0 kg Upper/lower bracket: Approx.2.3 kg (including sub unit)
^1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Detection may be unstable due to the type and status of the pipes. ^2 Perform derating depending on the ambient temperature and liquid temperature when using an AC power supply. ^3 The zero cut flow rate can be changed in the settings. ^4 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by the type and status of the pipes, the type and temperature of the fluid, and the zero cut flow rate. ^5 This is the value when considering linearity + span error + repeatability in a stable environment of 25°C 77°F. ^6 It is possible to enhance the precision of zero point error by performing an origin adjustment. ^*7 IO-Link: Compatible with Specification v1.1 / COM2 (38.4 kbps) The setting file can be downloaded from the KEYENCE website. If using the unit in an environment where downloading the file is not accessible via Internet, contact your nearest KEYENCE office. IO-Link is either registered trademarks or trademarks of PROFIBUS Nutzerorganisation e.V. (PNO)

Keyence CA-DRM5PA Keyence

€840,95

Only 1 unit left

Specifications

Model				CA-DRM5PA
Type				50 mm 1.97" type

Keyence KV-8000SO Keyence

€914,95

Only 5 units left

Buy the Keyence KV-8000SO PLC Module - a programmable logic controller component from Keyence's industrial automation platform. Provides reliable process control, I/O interfacing, and communication capabilities for manufacturing and process systems. The Keyence KV-8000SO is a direct drop-in replacement for existing PLC installations.