Machine Vision Systems

€939,95

Only 1 unit left

Specifications

Model		EX-V05E
Type		Controller
Shape		ø14.5 x 20 mm ø0.57" x 0.79" Cylindrical, threaded
Measuring range		0 to 5 mm 0.20"
Display range		-19,999 to +19,999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		1 µm
Sampling rate		40,000 samplings max./sec. ^*1
Display speed		20 times/sec. (2-color, 7-segment LED)
Display power		7-segment 2-color LED
Over-range alarm		±FFFF is displayed.
Control input	Timing input	NPN open-collector or non-voltage contact signal
	Reset input
	Auto-zero input
	Judgment output: Inhibit input
	Synchronization/external settings input
Control output	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
	Signal	NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.)
	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms (ON/OFF selectable)
Strobe output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.C.)
Analog output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*2
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	240 mA or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 235 g
^1 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^2 When the distance between the sensor head and the target is within 50% of the measuring range.

Keyence CU-21A Keyence

€655,95

Only 4 units left

Specifications

Model		CU-21A
Type		Standard
External calibration input signal	Connection sensor	NPN open-collector output type or type with output with contacts (signal input and synchronization input)
Input	No. of inputs	2
	Minimum input time	5 ms ^*1
	Input system	Transistor (via NPN output device), contact (via limit switch/microswitch, etc.)
Control output		Relay output: 1c, 250 VAC, 2 A (resistive load)
Timer		―
Functions		AND logic
Operation mode		Standard, synchronous
Control output	Relay contact	250 VAC 2A SPDT (1c) (resistive load)
	Transistor	―^*2
DC output		12 VDC ±10%, 200 mA max.
Rating	Power voltage	100 to 240 VAC ±10 %, 50/60 Hz
	Power consumption	7 VA max.
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 105 g
^1 Required off time: 15 ms minimum. ^2 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP output converter.

Keyence GV-H450 Keyence

€370,95

In stock, 13 units

Specifications

Model			GV-H450
Type			Long-range
Light source			Visible semiconductor laser, Wavelength: 655 nm
Laser class	FDA (CDRH) Part 1040.10		Class 2 (560 µW)
	IEC 60825-1
	JIS C6802
Detection distance (Amplifier display )			160 to 450 mm 6.30" to 17.72" (290 to 0)^*1)
Possible display range			295 to -50
Standard detection deviation			3 mm 0.12"
Spot diameter			Approx. ø0.8 mm ø0.031" (Detection distance 450 mm 17.72")
Operation status indicators			Control output: Red LED/Laser radiation emission indicator: Green LED/1 spot indicator: Green LED
Environmental resistance	Enclosure rating		IP67
	Operating ambientluminance	Incandescent lamp	5000ℓx
		Sunlight	10000ℓx
	Ambient temperature		-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material			Housing material: PBT, Display: Polyarylate, Metal: SUS304, Lens cover: Glass, Cable: PVC
Weight			Approx. 190 g^*2
^1 General guideline for amplifier display values relative to detection distance (when distance display mode is set to normal). ^2 Including 2 m 6.6' connector cable (3 m 9.8' cable for GV-H1000)

Keyence OP-88413 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88349 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DZW5 Keyence

€540,95

Only 1 unit left

Specifications

Model				CA-DZW5
Type				Line Light
LED color				White
Power consumption				4.7 W^*1
Input voltage				12 VDC
Weight				Approx. 240 g
^*1 When using a line camera with the CA-DC21E & CA-DC40E, set light configuration to DC mode.

Keyence FU-81C Keyence

€544,95

Only 2 units left

Specifications

Model		FU-81C^*1
Heat resistant temperature		350°C 662°F^*2
Fibre unit length		1 m39.37" cannot be cut
Minimum bend radius		R25 mm0.984"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*3
Environmental resistance	Ambient temperature	-30 to +350 °C -22 to 662 °F
Weight		Approx. 24 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 Use in a dry state. Also, when using the heat resistant type, make a selection with ample room for the ambient temperature. ^*3 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence FU-VJ2 Keyence

€0,00

Sold Out

Specifications

Model				FU-VJ2
Overview				· Type to which 2 sets of optical integrators (4 optical integrators total) can be connected through 4 through holes. · The external diameter is 70 mm2.756". This type is sealed with V40 O-rings. See the dimensions for information on the product shape.
Heat resistant temperature				200°C 392°F^*1
Material				SUS304
Accessories				O-ring × 1 : fluoro-rubber (JIS 4 type D)
Weight				Approx. 280 g
^*1 Use in a dry state. Also, when using the heat resistant type, make a selection with ample room for the ambient temperature.

Keyence ER-C08 Keyence

€0,00

Sold Out

Specifications

Model				ER-C08
Type				M8 Through-Metal cap (×2)
Material				SUS303
Weight				Approx. 15 g 0.53 oz

Keyence CB-B20E Keyence

€698,95

In stock, 12 units

Specifications

Model		CB-B20E^*1
Type		Head extension cable
Cable min. bending R		22 mm 0.87"
Cable length		20 m 65.6'
Environmental resistance	Enclosure rating	IP67 (IEC60529)^*2
Material		PVC
Weight		Approx. 1,500 g
^1 Regarding cable extension between the head and controller: Up to 2 cables can be connected with the CB-BxxE, and these cables should be kept to a total length of 30 m 98.4' or less. ^2 This value is from a case in which the sensor head has been connected. However, the controller side connector is not included.

Keyence CA-MP12 Keyence

€3.027,95

Only 3 units left

Buy the Keyence CA-MP12 Vision System Component - an industrial machine vision device for automated inspection, measurement, or identification. Features high-resolution imaging and industrial-grade design. The Keyence CA-MP12 is a direct replacement for existing installations.

Keyence NR-CA04 Keyence

€1.563,95

Only 4 units left

Specifications

Model		NR-CA04 ^*1
Type		Acceleration measurement unit
Input method		Charge output sensor input / Single-end input, channels not insulated from each other; input channels switchable between insulated and not insulated from other units (PC)
Number of channels		4 ch^*2
Measurement cycle		Maximum sampling cycle: 10 µs (100 kHz) to 60 s
A/D converting system		Delta-sigma method, simultaneous sampling of all channels
A/D resolution		24 bit
Low pass filter		PASS, 100 Hz, 1 kHz, 10 kHz (−12 dB/oct)
Maximum input rating		±25 V
		±50,000 pC
Withstand voltage	Input to system bus/earth	300 VAC (50/60 Hz) for 1 minute
Connector format		Charge output sensor input: Miniature (10-32UNF); Voltage input/output (built-in pre-amplifier) Sensor input: Non-insulated BNC connector
Input impedance		100 kΩ ±1%, approx. 38 pF
Input type	Sensor input	±50000 m/s² ±164042.0 ft/s², ±20000 m/s² ±65616.8 ft/s², ±10000 m/s² ±32808.4 ft/s², ±5000 m/s² ±16404.2 ft/s², ±2000 m/s² ±6561.7 ft/s², ±1000 m/s² ±3280.8 ft/s², ±500 m/s² ±1640.4 ft/s², ±200 m/s² ±656.2 ft/s², ±100 m/s² ±328.1 ft/s², ±50.0 m/s² ±164.0 ft/s², ±20.0 m/s² ±65.6 ft/s², ±10.0 m/s² ±32.8 ft/s², ±5.00 m/s² ±16.4 ft/s², ±2.00 m/s² ±6.6 ft/s², ±1.00 m/s² ±3.3 ft/s² (with acceleration (unit setting: m/s² ft/s²))
	Voltage input	±10 V, ±5 V, ±2 V, ±1 V, ±500 mV, ±200 mV, ±100 mV, ±50 mV
Input coupling	Sensor input	Charge output / Voltage output (built-in pre-amplifier) / Charge output - RMS / Voltage output (built-in pre-amplifier) - RMS
	Voltage input	AC/DC/AC-RMS/DC-RMS
Input frequency band	Electric charge output type	1.5 Hz (−3 dB typ.) to 45 kHz (±0.5 dB)
	Voltage output type (with built-in preamplifier) AC/AC-RMS	1.0 Hz (−3 dB typ.) to 45 kHz (±0.5 dB)
	DC/DC-RMS	45 kHz DC max. (±0.5 dB)
Measurement accuracy	Electric charge output type	±0.9% of F.S. at [Sensor sensitivity] × [Setting range] ≥ 20 pC
	Voltage output type (with built-in preamplifier)	±0.25% of F.S. at [Sensor sensitivity] × [Setting range] ≥ 200 mV
	Voltage	±10 V to ±100 mV range: ±0.1% of F.S. ±50 mV range: ±0.15% of F.S., LPF: 100 Hz
Measurement range	±10 V	Measurable range: −11.0000 to +11.0000 V, Display resolution: 0.5 mV^*3
	±5 V	Measurable range: −5.5000 to +5.5000 V, Display resolution: 0.2 mV^*3
	±2 V	Measurable range: −2.2000 to +2.2000 V, Display resolution: 100 μV^*3
	±1 V	Measurable range: −1.1000 to +1.1000 V, Display resolution: 50 μV^*3
	±500 mV	Measurable range: −550.00 to +550.00 mV, Display resolution: 20 μV^*3
	±200 mV	Measurable range: −220.00 to +220.00 mV, Display resolution: 10 μV^*3
	±100 mV	Measurable range: −110.000 to +110.000 mV, Display resolution: 5 μV^*3
	±50 mV	Measurable range: −55.000 to +55.000 mV, Display resolution: 2 μV^*3
	±50000 m/s² ±164042.0 ft/s²	Measurable range: −55000 to +55000 m/s² -180446.2 ft/s² to +180446.2 ft/s², Display resolution: 2 m/s² 6.6 ft/s²^*3
	±20000 m/s² ±65616.8 ft/s²	Measurable range: −22000 to +22000 m/s² -72178.5 ft/s² to +72178.5 ft/s², Display resolution: 1 m/s² 3.3 ft/s²^*3
	±10000 m/s² ±32808.4 ft/s²	Measurable range: −11000 to +11000 m/s² -36089.2 ft/s² to +36089.2 ft/s², Display resolution: 0.5 m/s² 1.6 ft/s²^*3
	±5000 m/s² ±16404.2 ft/s²	Measurable range: −5500 to +5500 m/s² -18044.6 ft/s² to +18044.6 ft/s², Display resolution: 0.2 m/s² 0.7 ft/s²^*3
	±2000 m/s² ±6561.7 ft/s²	Measurable range: −2200 to +2200 m/s² -7217.8 ft/s² to +7217.8 ft/s², Display resolution: 0.1 m/s² 0.3 ft/s²^*3
	±1000 m/s² ±3280.8 ft/s²	Measurable range: −1100 to +1100 m/s² -3608.9 ft/s² to +3608.9 ft/s², Display resolution: 0.05 m/s² 0.16 ft/s²^*3
	±500 m/s² ±1640.4 ft/s²	Measurable range: −550 to +550 m/s² -1804.5 ft/s² to +1804.5 ft/s², Display resolution: 0.02 m/s² 0.07 ft/s²^*3
	±200 m/s² ±656.2 ft/s²	Measurable range: −220 to +220 m/s² -728.1 ft/s² to +728.1 ft/s², Display resolution: 0.01 m/s² 0.03 ft/s²^*3
	±100 m/s² ±328.1 ft/s²	Measurable range: −110 to +110 m/s² -360.9 ft/s² to +360.9 ft/s², Display resolution: 0.005 m/s² 0.0164 ft/s²^*3
	±50 m/s² ±164.0 ft/s²	Measurable range: −55 to +55 m/s² -180.4 ft/s² to +180.4 ft/s², Display resolution: 0.002 m/s² 0.0066 ft/s²^*3
	±20 m/s² ±65.6 ft/s²	Measurable range: −22 to +22 m/s² -72.2 ft/s² to +72.2 ft/s², Display resolution: 0.001 m/s² 0.0033 ft/s²^*3
	±10 m/s² ±32.8 ft/s²	Measurable range: −11 to +11 m/s² -36.1 ft/s² to +36.1 ft/s², Display resolution: 0.0005 m/s² 0.0016 ft/s²^*3
	±5 m/s² ±16.4 ft/s²	Measurable range: −5.5 to +5.5 m/s² -18.0 ft/s² to +18.0 ft/s², Display resolution: 0.0002 m/s² 0.0007 ft/s²^*3
	±2 m/s² ±6.6 ft/s²	Measurable range: −2.2 to +2.2 m/s² -7.2 ft/s² to +7.2 ft/s², Display resolution: 0.0001 m/s² 0.0003 ft/s²^*3
	±1 m/s² ±3.3 ft/s²	Measurable range: −1.1 to +1.1 m/s² -3.6 ft/s² to +3.6 ft/s², Display resolution: 0.00005 m/s² 0.000164 ft/s²^*3
Buffer memory		16M data^*4
Warm up time		30 minutes or more^*5
Calculationfunction		Single integration (velocity conversion), Double integration (displacement conversion)
Sensor input sensitivity setting range	Electric charge output type	0.01000 to 999.9 pC/(m/s²)
	Voltage output type (with built-in preamplifier)	0.01000 to 999.9 mV/(m/s²)
Anti-aliasing filter		fc = Sampling frequency × 49%, −100 dB at sampling frequency * With a sampling frequency of 1 kS/s or more
Common mode noise reduction ratio		80 dB or more (at max. 60 Hz DC) (typ.)
Crosstalk noise reduction ratio		100 dB or more (typ.)
High pass filter		PASS, 10 Hz (−12 dB/oct)
Disconnection detection function		Available (voltage output (built-in pre-amplifier) models only)
Disconnection detection cycle		Approx. 200 ms
RMS amplitude accuracy		Sine wave: 20 Hz to 1 kHz, ±0.5% of F.S. Crest factor: 4 or less; Response time: 2600 ms
Residual noise level	Electric charge output type	±0.01% of F.S. (typ.) at [Sensor sensitivity] × [Setting range] ≥ 50 pC With low-pass filter of 1 kHz
	Voltage output type (with built-in preamplifier)	±0.05% of F.S. (typ.) at [Sensor sensitivity] × [Setting range] ≥ 200 mV With low-pass filter of 1 kHz
	Voltage	10 to 200 mV range: ±0.01% of F.S. (typ.) 100 mV/50 mV range: ±0.02% of F.S. (typ.), with low-pass filter of 1 kHz
Sensor power supply		22 V ±10% / 4 mA ±20%
TEDS information		Read sensor information
Rating	Power consumption	3.8 W or less
Environmental resistance	Ambient temperature	0 to +40°C 32°F to 104°F
	Relative humidity	10 to 85% RH (no condensation)
Weight		Approx. 270 g 9.53 oz
^1 The above specifications are the values when zero point adjustment is performed after the warm-up period in an environment with a temperature of 23°C ±3°C 73.4°F ±5.4°F. ^2 Max. expansion: 180 ch (with 45 units connected, using NR-X100W), 20 ch (with 5 units connected, using NR-500) ^3 Sensor input with acceleration (unit setting: m/s² ft/s²) ^4 Limited by the NR-X100W buffer memory when using the NR-X100W. ^*5 60 minutes or more when the measurement range is ±50 mV / ±100 mV.

Keyence SH-110 Keyence

€478,95

Only 4 units left

Specifications

Model		SH-110
Type		Standard Shielded Threaded
Shape		M10×18 Threaded
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		10 x 10 mm 0.39" x 0.39"^*1
Stable detecting range		0 to 2 mm 0.08"
Maximum detecting distance		5 mm 0.20"
Repeatability		0.002 mm 0.00008"^*1
Hysteresis		0.01 mm 0.0004"^*1
Temperature characteristics		0.08%/°C^*1
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 55 g
^*1 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence IV3-L4M Keyence

€1.048,95

Only 1 unit left

Specifications

Model		IV3-L4M
Compatible sensor		IV3-400MA
Lights	Illumination	Infrared LED
Power supply		Power is supplied by the connected sensor
Environmental resistance	Enclosure rating	IP67 ^*1
	Ambient temperature	0 to +50°C 32 to 122°F (No freezing)
	Relative humidity	35 to 85%RH (No condensation)
Material		Case: Aluminum die-casting Front cover: Acrylic
Weight		Approx. 195 g 6.88 oz
^*1 Applicable only when mounted to a compatible sensor. Except when the polarizing filter (OP-88644/OP-88645/OP-88646/OP-88647) is mounted.

Keyence PR-G61P Keyence

€503,95

Only 4 units left

Specifications

Model		PR-G61P
Type		Retro-reflective
Shape		Rectangular
Output		PNP
Cable connection		2 m cable
Detecting distance		0.1 to 4.2 m 0.3' to 13.8' (when using R-2L)
Number of control outputs		2 (Dark-ON +Light ON)^*1
Output operation	Output 1	Dark-ON
	Output 2	Light-ON^*2
Response time		0.5 ms
Sensitivity adjustment		Five-turn trimmer
Spot diameter		―
Light source		4 elements, Red LED (630 nm)
Light interference prevention function		2
Indicator lamp		7 segment display (0 to 999), output indicator (yellow)
Control output		PNP open collector 30 VDC or less, 100 mA or less Residual voltage: 1.2 V or less at less than 10 mA, 2 V or less at 10 to 100 mA
Stop emission input		―
Protection circuit		Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %
	Power consumption	450 mW max. (15 mA max. at 24 V, 21 mA max. at 12 V)
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250)^*3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less
	Ambient temperature	-20 to +70 °C -4 to 158 °F (No freezing)^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-20 to +70 °C -4 to 158 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS 316L, Indicator cover: PES, 7-segment display cover/Lens cover: PMMA (scratch-resistant coating) M18 nut: Brass (Nickel plating), Lock washer: Steel (Chrome plating)
Accessories		Instruction manual
Weight		Approx. 75 g
^1 For the threaded mount type sensors, the outputs are 1 NPN output and 1 PNP output. ^2 Output 2 is not available on the threaded mount type or M8 3-pin type. ^3 For the connector type, the enclosure rating varies depending on the cable that is used. ^4 When the ambient temperature is 60 °C 140 °F or higher, the device should be powered with no more than 24 VDC and 50 mA.

Keyence OP-87073 Keyence

€0,00

Sold Out

Specifications

Model				OP-87073
Note				External regenerative resistor: 1.5kW ^*1
^*1 Use of 2 kW, 3 kW, and 5 kW servo amplifiers is possible depending on the operating conditions.

Keyence OP-89251 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87331 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-H20 Keyence

€914,95

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R55F Keyence

€1.113,95

Only 1 unit left

Specifications

Model			GL-R55F
Detection capability			ø0.55" ø14 mm
Total length			22.05" 560mm
No. of beam			55
Detection height			21.26" 540mm
Protection height			22.20" 564mm
Beam axis spacing/Lens diameter			10 mm 0.39" / ø4 ø0.16"
Detecting distance			0.66 to 32.81' 0.2 to 10 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	10.4
		OFF→ON	54.3^*2
		All blocked→ON	78.3^*3
	Optical synchronization system (Channel A or B)	ON→OFF	14.9
		OFF→ON	61.1^*2
		All blocked→ON	96.3^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	62
		Receiver	75
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		780 g
	Receiver
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence WM-6225 Keyence

€0,00

Sold Out

Specifications

Model				WM-6225
Camera unit	Measurement range (W × D × H)			25000 × 11000 × 12500 mm 984.25" × 433.07" × 492.13"
	Camera unit rotation angle	Horizontal rotation		±120°
		Vertical tilt		±30°
	Minimum display unit	Distance		0.001 mm 0.00004"
		Angle		0.001°
	External input			2 non-voltage inputs
	Communication	WLAN communication		IEEE 802.11 a/b/g/n/ac ^*1
		Bluetooth communication		Bluetooth 5.0
		USB communication		USB 3.0
		Infrared communication		945 nm
	Power supply			Supplied from dedicated AC adapter
	Ratings	Rated voltage		24 VDC
		Current consumption		4.5 A
	Environmental resistance	Operating ambient temperature		0 to 40°C 32 to 104°F
		Operating ambient humidity		Max. 80% RH (no condensation)
	Weight			Approx. 7.2 kg 15.87 lb
Contact probe	Probing system accuracy			±(28 + 5 L/1000) μm ^*2
	Marker	No. of markers		7
		Light source		870 nm
	Applicable stylus			M5
	Display	Display method		2.7-inch transmissive TFT color LCD
		Resolution		320 × 240 pixels
		Touch panel		Analog resistive
	Communication	Bluetooth communication		Bluetooth 5.0
		USB communication		USB 2.0
		Infrared communication		945 nm
	Power supply	Battery		Dedicated lithium-ion battery pack
		Capacity		3250 mAh
		Charging time		6.5 hours
		Continuous usage time		Approx. 6 hours
	Ratings	USB connection	Rated voltage	5 VDC
			Current consumption	1 A
		Battery operation	Rated voltage	3.63 VDC +10%/-1%
			Current consumption	1.25 A
	Environmental resistance	Operating ambient temperature		0 to 40°C 32 to 104°F
		Operating ambient humidity		Max. 80% RH (no condensation)
	Weight			Approx. 600 g 21.18 oz (with battery inserted)
Laser-scanning probe	Scanning system accuracy			±(50 + 5 L/1000) μm ^*3
	Repeatability			0.025 mm 0.001" ^*4
	Working distance			300 mm 11.81"
	Depth of field			±100 mm ±3.94"
	Scan speed			Up to 2.4 million points per second
	Laser classification			2 M
	Display	Display method		3.5-inch transmissive TFT color LCD
		Resolution		640 × 480 pixels
		Touch panel		Analog resistive
	Power supply			Supplied from dedicated cable
	Ratings	Rated voltage		24 VDC
		Current consumption		1 A
	Environmental resistance	Operating ambient temperature		0 to 40°C 32 to 104°F
		Operating ambient humidity		Max. 80% RH (no condensation)
	Weight			Approx. 1 kg 2.20 lb
^1 With the WM-WL attached. ^2 Refer to ISO 10360-2 (in the range of 3980 × 2500 × 1500 mm 156.69" × 98.43" × 59.06" and when the operating ambient temperature is 20°C ±1°C 68.0°F ±1.8°F; L represents the measurement length (Unit: mm inch)). ^3 Refer to VDI/VDE 2634 Part 3 (at 20°C ±1°C 68.0°F ±1.8°F; L represents the measurement length (Unit: mm inch)). ^4 2σ, when measuring ball diameter.

Keyence FD-HK3 Keyence

€0,00

Sold Out

Specifications

Model				FD-HK3
Weight				Approx. 10 g

Keyence EM-038B Keyence

€0,00

Sold Out

Specifications

Model		EM-038B^*1
Type		Shielded
Shape		3.8 mm 0.15" dia Cylindrical.
Detecting distance		0.8 mm 0.031" ±15%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		5 x 5 mm 0.20"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Control output		NPN: 200 mA (40 V) max., Residual voltage: 1 V max.
Housing		Stainless steel
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*2
	Current consumption	12 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 38 g (including nuts and 2-m 6.6' cable)
^1 The alternative-frequency type of EM-038 ^2 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.

Keyence CV-S200MU Keyence

€1.142,95

Only 3 units left

Specifications

Model		CV-S200MU
Type		Camera^*1
Image element		1/1.8-inch monochrome CCD image receiving element, square-pixel/all-pixel reading, 2,010,000 pixels Unit cell size: 4.4 x 4.4 µm 0.17 x 0.17 Mil
Valid pixel count		1,920,000 pixels 1600 (H) x 1200 (V) ^*2
Pixel transfer frequency		40 MHz
Scanning system		Progressive (58.5 ms: 2,000,000-pixel mode, 47.6 ms: 1,000,000-pixel mode) Interlace (32.7 ms: 2,000,000-pixel mode, 27 ms: 1,000,000-pixel mode)
Transfer system		Digital serial transfer
Electronic shutter		1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 msec to 9000 msec can be set with numeric values.
Lens mount		Special mount (M15.5 P0.5 male)
Environmental resistance	Ambient temperature	Head: 0 to +40 °C 32 to 104 °F, relay unit: 0 to +40 °C 32 to 104 °F (however, 35 °C 95 °F max. in partial capturing 50 lines or lower)
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Head: Approx. 210 g (including the cable, not the lens) Relay unit: Approx. 70 g
^1 The CA-CN17 camera cable (17 m 55.8') and the CA-CN17R high-flex camera cable (17 m 55.8') cannot be used. ^2 In 1,000,000-pixel mode, 980,000 pixels (1024 x 960) serve as the processing area.