SIMATIC PN/PN Coupler for deterministic data exchange between max.4 PN-Controller per subnet, also from subnet to subnet, PROFIsafe data exchange, I/O-, MSI-, MSO- and data record communication, redundant power supply, PN-connection via SIMATIC BusAdapter (BA), delivery w/o BusAdapter
Simatic S7-1200, Communication Module CM 1241, RS232, 9 PIN SUB D (MALE), SUPPORTS MESSAGE BASED FreePort
Communication module CM 1542-1 for connection of S7-1500 to PROFINET as IO controller: TCP/IP, ISO-on-TCP, UDP, S7 communication, IP broadcast Multicast, SNMPV1, time-of-day synchronization via NTP, 2xRJ45 (10/100 Mbit)
Industrial Ethernet FastConnect RJ45 plug 180 2x 2, RJ45 plug-in connector (10/100 Mbit/s) with rugged metal enclosure and FC connection system, for IE FC Cable 2x 2; 180° cable outlet 1 pack = 50 units
SIMATIC S7-1500, CM PTP RS232 BA Communication module for Serial connection RS232, Freeport, 3964 (R), USS, 19200 Kbit/s, 9-pin D-sub connector
SIMATIC S7-400H, Y-LINK FOR CONNECTING SINGLE-CHANNEL DP SLAVES TO S7-400H AND AS 410H
Communications processor CP 443-1; 2x 10/100 Mbit/s (IE switch); RJ45 ports; ISO; TCP; UDP; PROFINET IO controller; S7 communication; Open communication (SEND/ RECEIVE); S7 routing; IP configuration via DHCP/ Block; IP Access Control List; Time synchronization; extended web diagnostics; Fast Startup; Support for PROFIenergy
COMMUNICATIONS Processor CP 1243-1 FOR CONNECTING Simatic S7-1200 TO TELECONTROL SERVER Basic VIA ETHERNET ALSO SUITED FOR SAFE Communication with NETWORK with FIREWALL and VPN
Simatic S7-1200, Communication Module CM 1241, RS422/485, 9 PIN SUB D (FEMALE) SUPPORTS MESSAGE BASED FreePort
SIMATIC S7-200,USB/PPI CABLE MM MULTIMASTER, FOR CONNECTING S7-200 TO USB PORT OF PC, FREEPORT NOT SUPPORTED
Simatic NET, CP 343-1 LEAN Communication Processor FOR CONNECTING Simatic S7-300 TO IND. ETHERNET VIA TCP/IP and UDP, MULTICAST, SEND/RECEIVE W/ and W/O RFC1006, FETCH/ WRITE, S7-COMMUNICATION(SERVER) PROFINET IO-DEVICE Integrated 2-PORT Switch ERTEC 200, BG EXCHANGE W/O PG, SNMP DIAGNOSTICS, INITIALIZATION VIA LAN, 2 X RJ45 CONNECTION FOR LAN with 10/100 MBIT/S
COMMUNIKATIONSPROCESSOR CP343-1 FOR CONNECTING Simatic S7-300 TO IND. ETHERNET VIA ISO and TCP/IP, PROFINET IO-Controller OR PROFINET IO-DEVICE, INTEGR. 2-PORT Switch ERTEC200 S7-COMM., FETCH/WRITE, SEND/RCV with and W/O RFC1006,MULTICAST DHCP, NTC-CPU SYNC, DIAGNOSTIC, INITIALIZATION VIA LAN, 2 X RJ45 CONNECT. FOR LAN with 10/100 MBIT/S
Communication module CM 1243-5 for connection of SIMATIC S7-1200 to PROFIBUS as DP Master module; PG/OP communication; S7 communication
COMMUNICATIONSPROCESSOR CP443-1 FOR CONNECTING Simatic S7-400 TO INDUST. ETHERN. VIA ISO, TCP/IP and UDP, S7-COMM., FETCH/WRITE, SEND/RCV with and W/O RFC1006, MULTICAST, PROFINET IO- Controller, DHCP, SNMP V2, WEB-, DIAGNOS., INITIALISATION VIA LAN, ACCESS Protection VIA IP-ACCESS LIST, Integrated REAL-TIME Switch ERTEC 400, 2XRJ45 CONNECT. FOR LAN with 10/100 MBIT/S
PC ADAPTER USB A2 USB-ADAPTER (USB V2.0) FOR CONNECTING A PG/PC OR NOTEBOOK TO SIMATIC S7 VIA PROFIBUS OR MPI USB CABLE 5M INCLUDED MPI-KABEL 0,3M CAN BE USED UNDER WINXP/VISTA/ WINDOWS 7 32/64BIT
SCALANCE XB004-1LDG unmanaged Industrial Ethernet Switch for 10/100/1000 Mbit/s; for setting up small star and line topologies; LED diagnostics, IP20, 24 V DC power supply, with 4x 10/100/1000 Mbit/s RJ45 Ports electrical and 1 x 1000 Mbit/s SC port optical (single-mode, glass), up to max. 10 km Manual available as a download
Simatic RF200 READER RF220R IO-LINK IO-LINK-INTERFACE; IP 67, -25 UP TO +70 DGR/C; M30 X 83 MM; with Integrated Antenna 8 Byte IO; 38.4 kBit/s
Communications processor CP 1542-5 for connection of SIMATIC S7-1500 to PROFIBUS DP, DPV1 master or DP slave, S7 and PG/OP communication, time-of-day synchronization, diagnostics, reduced quantity structure
Scalance x204-2, managed ie switch, 4 x 10/100mbit/s rj45 ports, 2 x 100mbit/s multimode bfoc, led diagnostics, error signal contact with set button, redundant power supply, profinet-io device, network management, integrated redundancy manager, incl. electronic manual on cd, c-plug optional
Scalance X208, Managed IE Switch, 8 X 10/100MBIT/S RJ45 PORTS, LED DIAGNOSTICS, ERROR SIGNAL CONTACT with SET Button, REDUNDANT POWER SUPPLY, PROFINET-IO DEVICE, NETWORK MANAGEMENT, Integrated REDUNDANCY MANAGER, INCL. ELECTRONIC MANUAL ON CD, C-PLUG OPTIONAL
SIMATIC DP, RS485 repeater For connection of PROFIBUS/MPI bus systems with max. 31 nodes max. baud rate 12 Mbit/s, Degree of protection IP20 Improved user handling
PROFIBUS OLM/G11-1300V4.0 optical link module with 1 RS485 and 1 glass FOC interface (2 BFOC- sockets), 1300 Nm shaft Length for large distances with signaling contact and test port
Industrial Ethernet FastConnect RJ45 plug 180 2x 2, RJ45 plug-in connector (10/100 Mbit/s) with rugged metal enclosure and FC connection system, for IE FC Cable 2x 2; 180 degr. cable outlet 1 pack = 1 unit