1 year warranty
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
pressure transmitter - XMLP - 300psi - 1/4"18NPT - 4..20mA - M12 - set 1
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Standard power distribution kit |
Complementary
| Characteristic | Value(s) |
|---|---|
| Kit composition | STBPDT2100 module STBXBA2200 base STBXTS2130, spring type connectors STBXTS1130, screw type connectors |
| [Us] rated supply voltage | 115...230 V |
| Supply circuit type | AC |
| Supply frequency | 50...60 Hz |
| Power supply output current | 0â¦10 A 86 °F (30 °C) output circuit) 0â¦2.5 A 140 °F (60 °C) input circuit) 0â¦5 A 86 °F (30 °C) input circuit) 0â¦5 A 140 °F (60 °C) output circuit) |
| Voltage range | 85...265 V AC sensor/actuator bus |
| Hot swapping fallback | Hot swapping illegal |
| Protection type | Built-in overcurrent protection, 10 A time-lag output circuit Built-in overcurrent protection, 5 A time-lag input circuit |
| Permissible current | 30 A for 2 minutes grounding terminal |
| Voltage detection threshold | < 50 V +/-5 AC IN/OUT LED non lit > 70 V +/-5 AC IN/OUT LED lit |
| Product Compatibility | Mounting base STBXBA2200 |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) actuator bus power supply (OUT) 1 LED (Green) sensor bus power supply (IN) |
| Depth | 2.6 in (65.1 mm) |
| Height | 0.7 in (18.4 mm) |
| Width | 4.9 in (125 mm) |
| Product Weight | 0.284 lb(US) (0.129 kg) |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard discrete output kit has 2 discrete outputs, 2 normally open/normally contacts with solid state relay. It is a discrete output kit with a rated supply voltage of 24V DC and a current consumption of 55mA at 5V DC for logic bus. This product is compatible with most major fieldbus networks. It is an IP20 rated product. Its dimensions are 128.3mm (width) x 70mm (depth) x 18.4mm (height) and weighs 0.13kg. It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, CE, UL and CSA. It meets EN/IEC 61131-2 type 3 standards. This kit is suitable for use with I/O base STBXBA2000 and power distribution module STBPDT3100/3105. The kit includes STBXTS2110, 5-terminal spring clamp connector, STBXTS1100, 5-terminal screw type connector, STBXBA3000 base and STBDRC3210 module. The Modicon LMC058 is the optimum solution for axis control and positioning, including automation functions. It forms a part of flexible machine control approach, a key component of MachineStruxure.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Standard digital output kit |
| Kit composition | STBXTS2110, 5-terminal spring clamp connector STBXTS1100, 5-terminal screw type connector STBXBA3000 base STBDRC3210 module |
| Discrete output number | 2 |
| Discrete output type | Relay |
| Discrete output function | 2 NO/NC |
| Discrete output voltage | 24 V 115...230 V |
| Discrete output voltage type | AC DC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Discrete output current | 2000 mA |
| Discrete output logic | Positive or negative |
| Output voltage | 20...250 V AC 5...30 V DC |
| Response Time | 5.25 ms off-to-on 6.75 ms on-to-off |
| Switching capacity in VA | 600 VA resistive |
| Mechanical durability | 1000000 cycles |
| Electrical durability | 100000 cycles resistive |
| Cold swapping | Yes |
| hot swapping | Yes for standard NIMs |
| fallback | State 0 basic NIMs User configurable standard NIMs |
| Protection type | Coil protection integrated fuse on PDM time lag 10 A Output surge protection GMOV |
| Insulation between channels | 500 V for 1 minute |
| Insulation between channels and logic bus | 1780 V for 1 minute |
| Insulation between logic bus and actuator bus | 1500 V for 1 minute |
| Surge current | 20 A 10 ms capacitive |
| Minimum load | 50 mA |
| Reset | Manual reset COM fault |
| Product Compatibility | I/O base STBXBA2000 Power distribution module STBPDT3100/3105 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 55 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) 1 LED per channel (Green) channel status (OUT1 to OUT2) 1 LED (Red) module error (ERR) |
| Height | 0.7 in (18.4 mm) |
| Depth | 2.8 in (70 mm) |
| Width | 5.05 in (128.3 mm) |
| Product Weight | 0.29 lb(US) (0.13 kg) |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | Extendable rack |
| Product Specific Application | For multi-racks configuration |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number of slots | 4 |
| Product Compatibility | I/O module TSXPSY power supply TSXP57 processor Specific application module |
| Electrical connection | 2 connectors female SUB-D 9 remote connection of bus X) |
| Fixing mode | By 4 M6 screws (panel) By clips (35 mm symmetrical DIN rail) |
| Marking | CE |
| Product Weight | 2.56 lb(US) (1.16 kg) |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Harmony XBTGT |
| Product or Component Type | Advanced touchscreen panel |
| Display Type | Backlit colour TFT LCD |
| Display colour | 65536 colours |
| Display Resolution | 800 x 600 pixels SVGA |
| Display size | 10.4 inch |
| Software Type | Configuration software |
| Software Designation | Vijeo Designer |
| Operating System | Harmony |
| Processor name | CPU RISC |
| Processor frequency | 266 MHz |
| Memory description | 512 KB SRAM back up of data lithium battery 32 MB flash EPROM application memory |
| Integrated connection type | RJ45 COM2 serial link RS485 <= 187.5 kbit/s Siemens MPI (187.5 kbits/s) male SUB-D 9 COM1 serial link RS232C/RS422/RS485 <= 115.2 kbits/s removable screw terminal block power supply RJ45 Ethernet TCP/IP 3 removable screw terminal block digital output removable screw terminal block audio output removable screw terminal block digital input 2 USB type A master port (V1.1) |
| Resistance to electrostatic discharge | 6 kV IEC 61000-4-2 level 3 |
| Cut-out dimensions | 259 (+ 1/- 0) x 201 (+ 1/- 0) mm |
Complementary
| Characteristic | Value(s) |
|---|---|
| Touch sensitive zone | 1024 x 1024 |
| Touch panel | Analogue |
| Backlight lifespan | 50000 hours |
| Brightness | 8 levels via touch panel |
| Character font | Taiwanese (traditional Chinese) Chinese (simplified Chinese) Korean Japanese (ANK, Kanji) ASCII (European characters) |
| [Us] rated supply voltage | 24 V DC |
| Supply | External source |
| Supply voltage limits | 19.2â¦28.8 V |
| Inrush current | 30 A |
| Power Consumption in W | 30 W |
| Local signalling | 1 LED (green or orange) for normal operation or backlighting faulty |
| Number of pages | Limited by internal memory capacity |
| Downloadable protocols | Telemecanique Modicon FIPWAY Telemecanique Modicon Modbus Plus Telemecanique Modicon Modbus TCP Telemecanique Modicon Modbus Mitsubishi Melsec third party protocols Omron Sysmac third party protocols Rockwell Automation Allen-Bradley third party protocols Siemens Simatic third party protocols Telemecanique Modicon Uni-TE |
| Realtime clock | Built-in |
| Data storage equipment | 1 Compact Flash card >= 1 GB |
| Use of slot | For 1 fieldbus communication card (Device Net, Profibus DP) |
| Port Ethernet | 10BASE-T/100BASE-TX |
| Product mounting | Flush mounting |
| Fixing Mode | By 4 screw clamps By 4 spring clips |
| Front material | Aluminium alloy |
| Enclosure Material | PPT |
| Marking | CE |
| Width | 10.6 in (270.5 mm) |
| Height | 8.4 in (212.5 mm) |
| Depth | 2.2 in (57 mm) |
| Product Weight | 5.5 lb(US) (2.5 kg) |
TeSys H ultra compact reverse safety starter, 3 poles, 2.4A/500V AC-53, for control and protection of 3-phase motors up to 0.75kW@400V (1HP@480V). The hybrid technology used for power contacts procures ultra compactness (22.5mm width) as well as an extended electrical durability up to 30 million cycles AC-53. It provides control for 2 directions of rotation, an adjustable motor current 0.18-2.4A, class 10A thermal overload protection with auto/manual/remote reset, phase loss and phase unbalanced protection, stall and jam motor protection. To be supplied with 24V DC, it provides logic inputs for FW/RV motor direction and remote reset after thermal tripping, 1C/O contact relay for fault indication, LED status on front face for indication of tripping and motor running. With an integrated Safe Torq Off (STO) function with SIL3 level according IEC61508-1 and PLe level according ISO13849-1, it can be integrated to safety chain applications. DIN rail mounting, spring terminals for control and power, it can be used without derating for ambient temperatures from -25 to 70°C. Multi standards certified (IEC, UL, CCC).
Main
| Characteristic | Value(s) |
|---|---|
| Range | TeSys |
| product name | TeSys Hybrid |
| Device short name | LZ8H |
| Product or Component Type | Reversing ultra-compact starter |
| Motor starter type | Direct on line |
| Poles description | 3P |
| [Ue] rated operational voltage | 500 V AC |
| [Ie] rated operational current | 2.4 A 500 V AC-51 2.4 A 500 V AC-53A 2.4 A 500 V AC-51 mounting side by side 2.4 A 500 V AC-53A mounting side by side |
| Thermal protection adjustment range | 0.18â¦2.4 A |
| Motor power kW | 0.37 kW 220 V AC 0.65 0.37 kW 230 V AC 0.65 0.75 kW 380 V AC 0.65 0.75 kW 400 V AC 0.65 0.75 kW 415 V AC 0.65 0.75 kW 440 V AC 0.65 1.1 kW 500 V AC 0.65 |
| Maximum Horse Power Rating | 0.5 hp 200 V AC 0.5 hp 230 V AC 1 hp 460 V AC |
| [Uc] control circuit voltage | 24 V DC |
| Safety level | SIL 3 IEC 61508-1 stop function PL = e ISO 13849-1 stop function SIL 2 IEC 61508-1 motor protection |
| Safety reliability data | MTTFd = 517 years stop function PFHd = 2.67E-9 1/h stop function SFF = 99 % stop function SFF = 99 % motor protection MTTFd = 447 years motor protection |
| Thermal overload class | Class 10A IEC 60947-4-2 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Auxiliary contact composition | 1 C/O fault signalling |
| Control circuit voltage limits | 19.2...30 V DC |
| Current consumption | <= 40 mA 24 V DC |
| Reset | Manual Electrical reset |
| Electrical durability | 30 Mcycles |
| Maximum operating rate | 120 cyc/mn AC-51 50 % 6 cyc/mn AC-53A 50 % |
| Mounting Mode | By clips |
| Mounting Support | DIN rail |
| Connections - terminals | spring clamp terminals 1 0.0003â¦0.004 in² (0.2â¦2.5 mm²) rigid spring clamp terminals 1 0.0004â¦0.004 in² (0.25â¦2.5 mm²) flexible - with cable end spring clamp terminals 1 0.0003â¦0.004 in² (0.2â¦2.5 mm²) flexible - without cable end |
| Certifications | ATEX as associated device for motor protection in zones 1 and 21 CE CULus |
| Standards | IEC 60947-4-2 UL 60947-4-1 |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz |
| [Uimp] rated impulse withstand voltage | 6 kV |
| pollution degree | 2 |
| Width | 0.9 in (22.5 mm) |
| Height | 3.9 in (99 mm) |
| Depth | 4.5 in (114.5 mm) |
| Product Weight | 7.5 oz (212 g) |
inductive sensor XS1 M18 - L64mm - brass - Sn5mm - 12..24VDC - M12
TeSys K contactor - 3P - AC-3 <= 440 V 6 A - 1 NO aux. - 220...230 V AC coil
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
