Buy Best selling products Industrial Automation Parts

Schneider AS-8535-000 Schneider

€513,95

Only 1 unit left

AS 8535 000 AS8535000 800 Series I-O Connector

ABB 1SBL183001R8110 ABB

€452,95

Only 3 units left

Buy the ABB 1SBL183001R8110 - a genuine ABB industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The ABB 1SBL183001R8110 is a direct drop-in replacement for existing installations and ships ready for integration.

Schneider AS-J475-000 Schneider

€1.059,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Honeywell T775A1035 Honeywell

€577,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Rexroth R901015613 Rexroth

€2.145,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Honeywell STD870-J1HS6AS-1-A-CHC-11S-A-50A2-00-0000 Honeywell

€6.159,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Rexroth R900954642 Rexroth

€5.659,95

Only 3 units left

Buy the Bosch Rexroth R900954642 Hydraulic Valve - a precision hydraulic control valve for directional, flow, or pressure control. Features robust spool design, low leakage, and long service life. The Bosch Rexroth R900954642 is a direct replacement for existing hydraulic valve installations.

Schneider 155-246B Schneider

€1.547,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Schneider ATV312HU40N4B Schneider

€694,95

Only 1 unit left

Main

Characteristic	Value(s)
Range of Product	Altivar 312
Product or Component Type	Variable speed drive
Product destination	Asynchronous motors
Product Specific Application	Simple machine
Assembly style	With heat sink
Component name	ATV312
Motor power kW	4 kW
Maximum Horse Power Rating	5 hp
[Us] rated supply voltage	380...500 V - 15...10 %
Supply frequency	50...60 Hz - 5...5 %
Phase	3 phase
Line current	13.9 A 380 V, Isc = 5 kA 10.6 A 500 V
EMC filter	Integrated
Apparent power	9.2 kVA
Maximum transient current	14.3 A 60 s
Power dissipation in W	150 W at nominal load
Speed range	1â¦50
Asynchronous motor control profile	Sensorless flux vector control with PWM type motor control signal Factory set : constant torque
Electrical connection	L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0.008 inÂ² (5 mmÂ²) AWG 10
Supply	Internal supply for logic inputs 19...30 V 100 mA overload and short-circuit protection Internal supply for reference potentiometer (2.2 to 10 kOhm) 10...10.8 V 10 mA overload and short-circuit protection
Communication Port Protocol	CANopen Modbus
IP degree of protection	IP20 on upper part without cover plate IP21 on connection terminals IP31 on upper part IP41 on upper part
Option card	Communication card CANopen daisy chain Communication card DeviceNet Communication card Fipio Communication card Modbus TCP Communication card Profibus DP

Complementary

Characteristic	Value(s)
Supply voltage limits	323â¦550 V
Prospective line Isc	5 kA
Continuous output current	9.5 A 4 kHz
Output frequency	0â¦500 Hz
Nominal switching frequency	4 kHz
Switching frequency	2...16 kHz adjustable
Transient overtorque	170â¦200 % of nominal motor torque
Braking torque	150 % 60 s with braking resistor 100 % with braking resistor continuously 150 % without braking resistor
Regulation loop	Frequency PI regulator
Motor slip compensation	Suppressable Adjustable Automatic whatever the load
Output voltage	<= power supply voltage
Tightening torque	L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- 10.6 lbf.in (1.2 N.m)
Insulation	Electrical between power and control
Acceleration and deceleration ramps	S, U or customized Linear adjustable separately from 0.1 to 999.9 s
Braking to standstill	By DC injection
Protection type	Input phase breaks drive Line supply overvoltage and undervoltage safety circuits drive Line supply phase loss safety function, for three phases supply drive Motor phase breaks drive Overcurrent between output phases and earth (on power up only) drive Overheating protection drive Short-circuit between motor phases drive Thermal protection motor
Insulation resistance	>= 500 mOhm 500 V DC for 1 minute
Local signalling	1 LED (red) for drive voltage Four 7-segment display units for CANopen bus status
Time constant	5 ms for reference change
Frequency resolution	Analog input 0.1...100 Hz Display unit 0.1 Hz
Connector type	1 RJ45 Modbus/CANopen
Physical interface	RS485 multidrop serial link
Transmission frame	RTU
Transmission Rate	10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen 4800, 9600 or 19200 bps Modbus
Number of addresses	1â¦127 CANopen 1â¦247 Modbus
Number of drive	127 CANopen 31 Modbus
Marking	CE
Operating position	Vertical +/- 10 degree
Outer dimension	215 x 185 x 158 mm 184 x 140 x 150 mm 402 x 239 x 192 mm
Height	7.2 in (184 mm)
Width	5.6 in (142 mm)
Depth	6.0 in (152 mm)
Product Weight	6.8 lb(US) (3.1 kg)

Schneider ATV312HU22S6 Schneider

€1.316,95

Only 1 unit left

This Altivar 312 3-phase variable speed drive has a rated power of 2.2kW, 5.8kVA, and a 525V to 600V AC rated output voltage. It is suitable for industrial machines such as materials handling and packaging, packing, textile machines, special machines, pumps and fans. It has a compact form-factor with 142mm width, allowing for a flexible and easy installation on a mounting plate. It also offers a snap-lock seal, status and faults display and a jog dial navigation button. It offers high readability of key parameters thanks to a bright LED 4-digit display. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime.

Main

Characteristic	Value(s)
Range of Product	Altivar 312
Product or Component Type	Variable speed drive
Product destination	Asynchronous motors
Product Specific Application	Simple machine
Assembly style	With heat sink
Component name	ATV312
Motor power kW	2.2 kW
Maximum Horse Power Rating	3 hp
[Us] rated supply voltage	525...600 V - 15...10 %
Supply frequency	50...60 Hz - 5...5 %
Phase	3 phase
Line current	6.4 A 525 V, Isc = 5 kA 5.6 A 600 V
EMC filter	Without EMC filter
Apparent power	5.8 kVA
Maximum transient current	5.9 A 60 s
Power dissipation in W	62 W at nominal load
Speed range	1â¦50
Asynchronous motor control profile	Sensorless flux vector control with PWM type motor control signal Factory set : constant torque
Electrical connection	Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 0.004 inÂ² (2.5 mmÂ²) AWG 14 L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0.008 inÂ² (5 mmÂ²) AWG 10
Supply	Internal supply for logic inputs 19...30 V 100 mA overload and short-circuit protection Internal supply for reference potentiometer (2.2 to 10 kOhm) 10...10.8 V 10 mA overload and short-circuit protection
Communication Port Protocol	CANopen Modbus
IP degree of protection	IP20 on upper part without cover plate IP21 on connection terminals IP31 on upper part IP41 on upper part
Option card	Communication card CANopen daisy chain Communication card DeviceNet Communication card Fipio Communication card Modbus TCP Communication card Profibus DP

Complementary

Characteristic	Value(s)
Supply voltage limits	446.25â¦660 V
Prospective line Isc	5 kA
Continuous output current	3.9 A 4 kHz
Output frequency	0â¦500 Hz
Nominal switching frequency	4 kHz
Switching frequency	2...16 kHz adjustable
Transient overtorque	170â¦200 % of nominal motor torque
Braking torque	150 % 60 s with braking resistor 100 % with braking resistor continuously 150 % without braking resistor
Regulation loop	Frequency PI regulator
Motor slip compensation	Suppressable Adjustable Automatic whatever the load
Output voltage	<= power supply voltage
Tightening torque	Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 5.3 lbf.in (0.6 N.m) L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- 10.6 lbf.in (1.2 N.m)
Insulation	Electrical between power and control
Analogue input number	3
Analogue input type	AI1 configurable voltage 0...10 V 30 V max 30000 Ohm AI2 configurable voltage +/- 10 V 30 V max 30000 Ohm AI3 configurable current 0...20 mA 250 Ohm
Sampling duration	AI1, AI2, AI3 8 ms analog LI1...LI6 4 ms discrete
Response time	AOV, AOC 8 ms analog R1A, R1B, R1C, R2A, R2B 8 ms discrete
Linearity error	+/- 0.2 % output
Analogue output number	1
Analogue output type	AOC configurable current 0...20 mA 800 Ohm 8 bits AOV configurable voltage 0...10 V 470 Ohm 8 bits
Discrete input logic	Logic input not wired LI1...LI4), < 13 V Negative logic (source) LI1...LI6), > 19 V Positive logic (source) LI1...LI6), < 5 V, > 11 V
Discrete output number	2
Discrete output type	Configurable relay logic R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles Configurable relay logic R2A, R2B) NC - 100000 cycles
Minimum switching current	R1-R2 10 mA 5 V DC
Maximum switching current	R1-R2 2 A 250 V AC inductive, cos phi = 0.4 7 ms R1-R2 2 A 30 V DC inductive, cos phi = 0.4 7 ms R1-R2 5 A 250 V AC resistive, cos phi = 1 0 ms R1-R2 5 A 30 V DC resistive, cos phi = 1 0 ms
Discrete input number	6
Discrete input type	LI1...LI6) programmable 24 V, 0â¦100 mA PLC 3500 Ohm
Acceleration and deceleration ramps	Linear adjustable separately from 0.1 to 999.9 s S, U or customized
Braking to standstill	By DC injection
Protection type	Input phase breaks drive Line supply overvoltage and undervoltage safety circuits drive Line supply phase loss safety function, for three phases supply drive Motor phase breaks drive Overcurrent between output phases and earth (on power up only) drive Overheating protection drive Short-circuit between motor phases drive Thermal protection motor
Insulation resistance	>= 500 mOhm 500 V DC for 1 minute
Local signalling	1 LED (red) for drive voltage Four 7-segment display units for CANopen bus status
Time constant	5 ms for reference change
Frequency resolution	Analog input 0.1...100 Hz Display unit 0.1 Hz
Connector type	1 RJ45 Modbus/CANopen
Physical interface	RS485 multidrop serial link
Transmission frame	RTU
Transmission Rate	10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen 4800, 9600 or 19200 bps Modbus
Number of addresses	1â¦127 CANopen 1â¦247 Modbus
Number of drive	127 CANopen 31 Modbus
Marking	CE
Operating position	Vertical +/- 10 degree
Height	7.2 in (184 mm)
Width	5.6 in (142 mm)
Depth	6.0 in (152 mm)
Product Weight	6.4 lb(US) (2.9 kg)

Rexroth R900932453 Rexroth

€2.298,95

Only 3 units left

Buy the Bosch Rexroth R900932453 Hydraulic Valve - a precision hydraulic control valve for directional, flow, or pressure control. Features robust spool design, low leakage, and long service life. The Bosch Rexroth R900932453 is a direct replacement for existing hydraulic valve installations.

Yaskawa CIPR-GA80U4168ABMA-AAAANA Yaskawa

€10.106,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

ABB 266HSHWSBA1E6L5B6N2 ABB

€3.308,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Honeywell ST9120C5013 Honeywell

€325,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Honeywell STT850-S-0-A-DDA-11S-A-01A0-00-0000 Honeywell

€396,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Honeywell STT850-S-0-A-AHA-11S-A-10A0-00-0000 Honeywell

€3.384,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

ABB 266DDHFSSA2S1-E6I2N2 ABB

€1.628,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Rexroth R900914688 Rexroth

€838,95

Only 3 units left

Buy the Bosch Rexroth R900914688 Hydraulic Valve - a precision hydraulic control valve for directional, flow, or pressure control. Features robust spool design, low leakage, and long service life. The Bosch Rexroth R900914688 is a direct replacement for existing hydraulic valve installations.

Schneider A9N18568 Schneider Electric

€264,95

Only 1 unit left

Vigi C120 - earth leakage add-on block - 3P - 500 mA - class AC

ABB 1SDA066324R1 ABB SOR-C XT1..XT4 F/P 110-127Vac-110-125Vdc

€330,95

Only 1 unit left

ABB EcoSolutions

Environmental Product Declaration - EPD:

EPD Shunt opening releases Tmax XT XT1...XT4 (IT)

EPD Shunt opening releases Tmax XT XT1...XT4 (CN)

EPD Shunt opening releases Tmax XT XT1...XT4 (IT)

EPD Shunt opening releases Tmax XT XT1...XT4 (CN)

Material Compliance

REACH Declaration:

REACh Declaration ABB Sace circuit breakers

RoHS Information:

RoHS Declaration ABB Sace circuit breakers

RoHS Status:

Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019

Conflict Minerals Reporting Template (CMRT):

CMRT - Conflict Minerals Reporting Template

Toxic Substances Control Act - TSCA:

Toxic Substances Control Act (TSCA) declaration

Environmental

Environmental Information:

Breakers - Packaging disposal information

Ordering

Order Code US and Canada:

KXTASORCFPD

E-Number (Finland):

3638709

E-Number (Norway):

4384928

E-Number (Sweden):

3182060

EAN:

8015644002329

Minimum Order Quantity:

1 piece

Customs Tariff Number:

85389099

Dimensions

Product Net Weight:

0.115 kg

Container Information

Package Level 1 Units:

box 1 piece

Package Level 1 Width:

110 mm

Package Level 1 Height:

60 mm

Package Level 1 Depth / Length:

140 mm

Package Level 1 Gross Weight:

0.121 kg

Package Level 1 EAN:

8015644002329

Additional Information

Product Main Type:

Accessories for Tmax XT

Product Name:

Accessory

Product Type:

Accessory

Suitable For:

XT1, XT2, XT3, XT4

Suitable for Product Class:

SACE Tmax XT

Technical

Configuration Type:

Loose or configurable

Current Type:

AC/DC

Order Multiple:

1 piece

Rated Voltage (U_r):

110 ... 127 V AC

110 ... 125 V DC

110 ... 127 V AC

110 ... 125 V DC

Standards:

IEC60947-2

UL489

IEC60947-2

UL489

Certificates and Declarations

Data Sheet, Technical Information:

Declaration of Conformity - CE:

Refer to the EU Declaration of the relative Circuit Breaker

Instructions and Manuals:

SOR/PS-SOR - Wired and non-wired opening release for XT1-XT2-XT3-XT4, Fixed/ Plug in CB

External Classifications and Standards

ETIM 9:

EC002483 - Switch spool for power circuit breaker

ETIM 10:

EC002483 - Switch spool for power circuit breaker

IDEA Granular Category Code (IGCC):

4879 >> Shunt release (for power circuit breaker)

Object Classification Code:

Q

UNSPSC:

39121601

WEEE Category:

5. Small Equipment (No External Dimension More Than 50 cm)

eClass:

V11.1 : 27370421

ABB 2CSG152130R1202 ABB - ELR96

€290,95

Only 1 unit left

Technical

Type of Residual Current:

Type A

Function:

For mixed system

Current Rating:

Response value amperage 1 30 ... 30 mA

Response value amperage 2 30000 ... 30000 mA

Response value amperage 1 30 ... 30 mA

Response value amperage 2 30000 ... 30000 mA

Number of Contacts:

1

Delay Time (τ):

Delay-On Energization, Maximum, Permitted 5 second [unit of time]

Delay-On Energization, Minimum, Adjustable 0 second [unit of time]

Delay-On Energization, Maximum, Permitted 5 second [unit of time]

Delay-On Energization, Minimum, Adjustable 0 second [unit of time]

Filter Option:

no frequency filter

Options Provided:

Pre-alarm threshold: no

Electrical

Rated Voltage (U_r):

110...400 V

Rated Operational Voltage:

115-230-400 V AC

Rated Control Supply Voltage (U_s):

(50 Hz) 110...400 V

(50 Hz) 110...400 V

(60 Hz) 110...400 V

(60 Hz) 110...400 V

(DC) 110...400 V

(DC) 110...400 V

(50 Hz) 110...400 V

(50 Hz) 110...400 V

(60 Hz) 110...400 V

(60 Hz) 110...400 V

(DC) 110...400 V

(DC) 110...400 V

Rated Frequency (f):

50 … 60 Hz

Power Loss:

at Rated Operating Conditions per Pole 4 W

Number of Contacts CO:

1

Number of Contacts NC:

0

Number of Contacts NO:

0

Material Compliance

RoHS Information:

EU Declaration of Conformity_ELR+TR

RoHS Status:

Following EU Directive 2011/65/EU

RoHS Date:

20200527

Conflict Minerals Reporting Template (CMRT):

Conflict Minerals Reporting Template

WEEE Category:

5. Small Equipment (No External Dimension More Than 50 cm)

WEEE B2C / B2B:

Business To Business

Dimensions

Product Net Width:

96 mm

Product Net Height:

96 mm

Product Net Depth / Length:

78 mm

Product Net Weight:

209 g

Ordering

Package Level 1 Units:

box 1 piece

Package Level 1 Gross Weight:

0.28 kg

Certificates and Declarations

Declaration of Conformity - CE:

EU Declaration of Conformity_ELR+TR

Installation

Instructions and Manuals:

ELR96 and ELR96V24 Instruction sheet

Mounting Type:

Front Panel

Popular Downloads

Data Sheet, Technical Information:

9AKK107046A0424

External Classifications and Standards

ETIM 9:

EC001445 - Residual current monitoring relay

ETIM 10:

EC001445 - Residual current monitoring relay

eClass:

V11.0 : 27371809

Object Classification Code:

F

Standards:

IEC EN 60947-2 Ann M

Keyence FU-83A Keyence

€911,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

ABB 22217-K-C3 ABB

€330,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Honeywell TR40-H Honeywell

€367,95

Only 1 unit left

Honeywell sensors, proven reliability, offering a wide range of sensors to fit almost any HVAC application need.Wall Modules, Wall Module, Temperature and Relative Humidity, Sylk-Bus Interface