Filters

Prosoft

144 products

Showing 49 - 72 of 144 products

Showing 49 - 72 of 144 products
View
MVI46-DFNT Prosoft
Prosoft MVI46-DFNT Prosoft
$1,593.78
Only 3 units left
The EtherNet/IP Client/Server Network Interface Module allows SLC processors to interface with EtherNet/IP protocol (Explicit Messaging) compatible devices and hosts. The SLC 5/05 with the MVI46-DFNT module provides a second EtherNet/IP port to a separate subnet for communicating with a HMI or SCADA host. For other SLC processors the module provides a serial pass-thru channel 0 service for remote Ethernet programming and troubleshooting.
MVI46-GEC Prosoft
Prosoft MVI46-GEC Prosoft
$2,080.01
Only 2 units left
The Generic ASCII Ethernet Network Interface Module (MVI46-GEC) allows SLC processors to connect to any generic ASCII device such as bar code scanners, weigh scale interfaces, legacy ASCII protocol connections, terminal port emulation and printer drivers. The use of the TCP/IP protocol at the device level on the plant floor has become widespread. The MVI46-GEC takes advantage of Ethernet’s speed while also allowing greater distances between networked devices.
MVI46-GSC Prosoft
Prosoft MVI46-GSC Prosoft
$1,462.99
Only 4 units left
The Generic Serial ASCII Network Interface Module is a fast and easy way to add two fully configurable ASCII communication ports to the SLC platform without consuming the front port of the processor. This allows the SLC processor to interface with any generic ASCII device such as bar code scanners, weigh scale interfaces, legacy ASCII protocol connections, terminal port emulation and printer drivers. Each port supports the sending and receiving of large ASCII character strings and is individually configurable.
MVI46-MBP Prosoft
Prosoft MVI46-MBP Prosoft
$3,340.50
Only 3 units left
The MVI46 Modbus Plus Dual Port Network Interface Module allow Rockwell Automation SLC processors to connect directly on Modbus Plus networks as a peer. The module acts as an input/output module between the Modbus Plus network and the processor. Compatible devices can be found in most industries and include devices such as drives, relays and power monitor hardware.
MVI46-MCM Prosoft
Prosoft MVI46-MCM Prosoft
$2,394.00
Only 4 units left
The MVI46 Modbus Master/Slave Network Interface Module allows Rockwell Automation SLC processors to interface with Modbus-compatible devices. Compatible devices include not only Modicon PLCs but also a wide assortment of third-party devices found in nearly every industry.
MVI46-MNET Prosoft
Prosoft MVI46-MNET Prosoft
$5,482.50
Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
MVI46-MNETC Prosoft
Prosoft MVI46-MNETC Prosoft
$1,328.26
Only 1 unit left
The MVI46 Modbus TCP/IIP Multi Client Network Interface allows Rockwell Automation SLC processors to interface easily with multiple Modbus TCP/IP server-compatible instruments and devices. The Multi Client module improves performance when controlling multiple servers on a Modbus TCP/IP network, by supporting up to 30 devices.
MVI46-PDPMV1 Prosoft
Prosoft MVI46-PDPMV1 Prosoft
$1,413.90
Only 1 unit left
The MVI46 PROFIBUS DP-V1 Master Network Interface Module allows SLC processors to easily communicate with slave devices supporting PROFIBUS DP-V0 and DP-V1 protocol. The module acts as an input/output module between the PROFIBUS network and the processor supporting complete Master specifications according to IEC 61158.
MVI46-PDPS Prosoft
Prosoft MVI46-PDPS Prosoft
$0.00
Sold Out
The MVI46 PROFIBUS DP Slave Communication Module allows Rockwell Automation SLC I/O compatible processors to interface easily with a PROFIBUS DP Master device.
MVI56 Prosoft
Prosoft MVI56 Prosoft
$1,284.78
Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
MVI56-101S Prosoft
Prosoft MVI56-101S Prosoft
$0.00
Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
MVI56-ADM Prosoft
Prosoft MVI56-ADM Prosoft
$1,970.17
Only 3 units left
The MVI56 Application Development Module is a ControlLogix backplane compatible module that allows user-developed 'C' applications to operate on the ControlLogix platform. A great way to speed up custom ASCII data communications or to protect a proprietary algorithm, the ADM is a powerful tool for the ControlLogix platform.
MVI56-ADMNET Prosoft
Prosoft MVI56-ADMNET Prosoft
$0.00
Sold Out
The MVI56 Application Development Communication Module with Ethernet is a ControlLogix backplane compatible module that allows Rockwell Automation ControlLogix processors to interface easily with Ethernet protocol (Explicit Messaging) compatible devices and hosts utilizing custom 'C' code. Devices commonly supporting the protocol include Rockwell Automation PLCs, and host HMI systems.
MVI56-AFC Prosoft
Prosoft MVI56-AFC Prosoft
$2,520.35
Only 2 units left
The MVI56 Gas and Liquid Flow Computer Module is a ControlLogix backplane compatible module that allows ControlLogix processors to easily support flow applications performing measurement of hydrocarbon gases or liquids using AGA 3, 7, 8 and API MPMS Chapters 11 and 12 measurement standards. The module calculates flow rates, accumulated volumes, accumulated mass and accumulated energy (heating value). The calculation results are transferred back to the Processor memory for use in the application ladder program or for transfer back to a SCADA host. The MVI56-AFC Gas and Liquid Flow Computer product has been approved by Industry Canada's Measurement for complying with Provisional Specifications and Procedures for the approval of Correction Devices and Linearization Functions Incorporated in Meters and Flow Computers.
MVI56-BAS Prosoft
Prosoft MVI56-BAS Prosoft
$2,316.50
Only 3 units left
This single-slot module is a powerful solution that allows the large installed base of legacy BASIC programs for the 1771-DB and 1747-BAS modules to be migrated to the ControlLogix platform with minimal effort.
MVI56-DFCM Prosoft
Prosoft MVI56-DFCM Prosoft
$3,641.80
Only 4 units left
When needing additional DF1 ports in your ControlLogix system, the MVI56-DFCM Network Interface Module is the fastest and easiest way to add DF1 Half/Full Duplex Master and Slave capability. This module has two powerful and fully configurable DF1 ports allowing the many SCADA and field devices supporting the DF1 protocol to be integrated into the ControlLogix platform. Devices commonly supporting the protocol include Rockwell Automation PLCs and power monitoring equipment, as well as several other third party devices. Each port is user-configurable to act as a Master or as a slave.
MVI56-DNP Prosoft
Prosoft MVI56-DNP Prosoft
$9,292.45
Only 2 units left
The DNP 3.0 Master/Slave Network Interface Module allows ControlLogix processors to interface with the many field devices that support the DNP protocol. DNP (Distributed Network Protocol) is an open communication protocol developed to achieve interoperability among systems specifically in the electric utility, oil & gas and water/wastewater industries. This non-proprietary protocol, available worldwide, was designed to optimize the transmission of data acquisition information and control commands. It is a highly efficient and reliable communications protocol between substation computers, RTUs, IEDs and master stations. DNP is also a layered protocol, featuring time stamping and True Report by Exception (TRBE). These features allow the MVI56-DNP module to send a report to the processor without being polled, providing real time data transmission in critical situations.
MVI56-DNPSNET Prosoft
Prosoft MVI56-DNPSNET Prosoft
$1,851.91
Only 3 units left
The DNP 3.0 Ethernet Server Network Interface Module allows ControlLogix processors to interface with the many field devices that support the DNP protocol over Ethernet. DNP (Distributed Network Protocol) is an open communication protocol developed to achieve interoperability among systems specifically in the electric utility, oil & gas and water/wastewater industries. This non-proprietary protocol, available worldwide, was designed to optimize the transmission of data acquisition information and control commands. It is a highly efficient and reliable communications protocol between substation computers, RTUs, IEDs and master stations. DNP is also a layered protocol, featuring time stamping and True Report by Exception (TRBE). These features allow the MVI56-DNPSNET module to send a report to the processor without being polled, providing real time data transmission in critical situations.
MVI56-GEC Prosoft
Prosoft MVI56-GEC Prosoft
$1,793.57
Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
MVI56-GSC Prosoft
Prosoft MVI56-GSC Prosoft
$3,185.92
Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
MVI56-HART MVI56 Prosoft
Prosoft MVI56-HART MVI56 Prosoft
$754.65
Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
MVI56-MBP Prosoft
Prosoft MVI56-MBP Prosoft
$3,007.76
Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
MVI56-MCM Prosoft
Prosoft MVI56-MCM Prosoft
$1,462.06
Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
MVI56-MDA4 Prosoft
Prosoft MVI56-MDA4 Prosoft
$337.50
Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Recently viewed