Keyence

GC-1000R Keyence

Specifications

Model		GC-1000R
Input/output points	Safety inputs	14
	Safety outputs	4
	Safety relay output	1 (3a)
	AUX outputs	4
	Test outputs
Maximum number of connectable expansion units		-
Maximum number of connectable remote I/O modules
GC-Link ports		2 ports
Safety input specifications	Input device	Contact output device or PNP output device
	Input type	Type3
	ON level (voltage/current)	Min. 11 V/2 mA
	OFF level (voltage/current)	Max. 5 V/1.5 mA
	Short-circuit current	Si 0 to 3: Approx. 5 mA Si 4 to 13: Approx. 3 mA
	Protection circuit	Surge protection circuit, wrong wiring protection circuit
	Maximum cable length	Max. 100 m 328.1'
Safety output specifications	Output type	PNP transistor output (DC-13, Type 0.5, Protected outputs)^*1
	Maximum load current	500 mA
	Residual voltage (during ON)	Max. 2.0 V
	Leakage current (during OFF)	Max. 0.5mA
	Maximum capacitive load	0.5 µF
	Load wiring resistance	Max. 2.5Ω
	Protection circuit	Overcurrent protection circuit, reverse connection protection circuit
	Maximum cable length	Max. 30 m 98.4'
Safety relay output specifications	Output type	Relay (3a) (Externally-protected outputs)^*2
	Rated load (resistance load)	250 VAC 6A / 30 VDC 6A^*3
	Rated load (inductive load)	240 VAC 2A (AC-15) / 24 VDC 1A (DC-13)
	Relay output mechanical life	Resistance load (250 VAC 6A/30 VDC 6A): Min. 100,000 times Resistance load (250 VAC 1A/30 VDC 1 A): Min. 500,000 times Inductive load (AC-15: 240 VAC 2 A): Min. 100,000 times (cosø = 0.3) Inductive load (DC-13: 24 VDC 1 A): Min. 100,000 times (L/R = 48 ms)
	Maximum cable length	Max. 100 m 328.1'
	B10d	With rated load: 400,000 times With low load: 2,000,000 times
Test output specifications	Output type	PNP transistor output^*4
	Maximum load current	100 mA
	Protection circuit	Overcurrent protection circuit, reverse connection protection circuit
	Maximum cable length	Max. 100 m 328.1'^*5
AUX output specifications	Output type	Transistor output (PNP/NPN selectable by wiring) PNP output (DC-13, Type 0.1, Protected outputs)^1^4
	Maximum load current	PNP: 100 mA, NPN: 20 mA
	Residual voltage (during ON)	Max. 2.0 V
	Leakage current (during OFF)	Max. 0.5 mA
	Protection circuit	Overcurrent protection circuit, reverse connection protection circuit
	Maximum cable length	Max. 30 m 98.4'
Communication interface	USB	USB2.0
	Ethernet	-
Network functionality
Others	LCD display	1.77-inch color LCD
	Display buttons	4 points (3 operation keys + 1 BACK key)
Applicable standards	EMC	EMS: IEC 61131-2/-6, EN61131-2/-6 EMI: IEC 61131-2, FCC Part15B Class A, ICES-003, Class A
	Safety	IEC 61508, EN 61508 SIL3 IEC62061 SIL CL3 ISO/EN13849-1:2015 Cat. 4, PL e, UL1998
Dimensions		85×95×90 mm 3.35"×3.74"×3.54" (W×D×H)
Power supply	Power voltage	24 VDC (-20 to +20%) Class 2
	Power consumption	Max. 200 mA
Environmental resistance	Ambient temperature	−10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	5 to 85% (No condensation)
	Storage temperature	−25 to +70 °C -13 to 158 °F (No freezing)
	Operating altitude	Max. 2000 m 6561.7'
	Overvoltage category	II III (relay output part of GC-1000R and GC-S1R)
	Pollution degree	2
	Vibration resistance	Frequency: 5 to 9 Hz, Half amplitude: 3.5 mm 0.14" Frequency: 9 to 150 Hz, Acceleration: 10 m/s² 10 times each in X, Y, Z directions
	Shock resistance	Acceleration: 150 m/s², Operating time: 11 ms, 3 times each in X, Y, Z directions
Material		Polycarbonate
Weight		Approx. 360 g
^1 Paragraph 6.4.6 Temporary overload of IEC 61131-2 supports up to 1.2 times the maximum load current. ^2 To comply with the requirements of IEC61131-2, connect 10 A fast blow fuse (IEC 60217) in series to each contact. ^3 Check the derating characteristics described later. ^4 AUX outputs (NPN output) and test outputs do not comply with paragraph 6.4.6 of IEC 61131-2. ^*5 When the test output is branched and connected to multiple safety input devices, the total branched cable length must not exceed 400 m 1312.3'.

$1,073.40

1-year warranty

FREE WORDWIDE SHIPPING

Est. delivery between and

Condition:

Sealed Surplus

SKU: GC-1000R-Sealed

10 verified stock

$1,073.40

Never Used Surplus

SKU: GC-1000R

4 verified stock

$966.00

Used

SKU: GC-1000R-Used

4 verified stock

$600.60

Variant

Quantity:

Need More?

Specifications

Model		GC-1000R
Input/output points	Safety inputs	14
	Safety outputs	4
	Safety relay output	1 (3a)
	AUX outputs	4
	Test outputs
Maximum number of connectable expansion units		-
Maximum number of connectable remote I/O modules
GC-Link ports		2 ports
Safety input specifications	Input device	Contact output device or PNP output device
	Input type	Type3
	ON level (voltage/current)	Min. 11 V/2 mA
	OFF level (voltage/current)	Max. 5 V/1.5 mA
	Short-circuit current	Si 0 to 3: Approx. 5 mA Si 4 to 13: Approx. 3 mA
	Protection circuit	Surge protection circuit, wrong wiring protection circuit
	Maximum cable length	Max. 100 m 328.1'
Safety output specifications	Output type	PNP transistor output (DC-13, Type 0.5, Protected outputs)^*1
	Maximum load current	500 mA
	Residual voltage (during ON)	Max. 2.0 V
	Leakage current (during OFF)	Max. 0.5mA
	Maximum capacitive load	0.5 µF
	Load wiring resistance	Max. 2.5Ω
	Protection circuit	Overcurrent protection circuit, reverse connection protection circuit
	Maximum cable length	Max. 30 m 98.4'
Safety relay output specifications	Output type	Relay (3a) (Externally-protected outputs)^*2
	Rated load (resistance load)	250 VAC 6A / 30 VDC 6A^*3
	Rated load (inductive load)	240 VAC 2A (AC-15) / 24 VDC 1A (DC-13)
	Relay output mechanical life	Resistance load (250 VAC 6A/30 VDC 6A): Min. 100,000 times Resistance load (250 VAC 1A/30 VDC 1 A): Min. 500,000 times Inductive load (AC-15: 240 VAC 2 A): Min. 100,000 times (cosø = 0.3) Inductive load (DC-13: 24 VDC 1 A): Min. 100,000 times (L/R = 48 ms)
	Maximum cable length	Max. 100 m 328.1'
	B10d	With rated load: 400,000 times With low load: 2,000,000 times
Test output specifications	Output type	PNP transistor output^*4
	Maximum load current	100 mA
	Protection circuit	Overcurrent protection circuit, reverse connection protection circuit
	Maximum cable length	Max. 100 m 328.1'^*5
AUX output specifications	Output type	Transistor output (PNP/NPN selectable by wiring) PNP output (DC-13, Type 0.1, Protected outputs)^1^4
	Maximum load current	PNP: 100 mA, NPN: 20 mA
	Residual voltage (during ON)	Max. 2.0 V
	Leakage current (during OFF)	Max. 0.5 mA
	Protection circuit	Overcurrent protection circuit, reverse connection protection circuit
	Maximum cable length	Max. 30 m 98.4'
Communication interface	USB	USB2.0
	Ethernet	-
Network functionality
Others	LCD display	1.77-inch color LCD
	Display buttons	4 points (3 operation keys + 1 BACK key)
Applicable standards	EMC	EMS: IEC 61131-2/-6, EN61131-2/-6 EMI: IEC 61131-2, FCC Part15B Class A, ICES-003, Class A
	Safety	IEC 61508, EN 61508 SIL3 IEC62061 SIL CL3 ISO/EN13849-1:2015 Cat. 4, PL e, UL1998
Dimensions		85×95×90 mm 3.35"×3.74"×3.54" (W×D×H)
Power supply	Power voltage	24 VDC (-20 to +20%) Class 2
	Power consumption	Max. 200 mA
Environmental resistance	Ambient temperature	−10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	5 to 85% (No condensation)
	Storage temperature	−25 to +70 °C -13 to 158 °F (No freezing)
	Operating altitude	Max. 2000 m 6561.7'
	Overvoltage category	II III (relay output part of GC-1000R and GC-S1R)
	Pollution degree	2
	Vibration resistance	Frequency: 5 to 9 Hz, Half amplitude: 3.5 mm 0.14" Frequency: 9 to 150 Hz, Acceleration: 10 m/s² 10 times each in X, Y, Z directions
	Shock resistance	Acceleration: 150 m/s², Operating time: 11 ms, 3 times each in X, Y, Z directions
Material		Polycarbonate
Weight		Approx. 360 g
^1 Paragraph 6.4.6 Temporary overload of IEC 61131-2 supports up to 1.2 times the maximum load current. ^2 To comply with the requirements of IEC61131-2, connect 10 A fast blow fuse (IEC 60217) in series to each contact. ^3 Check the derating characteristics described later. ^4 AUX outputs (NPN output) and test outputs do not comply with paragraph 6.4.6 of IEC 61131-2. ^*5 When the test output is branched and connected to multiple safety input devices, the total branched cable length must not exceed 400 m 1312.3'.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Specifications

Model		GC-1000R
Input/output points	Safety inputs	14
	Safety outputs	4
	Safety relay output	1 (3a)
	AUX outputs	4
	Test outputs
Maximum number of connectable expansion units		-
Maximum number of connectable remote I/O modules
GC-Link ports		2 ports
Safety input specifications	Input device	Contact output device or PNP output device
	Input type	Type3
	ON level (voltage/current)	Min. 11 V/2 mA
	OFF level (voltage/current)	Max. 5 V/1.5 mA
	Short-circuit current	Si 0 to 3: Approx. 5 mA Si 4 to 13: Approx. 3 mA
	Protection circuit	Surge protection circuit, wrong wiring protection circuit
	Maximum cable length	Max. 100 m 328.1'
Safety output specifications	Output type	PNP transistor output (DC-13, Type 0.5, Protected outputs)^*1
	Maximum load current	500 mA
	Residual voltage (during ON)	Max. 2.0 V
	Leakage current (during OFF)	Max. 0.5mA
	Maximum capacitive load	0.5 µF
	Load wiring resistance	Max. 2.5Ω
	Protection circuit	Overcurrent protection circuit, reverse connection protection circuit
	Maximum cable length	Max. 30 m 98.4'
Safety relay output specifications	Output type	Relay (3a) (Externally-protected outputs)^*2
	Rated load (resistance load)	250 VAC 6A / 30 VDC 6A^*3
	Rated load (inductive load)	240 VAC 2A (AC-15) / 24 VDC 1A (DC-13)
	Relay output mechanical life	Resistance load (250 VAC 6A/30 VDC 6A): Min. 100,000 times Resistance load (250 VAC 1A/30 VDC 1 A): Min. 500,000 times Inductive load (AC-15: 240 VAC 2 A): Min. 100,000 times (cosø = 0.3) Inductive load (DC-13: 24 VDC 1 A): Min. 100,000 times (L/R = 48 ms)
	Maximum cable length	Max. 100 m 328.1'
	B10d	With rated load: 400,000 times With low load: 2,000,000 times
Test output specifications	Output type	PNP transistor output^*4
	Maximum load current	100 mA
	Protection circuit	Overcurrent protection circuit, reverse connection protection circuit
	Maximum cable length	Max. 100 m 328.1'^*5
AUX output specifications	Output type	Transistor output (PNP/NPN selectable by wiring) PNP output (DC-13, Type 0.1, Protected outputs)^1^4
	Maximum load current	PNP: 100 mA, NPN: 20 mA
	Residual voltage (during ON)	Max. 2.0 V
	Leakage current (during OFF)	Max. 0.5 mA
	Protection circuit	Overcurrent protection circuit, reverse connection protection circuit
	Maximum cable length	Max. 30 m 98.4'
Communication interface	USB	USB2.0
	Ethernet	-
Network functionality
Others	LCD display	1.77-inch color LCD
	Display buttons	4 points (3 operation keys + 1 BACK key)
Applicable standards	EMC	EMS: IEC 61131-2/-6, EN61131-2/-6 EMI: IEC 61131-2, FCC Part15B Class A, ICES-003, Class A
	Safety	IEC 61508, EN 61508 SIL3 IEC62061 SIL CL3 ISO/EN13849-1:2015 Cat. 4, PL e, UL1998
Dimensions		85×95×90 mm 3.35"×3.74"×3.54" (W×D×H)
Power supply	Power voltage	24 VDC (-20 to +20%) Class 2
	Power consumption	Max. 200 mA
Environmental resistance	Ambient temperature	−10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	5 to 85% (No condensation)
	Storage temperature	−25 to +70 °C -13 to 158 °F (No freezing)
	Operating altitude	Max. 2000 m 6561.7'
	Overvoltage category	II III (relay output part of GC-1000R and GC-S1R)
	Pollution degree	2
	Vibration resistance	Frequency: 5 to 9 Hz, Half amplitude: 3.5 mm 0.14" Frequency: 9 to 150 Hz, Acceleration: 10 m/s² 10 times each in X, Y, Z directions
	Shock resistance	Acceleration: 150 m/s², Operating time: 11 ms, 3 times each in X, Y, Z directions
Material		Polycarbonate
Weight		Approx. 360 g
^1 Paragraph 6.4.6 Temporary overload of IEC 61131-2 supports up to 1.2 times the maximum load current. ^2 To comply with the requirements of IEC61131-2, connect 10 A fast blow fuse (IEC 60217) in series to each contact. ^3 Check the derating characteristics described later. ^4 AUX outputs (NPN output) and test outputs do not comply with paragraph 6.4.6 of IEC 61131-2. ^*5 When the test output is branched and connected to multiple safety input devices, the total branched cable length must not exceed 400 m 1312.3'.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator

GC-1000R Keyence

Specifications

Specifications

Specifications

GC-1000R Keyence

Specifications

Specifications

Trusted By

You may also like

Recently viewed